I decided to replace my AGNi kernel with Franco kernel, so I ran to TWRP took a backup of system and boot, and flashed the Franco kernel then tapped that clear dalvik/cache button(I remembered a guy said to clear dalvik cache after flashing a kernel. Then I tried to boot but it didn't work I thought it ended up bootlooping i decided to restore back, now I am here to ask what actually happened? Please help
Vijay G said:
I decided to replace my AGNi kernel with Franco kernel, so I ran to TWRP took a backup of system and boot, and flashed the Franco kernel then tapped that clear dalvik/cache button(I remembered a guy said to clear dalvik cache after flashing a kernel. Then I tried to boot but it didn't work I thought it ended up bootlooping i decided to restore back, now I am here to ask what actually happened? Please help
Click to expand...
Click to collapse
U need to go back to stock kernel and then flash franco.
Black_Stark said:
U need to go back to stock kernel and then flash franco.
Click to expand...
Click to collapse
Can I flash it over AGNi to replace it? I don't have backup
Vijay G said:
Can I flash it over AGNi to replace it? I don't have backup
Click to expand...
Click to collapse
If U dont have backup of stock kernel then dirty flash rom zip. It will replace it with stock kernel
Black_Stark said:
If U dont have backup of stock kernel then dirty flash rom zip. It will replace it with stock kernel
Click to expand...
Click to collapse
Isn't there any other method?
Vijay G said:
I decided to replace my AGNi kernel with Franco kernel, so I ran to TWRP took a backup of system and boot, and flashed the Franco kernel then tapped that clear dalvik/cache button(I remembered a guy said to clear dalvik cache after flashing a kernel. Then I tried to boot but it didn't work I thought it ended up bootlooping i decided to restore back, now I am here to ask what actually happened? Please help
Click to expand...
Click to collapse
Extract Boot.img from the previous Rom zip and flash it than flash Franco Kernel.
rjrulz007 said:
Extract Boot.img from the previous Rom zip and flash it than flash Franco Kernel.
Click to expand...
Click to collapse
I tried that but I think I ended up getting a boot loop,
I am RR ROM, I extracted the boot.img from zip then flash it in recovery and then flash FK, tried to reboot system but it looked like soft brick.
Vijay G said:
I tried that but I think I ended up getting a boot loop,
I am RR ROM, I extracted the boot.img from zip then flash it in recovery and then flash FK, tried to reboot system but it looked like soft brick.
Click to expand...
Click to collapse
Ok, this is the point when you forget about any data and you just want your device to work.
Try go to fastboot mode, it it can, flash zcx twrp recovery from pc (you can find it in this forum), than flash normal twrp img from this and reboot to recovery. (anyway if there is anything in the internal storage you can copy to pc at this point like photos etc.)
Wipe data, cache, dalvik, system, reinstall everything.
NEVER flash custom kernel over an other custom kernel.
Sophia92 said:
Ok, this is the point when you forget about any data and you just want your device to work.
Try go to fastboot mode, it it can, flash zcx twrp recovery from pc (you can find it in this forum), than flash normal twrp img from this and reboot to recovery. (anyway if there is anything in the internal storage you can copy to pc at this point like photos etc.)
Wipe data, cache, dalvik, system, reinstall everything.
NEVER flash custom kernel over an other custom kernel.
Click to expand...
Click to collapse
Sir actually sorry I think I wrote something wrong lol, my device is working and it has no data loss, I am back to life as before I took a backup of system and boot before doing anything like that, well thanks you have made me aware of
Not flashing custom kernel over custom kernel:good:
Vijay G said:
Sir actually sorry I think I wrote something wrong lol, my device is working and it has no data loss, I am back to life as before I took a backup of system and boot before doing anything like that, well thanks you have made me aware of
Not flashing custom kernel over custom kernel:good:
Click to expand...
Click to collapse
Ok I stucked at the point your device was bricked lol. Good that it works again.
Sophia92 said:
Ok I stucked at the point your device was bricked lol. Good that it works again.
Click to expand...
