Hello everyone, I have the Amlogic S912 CSA95 Android 7.1.2 device, I tried to install a rom of the T95Z by the sd card method, and so install TWRP and Poison Rom, it loaded the upgrade, however after rebooting it was no image on HDMI, I already tried to flash the rom stock again the USB Burning Tool, and it always has the error "uboot / get result / disk initial error" never exceeds 7%, I can not load the rom on the device, I already tried the sd card method and also can not image on HDMI, I am with the device bricked, only with the red led (off) and blue (on) from what I have been searching, my Bootloader is wrong, how can I solve this problem??? Is there any way to erase the wrong data from memory and be able to flash the Stock Rom again via SD card??? I need my CSA95 device running as before.
I managed to recover the CSA95, however I can not use it, it loads the first time, and with 5 minutes of use, the problems begin, applications presenting errors and closing alone, and the device locking and restarting direct, impossible to use, I think was defective.
Related
Hello,
I've bought a new device - Evolveo StronPhone Q4, MTK6589 based phone. The stock ROM is basically vanilla Android 4.2.1. I've successfully rooted it using Framaroot.
Then I've created scatter file using MTK Droid Tools (all partitions that were formated were ext4).
Then I've decided to create a backup before I start playing with it, so I've tried backing up flash using SP Flash Tool (using Readback), it was running fine and downloaded approx. 20%, then crashed. I've tried that once or twice more times, always failed. Now after I plug it in, windows display "This device can perform faster" and FlashTool won't detect the device. If I connect it without battery with VolDn key pressed, FlashTool detects it and I get S_DL_GET_DRAM_SETTING_FAIL.
However, the phone boots fine, just GPS/Wifi/BT is not working. (No GPS icon appers, and I get errors like BT_open: WMT turn on BT fail in dmesg). Looks like an issue with kernel/HW issue.
Any ideas what could have gone wrong and how to fix it?
In the meantime, I've asked manufacturer for a stock FW image, but I'm not sure it helps...
Update: Okay, I have no clue what just happened. However I've unrooted, reverted everything I've modified on the phone so far so I'll be able to return it to manufacturer as "deffective"... And just for the curiosity connected it to the computer and tried downloading ROM one more time. And it succeeded - I'll upload the ROM once I get access to faster internet connection. I've removed the battery (phone was stuck in Preloader mode because I cancelled ongoing RAM test.), put it back and now everything works.
So, it looks like everything is fine now, however I'd love to know what happened, if you have any clue, please let me know!
fw problem
Mrkvak said:
Hello,
I've bought a new device - Evolveo StronPhone Q4, MTK6589 based phone. The stock ROM is basically vanilla Android 4.2.1. I've successfully rooted it using Framaroot.
Then I've created scatter file using MTK Droid Tools (all partitions that were formated were ext4).
Then I've decided to create a backup before I start playing with it, so I've tried backing up flash using SP Flash Tool (using Readback), it was running fine and downloaded approx. 20%, then crashed. I've tried that once or twice more times, always failed. Now after I plug it in, windows display "This device can perform faster" and FlashTool won't detect the device. If I connect it without battery with VolDn key pressed, FlashTool detects it and I get S_DL_GET_DRAM_SETTING_FAIL.
However, the phone boots fine, just GPS/Wifi/BT is not working. (No GPS icon appers, and I get errors like BT_open: WMT turn on BT fail in dmesg). Looks like an issue with kernel/HW issue.
Any ideas what could have gone wrong and how to fix it?
In the meantime, I've asked manufacturer for a stock FW image, but I'm not sure it helps...
Update: Okay, I have no clue what just happened. However I've unrooted, reverted everything I've modified on the phone so far so I'll be able to return it to manufacturer as "deffective"... And just for the curiosity connected it to the computer and tried downloading ROM one more time. And it succeeded - I'll upload the ROM once I get access to faster internet connection. I've removed the battery (phone was stuck in Preloader mode because I cancelled ongoing RAM test.), put it back and now everything works.
So, it looks like everything is fine now, however I'd love to know what happened, if you have any clue, please let me know!
Click to expand...
Click to collapse
hello,
could you please upload somewhere original fw for Evolveo Strongphone Q4. im in bootloop now
Hi all,
can you hel me with strongphone Q4, do you know any better rom for this phone?
Maybe by PM in czech? ...
Hi all,
I tried for a few days and seek no solution, therefore I would like to ask if anyone have such situation and got a solution.
Model: Lenovo S939
It was with android 4.2.2 which is the stock rom until I successfully flash it to android 4.4.2 which is the official VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36 about two months ago.
