Hopefully.
Tested on: RR ROM (not GSI) from https://build.lolios.ml/sirius/
GCam version: Arnova's Advanced 1.5 Download
Config xml file: see attachments Alternative Download
Disclaimer
If you're not using my same setup I can't guarantee the same results, though I think this should apply, for the most part, no matter the ROM you're using. If you're using a GSI I think it should work the same as long as you have flashed the gcam fix zip (or Magisk module).
Introduction
I chose Arnova's mod because it's the most customizable out there. To get it working straight out of the box:
Install GCam
Create directory /sdcard/GCam/Configs if it doesn't exist
Move xml config file to the directory
Long press on the GCam icon and select "Take a video"
Double-tap on empty space below shutter
Choose the xml file from the menu and click restore
Step 4 is necessary because trying to lauch with the defaults options results in a crash, but not in video mode. We're using this as workaround to import the settings in order to fix the crash and configure the camera.
I'll now describe every setting that I chose to edit so that you can understand why I set it up the way it is. Most of these settings are based on personal preference so feel free to experiment for yourself.
Settings
Mod settings - Advanced - FIX - RAW10 in front
Enabled.
Fixes the camera crash on app launch.
Mod settings - Advanced - FIX - Buffer Fix
Enabled.
Fixes viewfinder lag. Doesn't fix it for Night Sight. Also, I remember this wasn't needed when using GSI + gcam fix zip so if you're using a GSI maybe try disabling this and see how it goes.
Autoexposure correction
1/10 sec.
This setting is very important. It controls the balance between noise and blurriness / time it takes to shoot a frame.
Basically, here's what this does. When you take a picture there are a few factors that influence how bright the picture will be. These factors are width of the objective, time the camera spends taking the picture (also known as shutter speed) and the sensor sensitivity (also known as ISO). Unlike regular cameras, the width of the objective is fixed (I believe) so on our phone we're limited to ISO and shutter speed. The longer the shutter speed, the more time the sensor is exposed to light, the brighter the picture. If you're not steady though, longer shutter speeds will result in blurry photos. Increasing ISO, on the other hand, will allow you to keep shutter speed low and have sharp images, but will significantly increase the amount of noise in the picture.
What this setting does is set a limit to how high the shutter speed can get before it will resort to increasing ISO if it needs to. The default settings of Off gave pretty bad results for me - picking 1/50 and 2000+ ISO where 1/10 and 300 ISO did perfectly fine - though feel free to experiment for yourself. Keep in mind the actual time to take the pic will be at most this setting times the HDR+ parameters setting. So if you have the default setting of 9 for HDR+ and 1/10 like I do it will take at most 0.9s to take a picture.
Correction NightSight
1 sec.
Same as Autoexposure Correction but for Night Sight mode. I set this to a very long time but it's totally personal preference so feel free to tweak this. As you may have guessed, I really dislike noisy pictures...
Pixel 3 AWB
Enabled.
See the GCam ports site relative FAQ.
I found it produces warmer colors. It also seems to only work if you use Pixel 3 or Pixel 3XL as models. Feel free to change.
Mod settings - Advanced - Base - Model
Pixel 3 for both cameras.
Tested other models and didn't find any difference except Pixel 3 AWB stopped working except for Pixel 3XL.
Mod settings - Advanced - Noise reduction
Everything disabled.
Trying enabling them but they didn't really seem to work so I left them off.
Mod settings - Advanced - FIX - Using Sabre
Auto.
Sabre FAQ. I left Auto because I have no clue what that's supposed to mean. Tried both On and Off and they worked but I couldn't spot a difference. It supposedly makes pictures better though, so set to On if you'd like.
Mod settings - Advanced - Libs
Stock by Google.
I just left the default because I tried the other ones and found no difference. Try them for yourself if you feel like it.
Mod settings - Advanced - Enable Auto exposure
Disabled.
This is weird one, most of the times it crashed the app right after shooting (didn't store the pics), other times it worked but I saw no difference. Don't think we're missing out on anything.
Photo - Advanced - "Motion" function
Disabled.
Enabling crashes the app, it might work with different models settings / configs (in Mod settings - Advanced - Base) but I didn't bother because I don't really care for it. If you somehow get it to work, please report back. Thanks!
Photo - Advanced - Optical Stabilization (OIS)
Disabled.
MI 8 SE doesn't have OIS. Not much to say.
Video - Advanced - Init SlowMo with
120 FPS.
Setting this to 120 FPS instead of the default 240 FPS allows to use both 1/4 and 1/8 speed for slow motion.
By the way, I believe that while most of this guide should also apply to GSIs, iirc slow-mo is broken on GSI and there's not much you can do about it. Sorry.
I hope to have cleared up the confusion about GCam, I surely was very confused when I first started looking into it and was quite overblown with all the settings.
Let me know if you know about anything that could be added to the guide.
Thank you!
I can't do the "Long press on the GCam icon and select "Take a video" in MIUI
CoizSola said:
I can't do the "Long press on the GCam icon and select "Take a video" in MIUI
Click to expand...
Click to collapse
True, it's a limitation of the default MIUI launcher. You can install a third party launcher temporarily and use that. To my knowledge there's no other way around it, unfortunately.
Thanks for this thread. There is something wrong about xml file. I am not able to download it via three different browsers. Could you please upload it anywhere else?
TacoNikky said:
Thanks for this thread. There is something wrong about xml file. I am not able to download it via three different browsers. Could you please upload it anywhere else?
Click to expand...
Click to collapse
Updated the OP, thanks for letting me know.
pixel launcher
guglicap said:
True, it's a limitation of the default MIUI launcher. You can install a third party launcher temporarily and use that. To my knowledge there's no other way around it, unfortunately.
Click to expand...
Click to collapse
you can install pixel launcher its works
OMG :victory: This is best GCam i've ever used.
Photo quality(lowest noise) and colors are really changed. Thanks for your hard work
TacoNikky said:
OMG :victory: This is best GCam i've ever used.
Photo quality(lowest noise) and colors are really changed. Thanks for your hard work
Click to expand...
