I've tried magisk and i get "update process ended with erorr 1".
I also tried flasing SuperSu and it was sucessfull, but still not rooted.
use latest magisk zip
thgm21 said:
I've tried magisk and i get "update process ended with erorr 1".
I also tried flasing SuperSu and it was sucessfull, but still not rooted.
Click to expand...
Click to collapse
It occurs because rooting your ROM requires to mount Vendor. But the recovery you're using is unable to mount Vendor. So it produces error 1.
To solve it you need to flash another twrp recovery capable of mounting vendor.
Try twrp recovery by xdoge. It'll work.
Related
Today, i try to install cm 12.1 rom, so i do something like:
1. Unlock bootloader
2. Install Recovery TWRP v2.6.3.0
3. After install recovery, i boot into recovery and install rom CM 12.1 but i met these error:
E:Error executing updater binary in zip '/sdcard/Trick
Error flashing zip
4. Now i reboot, it say that:
No OS Installed
5. Now when i reboot , the screen stop at logo HTC
6. I try to install Google Play Edition Max,
But i face the same error
What can i do now ? Somebody helppppppppppppppp
try with another twrp, use flyhalf's twrp
itsmelutfor said:
try with another twrp, use flyhalf's twrp
Click to expand...
Click to collapse
I was, then i can install recovery twrp 2.7, it work fine,
But rom cm12.1 always failed, i install google edition, it run ok, but when it start, reboot happens
shadowsoul1986 said:
I was, then i can install recovery twrp 2.7, it work fine,
But rom cm12.1 always failed, i install google edition, it run ok, but when it start, reboot happens
Click to expand...
Click to collapse
Firstly, find your correct variant of TWRP HERE. Currently TWRP 2.8.6.0.Download and flash recovery.
Then, flash ROM.
I could really use some help here. I'm using a Mate 10 regular with the latest version of Pretoriano80's TWRP installed (https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904). I am currently on ALP-L29 8.0.0.136 and trying to install the 8.0.0.138 update. But when I tap download and install, the phone reboots to the TWRP terminal but the update fails with:
check_write_data_to_partition,write data error
update_huawei_pkg_from_ota_zip: update package from zip failed.
E:unknown command [errno]
Updater process ended with ERROR: 9
Error installing zip file '/sdcard/HwOUC/151698/update.zip
The phone is rooted with Magisk but I've tried unrooting and even factory resetting the device but still the same problem.
Any help would be greatly appreciated.
essen212 said:
I could really use some help here. I'm using a Mate 10 regular with the latest version of Pretoriano80's TWRP installed (https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904). I am currently on ALP-L29 8.0.0.136 and trying to install the 8.0.0.138 update. But when I tap download and install, the phone reboots to the TWRP terminal but the update fails with:
check_write_data_to_partition,write data error
update_huawei_pkg_from_ota_zip: update package from zip failed.
E:unknown command [errno]
Updater process ended with ERROR: 9
Error installing zip file '/sdcard/HwOUC/151698/update.zip
The phone is rooted with Magisk but I've tried unrooting and even factory resetting the device but still the same problem.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
TWRP can't install update.zip by default.
But you can use Firmware Finder, manually download b138 (update.zip, public and hw data zips for L29)
Then download HuRUpdater: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Go to /sdcard/HWFF/151698/ and place HuRUpdater here (optional: place TWRP named recovery.img here too if you want to flash it else you will get stock recovery).
Then flash HuRUpdater.zip in /sdcard/HWFF/151698/ and it will install update.
After this you have to reflash Magisk as ramdisk is now stock.
ante0 said:
TWRP can't install update.zip by default.
But you can use Firmware Finder, manually download b138 (update.zip, public and hw data zips for L29)
Then download HuRUpdater: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Go to /sdcard/HWFF/151698/ and place HuRUpdater here (optional: place TWRP named recovery.img here too if you want to flash it else you will get stock recovery).
Then flash HuRUpdater.zip in /sdcard/HWFF/151698/ and it will install update.
After this you have to reflash Magisk as ramdisk is now stock.
Click to expand...
Click to collapse
It worked, thank you so much!
Hi guys I just rooted( as a newbie) my old redmi note 4x using SuperSU. but I came to know that systemless magisk is really better option and has many amazing modules . then I tried to unroot through SuperSU app 's full unroot option . But it said ' uninstallation failed'
then went to twrp (3.2.3) ,wiped data.. then it became unrooted .afterwards tried to flash magisk v18.0 from twrp .but it failed and showed 'updater process ended with error :1'
So what should be my next procedure ??
Thanks in advance.....
Latest twrp is 3.3.1-0 and Magisk is 20.4, try this
Ray Krebs said:
Latest twrp is 3.3.1-0 and Magisk is 20.4, try this
Click to expand...
Click to collapse
Just tried those latest versions but still the same message ' updater process ended with error :1' .
Is it a miui 11 problem?
If you aks google about twrp error 1 by installing magisk, i found following solution.
Extract with 7-zip the boot.img out of the Custom.zip file and copy it also to Smartphone.
Flash with twrp this boot.img to the boot partition and than try to install magisk.
Ray Krebs said:
If you aks google about twrp error 1 by installing magisk, i found following solution.
Extract with 7-zip the boot.img out of the Custom.zip file and copy it also to Smartphone.
Flash with twrp this boot.img to the boot partition and than try to install magisk.
Click to expand...
Click to collapse
I have to download the miui.zip and then extract ??
They talk to extract the boot.img from the Custom Rom that you want to install and copy it on your internal memory or sd card.
https://m.youtube.com/watch?v=gUmqStKhxWA
Hello. I've been trying to install a custom rom on my phone (9s Global) but both TWRP and OrangeFox give me Error 1 and I can't do anything to fix the problem. My phone is running Android 11. OF gives me an obscure message but TWRP gives me a fail error when mounting some partitions.
I tried to install it again but OrangeFox didn't even give me an error code, just a simple error when installing the zip file.
Is the recovery supposed to mount the system partition? I can't select it in OrangeFox and I can't do anything to solve my problem.
I don't know what happened, but when I try to flash pixel experience 12 on this using TWRP, it says that "devices on super may not mount
until rebooting recovery", I've tried a lot of fixes but none of them worked, when I flashed orangefox it flashed and worked, but I'm getting a similar mounting error on that as well, please help, I'm desparate
If you want to install a custom rom, use the recommended procedure for that rom. The rom developer gives you a proven procedure.
PE is not intended to be installed from TWRP or OFOX.
StaryMuz said:
If you want to install a custom rom, use the recommended procedure for that rom. The rom developer gives you a proven procedure.
PE is not intended to be installed from TWRP or OFOX.
Click to expand...
Click to collapse
yeah, but i cant even flash magisk or anything.
I normally use Magisk and it goes flash from all recoveries. Only the recovery must correspond with the ROM.
"devices on super may not mount until rebooting recovery"
Click to expand...
Click to collapse
Had the same problem. Solution for me was to use MiFlashTool to go back to stock.
Then flashed Twrp again and I was able to flash custom rom.
ScarletSkies1234 said:
I don't know what happened, but when I try to flash pixel experience 12 on this using TWRP, it says that "devices on super may not mount
until rebooting recovery", I've tried a lot of fixes but none of them worked, when I flashed orangefox it flashed and worked, but I'm getting a similar mounting error on that as well, please help, I'm desparate
Click to expand...
Click to collapse
This is actually how Virtual A/B works. That's not an error.