I have several problems with my Razr MAXX which I'm sure are related.
First one day I erased the CID of the phone without having made a previous backup, therefore I lost him irremediably. This by itself is not supposed biggest problem that I must to boot the phone in BPHW Diag & Boot AP mode.
To correct this I install Safestrap and then I install CM11 in another partition. In this way the phone worked perfectly.
First one day I erase the CID of the phone without having made a previous backup , therefore I lost him irretrievably . This in itself is not supposed biggest problem that I must to boot the phone in BPHW Diag & Boot AP mode.
To correct this I have installed Safestrap and then I Install CM11 in another partition . In this way the phone worked perfectly .
Suddenly one day phone was turned off and not turned on again , then I had to re- flash a stock ROM and then rooted it again to install Safestrap.
Here is when my problems really start.
I boot the phone in FlashBoot mode and install the stock ROM without problem.
Then I boot the ROM (in BPHW Diag & Boot AP mode) and when I am gping to connect the phone to PC by USB to root , but the PC does not detect that the phone is connected .
Another symptom I see is that the phone is not charging the battery despite being connected to the PC. Then I connect the phone to the wall charger and I notice phone don´t charge neither.
Because this, I´m not able to root the phone. The all rooting methods I know implies USB conection with PC.
Before continuing I want to clarify that I have already made all the more obvious tries:
I tried on 3 different pc. In which I did not have any problems before.
I tried with 3 different USB cables, which I used before with no problem.
I've tried different chargers.
I tried 5 different stock rom I had previously always worked well, among them that of Rogers.
And of course I always did the relevant wipes.
Retaking the thread, I have to say that Another issue that I have with the phone is that it does not work the 3g data line. This only occurs whit the stock ROM, because when I use CM11 rom then 3g is working. And this closes the circle of problems that I have:
Resuming, I can´t use 3g because I can´t install CM11, and I can´t install CM11 because I can´t install Safestrap because I can´t root the phone because Pc don´t detect it when I connect the phone with USB...
The only way I have to charge the phone is booting in normal mode.
Remeber that if I don´t boot phone in BPHW Diag & Boot AP mode then it don´t works.
When I boot in normal mode first Motorola logo appears and then the screen goes completely black, but if I look closely I notice that if the phone is on.
When the phone is in this state I can connect it to the mains and then the battery is charging. I know this because if I leave it for several hours and when I turn the phone battery is at 100% capacity.
Another interesting thing is that when the phone is in this state, I connect it to PC and then it is recognized, but this does not allow me rooting the phone because Android not is on.
This invite me to thing that it isn´t a hardware mistake.
If I do the necesary actions to boot Android, then Pc don´t detect again.
It should be mentioned that when I connect the phone via USB, the PC actually detects something, but then it tries to install some drivers that I don´t not know, but finally fails.
The mentioned drivers are this:
DIAG INTERFACE
MODEM INTERFACE
MUX INTERFACE
NMEA INTERFACE
TCMD INTERFACE
I hope someone can help me understand what happens.
I've already tried everything, and I have asked many people, but so far no one has been able to help me.
I think I have not forgotten to mention anything.
Please excuse my bad English.
I hope I have explained in an understandable way, but it's hard to explain it in my native language. Explain this in English is a challenge for me.
Best regards.
Have you tried re-installing the MOTO drivers.?
DROID RAZR with Tapatalk 4
neo.ank said:
Have you tried re-installing the MOTO drivers.?
DROID RAZR with Tapatalk 4
Click to expand...
Click to collapse
Yes. I have tried installing, uninstalling, reinstalling,... on different Pc´s and different operating systems...
hello i have a problem after the recieving of the hpone the device had 2 storage partitions but i wanted it to be one to i hcanged thr rom on my device thats when the problem starts the device does not boot up but when i plug it into me pc the pc shows that a mtk usb port device has been connected but when i charge the phone the led does not light up now i tryed to flash a different firmware but with no success also i tryed both firmware for vesrion b and normal result was the same
does anyone have any idea or someone have the same problem
please help i really need my phone back
the_ziom said:
hello i have a problem after the recieving of the hpone the device had 2 storage partitions but i wanted it to be one to i hcanged thr rom on my device thats when the problem starts the device does not boot up but when i plug it into me pc the pc shows that a mtk usb port device has been connected but when i charge the phone the led does not light up now i tryed to flash a different firmware but with no success also i tryed both firmware for vesrion b and normal result was the same
does anyone have any idea or someone have the same problem
please help i really need my phone back
Click to expand...
Click to collapse
anyone?
seriously there is no one who could help me
Hi there,
I reached to the point i'm writing message in this forum cause I honestly tried everything.
Iv'e got a Lenovo s960 which I bought on eBay, recently he decided to make a software update to Android 4.4.2.
So what is the problem?
Iv'e got the phone with custom rom for int'l use (English and with google services), the phone updated to a chinese version without google services, and a bit of english.
Iv'e reached this conclusion based on the internet.
So why can I just root the phone and install another rom?
This is a really strange problem,
I found few information online about this but mostly in ended up without solution, so folks we got a challenge.
