Hello, i have some problem with SPFlashtool.
I had this tablet Lenovo A7600H ( 3g Version). While i was using it he start get's error that google service terminated and reboot itself.
After he booted up i get problem with Encrypted Unsuccesfull error. I tried to Hard Reset, but notthing.
So i tried to flash is stock rom with SPFlashTool, he flashed up only the preloader and after that i get error DRAM WRITE FAILED (3154)
I stupidly format the device, and flashed only the preloader. He flashed okay, but after that now every time i try to flash all files from the scatter file, he flash the preloader and after that i get BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069), so i thinked could be the size of the rom, but i find a RU site that have all the firmware for this tablet, tried all version of Jelly bean, Kit kat, lollipop etc, different size, start from 650 mb to 850 mb, but notthing, always this error.
So i did a memory read test, and give me the "ERROR: NAND Flash was not detected!". What can i do? Is really a firmware things, or simply the eMMC is gone and better fine a replacement? thank you in advice
Anybody think can be any solution?
Related
Hello,
I have an Lenovo S960, which is an MTK 6589 Device.
Coming to the Point, Yesterday I my little sis didn't know what did, Phone Got Soft Brick.
Ohk, I tried to Re-Flash the ROM with SP Flash Tool Ver 3.1xx But somehow it got stuck on 18% and got error of brom error s_da_sdmmc_write_failed (3149).
When i tried to Format+All Download with the latest version of SP Flash Tool, it keep saying "Unrecognized Rom Detected".
Now, I tried Flashing the same ROM with different Versions of SP Flash Tool, and Got several Errors. amongst which one error really horrified me, i didn't remember exactly what was that, but it was something like No Valid partition Management Table.
After some research i found that the rom can be Flashed via MTK DROID TOOLS Onlyy, but for which i need Back Up of the Rom, which i didn't have.
The point is:
1) Is there any way to Flash the Rom with SP Flashtool bypassing these errors.
2) I would be very thank ful if any one can provide me the Back Up Rom for Lenovo Vibe X S960.
One more thing, This is my Fiance's Phone, and she's about to kill me if i didn't Give her phone on Sunday..
Please Help me..
Hello,
I've bricked my Mediatek 6589 (UMI X1S) and I've trying to recover it for the last few days, unsuccessfully. I was experiencing several system freezes, so I decided to boot CWM and format everything (system, data, emmc). When I tried to download a stock rom, SPFT detected the device as 'Mediatek Preloader USB VCOM Port', but failed after 'DL 100%'. I've tried different SPFT versions, on Windows 10 and 7, tried Download, Format, Firmware Upgrade, nothing works. I've also tried to find the 'test point' for my phone, but had no luck. Depending on the SPFT version, I get different error messages.
On SP_Flash_Tool_v3.1244.0.sn85:
Sp flash tool error (8200)
(Platform error) the load and target are inconsistent
On SP-Flash-Tool-v5.1528.00:
PMT changed for the ROM; it must be downloaded.
Even though I'm unable to download anything, I'm able to Read from the device, so I hope it's not totally bricked! I downloaded the first 128kb, and confirmed that the preloader is the same as the file from stock rom. It just doesn't start at 0x0 as the scatter file says, but at 0x800 (see hex screenshots). Is this normal?
It seems as if SPFT is doing some check (maybe that PMT), and refuses to download the files. The scatter file doesn't mention any PMT. Is it possible to download it from another working phone?
I should mention, that I had changed the partition layout a few months back (using meteos-mtk6589-rom-edit-optimized_for_4gb-en.apk), to get a larger data partition. I don't know if it's related to that PMT error...
I would appreciate if someone more experienced in these matters could give me a hint on what to try next. I'm also attaching SPFT logs.
Thanks
Format error and catter file in attachment.
What happened:-
I have Micromax A114(Canvas 2.2) which has MT6582 chip. One day when I restart my phone got a screen with white background that says "Encryption Unsuccessful" you need to reset ur phone. I tried to wipe cache and data from recovery it said "unable to mount". So I re-flashed the official stock rom(the one that I was running on my phone) but the flash process was unsuccessful.
You will find all the screenshots here http :// download. pratiyogitadarpanpdf. com/cover/a114flash /index.php
What is the current situation with my phone:-
It is not starting up not even any sign of charging when connected to charger, but when connected to my laptop it shows "Micromax A110 Preloader USB VCOM Port (COM42)" in the device manager. Sometimes it also shows "MediaTek DA USB VCOM Port (COM73)"
What I've tried:-
1. I tried flashing different ROMs compatible with my phone but getting the Brom error s_dl_pmt_err_no_space (5069). So, it is not the problem with the size of ROM, i guess.
1.1 Flashing with "firmware upgrade" option throws "Failed to get PMT info"1.2 Flashing with "download" option says "partition management table is not found. Please use "format+download" option."1.3 Flashing with "format all + download" option throws "Brom error S_DL_PMT_ERR_NO_SPACE (5069)"1.4 When tried to auto format flash (with format flash except bootloader option), it says "S-DL_READ_PT_FAILED(5073)":crying:2. I used different versions of sp_tools from 3.2 to latest version 5. But, still getting the same error with all versions.
