Hello i have a lg v30 h930 with pixel experience rom and i want to go back to stock rom but i can't. I can't boot into twrp because factory reset is disabled by kill switch and i can't use fastboot commands because there is no oem unlock option in settings. I can't connect to lgup and lg flash tool. Plz someone help me I'm Really stuck bad at this rom. I have a another lg v30 h930. Can i get a help from my another phone? Plz help me.
It should be: Turn Off Your device.
Now Press and Hold Volume Down+Power button for 2-3 Seconds Until LG Logo Appears.
Release the Buttons And Press and Hold them Again.
Hold the Buttons until the Recovery Mode Screen Appears.
Now You Are in the Recovery mode of Your device.
Dizzyrul3z said:
It should be: Turn Off Your device.
Now Press and Hold Volume Down+Power button for 2-3 Seconds Until LG Logo Appears.
Release the Buttons And Press and Hold them Again.
Hold the Buttons until the Recovery Mode Screen Appears.
Now You Are in the Recovery mode of Your device.
Click to expand...
Click to collapse
This may work too but the way I've done it and the way I've seen it explained is to "release the power button and press and hold it again, while leaving the volume down button pressed the entire time".
Related
A boot loop happen after i tried installing cyanogenmod 7 early realease from this forum. Now the device stuck in boot and will display cyanogenmod 7 blue circle around 3 -4 seconds over and over. Can anyone of you help me because i think i need to do a factory reset, but now it stuck in boot loop and it does not have a key combination to go into recovery mod. Help
Noone answer till now...
There is a key combination. Search it on google. How to boot lg optimus (your model) into recovery. Once in wipe data then wipe cache
Sent from my Nexus S using XDA App
Expansion
From searching other forums and google I found the following:
You can enter update mode by removing the battery, then while holding down the VOL + button plug in your usb cord(i assume while it's connected to your computer).
Then you can search the forums here and find:
[LG P970] Upgrade Kit 3.5
(the title is longer than this i just didn't put it all in here due to laziness)
This should help you in your quest of retrieving your phone from light up paperweight status. I don't really know though. Since I've never used your phone. Good luck.
recovery mode
you need to press the home button,volume -, and power,
to enter to the recovery mode.
sorry for my bad english.
Does not work on the LG-P970g from Telus aka Optimus Black
To get into Recovery mode :
Press and hold Volume down + Home key
then press and hold the above combination and also press and hold power button for a while
You'll get into Recovery mode
Hope it helped :angel:
awesomestvi said:
To get into Recovery mode :
Press and hold Volume down + Home key
then press and hold the above combination and also press and hold power button for a while
You'll get into Recovery mode
Hope it helped :angel:
Click to expand...
Click to collapse
works!!!!!!!!!!!!!!!11
Home Key?
but which key is home key on lg optimus p970?
can anyone please tell me the key combination for optimus black p970 to get into recovery mode.
i have cwm touch installed and can get into recovery mode with aneboot application.
but now i am stuck in bootloop. please help.
raevilman said:
but which key is home key on lg optimus p970?
can anyone please tell me the key combination for optimus black p970 to get into recovery mode.
i have cwm touch installed and can get into recovery mode with aneboot application.
but now i am stuck in bootloop. please help.
Click to expand...
Click to collapse
The Home key is actually the touch key on the Optimus Black..it's not a button but a touch input
The combination is the same as above :good:
Vol Down + Home not working for me! Straight booting into cm10.1
awesomestvi said:
To get into Recovery mode :
Press and hold Volume down + Home key
then press and hold the above combination and also press and hold power button for a while
You'll get into Recovery mode
Hope it helped :angel:
Click to expand...
Click to collapse
Doesn't work when you power up your device with those keys.
Power on your device before you press the key combination.
Took me a frustrating half an hour to find out...
washbeer said:
Doesn't work when you power up your device with those keys.
Power on your device before you press the key combination.
Took me a frustrating half an hour to find out...
Click to expand...
Click to collapse
can you please explain in a little more details?
tried to get into recovery with the instructions, but a straight boot!