Click to collapse
I have decided, I will just flash AEX Pie in March when my exams end, since it already got escrima kernel in it( people say it's good for gaming) I will flash that instead of taking headaches of soft bricks and whatever bricks, just gotta focus on exams rn. Thank you for your concern :good:
Sorry double
Vijay G said:
I have decided, I will just flash AEX Pie in March when my exams end, since it already got escrima kernel in it( people say it's good for gaming) I will flash that instead of taking headaches of soft bricks and whatever bricks, just gotta focus on exams rn. Thank you for your concern :good:
Click to expand...
Click to collapse
You could just ask for the stock kernel from people in the forum where you got the ROM.
Related
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
blindox said:
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
Click to expand...
Click to collapse
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
+1
That would be my guess, the recovery.
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
live4nyy said:
+1
That would be my guess, the recovery.
Click to expand...
Click to collapse
ltdanno360 said:
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Be sure to let us know if it worked in case anyone else with the same issue can find the answer much easier.
blindox said:
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
Click to expand...
Click to collapse
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
blindox said:
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Click to expand...
Click to collapse
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
hello my friend,
i just made the WIPE CACHE AND WIPE DALVIK CACHE and the install of the ROM.
When i saw the screen NEUTRINO I was happy, until the time the ''system loading" getting black out for a couple seconds and then come right back. I knew there was something wrong.
Now I will make the process again with the factory data reset and then i will post what happened
Thanks
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
Yes, romracer is recommended. It is the only recovery that is specifically developed for the Atrix 4G. You could also try the TRWP Recovery but romracer's recovery is proven to work well and recommended by most.
Glad everything worked out.
blindox said:
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
Click to expand...
Click to collapse
so im running on speed rom 8.0 and everything is going fine but the audio is not working and i tried to look for any answers but nothing is working therefore im looking to see if anyone can help. all the other threads i found had no answer maybe i didnt look hard enough but this is frustrating so if anyone can help i would be really glad.
bryan1576 said:
so im running on speed rom 8.0 and everything is going fine but the audio is not working and i tried to look for any answers but nothing is working therefore im looking to see if anyone can help. all the other threads i found had no answer maybe i didnt look hard enough but this is frustrating so if anyone can help i would be really glad.
Click to expand...
Click to collapse
have you considered doing a full wipe and flashing the rom again, and fixing permissions or flashing a different rom to see if the audio works?
Ninjistix said:
have you considered doing a full wipe and flashing the rom again, and fixing permissions or flashing a different rom to see if the audio works?
Click to expand...
Click to collapse
when i flash a different rom the audio does work is there anyway i can fix it on this custom rom
bryan1576 said:
when i flash a different rom the audio does work is there anyway i can fix it on this custom rom
Click to expand...
Click to collapse
if the audio worked on one rom and not another, then the system files arent flashing properly.. what recovery are you using.. and like i said have you tried flashing the rom over.. and if so what steps do you take when doing a "full wipe" to flash the rom?
Ninjistix said:
if the audio worked on one rom and not another, then the system files arent flashing properly.. what recovery are you using.. and like i said have you tried flashing the rom over.. and if so what steps do you take when doing a "full wipe" to flash the rom?
Click to expand...
Click to collapse
im using 4ext and what i do is wipe dalvik cache and i did a factory reset then i installed the rom again
bryan1576 said:
im using 4ext and what i do is wipe dalvik cache and i did a factory reset then i installed the rom again
Click to expand...
Click to collapse
could it be the kernel because i have to flash the faux kernel123 so the phone can start up
bryan1576 said:
could it be the kernel because i have to flash the faux kernel123 so the phone can start up
Click to expand...
Click to collapse
okay, ill say this once again.. *then i think ill add it to my signature*... if you take the proper steps to flash a rom.. make sure that rom is working properly before you do any additional mods to the rom and then say something like the rom is broken or something isn't working../ and also what recovery are you using.. because if your s-on and using any other recovery other than 4EXT your kernel might not flash properly...