Click to collapse
Glad to hear that! The reduced noise is just the result of the shutter speed setting, I'm still very doubtful about setting 1/10 as limit, sometimes I feel like it's way too long... Especially because it seems like once you've set it it becomes super aggressive in picking it instead of a more sensible combination like 300 ISO - 1/50 shutter speed.
guglicap said:
Glad to hear that! The reduced noise is just the result of the shutter speed setting, I'm still very doubtful about setting 1/10 as limit, sometimes I feel like it's way too long... Especially because it seems like once you've set it it becomes super aggressive in picking it instead of a more sensible combination like 300 ISO - 1/50 shutter speed.
Click to expand...
Click to collapse
Better quality photos are more important than waiting(shutter speed) in my opinion. Colors are sharp and contrast is higher than standart gcam. These settings give really good results. Sharp and clean photos :good:
The app crashes every time I take photos with hdr+ off. And in BSG v2e the shutter speed of hdr+ is so much faster than hdr+ enhanced which is useful if I want to take photos in crowded places
CoizSola said:
The app crashes every time I take photos with hdr+ off. And in BSG v2e the shutter speed of hdr+ is so much faster than hdr+ enhanced which is useful if I want to take photos in crowded places
Click to expand...
Click to collapse
True, thanks for the report. I'll try and see if I can find a workaround. Shutter speed gets faster if you set Autoexposure correction to off, but ISO gets a lot higher as a result and produces very noisy pics.
guglicap said:
True, thanks for the report. I'll try and see if I can find a workaround. Shutter speed gets faster if you set Autoexposure correction to off, but ISO gets a lot higher as a result and produces very noisy pics.
Click to expand...
Click to collapse
And also, I hope we can use the 20MP front camera. The 5MP limit looks pretty bad.
CoizSola said:
And also, I hope we can use the 20MP front camera. The 5MP limit looks pretty bad.
Click to expand...
Click to collapse
That looks like it's a ROM issue since even the stock camera app shoots at 5MP
Thanks friend it's working but there's a lag in night sight's viewfinder.. Can u tell me how to fix it? I've tried a lot of gcam version but nothing works.. I'm using miui 10.3.1.0
Merackball said:
Thanks friend it's working but there's a lag in night sight's viewfinder.. Can u tell me how to fix it? I've tried a lot of gcam version but nothing works.. I'm using miui 10.3.1.0
Click to expand...
Click to collapse
Yeah, as far as I know it's not fixable... it only worked after flashing the GCam fix zip but that seems to be causing issues in MIUI so I don't know.
Thx for share ur experience, but i hv issue slow capture for front camera, how fix it ?
Hi guys try bsg's gcam mi9se v0d, it's working for mi8se..
its work flawlesly on official dot-extended 3.3
need to un-check buffer fix
everything work except photobooth
thank you. i now.have.a working gcam
I installed this but nighs mode lags a lot, what can I do?
Related
CameraNextMod
[For Cm13 Or CM Based Roms][Didnt Try on Miui]​
Hi Guys ,
I decided to share this because I have seen many people want to use the Color OS camera because of its low light performance.
As we all know, we aren't much happy with the Stock Camera. No doubt its stable, but we all expect for more. So here i am presenting CameraNextMod. It is developed by @abhi08638 and now its officially maintained by *PRATHAMESH*. Enjoy the sweetness of Camera Next with extra features.
What I need to flash this??
ANS: ROOTED Redmi Note 3 WITH A CUSTOM RECOVERY INSTALLED.
HOW CAN I FLASH THE ZIP?
JUST REBOOT TO YOUR RECOVERY AND FLASH THE ZIP. NO NEED TO CLEAR ANYTHING.
It gives super Clear images. It also has some other features. .
Please NOTE: Please don't try to directly install as APK.
Changelog:
1) The Focus Ring's Radius is reduced now. So it looks more pleasant to focus.
2) Fixed Storage Issues. (Some users faced it).
3) Added Touch AF/AEC Feature.
4) Added HDR+.
5) Added Auto Exposure Bracketing.
6) Added Option to disable beeping countdown sound.
Coming to Video Sections:
1) I am also trying to add Camera like denoise, saturation and all those **** to Video Section as well.
2) Accordingly, Added White Balance.
3) Added Power Shutter.
4) Fixed Video Duration issues and 24 hours video issue.
5) Now you will be able to record High Speed/Slow Motion.
6) Still Time Lapse is present even if above feature is present.
HTML:
Instructions for Flashing:
1) Download the "APPROPRIATE" CNM zip file according to the icon you love.
2) Reboot to Recovery.
3) Flash the Zip file.
4) Reboot and Have fun.
What works:
EVERYTHING.
What doesn't:
You tell.
Download Link
Special Thanks To *PRATHAMESH*
first, will try and tell
Nice to see this here! Downloading it right now.
This is for Qualcomm or MTK?
hows the camera quality?
Flashed it on kenzo miui 7.3.6 but didn't find any new camera app.
crashing when enable power button shutter and then FC all the time until delete app data
JAlvarezFlores said:
This is for Qualcomm or MTK?
Click to expand...
Click to collapse
cheeze.keyk said:
hows the camera quality?
Click to expand...
Click to collapse
naveen6252 said:
Flashed it on kenzo miui 7.3.6 but didn't find any new camera app.
Click to expand...
Click to collapse
i2k13 said:
crashing when enable power button shutter and then FC all the time until delete app data
Click to expand...
Click to collapse
1) This is for Qualcomm but you can flash it on MTK too no problem with that
2)camera quality.. u can check that for urself
3) already mentioned in the thread "it may not work in miui"
Give this a try on Miui :-
Download link for v22
Download link for v10
AutoFix click sound fix
actually im on CM13 not miui
i2k13 said:
actually im on CM13 not miui
Click to expand...
Click to collapse
Use another version
provided with the link above
cameranextmod v10 + v22 Force closes... cm13
I just flashed the v7 of this camera and as for now it seems to be a much better camera apk than the snapdragon apk.
I like how many features it has, especially the EIS.
The only bug I've found is that if I enable the "Power button as a shutter" then I have FC all the time (have to wipe it's data then).
Zooming isn't good with this camera as objects become way-to pixelated when zoomed in. Tried to do this same thing with cyanogenmod's default camera and the object was much more clearer and less pix-elated. Plus the use power button as shutter button makes the app crash all the time.