BTW I am on stock gingerbread ROM rooted!
power up your phone, then press and hold vol down + home key and then also press and hold the power button until the phone restarts. then it should boot into recovery.
btw i made a small video tutorial
youtube.com/watch?v=Iu4O_zvrn6U
washbeer said:
power up your phone, then press and hold vol down + home key and then also press and hold the power button until the phone restarts. then it should boot into recovery.
btw i made a small video tutorial
youtube.com/watch?v=Iu4O_zvrn6U
Click to expand...
Click to collapse
Just watched your Youtube-Tutorial.
Thank you. Finally i can boot into recovery
washbeer said:
power up your phone, then press and hold vol down + home key and then also press and hold the power button until the phone restarts. then it should boot into recovery.
btw i made a small video tutorial
youtube.com/watch?v=Iu4O_zvrn6U
Click to expand...
Click to collapse
this dont work for me
vladnosferatu said:
this dont work for me
Click to expand...
Click to collapse
power up your phone, when the buttons start to blink (or the cm logo appears or whatever boot logo you have) press and hold vol down then press power button (home key is not really needed like the video ) . it also works on stock rom if you have a recovery installed.
note that it won't work at the early bootup when the lg logo appears or when android is booted and ready.
washbeer said:
power up your phone, when the buttons start to blink (or the cm logo appears or whatever boot logo you have) press and hold vol down then press power button (home key is not really needed like the video ) . it also works on stock rom if you have a recovery installed.
note that it won't work at the early bootup when the lg logo appears or when android is booted and ready.
Click to expand...
Click to collapse
Thanks a lot ! :laugh: You almost saved my life ! USB PC connexion don't work, I couldn't do anything else than achieving booting recovery without adb.
washbeer said:
power up your phone, when the buttons start to blink (or the cm logo appears or whatever boot logo you have) press and hold vol down then press power button (home key is not really needed like the video ) . it also works on stock rom if you have a recovery installed.
note that it won't work at the early bootup when the lg logo appears or when android is booted and ready.
Click to expand...
Click to collapse
It takes me in safe mode, i'm not even sure what it is (I guess is something similar to window's? It has less apps when I am in safe mode!
I'm not sure what to do, I tried to reboot in recovery mode with the ROM manager but it doesn't work (nothing of the ROM manager works actually).
Any ideas on what safe mode is?
Thanks!
UPDATE:
I tried this app to reboot in recovery mode
play.google.com/store/apps/details?id=com.siriusapplications.quickboot&hl=en
It rebooted the phone, the android robot showed up with some stuff turning in the stomach (like this: upload.wikimedia.org/wikipedia/commons/7/76/Android_Update_Screen.JPG) and then it turned on normally except that all my data now is gone (which is not a problem since I wanted to wipe it from the recovery mode, the problem is that I still can't get into recovery mode!
P.S.: it wouldn't let me post normal links because I'm a new member, I hope I didn't break any rule posting them like this! (after all it's not spam!)
Hi Guys,
anyone know if there is a reset button/battery pull simulation button on Redmi 3?, just wondering what to do if on the worst day i need to do some kind of battery pull when the OS crashes/bootloop.
Power on + Volume up. When screen on release both then press multiple times volume up button. Enter than you will know how to do!
Blue button / line = shutdown
Zanr Zij said:
Power on + Volume up. When screen on release both then press multiple times volume up button. Enter than you will know how to do!
Blue button / line = shutdown
Click to expand...
Click to collapse
maybe YOU do what to do, in chinese... we, in english, don't...
mrshark said:
maybe YOU do what to do, in chinese... we, in english, don't...
Click to expand...
Click to collapse
Just Press "Download" to start flash with MiFlash or do something more with English by press the title next to "Download"
For crashes, press power button 10+ seconds and it reboots. (Works in every ARM Android device i've tested.)
EDIT: I lost all my data since the phone was encrypted, but I recovered it flashing in fastboot mode
My Redmi 3 pro is stuck in a bootloader after trying to root it for the first time.
power off doesn't do anything.
power and volume up doesn't do anything
power and volume down shows a Fastboot logo with a cartoon, but I don't know what to do here and if it is useful.
After 1-2 minutes in fastboot logo it starts again in bootloop.
I think soon the battery will drain and the phone switch off
I really don't know what to do
its ok flash a tgz rom in fastboot mode
rekh said:
its ok flash a tgz rom in fastboot mode
Click to expand...
Click to collapse
Yeah, thank you.
