Mar 12th, 2019
So it has been awhile since I tinker with Gcam, and now that I have finished the modding of it and no longer have my Mix 3, I will upload the final copy of Gcam. As usual thanks to everyone from defcomg, cstark27, san1tyy, xtreme, bsg, zoran.
https://drive.google.com/open?id=1rBUkxfz2IlG_0SGaTlJ2G6mL-16Bx8LY
Changelog:
-added corrected black level for most shots. Bl corrected for 1/30 shutter so you will have slight tint on slow shutter at extreme low light conditions.
-modified xlib2 to remove tint, and noise
-new menu and icons
Bugs:
-sometimes hdr+ enhanced at 40 frames or 36 frames will not save the first shot, but shot afterwards will save. Tried to find a fix but cannot so use lower frames for most stability, ie.. 25 or so.
Feb 7th, 2019
Update: https://drive.google.com/open?id=1IKGyubiBrdqWVp_gQfmTLaA8HErtoyk7
-added lens blur mode courtesy of san1tyy to take picture of objects and animals
Recommended settings:
-Rear camera set to Pixel 3 XL
-Processing set to 2018 zslr hdr+
-set frames to 40 for min and max for best low light shot (will take some time to process), or set to 20 for both for quick shots
-hdr+ enhance and night sight set min iso compensation to 1/3 or 1/4 s for best shot, but hands have to be still as possible
-exposure compensation to +0.6
-chose Xlib for lib choice
So several have stated that shutter isn't working on global rom, and some other Mix flagship such as Mix 2/2S doesn't work so with help from san1tyy, metadata was cleaned up and should be working now
https://drive.google.com/open?id=1hu9tm0ZSMI3F645rSr2wXq3HhMRP5DUp
Feb 4th, 2019
After bunch of trials and error, lib modding here and there, finally got a working stable version with some new changes with help from Zoran, Savitar, Xtreme, and San1tyy . Lib modding for awb using different calibrations from various devices would not play nice due to either unsaturated or nuclear saturation, especially from S9 series, so I just left it stock for now. Here's the new apk: https://drive.google.com/open?id=1scOaLD8_eeZEdlaR6q1lCXzUSLtb6miB
Changes:
-added compensation exposure
-new lib (Xlib) with sharpened decreased
-frames changed to 40 instead of 45 due to exif cache size error and won't save image
-qc color awb works finally without the yellow tint, thanks big time to Savitar
-UI changes
enjoy guys and donation are welcome so I can get more devices to work on. Paypal: [email protected]
The iso slider had an issue, and wouldn't capture. Also sabre and pixel 3 awb was not included so this version is updated to include it
https://drive.google.com/open?id=11ORyhdqIjFXNlZFsdfA0NDEW8auU3aNr
So sliders had some issue of not triggering for both iso and focus. After multiple test trials, san1tyy and defcomg pulled through again and got it working! APK is also cleaned up to only include Edzman v3, savitar v2, and stock google libs. Enjoy guys.
https://drive.google.com/open?id=1Mtr1GB2aGlBme42Fv82f9Co9Nyd20PXY
https://drive.google.com/open?id=1jfKHqHjahS-K8-GJz04BjxgphyTFmvmo
Make sure you are on the latest global beta from Xiaomi, or the latest beta from xiaomi.eu for camera not to lag in viewfinder and processing HDR+. This mod is based on BSG's latest version with working telephoto lens. Thanks to the great defcomg, xtreme and san1tyy over at telegram, here are the changes:
-added 45 frames, and 50 frames. The 50 frames will cause viewfinder to flicker like crazy but it does works.
-removed ISO limit of 9600 because stock camera can go up to 19000+ iso
-long exposure added for up to 32 seconds in hdr+ enhanced and night sight
-manual focus sliders and exposure sliders
Slo motion should work, motion photo do not work because of lib issue from xiaomi. For configs, use Pixel XL for rear camera, processing use 2018 zlsr+, front camera can use Pixel 3 XL. Using Pixel XL gives correct awb vs Pixel 3 XL which gives a true to life color at night time with low lighting (ie.. 5 to 10 lux).
Night Sight Working on China Stable 10.2.1.0
Thanks
Camera works great just laggy in night sight
jvs60 said:
Camera works great just laggy in night sight
Click to expand...
Click to collapse
use xiaomi.eu rom or beta chinese
I am on the official global rom 10.0.11.0
I'm on official global ROM as well and the view finder is incredibly laggy
global rom will do this, you need to be on global beta or xiaomi.eu rom or chinese beta rom
Any news on the global stable update?
I find the Xiaomi forums a pain to navigate otherwise would check myself heh.
Hi xterminater07, Thanks for your work! Its impressive! I use this version of gcam for my LG G6 and works great but I have some doubts about the 32s long exposure. Could you tell me what file inside the gcam package can I modify to try other configurations? I decompile the apk but I cant find where the parameters are for the amount of seconds depending on the lux. Thanks!!!