When i'm connecting the phone on USB, it's charging but not recognized, the computer "sees nothing", the phone just charging, like it was connected to AC adapter .
Iv'e tried a few computers, a few cables, and tried on Mac OS X and Windows. I noticed that there is a known problem between Win 8.1 and media tek chips, but ever after manual install no change.
The problem is in the phone, the usb option just disappeared, the is no "usb setting" anywhere,
I also tried to enable USB debugging but yet no solution.
Shortly I need to install other rom and to do this I need something to recognize my phone.
And now I have to be honest, I'm taking care of this case for a very close friend, it's huge favor for her, if it was mine I was just buying a new one.
Any help will be blessed,
Thank you
Yarin
Jumping I'm really out of clues
Hi everyone,
Had this problem for a while now, my Samsung S6 Edge performed an overnight update to Android 7.0 and ever since the USB port does not work for data transfers. Charging works fine. Also Samsung GEAR VR doesn't work.
I had the port replaced twice, no change. I tried three different windows based PCs different cables everything reinstalled the driver, even tried a Mac computer, and still not working
OTG devices also don't work.
I think its a corrupt android partition maybe but the problem is I can't flash another android ROM onto it because ODIN doesn't see the phone either (lol)
Is there any way of getting android flashed on it another way? I would be happy to try a custom ROM if I could figure out how to flash it
Also the phone isn't rooted unfortunately
Many thanks Paul
paulds3uk said:
Hi everyone,
Had this problem for a while now, my Samsung S6 Edge performed an overnight update to Android 7.0 and ever since the USB port does not work for data transfers. Charging works fine. Also Samsung GEAR VR doesn't work.
I had the port replaced twice, no change. I tried three different windows based PCs different cables everything reinstalled the driver, even tried a Mac computer, and still not working
OTG devices also don't work.
I think its a corrupt android partition maybe but the problem is I can't flash another android ROM onto it because ODIN doesn't see the phone either (lol)
Is there any way of getting android flashed on it another way? I would be happy to try a custom ROM if I could figure out how to flash it
Also the phone isn't rooted unfortunately
Many thanks Paul
Click to expand...
Click to collapse
Go to developer options and then change USB configuration. Try that see if it helps.
I'm at the same boat pls if you solve this problem tell me how
Hello,
I am currently in a dead end with my Poco F1, and would like to check with you before throwing it away.
I was using my Poco in version 12.0.3.0 with TWRP installed and root with Magisk. Due to the last days errors of apps that shut down when opened, I decided to reinstall the system using TWRP, but I made a mistake and installed version 12.0.2.0.
I don't know what installing this version did, but now the mobile isn't starting MIUI anymore, it's starting by default TWRP. Furthermore, something has been changed in the TWRP version installed that touchsreen it's not responding, so I can´t use.
The problem is worse since, for a long time the transfer of files to a PC via USB cable isn't working on my Poco, so Windows is not able to detect the mobile in fastboot mode either. I tryied reinstalling drivres in many ways, and still not working. The poco charges perfectly, so I don't think the problem is the USB conector, maybe is a motherboard related issue, so changing the connector I don't belive will solve the problem
Recap:
- I can't start MIUI (the version has been corrupted).
- I can't use TWRP (it has been corrupted and the touch screen does not work).
- I can't install from fastboot (Windows isn`t detecting the Poco with the cable connected).
- I don't think changing USB connector solve de USB data transfer problem.
Any ideas or should I throw away the smartphone?
For me it's a real pitty, because I don't like the new Poco F3 or others phones on the market, most of them don't have 3.5mm jack or microsd card slot, and are bigger, heavier and more expensive than the Poco F1.
Thanks to everyone.
slumpp said:
Hello,
I am currently in a dead end with my Poco F1, and would like to check with you before throwing it away.
I was using my Poco in version 12.0.3.0 with TWRP installed and root with Magisk. Due to the last days errors of apps that shut down when opened, I decided to reinstall the system using TWRP, but I made a mistake and installed version 12.0.2.0.
I don't know what installing this version did, but now the mobile isn't starting MIUI anymore, it's starting by default TWRP. Furthermore, something has been changed in the TWRP version installed that touchsreen it's not responding, so I can´t use.
The problem is worse since, for a long time the transfer of files to a PC via USB cable isn't working on my Poco, so Windows is not able to detect the mobile in fastboot mode either. I tryied reinstalling drivres in many ways, and still not working. The poco charges perfectly, so I don't think the problem is the USB conector, maybe is a motherboard related issue, so changing the connector I don't belive will solve the problem
Recap:
- I can't start MIUI (the version has been corrupted).
- I can't use TWRP (it has been corrupted and the touch screen does not work).
- I can't install from fastboot (Windows isn`t detecting the Poco with the cable connected).
- I don't think changing USB connector solve de USB data transfer problem.
Any ideas or should I throw away the smartphone?
For me it's a real pitty, because I don't like the new Poco F3 or others phones on the market, most of them don't have 3.5mm jack or microsd card slot, and are bigger, heavier and more expensive than the Poco F1.
Thanks to everyone.
Click to expand...
Click to collapse
Hello,
The issue with error of apps was probably due Webview which Google pushed an update and fixed it. For more infos read here.