Edit - While focus works nice in both front and back camera, it doesn't show the focus ring in front camera.
gagan7 said:
Edit - While focus works nice in both front and back camera, it doesn't show the focus ring in front camera.
Click to expand...
Click to collapse
Well, there's no focus mechanism in the camera, so what kind of focus are you expecting? The face detection?
---------------
I just did some low light tests.
Tbh, there's no difference in the noise amount. Both pictures look ****ty + the pictures from this camera are all white, I mean like there's almost no color in the pictures. The stock camera wins in the color reproduction in those conditions easily.
Sent from Note 3, Xiaomi Redmi Note 3.
mr.loverlover said:
Well, there's no focus mechanism in the camera, so what kind of focus are you expecting? The face detection?
---------------
I just did some low light tests.
Tbh, there's no difference in the noise amount. Both pictures look ****ty + the pictures from this camera are all white, I mean like there's almost no color in the pictures. The stock camera wins in the color reproduction in those conditions easily.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
Just tap on the screen, then the focus starts.
mr.loverlover said:
Well, there's no focus mechanism in the camera, so what kind of focus are you expecting? The face detection?
---------------
I just did some low light tests.
Tbh, there's no difference in the noise amount. Both pictures look ****ty + the pictures from this camera are all white, I mean like there's almost no color in the pictures. The stock camera wins in the color reproduction in those conditions easily.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
Im taking about touch to focus. It doesn't have touch to focus when using front camera, whereas cyanogenmod's default camera has. don't know about miui default camera.
It takes bright pictures in low light, but It's just too white in normal condition!
Plus,stock camera has better details. Slightly better.
One more thing, there is no 120fps slowmotion for HD resolution. and I don't know if 60fps FHD works or not.
Worse than Snap Camera included in latest CM13 build (balika). The chroma noise reduction is worst...
v22 works on miui. will be glad if you can upload latest updates here
Well this is like dream come true. For video shooting, this is the best camera app for redmi note 3 atleast. It has features like video stablisation, h.265 encoding and the best of all, it is able to save the video to sd card. (I previously tried an apk of camera next from apkmirror and it was not able to dave on sd card) . And for still shotss also, it has denoise feature, which I missed back then in camera next. Thank you so much. Now there is no need to go back to miui any more. You made my day.
Mar 12th, 2019
So it has been awhile since I tinker with Gcam, and now that I have finished the modding of it and no longer have my Mix 3, I will upload the final copy of Gcam. As usual thanks to everyone from defcomg, cstark27, san1tyy, xtreme, bsg, zoran.
https://drive.google.com/open?id=1rBUkxfz2IlG_0SGaTlJ2G6mL-16Bx8LY
Changelog:
-added corrected black level for most shots. Bl corrected for 1/30 shutter so you will have slight tint on slow shutter at extreme low light conditions.
-modified xlib2 to remove tint, and noise
-new menu and icons
Bugs:
-sometimes hdr+ enhanced at 40 frames or 36 frames will not save the first shot, but shot afterwards will save. Tried to find a fix but cannot so use lower frames for most stability, ie.. 25 or so.
Feb 7th, 2019
Update: https://drive.google.com/open?id=1IKGyubiBrdqWVp_gQfmTLaA8HErtoyk7
-added lens blur mode courtesy of san1tyy to take picture of objects and animals
Recommended settings:
-Rear camera set to Pixel 3 XL
-Processing set to 2018 zslr hdr+
-set frames to 40 for min and max for best low light shot (will take some time to process), or set to 20 for both for quick shots
-hdr+ enhance and night sight set min iso compensation to 1/3 or 1/4 s for best shot, but hands have to be still as possible
-exposure compensation to +0.6
-chose Xlib for lib choice
So several have stated that shutter isn't working on global rom, and some other Mix flagship such as Mix 2/2S doesn't work so with help from san1tyy, metadata was cleaned up and should be working now
https://drive.google.com/open?id=1hu9tm0ZSMI3F645rSr2wXq3HhMRP5DUp
Feb 4th, 2019
After bunch of trials and error, lib modding here and there, finally got a working stable version with some new changes with help from Zoran, Savitar, Xtreme, and San1tyy . Lib modding for awb using different calibrations from various devices would not play nice due to either unsaturated or nuclear saturation, especially from S9 series, so I just left it stock for now. Here's the new apk: https://drive.google.com/open?id=1scOaLD8_eeZEdlaR6q1lCXzUSLtb6miB
Changes:
-added compensation exposure
-new lib (Xlib) with sharpened decreased
-frames changed to 40 instead of 45 due to exif cache size error and won't save image
-qc color awb works finally without the yellow tint, thanks big time to Savitar
-UI changes
enjoy guys and donation are welcome so I can get more devices to work on. Paypal: [email protected]
The iso slider had an issue, and wouldn't capture. Also sabre and pixel 3 awb was not included so this version is updated to include it
https://drive.google.com/open?id=11ORyhdqIjFXNlZFsdfA0NDEW8auU3aNr
So sliders had some issue of not triggering for both iso and focus. After multiple test trials, san1tyy and defcomg pulled through again and got it working! APK is also cleaned up to only include Edzman v3, savitar v2, and stock google libs. Enjoy guys.
https://drive.google.com/open?id=1Mtr1GB2aGlBme42Fv82f9Co9Nyd20PXY
https://drive.google.com/open?id=1jfKHqHjahS-K8-GJz04BjxgphyTFmvmo
Make sure you are on the latest global beta from Xiaomi, or the latest beta from xiaomi.eu for camera not to lag in viewfinder and processing HDR+. This mod is based on BSG's latest version with working telephoto lens. Thanks to the great defcomg, xtreme and san1tyy over at telegram, here are the changes:
-added 45 frames, and 50 frames. The 50 frames will cause viewfinder to flicker like crazy but it does works.
-removed ISO limit of 9600 because stock camera can go up to 19000+ iso
-long exposure added for up to 32 seconds in hdr+ enhanced and night sight
-manual focus sliders and exposure sliders
Slo motion should work, motion photo do not work because of lib issue from xiaomi. For configs, use Pixel XL for rear camera, processing use 2018 zlsr+, front camera can use Pixel 3 XL. Using Pixel XL gives correct awb vs Pixel 3 XL which gives a true to life color at night time with low lighting (ie.. 5 to 10 lux).