Ninjistix said:
okay, ill say this once again.. *then i think ill add it to my signature*... if you take the proper steps to flash a rom.. make sure that rom is working properly before you do any additional mods to the rom and then say something like the rom is broken or something isn't working../ and also what recovery are you using.. because if your s-on and using any other recovery other than 4EXT your kernel might not flash properly...
Click to expand...
Click to collapse
im using 4ext and s-on i felt like everything is correct also when i see videos its fastforward and ive seen other threads and people been saying the same thing so im not the only one.
try flashing speed rom 7.8 by doing the following...
wipe data/factory
format system
wipe cache partition
wipe delvik cache partition
flash rom
wipe delvik cache
boot rom
sit and wait till screen off and boot back into recovery
fix permissions and wipe delvik cache one more time
enjoy rom... do nandroid backup before applying all tweaks
make sure smart flash in 4ext is enabled-ed
Ninjistix said:
try flashing speed rom 7.8 by doing the following...
wipe data/factory
format system
wipe cache partition
wipe delvik cache partition
flash rom
wipe delvik cache
boot rom
sit and wait till screen off and boot back into recovery
fix permissions and wipe delvik cache one more time
enjoy rom... do nandroid backup before applying all tweaks
make sure smart flash in 4ext is enabled-ed
followed everything you said and still the same problem.. thanks for your help btw
Click to expand...
Click to collapse
hmm try downloading speed rom again.. maybe the files corrupt maybe or somethings missing from it.. or you know what just download a different rom.. since data got fixed in cm10 there's alot of new roms based off of cm10.. my fav roms are speed/fourthbar/cm10
Ninjistix said:
hmm try downloading speed rom again.. maybe the files corrupt maybe or somethings missing from it.. or you know what just download a different rom.. since data got fixed in cm10 there's alot of new roms based off of cm10.. my fav roms are speed/fourthbar/cm10
Click to expand...
Click to collapse
i just downloaded fourth bar and its great i love it and everything is working fine i just want to give you a big thanks for everything and for helping me :good:
it's no problem man, i look out for people having issues that i might have had before, or that i already read about somewhere... and yes fourthbar is one of my fav rom's for the amaze so far since its built on cm9 .. but its cool that everythings working once again.. don't forget to make nandroid backups after you flash a rom successfully and before you try and flash another rom
Hello,
I was trying to do a factory reset on my S2, and I noticed it doesn't delete my other files (Music, Photos, Etc.) but it does reset my apps installed. Because I want to totally erase my files, I went to recovery mode and did a wipe, and I think I may have wiped the data, system, dalvic, etc on the process. And now my phone wont boot up. It is stuck at the Siyah logo (Because I flashed siyah on it before and it was a success). After this, I tried to flash siyah again into my device and its still stuck. I dont know what to do anymore, I also tried factory resetting using recovery mode. I have flashed other kernels but it still doesn't work. BTW I am using a jelly bean device
Newbees said:
Hello,
I was trying to do a factory reset on my S2, and I noticed it doesn't delete my other files (Music, Photos, Etc.) but it does reset my apps installed. Because I want to totally erase my files, I went to recovery mode and did a wipe, and I think I may have wiped the data, system, dalvic, etc on the process. And now my phone wont boot up. It is stuck at the Siyah logo (Because I flashed siyah on it before and it was a success). After this, I tried to flash siyah again into my device and its still stuck. I dont know what to do anymore, I also tried factory resetting using recovery mode. I have flashed other kernels but it still doesn't work. BTW I am using a jelly bean device
Click to expand...
Click to collapse
did you fix permissions ?
slimlo said:
did you fix permissions ?
Click to expand...
Click to collapse
Sorry I'm nub, what is permissions? Can I find that on recovery mode?
Newbees said:
Sorry I'm nub, what is permissions? Can I find that on recovery mode?
Click to expand...
Click to collapse
yep in recovery mode
I found the fix permission Sir. Shall I flash again the kernel and do a fix permission?
Sir, it's still stuck at the Siyah logo
If you've formatted system as you say you will need to flash a rom, I'm running the latest neatrom lite, I'm confused by your post its 4am here
Sent from my GT-I9100 using Tapatalk 2
Hello sir, sorry if I disturbed your sleep XD no I did not flash a ROM. I just flashed a kernel using ODIN. Should I flash a ROM?