PD: Sorry for my bad english
All the lags and slowness disappeared after the latest global update (received the ota and updated an hour ago), now when I tried night Sight, taking multiple shots in a row etc etc there are no lags whatsoever anymore for me!
I was just about to flash the EU rom to fix the lags but no need anymore!
lv-88 said:
All the lags and slowness disappeared after the latest global update (received the ota and updated an hour ago), now when I tried night Sight, taking multiple shots in a row etc etc there are no lags whatsoever anymore for me!
I was just about to flash the EU rom to fix the lags but no need anymore!
Click to expand...
Click to collapse
Me too! I don't know what they did but its not lsggy anymore!
---------- Post added at 06:50 PM ---------- Previous post was at 06:48 PM ----------
Does any one find that you have to tap twice on the camera button to take a pic? Very annoying
Thanks for this great port! Is it possible to implement the option that the portrait photos wont be saved in a separate folder? In the port for Pocophone it is...
Thank you again!
How do I enable the telephoto lens?
Sorry, just figured it out. Enable Aux camera in BSG settings, then double tap change camera icon (the one to change to front camera). It changes from back normal > front > back telephoto.
reasonablebasis said:
Sorry, just figured it out. Enable Aux camera in BSG settings, then double tap change camera icon (the one to change to front camera). It changes from back normal > front > back telephoto.
Click to expand...
Click to collapse
Thank you for this, i was just trying to figure this out haha.
Does portrait mode work on your Mix 3? When i select portrait it zooms-in and only makes one photo while it says 'burst images'. When i disable zoom on portrait the only thing that seems to change is the zoom, but no acutal portrait shot. Well.. it seems the same as a normal photo
reasonablebasis said:
How do I enable the telephoto lens?
Click to expand...
Click to collapse
ruubs said:
Thank you for this, i was just trying to figure this out haha.
Does portrait mode work on your Mix 3? When i select portrait it zooms-in and only makes one photo while it says 'burst images'. When i disable zoom on portrait the only thing that seems to change is the zoom, but no acutal portrait shot. Well.. it seems the same as a normal photo
Click to expand...
Click to collapse
I noticed that it does not work for small objects, but works well with people. I guess the subject has to be far enough for portrait mode to actually work.
Regarding the telephoto lens, there seems to be no noise reduction applied to it, unlike the main lens. This results in very grainy photos especially during the night. Can you add noise reduction, or an option for it for both lenses in the settings? Thanks
ruubs said:
Thank you for this, i was just trying to figure this out haha.
Does portrait mode work on your Mix 3? When i select portrait it zooms-in and only makes one photo while it says 'burst images'. When i disable zoom on portrait the only thing that seems to change is the zoom, but no acutal portrait shot. Well.. it seems the same as a normal photo
Click to expand...
Click to collapse
Works fine for me, but only for actual portrait photography. It can't recognise objects.
ruubs said:
Thank you for this, i was just trying to figure this out haha.
Does portrait mode work on your Mix 3? When i select portrait it zooms-in and only makes one photo while it says 'burst images'. When i disable zoom on portrait the only thing that seems to change is the zoom, but no acutal portrait shot. Well.. it seems the same as a normal photo
Click to expand...
Click to collapse
have you tried clicking on the resulting image, if you open it, you will see a blurred one and the non-blurred editions.
so the resulting image is like a folder that when you open, it will have the blurred edition inside it.
Ive discovered that the newest Gcam port from the Pocophone thread also works on our Mix 3! It has more options like save in camera folder when taking portrait shots and so on... Everything works, is there any downside using it?
Related
UPDATE: I haven't really followed this thread since I don't have an S10 anymore, however, just a heads up telephoto now works with the Snapdragon S10/Note 10 series and Gcam! Gcam can be downloaded in my S20 thread here: https://forum.xda-developers.com/t/gcam-working-with-s20-ultra-telephoto.4200277/
Now with Wide Angle and Telephoto Camera Support!
All credits go to Arnova8G2, CStark, Fizwiz, Xenius9, Urnyx05
Benefits:
Gcam offers less aggressive noise reduction and oversharpening. Under daylight things might not look too different but it's a lot better for low light, especially for finer details like carpets, hair, fabric texture. I've attached some comparison shots. The file names will indicate which camera was used for the pictures.
Regarding 6.1 vs 6.2 vs 7.0 vs 7.2:
6.1 could be more stable and allows you to save profiles that you can swap between (for instance if you have a setting for indoor and outdoor). However 6.2 is faster, possibly better processing algorithms. 7.0 is faster still and even better algorithms. 7.0+ also ads astrophotography option which is night sight but even better! 7.2 works on Android 10 only and should improve upon 7.0.