Night Sight Working on China Stable 10.2.1.0
Thanks
Camera works great just laggy in night sight
jvs60 said:
Camera works great just laggy in night sight
Click to expand...
Click to collapse
use xiaomi.eu rom or beta chinese
I am on the official global rom 10.0.11.0
I'm on official global ROM as well and the view finder is incredibly laggy
global rom will do this, you need to be on global beta or xiaomi.eu rom or chinese beta rom
Any news on the global stable update?
I find the Xiaomi forums a pain to navigate otherwise would check myself heh.
Hi xterminater07, Thanks for your work! Its impressive! I use this version of gcam for my LG G6 and works great but I have some doubts about the 32s long exposure. Could you tell me what file inside the gcam package can I modify to try other configurations? I decompile the apk but I cant find where the parameters are for the amount of seconds depending on the lux. Thanks!!!
PD: Sorry for my bad english
All the lags and slowness disappeared after the latest global update (received the ota and updated an hour ago), now when I tried night Sight, taking multiple shots in a row etc etc there are no lags whatsoever anymore for me!
I was just about to flash the EU rom to fix the lags but no need anymore!
lv-88 said:
All the lags and slowness disappeared after the latest global update (received the ota and updated an hour ago), now when I tried night Sight, taking multiple shots in a row etc etc there are no lags whatsoever anymore for me!
I was just about to flash the EU rom to fix the lags but no need anymore!
Click to expand...
Click to collapse
Me too! I don't know what they did but its not lsggy anymore!
---------- Post added at 06:50 PM ---------- Previous post was at 06:48 PM ----------
Does any one find that you have to tap twice on the camera button to take a pic? Very annoying
Thanks for this great port! Is it possible to implement the option that the portrait photos wont be saved in a separate folder? In the port for Pocophone it is...
Thank you again!
How do I enable the telephoto lens?
Sorry, just figured it out. Enable Aux camera in BSG settings, then double tap change camera icon (the one to change to front camera). It changes from back normal > front > back telephoto.
reasonablebasis said:
Sorry, just figured it out. Enable Aux camera in BSG settings, then double tap change camera icon (the one to change to front camera). It changes from back normal > front > back telephoto.
Click to expand...
Click to collapse
Thank you for this, i was just trying to figure this out haha.
Does portrait mode work on your Mix 3? When i select portrait it zooms-in and only makes one photo while it says 'burst images'. When i disable zoom on portrait the only thing that seems to change is the zoom, but no acutal portrait shot. Well.. it seems the same as a normal photo
reasonablebasis said:
How do I enable the telephoto lens?
Click to expand...
Click to collapse
ruubs said:
Thank you for this, i was just trying to figure this out haha.
Does portrait mode work on your Mix 3? When i select portrait it zooms-in and only makes one photo while it says 'burst images'. When i disable zoom on portrait the only thing that seems to change is the zoom, but no acutal portrait shot. Well.. it seems the same as a normal photo
Click to expand...
Click to collapse
I noticed that it does not work for small objects, but works well with people. I guess the subject has to be far enough for portrait mode to actually work.
Regarding the telephoto lens, there seems to be no noise reduction applied to it, unlike the main lens. This results in very grainy photos especially during the night. Can you add noise reduction, or an option for it for both lenses in the settings? Thanks
ruubs said:
Thank you for this, i was just trying to figure this out haha.
Does portrait mode work on your Mix 3? When i select portrait it zooms-in and only makes one photo while it says 'burst images'. When i disable zoom on portrait the only thing that seems to change is the zoom, but no acutal portrait shot. Well.. it seems the same as a normal photo
Click to expand...
Click to collapse
Works fine for me, but only for actual portrait photography. It can't recognise objects.
ruubs said:
Thank you for this, i was just trying to figure this out haha.
Does portrait mode work on your Mix 3? When i select portrait it zooms-in and only makes one photo while it says 'burst images'. When i disable zoom on portrait the only thing that seems to change is the zoom, but no acutal portrait shot. Well.. it seems the same as a normal photo
Click to expand...
Click to collapse
have you tried clicking on the resulting image, if you open it, you will see a blurred one and the non-blurred editions.
so the resulting image is like a folder that when you open, it will have the blurred edition inside it.
Ive discovered that the newest Gcam port from the Pocophone thread also works on our Mix 3! It has more options like save in camera folder when taking portrait shots and so on... Everything works, is there any downside using it?
UPDATE: I haven't really followed this thread since I don't have an S10 anymore, however, just a heads up telephoto now works with the Snapdragon S10/Note 10 series and Gcam! Gcam can be downloaded in my S20 thread here: https://forum.xda-developers.com/t/gcam-working-with-s20-ultra-telephoto.4200277/
Now with Wide Angle and Telephoto Camera Support!
All credits go to Arnova8G2, CStark, Fizwiz, Xenius9, Urnyx05
Benefits:
Gcam offers less aggressive noise reduction and oversharpening. Under daylight things might not look too different but it's a lot better for low light, especially for finer details like carpets, hair, fabric texture. I've attached some comparison shots. The file names will indicate which camera was used for the pictures.
Regarding 6.1 vs 6.2 vs 7.0 vs 7.2:
6.1 could be more stable and allows you to save profiles that you can swap between (for instance if you have a setting for indoor and outdoor). However 6.2 is faster, possibly better processing algorithms. 7.0 is faster still and even better algorithms. 7.0+ also ads astrophotography option which is night sight but even better! 7.2 works on Android 10 only and should improve upon 7.0.
GCAM 6.1.0.021 Base
Download Arnova's Advanced 1.7 here: https://www.celsoazevedo.com/files/android/google-camera/dev-arnova8G2/
then download the XML config attached to this post.
