Hi M8´s,
When my watch in with screen "OFF", the dimming is too low and sometimes i even can see the hours ...
It´s possible to raise the dimming ? i allready try manual and auto dimming.
@ - When the screen is on everithing it´s ok... it´s only when it´s "off".
Thanks.
Hmmm, errrrr. When screen is off there is no backlight at all, you have to press the button or enable double tap/move wrist to wake up in Settings. If you want to use the watch in low light you may want to use an inverted watchface too (white background).
Related
I just got my LG G Watch yesterday, and I noticed last night when you leave it with the "always on" option where it dims the screen way down, that in the dark I can see the screen flickering. I tried all the different brightness levels in Settings to see if that would change it, but does not. Can anyone else confirm this? You'll have to get in pitch black environment to see this.
Also, is there a way to turn off the "shake n wake", where it turns the screen on from motion? I tend to sleep with a watch on, and noticed this watch is very sensitive to (or that I flop around like a fish when I sleep.. that's possible too) motion, and I'd rather be able to set it in "touch to wake" mode.
joeinbend said:
I just got my LG G Watch yesterday, and I noticed last night when you leave it with the "always on" option where it dims the screen way down, that in the dark I can see the screen flickering. I tried all the different brightness levels in Settings to see if that would change it, but does not. Can anyone else confirm this? You'll have to get in pitch black environment to see this.
Also, is there a way to turn off the "shake n wake", where it turns the screen on from motion? I tend to sleep with a watch on, and noticed this watch is very sensitive to (or that I flop around like a fish when I sleep.. that's possible too) motion, and I'd rather be able to set it in "touch to wake" mode.
Click to expand...
Click to collapse
I haven't noticed any flickering on mine, but I may just not be as sensitive to it. You can disable the 'wake by motion' function by muting the watch. (Pull down from the top of the screen)
johnus said:
I haven't noticed any flickering on mine, but I may just not be as sensitive to it. You can disable the 'wake by motion' function by muting the watch. (Pull down from the top of the screen)
Click to expand...
Click to collapse
Thanks for the tip on muting to stop the motion sensor from activating the watch. I find it very sensitive and just sitting at my desk working tends to make it constantly wake up. Muting also turns off vibration so I miss when a notification comes to the watch. Maybe in an OS update or possibly a Developer will enhance the settings so you can still get vibration alerts, but turn off motion wake.
Hi guys, is there any option or an app or something to lower the dimmed screen brightness? I like my watch always on, but I find it a bit to bright, especially at night.
uristic said:
Hi guys, is there any option or an app or something to lower the dimmed screen brightness? I like my watch always on, but I find it a bit to bright, especially at night.
Click to expand...
Click to collapse
Not being condescending at all... But have you tried the settings???
Freshly_Snipes said:
Not being condescending at all... But have you tried the settings???
Click to expand...
Click to collapse
Not the OP, but yeah, "1" is pretty bright in a dark room.
Freshly_Snipes said:
Not being condescending at all... But have you tried the settings???
Click to expand...
Click to collapse
well in the setting there's only setting for brithness when the watch's awake and an option to turn always on, which turn the display off.. I'd like it always on but just a bit darker
Try another watchface
Today I use the "Aviation Watch" and the dim mode is not full white but a little yellow and it is darker than other.
I have also the "Less is more" watchface and you can setup the font color for active and dim mode. I setup my dim color to dark grey and it is very dark in dim mode.
dersie said:
Try another watchface
Today I use the "Aviation Watch" and the dim mode is not full white but a little yellow and it is darker than other.
I have also the "Less is more" watchface and you can setup the font color for active and dim mode. I setup my dim color to dark grey and it is very dark in dim mode.
Click to expand...
Click to collapse
it's not about the background brightness of the watchface.. the screen backlit is always on, and I think it's too bright in dimmed mode.. at least at night. This is the only thing why I regret buying this over the samsung gear live as the amoled screen must look gorgeous in dimmed mode when only the numbers are visible.
I agree. Even with always on set to off, my screen lights up every time I get a notification.
Basically anybody near me could read it. I'd rather it just vibrate. And make me double tap to wake.
Sent from my Verizon LG G3 using Tapatalk
Using a clock face with the option of dimmed display settings like Pujie Black - Wear Watch Face turn off all dimmed and it's black display completely off, until wrist turns.
Almost all watchfaces from Smartwatch Bureaux have 2 brighness setup for active and dim mode. You can setup dim mode very very dark but backlight is always ON.
I would like an APP that I can set the Screen to OFF from 1 am until 8 am then back to always on. I dislike having to change the settings when I lay down and wake up.
That is the beauty of Android... some smart programer will write some code for an app and I will buy it...
Hi there,
Does anybody know of a way to lower or illuminate the light of the static - back/home/show all screens - buttons? When reading my phone in a dark room, the lights are quite heavy on the eyes.
Kind regards,
Martin
Mine seem to change with the screen brightness. Do you have your ambient display turned on.
bushbladewill said:
Mine seem to change with the screen brightness. Do you have your ambient display turned on.
Click to expand...
Click to collapse
Thnx for the reply! It does indeed change simultaneously with the screen brightness, but it will always stay on. I was wondering if maybe the button lights could be turned off completely and only appear when the screen is touched for example. But I'm guessing it's not possible.
Hi guys
I tried searching everywhere for two apps and can't find anything. I think it would be really simple but since there is no app to do this I find it strange, or maybe people don't need this...
The first one is a way to turn the screen on when I receive a notification on my watch (when ambient mode is off). I have a ticwatch E and find it really annoying to not have an option for this. Does anyone have any solution?
The other is brightness control when in ambient mode. I would like to lower the brightness of the watch when it is in ambient mode. I know that there was an app to do this (swapp true brightness or something like this) but it no longer works. Does anyone know one that works?
I found it is annoying too, I own a Ticwatch S and I want to turn off the Ambient light too but it can't pop up notification on screen after turning it off , also I wanted to turn down the brightness of the Ambient light because it make burn in on my screen after 4 month didn't change watch face
Hello, i've recently bought an Amazfit Stratos but i've a problem with my transreflective display.
If i set backlight to zero the display leave a little bit of backlight activated, so you can see a somekind of "a lighthouse in the night effect" especially in a dark room or in a place with low lights.
Is there a way to set the backlight completely off or to deactivate the always on display so that i can turn it on with buttons or doubletap?
Thank you for your reply!