GCAM 6.1.0.021 Base
Download Arnova's Advanced 1.7 here: https://www.celsoazevedo.com/files/android/google-camera/dev-arnova8G2/
then download the XML config attached to this post.
Instructions for applying the XML file can be found here: https://www.celsoazevedo.com/files/android/google-camera/f/settings09/
What works:
- Aperture switching for main camera (settings > Samsung CameraAPI2 > toggle "Switch to 2.4f aperture)
- Motion photo (have to use google photos as gallery and only limited to 1080p resolution)
- Night Sight
- Portrait mode
- Wide angle camera (hold the toggle camera button to switch between wide and regular rear cameras, press to switch between rear camera and front camera)
GCAM 6.2.030 Base
Download Arnova's Advanced 2.2 here: https://forum.xda-developers.com/devdb/project/dl/?id=31714
Go to Settings > About > Enable Advanced Features
Settings > Enable AUX
Settings > HDR+ Control > Image Format > YUV_420_888
Quality HDR+ > Super High
Custom Libs > Eszdman v3 Beta
What works:
- Aperture switching for main camera (aperture icon at the bottom right)
- Motion photo
- Night Sight
- Portrait mode
- Wide angle camera (toggle button at the bottom left)
GCAM 7.0.009 Base
Download Xenius9's GCam_4.0.191101.0729build-7.0.009_x9_s9s_mod_0.43.apk here: https://drive.google.com/drive/folders/12qfHQ-oq4vrHCWFkNaP6lNHMoDB31SNy
To enable astrophotography, go to settings, developer settings and make sure nightsight.extended_tripod and nightsight.extended_iterable_burst is enabled.
What works:
- Aperture switching for main camera (aperture icon at the bottom right)
- Motion photo
- Night Sight (with Astrophotography)
- Portrait mode
GCAM 7.2.010 Base for Android 10
Download Urynx05's gcam mod here: https://forum.xda-developers.com/showpost.php?p=81499445&postcount=1197
then download the XML config here: https://www.celsoazevedo.com/files/android/p/f/2020/01/s10_snap.xml
Instructions for applying the XML file can be found here: https://www.celsoazevedo.com/files/android/google-camera/f/settings09/
What works:
- Aperture switching for main camera (aperture icon at the bottom right)
- Motion photo
- Night Sight (Astrophotography can be enabled but max shutter is only like 2 seconds, not enough for stars)
- Portrait mode
- Wide Angle Camera
More development info can be found in the original app page.
https://forum.xda-developers.com/apps/google-camera-mods/app-arnovas-google-camera-port-t3862448
Thanks for this however how do I know if the XML file you posted is the one that's actually being used
I have downloaded this but nightsight doent work but the base camera does. Some of the other features crash the app. Im using s10+ snap.
Ratzinc said:
Thanks for this however how do I know if the XML file you posted is the one that's actually being used
Click to expand...
Click to collapse
Rataba said:
I have downloaded this but nightsight doent work but the base camera does. Some of the other features crash the app. Im using s10+ snap.
Click to expand...
Click to collapse
Did you guys apply the XML file after copying it to where it needs to go? Detailed instructions here: https://www.celsoazevedo.com/files/android/google-camera/f/settings09/
Followed the instructions and it seems to be working fine so far on my S10, although I haven't done extensive testing.
How do you switch between apertures? It doesn't seem obvious to me.
Any reason this wouldn't also work on a Snapdragon S10+? Thinking about giving it a try now...
---------- Post added at 11:11 AM ---------- Previous post was at 10:42 AM ----------
Installed and verified basic functionality on my S10+. Took a couple of night sight pictures and they turned out good. Will do some more testing. Thanks for the information.
Update: I'm seeing issues when switching between different modes. For example, the picture freezes whenever I go into portrait mode. Other modes work sometimes, but display a black screen other times. The app doesn't freeze or crash, and if I switch to another mode then switch back, sometimes that resolves it.
Avohkah Tamer said:
Followed the instructions and it seems to be working fine so far on my S10, although I haven't done extensive testing.
How do you switch between apertures? It doesn't seem obvious to me.
Click to expand...
Click to collapse
It's in Settings under Samsung CameraAPI2.
mrsmithb said:
Any reason this wouldn't also work on a Snapdragon S10+? Thinking about giving it a try now...
---------- Post added at 11:11 AM ---------- Previous post was at 10:42 AM ----------
Installed and verified basic functionality on my S10+. Took a couple of night sight pictures and they turned out good. Will do some more testing. Thanks for the information.
Update: I'm seeing issues when switching between different modes. For example, the picture freezes whenever I go into portrait mode. Other modes work sometimes, but display a black screen other times. The app doesn't freeze or crash, and if I switch to another mode then switch back, sometimes that resolves it.
Click to expand...
Click to collapse
To fix portrait mode freezing, go to Settings (top section, mod settings) -> Advanced -> FIX -> Viewfinder Format. Then select YUV-420_888 (default).