If I flash a new ROM, say the latest Snapdragon for S2 will the kernel be included in the package? I still cant pass the logo screen even though I have flashed different kernels
Newbees said:
If I flash a new ROM, say the latest Snapdragon for S2 will the kernel be included in the package? I still cant pass the logo screen even though I have flashed different kernels
Click to expand...
Click to collapse
the kernel is included most all roms doe and also make sure you follow all instructions on flashing properly... always make sure you do a backup )
gl
slimlo said:
the kernel is included most all roms doe and also make sure you follow all instructions on flashing properly... always make sure you do a backup )
gl
Click to expand...
Click to collapse
Thanks Sir Slim, I will try to flash the Snapdragon ROM as soon as after I finish downloading it. Because I believe I have cleared out the operating system and other important data on my device, that's why I need a new ROM.
Hi mate,
Do you run a stock ROM on your phone like you didnt flash any custom ROM on it....
Did you check if the SIYAH kernel you flashed on your device has STOCK ROM support, cause if the siya kernel you flashed has no support for stock rom it will just stay on the siyah logo the whole day until it drains out your battery.....
if you want to go to this website : http://dorimanx.shine.sk/ and dowload the v8.xxx those got stock rom support..... then do a wipe data factory reset....
if your phone booted up, and want to you wipe the phone completely, go to settings and do a factory reset there, your phone will prompt you if you want to wipe the memory card too.... put a check on it then follow the steps okay....
[email protected] said:
Hi mate,
Do you run a stock ROM on your phone like you didnt flash any custom ROM on it....
Did you check if the SIYAH kernel you flashed on your device has STOCK ROM support, cause if the siya kernel you flashed has no support for stock rom it will just stay on the siyah logo the whole day until it drains out your battery.....
if you want to go to this website : http://dorimanx.shine.sk/ and dowload the v8.xxx those got stock rom support..... then do a wipe data factory reset....
if your phone booted up, and want to you wipe the phone completely, go to settings and do a factory reset there, your phone will prompt you if you want to wipe the memory card too.... put a check on it then follow the steps okay....
Click to expand...
Click to collapse
Thank you sir! You are right that I did not have a custom ROM when I installed the Siyah kernel. Maybe that's the reason I was stuck
Newbees said:
Thank you sir! You are right that I did not have a custom ROM when I installed the Siyah kernel. Maybe that's the reason I was stuck
Click to expand...
Click to collapse
Nope it's not the right reasons may be you flashed a wrong siyah kernel.
Tell me your android version is it jellybean or ics
Sent from my GT-I9100 using xda premium
I did a factory reset on my phone and it just booted up in to twrp recovery mode and I cant get in out of it. Its stuck on it I even tried installing a custom rom to make sure i didnt delete everything somehow. Nothing is working I rooted my phone yestarday im still new to this stuff. Anyone have any ideas on how I can fix this?
Dileter said:
I did a factory reset on my phone and it just booted up in to twrp recovery mode and I cant get in out of it. Its stuck on it I even tried installing a custom rom to make sure i didnt delete everything somehow. Nothing is working I rooted my phone yestarday im still new to this stuff. Anyone have any ideas on how I can fix this?
Click to expand...
Click to collapse
I had this issue, too once. Can't recap what exactly fixed it, but I flashed TWRP again (think that didn't fix it) and then dirty flashed a ROM (in this case the same, which was already on the phone). If I remember correctly it worked after the later only. Might have also had to flash superSU. No data should be deleted if you just dirty flash (but do make a backup, should be no problem, since you are stuck in recovery anyway [emoji12]).
What ROM did you try to flash? You're rooted?
DidierMoulin said:
I had this issue, too once. Can't recap what exactly fixed it, but I flashed TWRP again (think that didn't fix it) and then dirty flashed a ROM (in this case the same, which was already on the phone). If I remember correctly it worked after the later only. Might have also had to flash superSU. No data should be deleted if you just dirty flash (but do make a backup, should be no problem, since you are stuck in recovery anyway [emoji12]).
