Screen on notifications and lower ambient brightness - Wear OS Software and Hacking General

Hi guys
I tried searching everywhere for two apps and can't find anything. I think it would be really simple but since there is no app to do this I find it strange, or maybe people don't need this...
The first one is a way to turn the screen on when I receive a notification on my watch (when ambient mode is off). I have a ticwatch E and find it really annoying to not have an option for this. Does anyone have any solution?
The other is brightness control when in ambient mode. I would like to lower the brightness of the watch when it is in ambient mode. I know that there was an app to do this (swapp true brightness or something like this) but it no longer works. Does anyone know one that works?

I found it is annoying too, I own a Ticwatch S and I want to turn off the Ambient light too but it can't pop up notification on screen after turning it off , also I wanted to turn down the brightness of the Ambient light because it make burn in on my screen after 4 month didn't change watch face

Related

x10 screen brightens and dims randomly

for a while now my screen on the x10 goes brighter and darker while browsing , not by a lot but its noticable and kind of annoying . Im curious if anyone else has this on their phone , i got nothing installed to control brightness its just stock 2.1 os. And its not because of battery since it does it when plugged in.
It's cos of the auto brightness adjustment function. =D
If you need to access it/ turn it off you have to do it through the 'Power Control' Widget
Thanx for the replies ill check out the power control widget. Im just wondering if the random change from dim to bright waste more battery ?
xperia_x10 said:
Thanx for the replies ill check out the power control widget. Im just wondering if the random change from dim to bright waste more battery ?
Click to expand...
Click to collapse
There is a light sensor on the front of the phone that turns the brightness up if there is a lot of light in the room, if there isn't a lot of light in the room the brightness decreases. As mentioned above you can control this auto-brightness function from the Power Control widget.
I wouldn't say it has any noticeable effect on your battery life, unless you always are in very bright environments that would make the sensor turn the display brightness all the way up.

Second Screen dimming

Just got the V10 and the second screen dims after 2 or 3 seconds after turning off the main screen. Is there a way to adjust the timing when the second screen dims? The dimmed second screen is almost unreadable because it is so dim.
Ditto, the idea that this is a replacement for a notification LED is really damaged by the dimming. (It's not just me that bought the phone based on that idea, right?) What I've found so far:
With the screen brightness set to 0, the second screen dims fully a few seconds after sleeping. Icons become about as noticeable as dust reflections.
With the screen brightness set to 100, the second screen follows the ambient light sensor after sleeping. Under bright light it turns itself up to the point where it's useable.
I've been playing with all the LEDs that Light Flow sees, but at least without root, nothing has any effect. I might look through the /sys files later. We probably need to get root first to figure this out.
On auto brightness it seems to be that the device adjusts the dimmed display for the ambient lighting? It's not the easiest thing in the world to see, but it's certainly not hard for me to see what notifications I have. I really prefer this over a colored LED.
Light Flow settings
For what it's worth, here's my current setup, now that the T-Mobile H901 is rooted. This does no one without root any good, and I don't know how it would translate to similar LED managers. I've been using Light Flow since the Sapphire (MyTouch 3G).
Light Flow device settings: check direct mode, root mode, and run every command as root. The Nexus 5 force reset option is checked by default and I don't know if that's relevant (no calls yet). Everything else in the menu is unchecked.
Let Light Flow control lcd-backlight-ex.
In a notification, set that "LED" to Solid and to 255 brightness. Check Enable Mixer and App controlled flash. With that last setting, the app will reset the brightness every few seconds even if the system dimmed it due to an ambient light change.
Now I need to edit some notification icons to be big and colorful. I wonder how this will impact battery life? Now the app is going to be awake all the time.
I've noticed that today on auto brightness the second screen will increase in light but not much. It also is not as smoth of a transition as on main display. It kinda jumps up real quick..
Yes for me I've noticed on Auto brightness the second screen will dim in a dark room and if you turn off your phone while in that room then come out... The second screen is still dim.... It's like th second screen doesn't respond to the light sensors at all unless the main screen is on.
Sent from my LG-H901 using XDA Free mobile app
It would have been nice if lg included the capability to change the second screen settings such a brightness or text color.
m0n0t0ne said:
It would have been nice if lg included the capability to change the second screen settings such a brightness or text color.
Click to expand...
Click to collapse
Another one of many things that it would be cool to see baked into a custom stock rom. Good stuff. I wonder if Cloudyfa might come over and cook on this awhile. I have always loved his stock Roms....
Sent from my LG-H901 using XDA Free mobile app
m0n0t0ne said:
It would have been nice if lg included the capability to change the second screen settings such a brightness or text color.
Click to expand...
Click to collapse
Color would be cool. A classic CRT bright/lime green, for instance, would probably show up much better than the white.
We need to get on their forums with these ideas. Maybe some will get squeezed into an update
An app which turns off auto dim in case screen is off would be pretty much help. Maybe I'll develop one.