Instructions for applying the XML file can be found here: https://www.celsoazevedo.com/files/android/google-camera/f/settings09/
What works:
- Aperture switching for main camera (settings > Samsung CameraAPI2 > toggle "Switch to 2.4f aperture)
- Motion photo (have to use google photos as gallery and only limited to 1080p resolution)
- Night Sight
- Portrait mode
- Wide angle camera (hold the toggle camera button to switch between wide and regular rear cameras, press to switch between rear camera and front camera)
GCAM 6.2.030 Base
Download Arnova's Advanced 2.2 here: https://forum.xda-developers.com/devdb/project/dl/?id=31714
Go to Settings > About > Enable Advanced Features
Settings > Enable AUX
Settings > HDR+ Control > Image Format > YUV_420_888
Quality HDR+ > Super High
Custom Libs > Eszdman v3 Beta
What works:
- Aperture switching for main camera (aperture icon at the bottom right)
- Motion photo
- Night Sight
- Portrait mode
- Wide angle camera (toggle button at the bottom left)
GCAM 7.0.009 Base
Download Xenius9's GCam_4.0.191101.0729build-7.0.009_x9_s9s_mod_0.43.apk here: https://drive.google.com/drive/folders/12qfHQ-oq4vrHCWFkNaP6lNHMoDB31SNy
To enable astrophotography, go to settings, developer settings and make sure nightsight.extended_tripod and nightsight.extended_iterable_burst is enabled.
What works:
- Aperture switching for main camera (aperture icon at the bottom right)
- Motion photo
- Night Sight (with Astrophotography)
- Portrait mode
GCAM 7.2.010 Base for Android 10
Download Urynx05's gcam mod here: https://forum.xda-developers.com/showpost.php?p=81499445&postcount=1197
then download the XML config here: https://www.celsoazevedo.com/files/android/p/f/2020/01/s10_snap.xml
Instructions for applying the XML file can be found here: https://www.celsoazevedo.com/files/android/google-camera/f/settings09/
What works:
- Aperture switching for main camera (aperture icon at the bottom right)
- Motion photo
- Night Sight (Astrophotography can be enabled but max shutter is only like 2 seconds, not enough for stars)
- Portrait mode
- Wide Angle Camera
More development info can be found in the original app page.
https://forum.xda-developers.com/apps/google-camera-mods/app-arnovas-google-camera-port-t3862448
Thanks for this however how do I know if the XML file you posted is the one that's actually being used
I have downloaded this but nightsight doent work but the base camera does. Some of the other features crash the app. Im using s10+ snap.
Ratzinc said:
Thanks for this however how do I know if the XML file you posted is the one that's actually being used
Click to expand...
Click to collapse
Rataba said:
I have downloaded this but nightsight doent work but the base camera does. Some of the other features crash the app. Im using s10+ snap.
Click to expand...
Click to collapse
Did you guys apply the XML file after copying it to where it needs to go? Detailed instructions here: https://www.celsoazevedo.com/files/android/google-camera/f/settings09/
Followed the instructions and it seems to be working fine so far on my S10, although I haven't done extensive testing.
How do you switch between apertures? It doesn't seem obvious to me.
Any reason this wouldn't also work on a Snapdragon S10+? Thinking about giving it a try now...
---------- Post added at 11:11 AM ---------- Previous post was at 10:42 AM ----------
Installed and verified basic functionality on my S10+. Took a couple of night sight pictures and they turned out good. Will do some more testing. Thanks for the information.
Update: I'm seeing issues when switching between different modes. For example, the picture freezes whenever I go into portrait mode. Other modes work sometimes, but display a black screen other times. The app doesn't freeze or crash, and if I switch to another mode then switch back, sometimes that resolves it.
Avohkah Tamer said:
Followed the instructions and it seems to be working fine so far on my S10, although I haven't done extensive testing.
How do you switch between apertures? It doesn't seem obvious to me.
Click to expand...
Click to collapse
It's in Settings under Samsung CameraAPI2.
mrsmithb said:
Any reason this wouldn't also work on a Snapdragon S10+? Thinking about giving it a try now...
---------- Post added at 11:11 AM ---------- Previous post was at 10:42 AM ----------
Installed and verified basic functionality on my S10+. Took a couple of night sight pictures and they turned out good. Will do some more testing. Thanks for the information.
Update: I'm seeing issues when switching between different modes. For example, the picture freezes whenever I go into portrait mode. Other modes work sometimes, but display a black screen other times. The app doesn't freeze or crash, and if I switch to another mode then switch back, sometimes that resolves it.
Click to expand...
Click to collapse
To fix portrait mode freezing, go to Settings (top section, mod settings) -> Advanced -> FIX -> Viewfinder Format. Then select YUV-420_888 (default).
Very good. The viewfinder fix seems to have worked for portrait mode, and helped with all other modes as well.
Any other settings changes you would recommend making to optimize performance?
Which photo is from the stock cam vs gcam?
I took a few pics just now outside with default camera and then with Google night sight. Google cam pics definitely a little brighter, and much clearer, with more detail than the default cam. Quite pleased.
Got it to work thank you. Had to restart my phone, now everything works.
Snapdragon?
Yes i have the s10+ with snap
mrsmithb said:
I took a few pics just now outside with default camera and then with Google night sight. Google cam pics definitely a little brighter, and much clearer, with more detail than the default cam. Quite pleased.
Click to expand...
Click to collapse
Night sight is phenomenal. To the point where I use it almost exclusively even in daylight on my Pixel 3. Can;t wait for S10 with gcam port.
How is the shutter delay using the gcam port on the S10? On LGs where I have used gcam, the ZSL would not work and that was the only downside.
When i took picture with night sight.my phone restart it sekf.
I envy you guys. I have got the exynos version and stock cam quality is ****. Miss my pixel 3.
Sent from my SM-G973F using Tapatalk
xxaarraa said:
Night sight is phenomenal. To the point where I use it almost exclusively even in daylight on my Pixel 3. Can;t wait for S10 with gcam port.
How is the shutter delay using the gcam port on the S10? On LGs where I have used gcam, the ZSL would not work and that was the only downside.
Click to expand...
Click to collapse
I will check the shutter delay today when I have time. I've only used it for night shots as of now since that was the primary advantage it has over the samsung cam software. I know as of right now, this version doesn't support the wide angle lens, which means it's necessary to keep both sets of software. HOwever, I read in another thread (here or on reddit) that there is now a gcam version that works with JUST the wide angle lens. So hopefully they can combine these and give us a fully working port in the near future.
thanks i will try soon.