I think I accidently deleted some apps in the phone(I was trying to clear personal contents) and now the phone cannot turn on at all. I am able to connect the phone to my PC using USB and have the driver for it. So I can use SP_Flash_Tool_v5.1524.00.000. I have stock roms S939_S129_140217 and S939_S126_140109 in scatter form.
I flash one of them using the SP tool, but when I finish downloading and reboot, it go back to android vibe UI v2.0, and all sort of system processes stopped continuously, I cannot access the phone at all.
Then I reboot and boot into recovery ( CWM 5 for S939, get from Needroom). I have quite some customs roms saved in my Sd cards which I got from needroom.com:
VIBEUI_V2.0_1501_7.5.1_DEV_S939_WC19.ZIP
VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36.zip
Material_ROM_V3.zip
Loli_Dark_S939_FASTCHIP.zip
I try to flash every one of them, all of them say successful, but when reboot, I boot back to vibe UI 2.0 and all systems processes stopped continuously. I tried to patiently click “OK” and try to access the system setting to enable to USB debugging, but no success.
Have any one got such experience and a solution of it? Spent too much time trying to figure out and appreciate any input.
Regards,
Lacer
when i try to flash roms in recovery...
additional infos, when i try to flash roms in recovery mode, there are warning about no context
and if i go into meta mode and click the option to clear emmc, it restart itself and go back to the vibe ui with non stop pop out of processes stop error.
Lacerlacer said:
Hi all,
I tried for a few days and seek no solution, therefore I would like to ask if anyone have such situation and got a solution.
Model: Lenovo S939
It was with android 4.2.2 which is the stock rom until I successfully flash it to android 4.4.2 which is the official VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36 about two months ago.
I think I accidently deleted some apps in the phone(I was trying to clear personal contents) and now the phone cannot turn on at all. I am able to connect the phone to my PC using USB and have the driver for it. So I can use SP_Flash_Tool_v5.1524.00.000. I have stock roms S939_S129_140217 and S939_S126_140109 in scatter form.
I flash one of them using the SP tool, but when I finish downloading and reboot, it go back to android vibe UI v2.0, and all sort of system processes stopped continuously, I cannot access the phone at all.
Then I reboot and boot into recovery ( CWM 5 for S939, get from Needroom). I have quite some customs roms saved in my Sd cards which I got from needroom.com:
VIBEUI_V2.0_1501_7.5.1_DEV_S939_WC19.ZIP
VIBEUI_V2.0_1507_7.9.1_ST_S939_WC36.zip
Material_ROM_V3.zip
Loli_Dark_S939_FASTCHIP.zip
I try to flash every one of them, all of them say successful, but when reboot, I boot back to vibe UI 2.0 and all systems processes stopped continuously. I tried to patiently click “OK” and try to access the system setting to enable to USB debugging, but no success.
Have any one got such experience and a solution of it? Spent too much time trying to figure out and appreciate any input.
Regards,
Lacer
Click to expand...
Click to collapse
it seems like something to do with the error 1041. I failed to test the nand flash
It seems like something to do with the error 1041. I failed to run a dedicated memory test in SP tool. Anyone have any though?
Lacerlacer said:
additional infos, when i try to flash roms in recovery mode, there are warning about no context
and if i go into meta mode and click the option to clear emmc, it restart itself and go back to the vibe ui with non stop pop out of processes stop error.
Click to expand...
Click to collapse
The phone(rooted) was working great and I decide to move to CM11 (to pair with my MOTO 360) as there was no official Kitkat upgrade.
CM had some issues but after a while the nav-keys started mis-behaving and random touches. So, I decide to go back to stock ROM. I followed the standard process and finally after using the LGNPST tool (I had used it in past to fix the "Security Error Boot loop" successfully).
Back to stock ROM v4.1.2 - things were stable for a while but the nav-key touch issue persisted. And one day suddenly apps started crashing. I restarted the phone and all was gone! With my internal memory only 128MB!
I can't hard-reset (it does nothing after selecting factory reset) and using the LG tool I get an error (at 85% - "Fail to write partition Primary GPT, 512th Sector.") Everytime I restart the phone, its factory reset (any app installed are gone!)
How can I repair my Primary partition? Or any way to get back my storage using a stock or custom ROM.
Thank you.
Even I am facing the same problem. Can anyone help
After I stilled root and xposed with TWRP for this post: https://forum.xda-developers.com/honor-8/development/twrp-t3566563 , it worked fine, but after I tried installing a different type of root, xposed framework stopped working as it should. I tried using a backup of complete stock, but when I booted the device with the restored backup, it was like only half of the ROM was restored. I was missing muliple of stock apps, and thos that was there didn't work. Not even settings.