I eventually managed to force shut down the device holding power and volum up, down the three togheter for long time.
Then I flashed Miu again and rooted.
Now I can't manage to encrypt, so still not satisfied
My brother fergot his password and therefore I need to factory reset the device using the recovery.
However, Volume up+ Power doesnt work for me, screen just goes black for a few seconds and it boots normally.
Anyone facing this issue too?
I have the Platinum 55d but...
I had trouble getting into recovery mode myself and this might help you.
Press and hold the power button and shortly thereafter press and hold the volume up button. Wait for the brand to load up and let go of the power button.
Wait for the android to show up. If it doesn't and the phone starts up normally, take out the battery and try again.
Once the android shows up hold the power button and tap the volume up button.
Same problem
I have the same problem
i start phone and try every way to get into recovery but cant get it on
did you find a fix?
me too! pls help!!
Thinking you can flash it with Sp-flashtool or http://www.mediafire.com/file/cgy6j622oq4lv7n/FACTORYDOWNLOAD_R2.9.9015.zip + driver
Offical firmware link etc. https://forum.xda-developers.com/android/help/archos-50c-platinum-archos-50cpl-twrp-2-t3594137
Btw sometimes it hard to boot into recovery so i use xposed to do that.
Old LG G5 I had previously installed Lineage on. Was in a drawer until I decided to charge it up and let one of my kids play games on it. When I input the correct screen lock pattern, it goes black, then comes back to lock screen.
I am able to hold power button to then select power off, restart, etc. From power off, I power on and get the orange triangle recommending to lock the bootloader. But no combination of power and vol-down or power and vol-up will get me to TWRP. It just rolls right back in to Lineage.
Also, from power off, if I plug in to my Linux laptop, it will power on and go to fastboot.
Feels like USB debug got turned off and/or trust somehow got revoked, but I never had this laptop connected to it so probably doesn't matter. But like I said, my unlock pattern is working. I get different response with correct pattern versus incorrect.
I'm also able to see the phone from my https://google.com/android/devicemanager page. I tried to send a secure and erase thinking it might let me start from scratch, but I only see a notification that "Device Located" and it never does anything.
And finally, lsusb -v does see the phone, but adb devices never does.
My question is any idea how to get back to TWRP to wipe and push an updated image or even put an updated TWRP?
Try this ...
It's like getting into Stock Recovery. To get into TWRP Recovery using button combination (hard reset) you'll need to hold volume down button and power button simultaneously, releasing power button (temporarily) once LG logo appears then quickly pressing and holding power button again, all the while maintaining hold on volume down button. The stock recovery message (white background) will appear requiring you to select volume up/down button to continue to reset software (see attached image). If you select yes it will appear to factory reset but will actually boot into TWRP.
Hope that helps!
Aimless Rambler said:
It's like getting into Stock Recovery. To get into TWRP Recovery using button combination (hard reset) you'll need to hold volume down button and power button simultaneously, releasing power button (temporarily) once LG logo appears then quickly pressing and holding power button again, all the while maintaining hold on volume down button. The stock recovery message (white background) will appear requiring you to select volume up/down button to continue to reset software (see attached image). If you select yes it will appear to factory reset but will actually boot into TWRP.
Hope that helps!
Click to expand...
Click to collapse
That did the trick! Thanks a ton.
dwcasey said:
That did the trick! Thanks a ton.
Click to expand...
Click to collapse
Good to hear!
after trying to downgrade from pie to oreo, with my korean version, i got stack on the logo screen,even after rebooting it gets stack there someone help
somene?anyone? @ChazzMatt please help us. stuck on LG V30ThinQ screen
To enter recovery:
1. Turn off the phone by holding down the power button for several seconds.
2. Hold down the Volume Down and power buttons simultaneously.
3. When the LG logo appears, release the power button and then press and hold it again.
4. Continue holding both buttons until the "Factory data reset" menu appears.
5. Choose Yes twice. With TWRP installed, it will enter that rather than perform a factory reset.
To enter download mode:
1. Connect a USB cable to your computer.
2. Turn off the phone by holding down the power button for several seconds.
3. Hold down the Volume Up button.
4. While still holding it down, plug in the other end of the USB cable.
You can now run patched LGUP and flash a KDZ. Note that, when you do, you can select only some parts, like the modem.