What ROM did you try to flash? You're rooted?
Click to expand...
Click to collapse
Yes I am rooted and I tried flashing this ROM http://forum.xda-developers.com/lg-g5/development/unofficial-cyanogenmod-14-1-lg-g5-h850-t3494001
DidierMoulin said:
I had this issue, too once. Can't recap what exactly fixed it, but I flashed TWRP again (think that didn't fix it) and then dirty flashed a ROM (in this case the same, which was already on the phone). If I remember correctly it worked after the later only. Might have also had to flash superSU. No data should be deleted if you just dirty flash (but do make a backup, should be no problem, since you are stuck in recovery anyway [emoji12]).
What ROM did you try to flash? You're rooted?
Click to expand...
Click to collapse
I also dont really care if I lose photos or anything I already got all of them saved on my pc before I even started rooting the damn thing. I do need to ask tho how do you dirty flash and Do i just flash twrp normally since im already in it or ??? As I said im rlly new to this
TWRP can be flashed just from inside TWRP itself. Dirty flash means not do a factory reset before flashing.
Sorry that I can't remember what fixed it, but you can get out of it, 'cause I did, too...
Just wipe cache and dalvik/art cache then install separately TWRP, ROM, GAPPS, SUPERSU again and reboot after each install step to see of you reboot to TWRP again. That's what I did.
I use latest AICP ROM (http://forum.xda-developers.com/showthread.php?p=69699770) but that shouldn't matter.
Hope it helps.
DidierMoulin said:
TWRP can be flashed just from inside TWRP itself. Dirty flash means not do a factory reset before flashing.
Sorry that I can't remember what fixed it, but you can get out of it, 'cause I did, too...
Just wipe cache and dalvik/art cache then install separately TWRP, ROM, GAPPS, SUPERSU again and reboot after each install step to see of you reboot to TWRP again. That's what I did.
I use latest AICP ROM (http://forum.xda-developers.com/showthread.php?p=69699770) but that shouldn't matter.
Hope it helps.
Click to expand...
Click to collapse
Okay thanks a lot I will see if Any of it helps.
Please report.
DidierMoulin said:
Please report.
Click to expand...
Click to collapse
UPDATE I fixed it I just downgraded to the 2nd to lates version of twrp and it booted normally. Now I regret flashing the pixel one XDD If you have any idea for a good custom rom tell me Thanks for the help it actually helped a lot gave me the idea to downgrade the twrp recovery.
What you mean by pixel one xxd?
DidierMoulin said:
What you mean by pixel one xxd?
Click to expand...
Click to collapse
Its a 7.1.1 android rom from the google pixel
Dileter said:
Its a 7.1.1 android rom from the google pixel
Click to expand...
Click to collapse
Wait you were trying to flash recovery for a pixel device on your g5?
What TWRP build did you flash when you said you downgraded? 3.0.2-1 or 3.0.2-0 ? What is the date on the TWRP build?
Pphish20 said:
Wait you were trying to flash recovery for a pixel device on your g5?
What TWRP build did you flash when you said you downgraded? 3.0.2-1 or 3.0.2-0 ? What is the date on the TWRP build?
Click to expand...
Click to collapse
What he asked [emoji32]
It's happened to me too! Like three times lol. Just use UpperCut / LG UP to flash the latest nougat rom. That will fix the issue. You will need to re-root after that. There are instructions in this forum that tell how to do all of that. Good luck
Well and don't flash a ROM which is not for your device...
hi i tryed to convert my redmi note 4x to global when flashing with mi flash tool i did it without clean and after that firmware finish installing but got stuck in bootloop now i flashed twrp and tryed to flash custom rom but again bootloop when i check my storage it shows 9gb now when its actual is 32gb i think i disturbed partitions any solution available?
Are you able to boot into TWRP?? If not flash TWRP first using fastboot.