3. I tried to readback with sp tools it says OK.
4. When I tried memory test in sp tools with the scatter file of official rom(that was running fine on my phone earlier), it gives error S_DA_SDMMC_WRITE_FAILED (3149) and same old NAND FLASH NOT DETECTED error in the output.
5. But when I flashed only the preloader of the same rom with "format all + download" option, it was formated and flashed successfully.:fingers-crossed: But then try to flash the other files of that same rom, it again shows "Brom error S_DL_PMT_ERR_NO_SPACE (5069)"
6. I don't have Mtk_Droid_Tool backup files for my phone. And it is not detecting my phone.
7. I read other threads on XDA with similar symptoms but no luck.
What should I do now? Help needed.
I tried searching for the solution on the internet continuously for like 4 days and found things that do nothing. Please suggest me what to do? Should I giveup or what? I love my phone very much:crying:. I seriously need your suggestions.:angel: Any help would be highly appreciated.
occurred same problem with my phone canvas 2.2
occurred same problem with my phone canvas 2.2 before 4 days and I am trying to search out any resolution on internet but yet not succeeded; Let's hope someone from XDA will help us in this matter.
mcn18cm said:
occurred same problem with my phone canvas 2.2 before 4 days and I am trying to search out any resolution on internet but yet not succeeded; Let's hope someone from XDA will help us in this matter.
Click to expand...
Click to collapse
fingers crossed
I am facing the same problem! Exactly the same problem with the same device.
Any solution to resolve this error?
Brom error: S_dl_read_pt_fail (5073)
i have the same prlbm .....
do you guyzzz have any solutions...??
I just hard-bricked my phone(Canvas Magnus A117) as well. No luck in finding any solution to this. It was working fine until I decided to reboot it just like that. Got the same errors after trying at the same level.
Same problem happened to my A114
Anyone get their phone rectified?
I had same problem while flashing. I took it to 2-3 places, they said it cannot be rectified. I however did not contact service center. Anyways, did the problem solved for anyone of you
I have a problem with my Paris X device. I had an unofficial rom and I wanted to flash the official one. When I started the flashing process with SP flash tool I got this message: "BROM ERROR: S_INVALID_BBCHIP_TYPE (0x3EB)"
Since that my phone is like dead. I cant switch on, I cant either flash again because my driver disappears in 2 seconds and I got the same error everytime.
Please help me, I would really appreciate it. :fingers-crossed:
hi i also bought paris x last year tried to flash it today using sp flash tool with official android 6 rom everything fine until i clicked download...
pmt changed rom - error #1
so then i looked up im supposed to switch to firmware upgrade but that resulted in error
s_invalid_bbchip_type - error #2
now my phone is bricked and whenever i connect it to my pc it appears for about 2 seconds and then disappears...
well im hoping that someone here could actually help cause this is really frustrating and i need to be able to use my phone next week... :/
thanks for replys
same probleme here
invalid bbchip type (0x3eb)
If anyone have this solution, Then please reply
I have also this type of problem In my Intex ace mini mobile
I also experienced problems like that, and couldn't solve it.... ERROR: S_INVALID_BBCHIP_TYPE (1003)
slekdor50 said:
I also experienced problems like that, and couldn't solve it.... ERROR: S_INVALID_BBCHIP_TYPE (1003)
Click to expand...
Click to collapse
Check the scatter, make sure that the line, i.e. matches the device chip type:
platform: MT6735M < -- is this correct?
peti2ty said:
I have a problem with my Paris X device. I had an unofficial rom and I wanted to flash the official one. When I started the flashing process with SP flash tool I got this message: "BROM ERROR: S_INVALID_BBCHIP_TYPE (0x3EB)"
Since that my phone is like dead. I cant switch on, I cant either flash again because my driver disappears in 2 seconds and I got the same error everytime.
Please help me, I would really appreciate it. :fingers-crossed:
Click to expand...
Click to collapse
I think this is scatter file mismatch, because I have done a proper read back of Inew L4 mt6735 to flash it to another phone with exact same model and build. But that flash file is not even working to flash that phone from which I made it giving this same error.
ERROR: S_INVALID_BBCHIP_TYPE (1003)
Still working on it.
[Update]
Only a single "m" in MT6735M in scatter file was missing, now its working all fine. :fingers-crossed:
I searched the whole internet for years to solve this error...
So if your getting this error better check your scatter platform names etc.....bcz even if you get it from readback or official flash files, like in my case it can give you error.
If you're getting this same error every time so try the above advice and here is a tip for early disconnection, connect while holding volume button or open yiu device and find kcolo[\B] and short it with GND.(better find details from google bcz i am too funding it)
Hi All,
I have a phone that looks like a Samsung S4, but is in fact a Mediatek MT-6572.
As the installed software did not allow me to open lots of apps, I decided to give rooting and reflashing a go.
I managed to root the device, had super SU installed and then tried to find a ROM that worked.
In that process I managed to (accidentally) format the bootloader.
At present the phone is only being recognised by SP Flashtool (as an MT-6572).
I can do a format, no problem.
I can start the flashing, but always get some sort of error.
At first it was the NAND vs Emmc error, so I tried to find a working NAND ROM.
The ones I did find on the net also resulted in some sort of error.
I had both a BROM error and the "PMT changed for the ROM" error.
I have been using the SP flashtool 5.1628.
Any suggestions anyone?