I messed up mine Samsung S5 SM-G900F Firmware, please help! - Android Q&A, Help & Troubleshooting

I had a Movistar (Spain) firmware installed on my Samsung S5, and I wanted to replace it with some default Samsung firmware. It was working for a while but now it's stuck in Samsung logo bootloop. I tried like 5 different firmwares, one of them launched the phone but had some password on it, one of them just wouldn't go past the launch logo, one of them caused my motherboard to overheat like crazy, and last one gave me an error while trying to do the upgrade "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I was doing the upgrades with Odin. Please help me select the right firmware, I'm afraid to carry on on my own, I feel like I'll just do more damage.
Edit: I got this error in Odin when I tried flashing G900FXXU1CQDC
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 4137 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> persist.img.ext4
<ID:0/007> userdata.img.ext4
<ID:0/007> modem.bin
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> Receive Response from boot-loader
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Size)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Related

Singapore S3

Main issue in most android phone-battery.... i'm sick hearing and talking abt it. try this apps....this is my main battery saving measure. "2x Battery - Battery Saver" free version is good enough for majority user...i got the paid version for more customization option and support to Sam.
other than that, usual battery saving measure that u need to find out are, live wallpaper, apps refresh/update (facebook,twitter etc), animation setting, backup setting, screen brightness etc................
Odin update for LG1 ROM.
<ID:0/006> Added!!
<ID:0/006> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLG1_I9300OLBBLF1_I9300DXLF3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLG1_I9300OLBBLF1_I9300DXLF3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> system.img
<ID:0/007> NAND Write Start!!
<ID:0/007> boot.img
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> recovery.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Completed..
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Removed!!

Help with restoring stock firmware please GT-I9300T

Hi everyone,
So i'm new to firmwares and stuff.
So my phone recently stuffed up by for whatever reason restarting itself and freezing on the 'samsung gt-i9300t' screen.
So i went on to download mode and tried using the firmware provided by sammobile and used it with Odin but it didnt work. here is what the message says
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.m d5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> tz.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Some notes-
*recovery mode does not work, it just restarts the phone
*the phone is from the telstra company in australia
*i havent installed any roms before so it's been running on android
spaghettisauce said:
Hi everyone,
So i'm new to firmwares and stuff.
So my phone recently stuffed up by for whatever reason restarting itself and freezing on the 'samsung gt-i9300t' screen.
So i went on to download mode and tried using the firmware provided by sammobile and used it with Odin but it didnt work. here is what the message says
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.m d5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> tz.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Some notes-
*recovery mode does not work, it just restarts the phone
*the phone is from the telstra company in australia
*i havent installed any roms before so it's been running on android
Click to expand...
Click to collapse
tried flashing it again and it said
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
spaghettisauce said:
tried flashing it again and it said
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
does usb debugging is enabled check that
then use a different odin
sangalaxy said:
does usb debugging is enabled check that
then use a different odin
Click to expand...
Click to collapse
um i downloaded the drivers for my phone but im not sure how to check if debugging is on
should i use an older version of odin then?
sangalaxy said:
does usb debugging is enabled check that
then use a different odin
Click to expand...
Click to collapse
i tried what you said and this message shows up
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> tz.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
spaghettisauce said:
i tried what you said and this message shows up
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> tz.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
debugging is on settings-applications-development check that
and try an older version of odin1.85 will be better
try and post
sangalaxy said:
debugging is on settings-applications-development check that
and try an older version of odin1.85 will be better
try and post
Click to expand...
Click to collapse
i cant get to the debug option my phone is frozen in boot screen. odin 1.85 shows-
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> tz.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
spaghettisauce said:
i cant get to the debug option my phone is frozen in boot screen. odin 1.85 shows-
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300TDUELL2_I9300TTELELL2_I9300TDUELL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> tz.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
Click to expand...
Click to collapse
do you have kies running
If yes disable that
and be sure that you have the correct usb drivers or kies installed
and you can also try without battery
take out the battery and connect to pc then go into download mode
sangalaxy said:
do you have kies running
If yes disable that
and be sure that you have the correct usb drivers or kies installed
and you can also try without battery
take out the battery and connect to pc then go into download mode
Click to expand...
Click to collapse
i dont have kies and ive got the correct drivers
spaghettisauce said:
i dont have kies and ive got the correct drivers
Click to expand...
Click to collapse
the better is uninstall drivers and install kies and try connecting if you computer recognizes just fine the go with as above said without battery
sangalaxy said:
the better is uninstall drivers and install kies and try connecting if you computer recognizes just fine the go with as above said without battery
Click to expand...
Click to collapse
my phone doesnt turn on without battery
spaghettisauce said:
my phone doesnt turn on without battery
Click to expand...
Click to collapse
go into download mode after connecting to pc it will work without battery

Problems with GT-N8010

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8010XXUDNE4_N8010PHNDNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
i think my tablet is on N8000 bootloader but i can not found a other bootloader
and this error i have can anyone help me out

Failed to mount/efs on S7 edge

Hello,
I can't acces to my Android phone. I am stock on the screen samsung at the beginning.
The phone is not under USB debuggin, so impossible to use ADB shell to create the efs partition.
Impossible to use TWRP too, because no access to Android. So impossible to use in the recovery menu "mount / system"
So I try odin in download mode.
I use https://www.sammobile.com/samsung/g...e/SM-G935F/XEF/download/G935FXXU8ETI2/519832/
I try even with frija, but same files.
I had flash BL, AP, CP, CSC.
I try event to add in the option of odin Re-partition + the pit file (SM-HERO2LTE_EUR_OPEN.pit) + Nand erase.
Impossible to recreate the EFS partition, still have failed to mount /efs
Do you have a solution, perhaps using Apply update from SD card?
Thanks to help me please.
Regards.
Jl
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 4023 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Erase...
<ID:0/007> ERASE_SECTOR: 1203968
<ID:0/007> Get PIT for mapping..
<ID:0/007> ERASE_OK
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> param.bin
<ID:0/007> cm.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> modem.bin
<ID:0/007> modem_debug.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

Boot loop Samsung GT-N8005

Hi,
I tried to fix an old Note 10.1 GT-N8005 which is in a boot loop, it displays the Samsung Note Logo and resets forever. I can run Odin with Volume -.
I tried Odin on W10 with a stock file and Odin says it's a success (see below), but the Boot loop is still there. Odin on the tablet gives a strange information, that says INVALID RPMB DATA.
I googled around, I found that there might be a problem with the eMMC, might... I don't think so, because my wife told me, that the tablet worked ok until Samsung started an OTA Update, since the there is a boot loop. I don't think, that a Update can damage the hardware.
Any idea how to fix ist, if this error occurs and the eMMC might be ok?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 1673 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse

Categories

Resources