On the snap my stock cam sucks also. This google cam and open camera destroy it
running everything with top quality
Tested On Global ROM Working Perfectly
https://www.mediafire.com/file/wlm7b...evel3.apk/file
https://www.mediafire.com/file/hi25p52q9j65gne/HyperCam_S_v1.2-jairo_rossi_API2-Full.apk/file.
Some details about this cam?
Download link ultra slow tho.
This version v.1.2 is not listed here yet https://www.celsoazevedo.com/files/android/google-camera/dev-jairo_rossi/
not work in my note10 china rom
TF1920 said:
This version v.1.2 is not listed here yet https://www.celsoazevedo.com/files/android/google-camera/dev-jairo_rossi/
Click to expand...
Click to collapse
Playstory to download:
Doesn't work for me also. Xiaomi eu stable.
stavrakas2007 said:
Doesn't work for me also. Xiaomi eu stable.
Click to expand...
Click to collapse
try the other version are 2 I don't remember which one I installed
This is the correct version.
https://www.mediafire.com/file/wlm7b78gjfi08fv/HyperCam_S_v1.2-rZ-End_API2-Level3.apk/file
Lusorocaba said:
This is the correct version.
https://www.mediafire.com/file/wlm7b78gjfi08fv/HyperCam_S_v1.2-rZ-End_API2-Level3.apk/file
Click to expand...
Click to collapse
dont work too
XLM
https://drive.google.com/file/d/14EPDGhA01pk8d9_E5Sb-Sm2eBgt99iBD/view?usp=drivesdk
Sylar82 said:
dont work too
Click to expand...
Click to collapse
https://drive.google.com/file/d/14N6TQIBawRnvZmmIQhgLULtE2b97zV8z/view?usp=drivesdk
Lusorocaba said:
https://drive.google.com/file/d/14N6TQIBawRnvZmmIQhgLULtE2b97zV8z/view?usp=drivesdk
Click to expand...
Click to collapse
i think its not work because i have a china Rom MIUI 11.0.5
Sylar82 said:
i think its not work because i have a china Rom MIUI 11.0.5
Click to expand...
Click to collapse
Dont work with xiaomi.eu stable too
djisma86 said:
Dont work with xiaomi.eu stable too
Click to expand...
Click to collapse
Very strange try to move the region to Brazil.
Lusorocaba said:
Very strange try to move the region to Brazil.
Click to expand...
Click to collapse
With xiaomi.eu there note option to change region
Lol, the app is rubbish - it only goes to 12mp !!
The linked app contain a trojan.
https://www.celsoazevedo.com/files/android/google-camera/f/changelog929/
Go into the settings, and turn on HDR + Enhanced, it is into the first row of settings, one needs to click on the arrow on the main screen of the GCAM APP to enter the settings, you turn on HDR + control & HDR enhanced into the first screen of the settings/disable motion (that part of the UI) you must make sure HDR + Enhanched is enabled, triple check in the main settings into the viewfinder.
Set HDR frames to 30/45.
Go to lib patcher, turn it on, go into back camera, set it to chroma denoise = 1.0, luma denoise 0.5
Go back, take a night mode picture, be stunned. Hint, the main camera works perfect, its a bit slow into processing times, but the picture will be MILES better, if you don't want to wait so much, turn off HDR + Enhanced, and let the HDR frames at default.
Always tap to focus before taking a picture, and pay attention if the object is IN FOCUS before you take the picture.
P.S. Close all other apps from background before using this app, it is resource heavy, and do not take more shots until the first one is completely processed, you can follow the processing progress if you open the picture in the viewfinder, you need to wait around 10 seconds to be able to do so, it is slow, but the results are stunning. If waiting is not an option, turn off HDR + enhanced, and leave HDR + settings to default, by doing so you will lose some image quality, but you will be able to take shots of moving subjects without any blurring. The degradation in quality is quite noticeable in low light/darkness.
With this settings, the MI Note 10, D E S T R O Y all high end photos currently available, it toys with them, it crashes them. I have tested it vs S10 both Snapdagon and Exynos, vs iP11, vs P30 pro and so on. The difference is brutal.
dazed1 said:
https://www.celsoazevedo.com/files/android/google-camera/f/changelog929/
Go into the settings, and turn on HDR + Enhanced, it is into the first row of settings, one needs to click on the arrow on the main screen of the GCAM APP to enter the settings, you turn on HDR + control & HDR enhanced into the first screen of the settings/disable motion (that part of the UI) you must make sure HDR + Enhanched is enabled, triple check in the main settings into the viewfinder.
Set HDR frames to 30/45.
Go to lib patcher, turn it on, go into back camera, set it to chroma denoise = 1.0, luma denoise 0.5
Go back, take a night mode picture, be stunned. Hint, the main camera works perfect, its a bit slow into processing times, but the picture will be MILES better, if you don't want to wait so much, turn off HDR + Enhanced, and let the HDR frames at default.
Always tap to focus before taking a picture, and pay attention if the object is IN FOCUS before you take the picture.
P.S. Close all other apps from background before using this app, it is resource heavy, and do not take more shots until the first one is completely processed, you can follow the processing progress if you open the picture in the viewfinder, you need to wait around 10 seconds to be able to do so, it is slow, but the results are stunning. If waiting is not an option, turn off HDR + enhanced, and leave HDR + settings to default, by doing so you will lose some image quality, but you will be able to take shots of moving subjects without any blurring. The degradation in quality is quite noticeable in low light/darkness.
With this settings, the MI Note 10, D E S T R O Y all high end photos currently available, it toys with them, it crashes them. I have tested it vs S10 both Snapdagon and Exynos, vs iP11, vs P30 pro and so on. The difference is brutal.
Click to expand...
Click to collapse
Holy ****, you nailed it! Thanks a lot!
The quality is really insane.
I can't manage to try right now but is astrophotography working with this version?
atrufinibr said:
Holy ****, you nailed it! Thanks a lot!
The quality is really insane.
I can't manage to try right now but is astrophotography working with this version?
Click to expand...
Click to collapse
What's the image resolution with these settings through GCam?
I'm totally speechless, today i swapped my S20 + for a OP8P, and TBH the camera is better but they where close.