Very good. The viewfinder fix seems to have worked for portrait mode, and helped with all other modes as well.
Any other settings changes you would recommend making to optimize performance?
Which photo is from the stock cam vs gcam?
I took a few pics just now outside with default camera and then with Google night sight. Google cam pics definitely a little brighter, and much clearer, with more detail than the default cam. Quite pleased.
Got it to work thank you. Had to restart my phone, now everything works.
Snapdragon?
Yes i have the s10+ with snap
mrsmithb said:
I took a few pics just now outside with default camera and then with Google night sight. Google cam pics definitely a little brighter, and much clearer, with more detail than the default cam. Quite pleased.
Click to expand...
Click to collapse
Night sight is phenomenal. To the point where I use it almost exclusively even in daylight on my Pixel 3. Can;t wait for S10 with gcam port.
How is the shutter delay using the gcam port on the S10? On LGs where I have used gcam, the ZSL would not work and that was the only downside.
When i took picture with night sight.my phone restart it sekf.
I envy you guys. I have got the exynos version and stock cam quality is ****. Miss my pixel 3.
Sent from my SM-G973F using Tapatalk
xxaarraa said:
Night sight is phenomenal. To the point where I use it almost exclusively even in daylight on my Pixel 3. Can;t wait for S10 with gcam port.
How is the shutter delay using the gcam port on the S10? On LGs where I have used gcam, the ZSL would not work and that was the only downside.
Click to expand...
Click to collapse
I will check the shutter delay today when I have time. I've only used it for night shots as of now since that was the primary advantage it has over the samsung cam software. I know as of right now, this version doesn't support the wide angle lens, which means it's necessary to keep both sets of software. HOwever, I read in another thread (here or on reddit) that there is now a gcam version that works with JUST the wide angle lens. So hopefully they can combine these and give us a fully working port in the near future.
thanks i will try soon.
On the snap my stock cam sucks also. This google cam and open camera destroy it
I got the latest gcam versions working on mix 3 so gonna share it here
Sanity:
https://f.celsoazevedo.com/file/cfiles/gcm1/GoogleCamera_6.2.030_stable_alt.apk
BSG:
https://f.celsoazevedo.com/file/cfiles/gcm1/MGC_6.2.030_RN7_V1plusplus_FINAL.apk
Will Attach Sample Images Later
The Sanity apk worked for me but BSG kept closing. Thanks very much!
Everything seems to be working without any issues - it has some cool camera modes not in the stock camera.
I will use this for the night sight because I hear it's better than MIUI's version.
But I'll keep MIUI camera for front facing pictures:
gcam front facing flash lights up screen rather than uses the torch at the front.
In gcam settings, front camera photo resolution maximum is 6.2 megapixels instead of 24MP.
gcam has digital zoom! This is good - stock doesn't have digital zoom.
Does anyone have any opinion on MIUI camera vs gcam for daytime pictures though (mix 3)? It's night time here so I can't compare yet.
Looks like gcam does not use the optical zoom (2x) like stock does. Only digital zoom available. So stock camera may be better here for far away shots.
Mumups said:
Looks like gcam does not use the optical zoom (2x) like stock does. Only digital zoom available. So stock camera may be better here for far away shots.
Click to expand...
Click to collapse
Using the telephoto lens is different on GCam 6.2 version, it was easier on previous versions. IIRC, you have to go to settings (settings > advanced > on the bottom there is a "Switch to the auxiliary back camera" switch) every time you want to use the telephoto lens. A bit annoying but there's nothing we can do about that, I'm afraid.
Hopefully.
Tested on: RR ROM (not GSI) from https://build.lolios.ml/sirius/
GCam version: Arnova's Advanced 1.5 Download
Config xml file: see attachments Alternative Download
Disclaimer
If you're not using my same setup I can't guarantee the same results, though I think this should apply, for the most part, no matter the ROM you're using. If you're using a GSI I think it should work the same as long as you have flashed the gcam fix zip (or Magisk module).
Introduction
I chose Arnova's mod because it's the most customizable out there. To get it working straight out of the box:
Install GCam
Create directory /sdcard/GCam/Configs if it doesn't exist
Move xml config file to the directory
Long press on the GCam icon and select "Take a video"
Double-tap on empty space below shutter
Choose the xml file from the menu and click restore
Step 4 is necessary because trying to lauch with the defaults options results in a crash, but not in video mode. We're using this as workaround to import the settings in order to fix the crash and configure the camera.
I'll now describe every setting that I chose to edit so that you can understand why I set it up the way it is. Most of these settings are based on personal preference so feel free to experiment for yourself.
Settings
Mod settings - Advanced - FIX - RAW10 in front
Enabled.
Fixes the camera crash on app launch.
Mod settings - Advanced - FIX - Buffer Fix
Enabled.