Now, to the current problem...how did u flashed previous version? Clean installed or Dirty installed?
What Desktop system do you use? AMD or Intel? Your PC can detect the device while you are on TWRP? Do you have twrp.img on ur device so you can reflash it via TWRP?
Check my POCO F1 Ultimate Collection & Guides
Retrial said:
Hello,
The issue with error of apps was probably due Webview which Google pushed an update and fixed it. For more infos read here.
Now, to the current problem...how did u flashed previous version? Clean installed or Dirty installed?
What Desktop system do you use? AMD or Intel? Your PC can detect the device while you are on TWRP? Do you have twrp.img on ur device so you can reflash it via TWRP?
Check my POCO F1 Ultimate Collection & Guides
Click to expand...
Click to collapse
Thanks for your answer.
I noticed that the issue with the apps is due to webview after breaking my phone, next time I'll think things twice before flashing anything.
I did a dirty installation, I thought I was installing same version (12.0.3.0), but I was flashing 12.0.2.0 on top of 12.0.3.0 without cleaning.
I tried both desktop systems: my laptop with an Intel CPU, and a PC with AMD Ryzen 9 3900X. I also tried 5 diferent USB-C cables that are working perfectly with others Android devices. When I look for new devices in the device manager of windows I can't tell any diference on listed devices with or without connecting the Poco. As I said, maybe I have some hardware issue in the phone, because file transfer was not working for many months.
I can't install anything via TWRP because touchscreen don`t respond to mi fingers... I remerber that this happend to me years ago when I installed a wrong TWRP version, but don't know if that is the problem.
slumpp said:
Thanks for your answer.
I noticed that the issue with the apps is due to webview after breaking my phone, next time I'll think things twice before flashing anything.
I did a dirty installation, I thought I was installing same version (12.0.3.0), but I was flashing 12.0.2.0 on top of 12.0.3.0 without cleaning.
I tried both desktop systems: my laptop with an Intel CPU, and a PC with AMD Ryzen 9 3900X. I also tried 5 diferent USB-C cables that are working perfectly with others Android devices. When I look for new devices in the device manager of windows I can't tell any diference on listed devices with or without connecting the Poco. As I said, maybe I have some hardware issue in the phone, because file transfer was not working for many months.
I can't install anything via TWRP because touchscreen don`t respond to mi fingers... I remerber that this happend to me years ago when I installed a wrong TWRP version, but don't know if that is the problem.
Click to expand...
Click to collapse
Are you able to to connect your device while u are on TWRP? Your PC recognize it?
Retrial said:
Are you able to to connect your device while u are on TWRP? Your PC recognize it?
Click to expand...
Click to collapse
I tried to connect the device with TWRP opened, and in fastboot mode, PC don't recognize in any case.
slumpp said:
I tried to connect the device with TWRP opened, and in fastboot mode, PC don't recognize in any case.
Click to expand...
Click to collapse
Well, somehow you need to manage to flash MIUI again via TWRP or Mi Flash Tool.
Perhaps if you redownload latest twrp.img and latest official miui 12.0.3.0 and transfer them to USB OTG or external SD Card and then put ur OTG or external SD Card to your phone and flash it from TWRP. Since you was able to wipe system as u said before you will be able to flash twrp.img into "Recovery" make Clean Install (according my guide) and flash MIUI.
I'll try if connecting something via OTG make the phone responds, but the main problem with TWRP is that appears to be corrupted or something. I cann't use it because touchscreen don't responds to me, and nothing happens either if I try to use it with volume+ and volume- buttons, I see TWRP but I can`t interact with it.
Thanks again for your patience.
Retrial said:
Well, somehow you need to manage to flash MIUI again via TWRP or Mi Flash Tool.
Perhaps if you redownload latest twrp.img and latest official miui 12.0.3.0 and transfer them to USB OTG or external SD Card and then put ur OTG or external SD Card to your phone and flash it from TWRP. Since you was able to wipe system as u said before you will be able to flash twrp.img into "Recovery" make Clean Install (according my guide) and flash MIUI.
Click to expand...
Click to collapse
I tried using OTG cable in TWRP and nothing hapens, TWRP don't respond.
Seems that I'm in a dead end, I ordered an USB PCB spare part to try if is posible to repair the USB data transfer connection replacing it, becuase looks like is the only way I have of flashing a new clean rom.
slumpp said:
I tried using OTG cable in TWRP and nothing hapens, TWRP don't respond.
Seems that I'm in a dead end, I ordered an USB PCB spare part to try if is posible to repair the USB data transfer connection replacing it, becuase looks like is the only way I have of flashing a new clean rom.
Click to expand...
Click to collapse
If you have AMD system try the AMD Fix in my guide. Also try this guide to install drivers.
Finally I could solve the problem.
I bought a new part of the USB port PCB from aliexpress, I ordered one that claims to be original for around 15€, not the 2€ ones.
I replaced it and the data transfer is working again, so I could install the ROM via fastboot from my PC.
I don't beleive that the PCB I replaced is original, but works like it is, phone charges properly and seems that didn't loose signal.
Thanks to everyone.