I spent quite a bit of time, and as an avid GCAM user i tried MANY GCAM ports, all where pretty much crap, or not really better than stock, but, BUT! THAN, i found Parrot043 mod. I installed made my usual tweaks, and what i have saw is literally INSANE, this camera mod, literally destroy everything i have ever tried, and believe me i tried hundreds of them in my life.
1. If you have a previous GCAM, open the camera, hold and press on the icon on the homescreen, press app info, clear cache, and data.
2. Uninstall the app, reboot the phone. Than install Parrot 043 link > https://gofile.io/d/BpCWFx - also alternative host - https://easyupload.io/k6t42a
3. Go into the settings of the GCAM, turn on HDR enhanced, into advanced section, into HDR frames, and set 35, enable sabre, just under the HDR enhanced frames option.
4. Restart the camera app, go into darkness, take a photo with your camera app, and than take a photo with the GCAM mod, BE AMAZED.
P.S. Do not touch anything else, maybe turn on H265 for videos, and 4K for the back camera, increase video bitrate to 50mbps + and that's it.
P.P.S. ALWAYS make sure you have HDR enhanced on! it makes taking moving objects harder/blurry, but for low light its EPIC.
And here is camera comparasion of stock, night mode, and GCAM
Stock for scale,
https://i.ibb.co/cQf0BXC/IMG-20200602-040720.jpg
Stock night mode,
https://i.ibb.co/x7xwfN3/IMG-20200602-040433.jpg
GCAM ( personally tweaked)
https://i.ibb.co/2nPycDV/IMG-20200602-040511.jpg
It keeps crashing for me. Is there something I'm missing?
Truant_Luce said:
It keeps crashing for me. Is there something I'm missing?
Click to expand...
Click to collapse
1. What phone are you using?
2. Did you follow the steps suggested?
3. Do you have GCAM folder, with some configs installed?
4. Try with sabre off.
dazed1 said:
1. What phone are you using?
2. Did you follow the steps suggested?
3. Do you have GCAM folder, with some configs installed?
4. Try with sabre off.
Click to expand...
Click to collapse
OnePlus 8 Pro IN2025 10.5.8 xXx rom currently.
Had gcam installed from xXx, force stopped, cleared data, uninstalled with reflashing rom to remove as system app, then rebooted. Installed the other. Tried clearing data, rebooting again, made the one you recommended a system priv app, but it keeps crashing the moment I open it. I can't even open settings, because it crashes on open.
I have tried modifying the permissions, tried a previous version, still crashes on start. At the time, no other gcam folder.
Truant_Luce said:
OnePlus 8 Pro IN2025 10.5.8 xXx rom currently.
Had gcam installed from xXx, force stopped, cleared data, uninstalled with reflashing rom to remove as system app, then rebooted. Installed the other. Tried clearing data, rebooting again, made the one you recommended a system priv app, but it keeps crashing the moment I open it. I can't even open settings, because it crashes on open.
I have tried modifying the permissions, tried a previous version, still crashes on start. At the time, no other gcam folder.
Click to expand...
Click to collapse
Its the sabre i think, you need to somehow turn it off, sometimes older GCAM ports mix with new and bugs happen, its either that, or its the sabre. In order to fix this, IF IT IS THE SABRE, you will need to wipe cache data from recovery or even FORMAT the phone, look at the photos, the upgrade is ENORMOUS, but it depends of how much you need it, i would suggest for someone with the same version as your model/firmware, test the mod to see if its the sabre or not, i had this issue on my Mi Note 10, all GCAM ports looked the same, no improvements, i tried everything only the format make the settings change post installation.
EDIT, it might be even the rom! i just saw you are on custom, sorry buddy.
Always keen to give GCAM a go (not sure why i have such a soft spot for it lol)...
Anyways, thanks for sharing this. Attached are a few samples of me jumping into a store room with the door slightly opened (it's pretty dim inside).
Truant_Luce said:
OnePlus 8 Pro IN2025 10.5.8 xXx rom currently.
Had gcam installed from xXx, force stopped, cleared data, uninstalled with reflashing rom to remove as system app, then rebooted. Installed the other. Tried clearing data, rebooting again, made the one you recommended a system priv app, but it keeps crashing the moment I open it. I can't even open settings, because it crashes on open.
I have tried modifying the permissions, tried a previous version, still crashes on start. At the time, no other gcam folder.
Click to expand...
Click to collapse
I can confirm it's related to the xXx rom. Uninstalled completely and the camera installed and worked fine, but when you reinstall the camera breaks.
names said:
I can confirm it's related to the xXx rom. Uninstalled completely and the camera installed and worked fine, but when you reinstall the camera breaks.
Click to expand...
Click to collapse
Interesting. I wonder what is causing it to break?
Truant_Luce said:
Interesting. I wonder what is causing it to break?
Click to expand...
Click to collapse
I'm curious myself. After confirming, I installed other modded camera apk's and they work correctly.
This thread has me very interested.. @xXx - any chance you could glance at this at some point and see if it warrants inclusion in an xXx magisk rom future update? No pressure, just a thought. Some of the picture samples do indeed appear impressive! Thank you!!
Thanks for sharing this, will look deeper into it (presently on Urnyx GCam port).... Just as an info:
This GCam and many more ports are on Celsozavedos excellent Gcam Port hub !
happiboi said:
Always keen to give GCAM a go (not sure why i have such a soft spot for it lol)...
Anyways, thanks for sharing this. Attached are a few samples of me jumping into a store room with the door slightly opened (it's pretty dim inside).
Click to expand...
Click to collapse
The difference is much more apparent when there is less light, but even here the GCAM is superior. Can you post full res photos please? thanks.
s3axel said:
Thanks for sharing this, will look deeper into it (presently on Urnyx GCam port).... Just as an info:
This GCam and many more ports are on Celsozavedos excellent Gcam Port hub !
Click to expand...
Click to collapse
Urnyx is also great and stable, but sadly it lacks exposure in low light, (darker photos) and the noise reduction can kill details. Parrot can see where eyes cannot, very good.
OP camera is better in low light than this, and you can't use any of the other cameras, so until they solve that problem for the OP 8 pro I'll be sticking to the stock camera.