Fixes viewfinder lag. Doesn't fix it for Night Sight. Also, I remember this wasn't needed when using GSI + gcam fix zip so if you're using a GSI maybe try disabling this and see how it goes.
Autoexposure correction
1/10 sec.
This setting is very important. It controls the balance between noise and blurriness / time it takes to shoot a frame.
Basically, here's what this does. When you take a picture there are a few factors that influence how bright the picture will be. These factors are width of the objective, time the camera spends taking the picture (also known as shutter speed) and the sensor sensitivity (also known as ISO). Unlike regular cameras, the width of the objective is fixed (I believe) so on our phone we're limited to ISO and shutter speed. The longer the shutter speed, the more time the sensor is exposed to light, the brighter the picture. If you're not steady though, longer shutter speeds will result in blurry photos. Increasing ISO, on the other hand, will allow you to keep shutter speed low and have sharp images, but will significantly increase the amount of noise in the picture.
What this setting does is set a limit to how high the shutter speed can get before it will resort to increasing ISO if it needs to. The default settings of Off gave pretty bad results for me - picking 1/50 and 2000+ ISO where 1/10 and 300 ISO did perfectly fine - though feel free to experiment for yourself. Keep in mind the actual time to take the pic will be at most this setting times the HDR+ parameters setting. So if you have the default setting of 9 for HDR+ and 1/10 like I do it will take at most 0.9s to take a picture.
Correction NightSight
1 sec.
Same as Autoexposure Correction but for Night Sight mode. I set this to a very long time but it's totally personal preference so feel free to tweak this. As you may have guessed, I really dislike noisy pictures...
Pixel 3 AWB
Enabled.
See the GCam ports site relative FAQ.
I found it produces warmer colors. It also seems to only work if you use Pixel 3 or Pixel 3XL as models. Feel free to change.
Mod settings - Advanced - Base - Model
Pixel 3 for both cameras.
Tested other models and didn't find any difference except Pixel 3 AWB stopped working except for Pixel 3XL.
Mod settings - Advanced - Noise reduction
Everything disabled.
Trying enabling them but they didn't really seem to work so I left them off.
Mod settings - Advanced - FIX - Using Sabre
Auto.
Sabre FAQ. I left Auto because I have no clue what that's supposed to mean. Tried both On and Off and they worked but I couldn't spot a difference. It supposedly makes pictures better though, so set to On if you'd like.
Mod settings - Advanced - Libs
Stock by Google.
I just left the default because I tried the other ones and found no difference. Try them for yourself if you feel like it.
Mod settings - Advanced - Enable Auto exposure
Disabled.
This is weird one, most of the times it crashed the app right after shooting (didn't store the pics), other times it worked but I saw no difference. Don't think we're missing out on anything.
Photo - Advanced - "Motion" function
Disabled.
Enabling crashes the app, it might work with different models settings / configs (in Mod settings - Advanced - Base) but I didn't bother because I don't really care for it. If you somehow get it to work, please report back. Thanks!
Photo - Advanced - Optical Stabilization (OIS)
Disabled.
MI 8 SE doesn't have OIS. Not much to say.
Video - Advanced - Init SlowMo with
120 FPS.
Setting this to 120 FPS instead of the default 240 FPS allows to use both 1/4 and 1/8 speed for slow motion.
By the way, I believe that while most of this guide should also apply to GSIs, iirc slow-mo is broken on GSI and there's not much you can do about it. Sorry.
I hope to have cleared up the confusion about GCam, I surely was very confused when I first started looking into it and was quite overblown with all the settings.
Let me know if you know about anything that could be added to the guide.
Thank you!
I can't do the "Long press on the GCam icon and select "Take a video" in MIUI
CoizSola said:
I can't do the "Long press on the GCam icon and select "Take a video" in MIUI
Click to expand...
Click to collapse
True, it's a limitation of the default MIUI launcher. You can install a third party launcher temporarily and use that. To my knowledge there's no other way around it, unfortunately.
Thanks for this thread. There is something wrong about xml file. I am not able to download it via three different browsers. Could you please upload it anywhere else?
TacoNikky said:
Thanks for this thread. There is something wrong about xml file. I am not able to download it via three different browsers. Could you please upload it anywhere else?
Click to expand...
Click to collapse
Updated the OP, thanks for letting me know.
pixel launcher
guglicap said:
True, it's a limitation of the default MIUI launcher. You can install a third party launcher temporarily and use that. To my knowledge there's no other way around it, unfortunately.
Click to expand...
Click to collapse
you can install pixel launcher its works
OMG :victory: This is best GCam i've ever used.
Photo quality(lowest noise) and colors are really changed. Thanks for your hard work
TacoNikky said:
OMG :victory: This is best GCam i've ever used.
Photo quality(lowest noise) and colors are really changed. Thanks for your hard work
Click to expand...