Tilt-to-Ambient

Hey folks,
Does anyone know of a way to have the watch display in ambient mode (instead of turning fully on) when you tilt it? I find that the ambient mode is plenty bright and don't need or want it to light up fully when I just want to see the time. Any thoughts or ideas?
Switch off "turning on screen on tilt" (or something like that) in watch settings in Android Wear app

The screen is way too bright and there's no way to adjust it when outdoors

So when you're outdoors, even if it's overcast there's no way to slide the brightness down (It auto-snaps to full brightness) even though it's not needed.
I have situations where i could easily use half brightness but my phone forces auto max light
YES, I know i can disable auto brightness completely, but that would not be convenient.
Any fix for this?
I use an app called Lux. Tons of options with it.
todd3835 said:
I use an app called Lux. Tons of options with it.
Click to expand...
Click to collapse
It doesn't actually lower the brightness some sort of overlay , no?
lowspeed said:
It doesn't actually lower the brightness some sort of overlay , no?
Click to expand...
Click to collapse
Hmmmm, Im not sure how it works but it does have an auto mode which you can tweak on the fly.
I have noticed that also. It also jacks up the contrast to make it easier to see.
It makes pics you took look terrible when viewing them outside. I had to learn to NOT delete them until I check them indoors. I assumed some pics I took were crap at first, but it was just the jacked screen contrast that made them look bad.
On my S9+ in bright sunlight it happens that not only something happens to the contrast and colors (eg. reds become somewhat pinkish) but also black elements on screen start flickering/smudging while scrolling. It looks like the device turns into some sort of brightness boost mode.
Does anyone else experience anything like that?
bandit_knight said:
On my S9+ in bright sunlight it happens that not only something happens to the contrast and colors (eg. reds become somewhat pinkish) but also black elements on screen start flickering/smudging while scrolling. It looks like the device turns into some sort of brightness boost mode.
Does anyone else experience anything like that?
Click to expand...
Click to collapse
That's exactly what happens to me. Also if you slide the screen you can see how it the colors are totally distorted.
lowspeed said:
So when you're outdoors, even if it's overcast there's no way to slide the brightness down (It auto-snaps to full brightness) even though it's not needed.
I have situations where i could easily use half brightness but my phone forces auto max light
YES, I know i can disable auto brightness completely, but that would not be convenient.
Any fix for this?
Click to expand...
Click to collapse
Check out the screenshot. There's an option to enable brightness slider in the notification bar. Becomes easier to adjust brightness just by sliding down the notification bar.
sourabh.note said:
Check out the screenshot. There's an option to enable brightness slider in the notification bar. Becomes easier to adjust brightness just by sliding down the notification bar.
Click to expand...
Click to collapse
Did you read what the problem is? outdoors it snaps to max no matter what. (Unless not in auto mode)
Any solution for this problem?
Turn off auto brightness when outdoors..
Guys I've noticed that even if you turn off auto brightness go out in the sun and turn the screen up to max manually,it will kick up into super brightness mode or shine a led light at the sensor when indoors simulating the sun,just like it does with auto brightness on.sammy really want us to get burn in I think so we have to buy new screens all the time?
haircut123 said:
Guys I've noticed that even if you turn off auto brightness go out in the sun and turn the screen up to max manually,it will kick up into super brighmess mode or shine a led light at the sending when indoors simulating the sun,just like it does with auto brightness on.sammy really want us to get burn in I think so we have to buy new screens all the time
Click to expand...
Click to collapse
Never had a screen burn in on a Samsung phone. Don't worry
Guys, idk if this is a S10 only feature (or Android Pie), but when I'm on that situation, if I lower the brightness slider and leave it there for a second or two, the brightness will actually stay down and not jump back up again. Worth a try.
lowspeed said:
So when you're outdoors, even if it's overcast there's no way to slide the brightness down (It auto-snaps to full brightness) even though it's not needed.
I have situations where i could easily use half brightness but my phone forces auto max light
YES, I know i can disable auto brightness completely, but that would not be convenient.
Any fix for this?
Click to expand...
Click to collapse
After the S9+'s update to Pie some of the old settings get copied to the new OS, but if you don't go into the settings and check, things might not be configured correctly - I had to choose a different setting and then choose again what was previously selected to ensure that it was written into the Settings correctly.
With the new update the "Automatic Brightness" applies to the AOD - see here in this screenshot, my search of the Settings for the word "auto brightness", see what comes up in attachment #1.
What you need to do is go to the "Adaptive Brightness" and turn it on, then manually adjust your brightness under a few different conditions (EG: Indoors lights off, outside and overcast, and bright sunny day). Now your phone will understand what setting you want for different conditions and automatically adjust the brightness based on lighting conditions, see attachment #2.
The "auto brightness" is now used for the AOD, and has nothing to do with brightness when unlocked. The reason it "auto snaps to full brightness" is likely because previous settings were just copied over after the update and you haven't setup (and trained) the new "Adaptive Brightness" for various light levels. The AOD has both "Auto Brightness" and double-tap the clock to adjust AOD brightness.

Low dimming - Amazfit Pace

Hi M8´s,
When my watch in with screen "OFF", the dimming is too low and sometimes i even can see the hours ...
It´s possible to raise the dimming ? i allready try manual and auto dimming.
@ - When the screen is on everithing it´s ok... it´s only when it´s "off".
Thanks.
Hmmm, errrrr. When screen is off there is no backlight at all, you have to press the button or enable double tap/move wrist to wake up in Settings. If you want to use the watch in low light you may want to use an inverted watchface too (white background).

Categories

Resources