You lose more functionality than you gain in picture quality.
xgerryx said:
OP camera is better in low light than this, and you can't use any of the other cameras, so until they solve that problem for the OP 8 pro I'll be sticking to the stock camera.
You lose more functionality than you gain in picture quality.
Click to expand...
Click to collapse
Figured out the same. Low light is way to sharp and dark.
xgerryx said:
OP camera is better in low light than this, and you can't use any of the other cameras, so until they solve that problem for the OP 8 pro I'll be sticking to the stock camera.
You lose more functionality than you gain in picture quality.
Click to expand...
Click to collapse
saphirrot said:
Figured out the same. Low light is way to sharp and dark.
Click to expand...
Click to collapse
Well on european in2023 op8pro the low light picture quality on this gcam is 10 times better then op stock cam for sure!
And yes you lose ability of other cameras.
But for the moment this gcam is my friend in making low light pictures ?????
Thanks for sharing
dazed1 said:
I'm totally speechless, today i swapped my S20 + for a OP8P, and TBH the camera is better but they where close.
I spent quite a bit of time, and as an avid GCAM user i tried MANY GCAM ports, all where pretty much crap, or not really better than stock, but, BUT! THAN, i found Parrot043 mod. I installed made my usual tweaks, and what i have saw is literally INSANE, this camera mod, literally destroy everything i have ever tried, and believe me i tried hundreds of them in my life.
1. If you have a previous GCAM, open the camera, hold and press on the icon on the homescreen, press app info, clear cache, and data.
2. Uninstall the app, reboot the phone. Than install Parrot 043 link > https://gofile.io/d/BpCWFx - also alternative host - https://easyupload.io/k6t42a
3. Go into the settings of the GCAM, turn on HDR enhanced, into advanced section, into HDR frames, and set 35, enable sabre, just under the HDR enhanced frames option.
4. Restart the camera app, go into darkness, take a photo with your camera app, and than take a photo with the GCAM mod, BE AMAZED.
P.S. Do not touch anything else, maybe turn on H265 for videos, and 4K for the back camera, increase video bitrate to 50mbps + and that's it.
P.P.S. ALWAYS make sure you have HDR enhanced on! it makes taking moving objects harder/blurry, but for low light its EPIC.
And here is camera comparasion of stock, night mode, and GCAM
Stock for scale,
https://i.ibb.co/cQf0BXC/IMG-20200602-040720.jpg
Stock night mode,
https://i.ibb.co/x7xwfN3/IMG-20200602-040433.jpg
GCAM ( personally tweaked)
https://i.ibb.co/2nPycDV/IMG-20200602-040511.jpg
Click to expand...
Click to collapse
Hello. But this is good only for the night photo or is good in every situation? What is sabre option? We dont need to choose an xml file? Thanks and i like this tipe of treadh
mhhh i actually tried different google gcams but until now - and since the last update - the stock cam is the best one for me, just in case with a lot of ( direct sun)light (google gcam often blows the sky just into white) and also in dark environments the stock cam is better than the gcam. But i think, gcams and stock cam could be better with updates over time, the software for the sensor has a much higher optimization potential.
Flash-User said:
mhhh i actually tried different google gcams but until now - and since the last update - the stock cam is the best one for me, just in case with a lot of ( direct sun)light (google gcam often blows the sky just into white) and also in dark environments the stock cam is better than the gcam. But i think, gcams and stock cam could be better with updates over time, the software for the sensor has a much higher optimization potential.
Click to expand...
Click to collapse
This GCAM is different. Havent tested it alot in daylight, but it should win even in daylight. No the stock camera is not even close to being better or equal to GCAM, you can see in the picture, or test by yourself.
vuoshino said:
Hello. But this is good only for the night photo or is good in every situation? What is sabre option? We dont need to choose an xml file? Thanks and i like this tipe of treadh
Click to expand...
Click to collapse
No need for XML.
Sabre is a better HDR merge metod, it should offers better details especially in low light. Should be in every situation, test it, you got nothing to lose.
xgerryx said:
OP camera is better in low light than this, and you can't use any of the other cameras, so until they solve that problem for the OP 8 pro I'll be sticking to the stock camera.
You lose more functionality than you gain in picture quality.
Click to expand...
Click to collapse
What do you mean better than this, are you claiming that i did something wrong with the stock pictures?
And this camera mod is mostly for low light/night mode, you don't need to use it solo and not having the option to use other cameras, you can use both, you use GCAM for low light, and other cameras as needed.
Try it with the settings suggested, and you will forget that the main camera exist in low light.
s3axel said:
Thanks for sharing this, will look deeper into it (presently on Urnyx GCam port).... Just as an info:
This GCam and many more ports are on Celsozavedos excellent Gcam Port hub !
Click to expand...
Click to collapse
This camera destroys Urnyx in low light, its like 2 gen ahead. I tested it last night, took like 3 photos, and deleted Urnyx instantly, its not even close.
dazed1 said:
This GCAM is different. Havent tested it alot in daylight, but it should win even in daylight. No the stock camera is not even close to being better or equal to GCAM, you can see in the picture, or test by yourself.
No need for XML.
Sabre is a better HDR merge metod, it should offers better details especially in low light. Should be in every situation, test it, you got nothing to lose.
What do you mean better than this, are you claiming that i did something wrong with the stock pictures?
And this camera mod is mostly for low light/night mode, you don't need to use it solo and not having the option to use other cameras, you can use both, you use GCAM for low light, and other cameras as needed.
Try it with the settings suggested, and you will forget that the main camera exist in low light.
This camera destroys Urnyx in low light, its like 2 gen ahead. I tested it last night, took like 3 photos, and deleted Urnyx instantly, its not even close.
Click to expand...
Click to collapse
Why Do you hype this camera when a lot of people tell something different? I tried the mod already and as I said, the Stock cam is better (for me) also in lowlight. I tested it in a very dark room. Also for daylight shots Stock is a way better, just in the view of sharphness.
So, your hyped gcam mod isn't the mother of all cam apps...
Update: I tested again in another Environment and again, Stock is a lot better. Not sure what's wrong with your Stock cam. Are you running the latest Version? ??Seems there is anything wrong on your side. I for myself can't share your opinion.