Click to collapse
Glad to hear that! The reduced noise is just the result of the shutter speed setting, I'm still very doubtful about setting 1/10 as limit, sometimes I feel like it's way too long... Especially because it seems like once you've set it it becomes super aggressive in picking it instead of a more sensible combination like 300 ISO - 1/50 shutter speed.
guglicap said:
Glad to hear that! The reduced noise is just the result of the shutter speed setting, I'm still very doubtful about setting 1/10 as limit, sometimes I feel like it's way too long... Especially because it seems like once you've set it it becomes super aggressive in picking it instead of a more sensible combination like 300 ISO - 1/50 shutter speed.
Click to expand...
Click to collapse
Better quality photos are more important than waiting(shutter speed) in my opinion. Colors are sharp and contrast is higher than standart gcam. These settings give really good results. Sharp and clean photos :good:
The app crashes every time I take photos with hdr+ off. And in BSG v2e the shutter speed of hdr+ is so much faster than hdr+ enhanced which is useful if I want to take photos in crowded places
CoizSola said:
The app crashes every time I take photos with hdr+ off. And in BSG v2e the shutter speed of hdr+ is so much faster than hdr+ enhanced which is useful if I want to take photos in crowded places
Click to expand...
Click to collapse
True, thanks for the report. I'll try and see if I can find a workaround. Shutter speed gets faster if you set Autoexposure correction to off, but ISO gets a lot higher as a result and produces very noisy pics.
guglicap said:
True, thanks for the report. I'll try and see if I can find a workaround. Shutter speed gets faster if you set Autoexposure correction to off, but ISO gets a lot higher as a result and produces very noisy pics.
Click to expand...
Click to collapse
And also, I hope we can use the 20MP front camera. The 5MP limit looks pretty bad.
CoizSola said:
And also, I hope we can use the 20MP front camera. The 5MP limit looks pretty bad.
Click to expand...
Click to collapse
That looks like it's a ROM issue since even the stock camera app shoots at 5MP
Thanks friend it's working but there's a lag in night sight's viewfinder.. Can u tell me how to fix it? I've tried a lot of gcam version but nothing works.. I'm using miui 10.3.1.0
Merackball said:
Thanks friend it's working but there's a lag in night sight's viewfinder.. Can u tell me how to fix it? I've tried a lot of gcam version but nothing works.. I'm using miui 10.3.1.0
Click to expand...
Click to collapse
Yeah, as far as I know it's not fixable... it only worked after flashing the GCam fix zip but that seems to be causing issues in MIUI so I don't know.
Thx for share ur experience, but i hv issue slow capture for front camera, how fix it ?
Hi guys try bsg's gcam mi9se v0d, it's working for mi8se..
its work flawlesly on official dot-extended 3.3
need to un-check buffer fix
everything work except photobooth
thank you. i now.have.a working gcam
I installed this but nighs mode lags a lot, what can I do?
I'm currently testing a Google Camera port on the ASUS ROG Phone 3. I am using GCam_7.3.018_Urnyx05-v2.0_Wichaya_snapcam_V2.2 by Wichaya. Here are my observations so far with respect to compatibility:
id 0 = main camera 16 mp
id 1 = front camera 24 mp
id 2 = ultra wide camera 13 mp
id 3 = macro camera 5 mp
id 4 = main camera 64 mp raw
Observations:
All 4 lenses work, including the two rear auxiliary cameras (wide-angle and macro.) You have to go to Settings > Advanced > Auxiliary camera and enable them there.
64MP unbinned images can be captured, it's ID4. Aggressive denoising seems to remove a lot of detail. Play with the Luma denoise and Chroma denoise values in Settings > Advanced > Lib patcher.
HDR+ enhanced works with 64MP capture.
Max video recording is 4K60. 8K30 not available.
Slow motion crashes, so no 4K120 available.
Current issues:
No distortion correction for the wide-angle camera
Selfies are always 24MP, no pixel binning
I will get camera samples at a later date.
Thanks to Wichaya for their assistance!
GCam_7.3.018_Urnyx05-v2.1_Wichaya v2.3
Based on Urnyx05's 7.3.018 v2.1. (Thanks Urnyx05)
- Optimize apk by uncompressed apk and clean up code (Thanks Arnova8G2)
- Added set auto exposure target frame rate range for viewfinder (works on some phone)
Download : https://www.celsoazevedo.com/files/android/google-camera/f/changelog1281/
One thing that amaze me is a lot of high resolution stuff such as 64 mp, 8k video resolution and 4k slow motion are in id 4 instead of the usual id 0
The camera2 api is similar to Zenfone 6 and Rog Phone 2 but with separate ids for high resolution
Thanks Mishaal for testing :good:
How are the photos compared to the stock camera?
I would buy Asus ROG Phone 3, but the camera does not satisfy me 100%... so I'm much interested to GCAM "mod" Asus ROG Phone 3 results!