Then I did my attempt at flashing the stock EMUI with the "dload" folder method. But every time I try it just says "Update Failed".
As I last resort I went to custom ROM's cause I need a device with basic Internet and phone supper atleast. But when I flash ANY custom ROM, it just reboots a few times and the screen stay black. It's like the device is still on, and I know this because when I plug it in my PC in this stage, windows gives out a unknown device plugged in.
I have been trying and googeling for the past two days. And I really am lost...
I apriciate any attempt to help me!
Hi There,
My Main Issue:
I have a Samsung Galaxy S6 Edge SM-G925F, with a cracked screen, at 15% battery life the display is not usable, although anything after 25% it becomes usable and brightness levels from 60%~100% the device and screen is usable.
BIG issues:
Recovery Mode [Display Dead - But Active in Recovery Mode]
Download Mode [Display Dead - But Active]
Boot Screen and logo [Nothing but one flash on cracked side] - indicates OS boot
Work a rounds:
Watched YT videos of people in recovery and basically counted my way to wiping cache and dalvic etc [which worked once]
FIRMWARE Issues:
Samsung_SM-G925F_(G925FXXU6ESA1_G925FOJV6ESB1_South_Africa_v7.0)_by_(FirmwareOS.com) - Size: 1.9GB | Works But unable to boot
SM-G925F_1_20180530094301_nsue7o1m55_fac - Size: 4.9GB | Works but when installed only 16Gb assigned feels like the wrong firmware or dual sim or possible double os with backdoor
XFV-G925FXXU5EQL2-20180111184000 - Does not work without alterations.
Odin Version Used: 3.10, 3.10.6, 3.10.7, 13.14
1. When installing Samsung_SM-G925F_(G925FXXU6ESA1_G925FOJV6ESB1_South_Africa_v7.0)_by_(FirmwareOS.com) using odin, it completes with success although its unable to boot into the startup screen. (Most likely stuck on boot logo but unable to see).
2. When installing SM-G925F_1_20180530094301_nsue7o1m55_fac using odin, it completes and is able to boot and setup the device. My main issue is that this OS is double the size weird in app apps and the OS Storage is at 16GB and not 32GB.
Work Around:
I installed SM-G925F_1_20180530094301_nsue7o1m55_fac then at bootscreen entered download mode again and installed Samsung_SM-G925F_(G925FXXU6ESA1_G925FOJV6ESB1_South_Africa_v7.0)_by_(FirmwareOS.com), That installs with success and boots it sorts out the weird apps and works smoothly, only problem is now that storage is at 16GB and not 32GB still.
I have got XFV-G925FXXU5EQL2-20180111184000 working and installable although it is not worth the effort as the OS itself is missing major .com files.
I messed around to the point where i got it to 32GB although i flashed it to get to the working non sketchy size firmware Samsung_SM-G925F_(G925FXXU6ESA1_G925FOJV6ESB1_South_Africa_v7.0)_by_(FirmwareOS.com).
My Final Points:
Started googling how to build my own android rom, turns out that route is going to including a steep learning curve and a fast data connection.
Remembered XDA back when i used android 5 years ago and i must say this is a darn cool upgrade to XDA , tried to find a firmware failed
Found Linage OS, realized i cannot install that due to no sd card and no screen visibility in recovery mode.
Is there anyone with free time and the available tools required to create a proper bootable image for the SM-G925F perhaps stock 7.1 rom, or help me piece together a working one using multiple other firmwares.
Been mixing around with the images, then simply recreating the md5 files and the final combined.md5 would be used as the trial and error img.
Mission:
Trying to get this baby back up and running so that i could actually utlise it by installing linux etc as i do not need a screen to VNC or SSH
Thanks in advance
UPDATE:
New Firmware found:
ISSUES: Able to install although displays 16GB of storage still.
I was unable to install in stand alone from download as Odin got stuck at meta-data/foto.zip
After removing the meta-data i then remade the .tar.md5 and installed it using Odin
It was a success up until i checked the storage and it was incorrect. I then went to Settings and found those weird looking settings "Apps" setting doubled .
Link : SM-G925F_XFV_G925FXXS6ETK3_G925FXFV6ESE1_G925FXXU6ESE3_G925FXXS6ETK3
EDIT:
Currently Going to give this one a try
G925FXXS6ETJ4_G925FOJV6ETJ1_PAK-Droidhelper.com.zip
Will update with results
UPDATE: Did not work.
Going to fiddle with number 2 as that one happened to pick up 32GB on one install.
Found a New Firmware:
XSG-G925FXXU6ERD3-20180515181713
Going to give this one a try.
Will post an update
UPDATE: Did not work