This one was captured by gcam urnyx modded for rog2 the xml configs also from rog2 , I'm using a normal lens with hdr+
Sorry I had to make another comment since my mobile data is so slow right now, same gcam same settings but this one is a night mode one.
GCam_7.3.018_Urnyx05-v2.1_Wichaya_V2.5
Now no longer use specific package name for aux cameras thanks to new code
Package name : com.GoogleCamera.Wichaya
Based on GCam 7.3.018 Urnyx05 V2.1 (Thanks Urnyx05)
Changelog
- ? Aux cameras working on most phones without root apart from some exceptions. (Bug on Rog Phone 3 crash when switch lens from 64 mp mode to front camera. Change lens to main first before use front camera) Thanks a lot to Eszdman and Arnova8G2 for the code shared to me and others.
- Added OPPO and Experimental opmode (Thanks Arnova for the value)
- Adjusted some menus in the settings
- Press lib patcher icon bring to lib patcher menu, hold awb icon bring to awb menu, hold exposure button bring to exposure compensation menu (Thanks Overwhelmer)
- Added Gamma Curve, HDR Range Control and experimental lib patcher thanks to Julian Tsependa aka Tatchan for finding the address and Arnova8G2 for the new lib patcher
- Fixed black screen aux video mode on some devices
- Added new option to choose viewfinder buttons layout between old left side or top near the drop down menu
- Added no restart when no setting changes (Thanks Arnova for suggestion)
- Adjusted viewfinder buttons size based on screen dpi (Thanks Overwhelmer for suggestion)
Download : https://www.celsoazevedo.com/files/android/google-camera/f/changelog1311/ (Thanks Celso for the host)
I think the 60fps video recording is not 60. The video recording with stock camera is much much smoother. Can anybody confirm amd is there a solution?
Hey guys. Just checking in to see how the gcam is going for this device, is it a great improvement over the stock cam?
any working gcam ports??....mine force closing whenever i launched it luckily im not a camera enthusiast but having a working gcam port is assuring though....gonna have to wait few month more i assume
Gcam works good on rog
Using Posted GCam, and its definitely better than stock, but i do get issues with focus on GCam, it hunts. I expected the cam to be better on rog3, vs rog2, buts its not. ASUS needs to invest more time on its cams. They are pretty bad.
but then again.. this is a gaming phone. and they are investing more on the gaming features
Here are some pics I've taken:
m98221 said:
Here are some pics I've taken:
Click to expand...
Click to collapse
How do you take a picture of a bird moving with 2 different cameras and the bird looks in the same exact position? Unless the picture is taken out of a book or magazine
In other more info see the other bird behind has moved, :laugh:
JEANRIVERA said:
How do you take a picture of a bird moving with 2 different cameras and the bird looks in the same exact position? Unless the picture is taken out of a book or magazine
In other more info see the other bird behind has moved, :laugh:
Click to expand...
Click to collapse
That bird is a cormorant. It stood there with its wings like that for a while. It does it to dry its wings. Or so I've read online.
Thanks for this app. GCam works faster, when I take pictures at 64 MP with Asus cam app it is pretty slow. But GCam pictures quality is lesser than Asus app.
bASKOU said:
Thanks for this app. GCam works faster, when I take pictures at 64 MP with Asus cam app it is pretty slow. But GCam pictures quality is lesser than Asus app.
Click to expand...
Click to collapse
Gcam quality is lesser? WTF? Dont use 64 mp, thats the magic in Gcam, the pixel binning. Unfortunately the cam on the rog3 is very bad, and not much will fix it.
bs3pro said:
Gcam quality is lesser? WTF? Dont use 64 mp, thats the magic in Gcam, the pixel binning. Unfortunately the cam on the rog3 is very bad, and not much will fix it.
Click to expand...
Click to collapse
The cam is not that bad. I had no bad shot with this phone, it sure is less good than the note 10 + of my wife but nothing wrong with the cam while using Asus cam app. Can't say that about GCam that is even after modding it, optimized to use with Pixel phone.
More samples
Here are some more samples from stock cam and gcam. The stock cam pics are the ones on the left and top.
Did someone tried any gcam version for the zenfone 9? The cameras of this phone are suck, over sharpness, selfie? On paper good selfie sensor but the results are poor
Oversharpening effect on Zenfone 9 is very strong. Every Zenfone 9 user should inform Asus that they aren't happy about it on Asus forums:
ZenFone 9
zentalk.asus.com
If nobody reports anything on their official channels then Asus will think people like it
Try out the latest BSG gcam mod:
BSG GCam APKs - Google Camera Port
Modified Google Camera app by BSG.
www.celsoazevedo.com
Working front, rear cameras. Haven't test everything. But so far so good. Wide angle works too. No config applied
The stock camera auto HDR pictures are way to overexposed. This is just an example I took this morning. I prefer the gcam output.
I will post about this in the Asus forum once I have more time.
Cheers
avivasaf said:
Did someone tried any gcam version for the zenfone 9? The cameras of this phone are suck, over sharpness, selfie? On paper good selfie sensor but the results are poor
Click to expand...
Click to collapse
You can try lastest Wichaya's 8.1 v1.6 Gcam:
Wichaya GCam APKs - Google Camera Port
Modified Google Camera app by Wichaya.
www.celsoazevedo.com
The GCam makes photos look way better - how ever I'm not knowledgeable enough about the configs to know how to fix. The 8.1 Wichaya version seems to work the best. Though video modes still feel sluggish in the viewfinder. A lot of delay from moving the phone.
I also can't select the main 773 sensor in the noise reduction section. It's simply not there as an option.
Oh well. It seems to work otherwise. Slow motion and 50MP RAW has been disabled for now from Wichaya.
This guy evidently got GCAM working and notes improvements over native camera app.
Has anyone how things are with android 13? The Gcam is way better, but cannot be used for all purposes, I wish Asus just fixes the heavy post-processing so I can use the native app which is great by the way.
I just joined Android 13 beta program from my Zenfone 9. No ROM yet, but will let you know when they start rolling out.
I made a config for my Wichaya 8.1 and created noise model with some other adjustment to the settings
Enabled 50MP for video and slow mo only (partially working)
Just my 2 cents for wichaya.
The photo is tricky (but ugly) and the purpose was to demonstrate that the Asus process is not on par with the Gcam for color rendering and HDR.
The reds (box, chair and dress) are much more realistic on the Gcam shot. Same for the woody wall.
And look at the sky....
mickey36736 said:
I made a config for my Wichaya 8.1 and created noise model with some other adjustment to the settings
Enabled 50MP for video and slow mo only (partially working)
Click to expand...
Click to collapse
The 50M dont work
Did anyone get a gcam with working portrait mode? For me it doesnt apply the blur effect. I have to manually end the blur in Google Photos after
mike freegan said:
Did anyone get a gcam with working portrait mode? For me it doesnt apply the blur effect. I have to manually end the blur in Google Photos after
Click to expand...
Click to collapse
Works for me.
I'm using Wichya's Gcam mod + zenfone8/9 config. You have to take the photo in "Portrait" mode.
eVen123 said:
Works for me.
I'm using Wichya's Gcam mod + zenfone8/9 config. You have to take the photo in "Portrait" mode.
Click to expand...
Click to collapse
I'm a little new to this. How do I apply that config?
mike freegan said:
I'm a little new to this. How do I apply that config?
Click to expand...
Click to collapse
GCam_8.1.101_Wichaya_V1.6.apk
Wichaya8.1-ZF8-V5.xml
In the app, you Setting -> Advanced -> XML config -> Import XML config (and you import it).
Before it will allow you to import, you also have to give the gcam the "All Files" permission.
eVen123 said:
GCam_8.1.101_Wichaya_V1.6.apk
Wichaya8.1-ZF8-V5.xml
In the app, you Setting -> Advanced -> XML config -> Import XML config (and you import it).
Before it will allow you to import, you also have to give the gcam the "All Files" permission.
Click to expand...
Click to collapse
Thank you! Where do you find the config files?
eVen123 said:
Works for me.
I'm using Wichya's Gcam mod + zenfone8/9 config. You have to take the photo in "Portrait" mode.
Click to expand...
Click to collapse
Oh I worked out the problem. It only applies portrait mode to photos of people, not to other objects. I remember this was the case with the original Google Pixel 1 that I had.
Is it the same for you?
It doesn't pick up my dog, which is a bummer.
mike freegan said:
Oh I worked out the problem. It only applies portrait mode to photos of people, not to other objects. I remember this was the case with the original Google Pixel 1 that I had.
Is it the same for you?
It doesn't pick up my dog, which is a bummer.
Click to expand...
Click to collapse
Sadly, I don't have a pet to check
It works on my front and rear camera in vertical or horizontal orientation. It only works this way in "portrait" app setting (so chosen from between Night Sight/Portrait/Camera/Video/more...).
I've provided you the link to the config file too. It's an .XML file in the previous comment.
eVen123 said:
Sadly, I don't have a pet to check
It works on my front and rear camera in vertical or horizontal orientation. It only works this way in "portrait" app setting (so chosen from between Night Sight/Portrait/Camera/Video/more...).
I've provided you the link to the config file too. It's an .XML file in the previous comment.
Click to expand...
Click to collapse
Yes I got it thank you very much. I have a Pixel 6 too, and the portrait mode on that (and camera in general) is much better so I may just stick with that for now.
@eVen123 the config you link to is the one for Zenfone 8. Am I correct there is no Zenfone 9 config yet?
Is the gimbal stabilisation then used with Gcam?