Once you have access to TWRP boot into it and perform a full wipe (System + Data + Cache + Dalvik + Internal Storage). Perform a format too after wipe to be on the safer side. Now copy a custom ROM or MIUI ROM to your Internal Storage or SD card through a computer. Once copied install your ROM.
If you flashed custom ROM flash Gapps after flashing ROM. Reboot.
If you flashed MIUI, flash lazyflasher after that(or phone will be stuck at MI logo). Reboot.
You can find download links for lazyflasher here on XDA or you can google it too.
ArK96 said:
Are you able to boot into TWRP?? If not flash TWRP first using fastboot.
Once you have access to TWRP boot into it and perform a full wipe (System + Data + Cache + Dalvik + Internal Storage). Perform a format too after wipe to be on the safer side. Now copy a custom ROM or MIUI ROM to your Internal Storage or SD card through a computer. Once copied install your ROM.
If you flashed custom ROM flash Gapps after flashing ROM. Reboot.
If you flashed MIUI, flash lazyflasher after that(or phone will be stuck at MI logo). Reboot.
You can find download links for lazyflasher here on XDA or you can google it too.
Click to expand...
Click to collapse
awais_666 said:
hi i tryed to convert my redmi note 4x to global when flashing with mi flash tool i did it without clean and after that firmware finish installing but got stuck in bootloop now i flashed twrp and tryed to flash custom rom but again bootloop when i check my storage it shows 9gb now when its actual is 32gb i think i disturbed partitions any solution available?
Click to expand...
Click to collapse
@ArK96 is right but the only thing i suggest is to, flash miui and lazyflasher first so as to properly set up the initial firmware, and partitioning. After miui boots properly, you can do anything you want. :highfive:
ArK96 said:
Are you able to boot into TWRP?? If not flash TWRP first using fastboot.
Once you have access to TWRP boot into it and perform a full wipe (System + Data + Cache + Dalvik + Internal Storage). Perform a format too after wipe to be on the safer side. Now copy a custom ROM or MIUI ROM to your Internal Storage or SD card through a computer. Once copied install your ROM.
If you flashed custom ROM flash Gapps after flashing ROM. Reboot.
If you flashed MIUI, flash lazyflasher after that(or phone will be stuck at MI logo). Reboot.
You can find download links for lazyflasher here on XDA or you can google it too.
Click to expand...
Click to collapse
thank you for a quick reply yes i am able to go into twrp and i did format system data cache dalvik and internal storage and after wipe did format too but still stuck at same issue and when i open the internal storage in my computer it shows only 9gb storage
MyNameIsRage said:
@ArK96 is right but the only thing i suggest is to, flash miui and lazyflasher first so as to properly set up the initial firmware, and partitioning. After miui boots properly, you can do anything you want. :highfive:
Click to expand...
Click to collapse
ok so the normal global firmware will do? i didnt do with lazyflasher but will do it now
awais_666 said:
ok so the normal global firmware will do? i didnt do with lazyflasher but will do it now
Click to expand...
Click to collapse
you mean the global rom? yes the one you downloaded from en.miui.com
MyNameIsRage said:
you mean the global rom? yes the one you downloaded from en.miui.com
Click to expand...
Click to collapse
yes thats the one downloading now thank you guys for quick response ill update once done
@MyNameIsRage thank you for correcting me.
Yes. Please do flash MIUI and lazy first. Looks like you messed up your partitions.
Peace.
hey guys i tryed the following method luckily now storage is shown as 23 gb but when i flash miui rom in twrp the process doesnt complete its like the process bar goes till 95 percent and after that it keeps flashing but nothing happening i left the phone like this for 2 hours for 2 times but nothing happened am i doing something wrong here
awais_666 said:
hey guys i tryed the following method luckily now storage is shown as 23 gb but when i flash miui rom in twrp the process doesnt complete its like the process bar goes till 95 percent and after that it keeps flashing but nothing happening i left the phone like this for 2 hours for 2 times but nothing happened am i doing something wrong here
Click to expand...
Click to collapse
After flashing MIUI and lazy you flashed MIUI again is that what you are saying?
ArK96 said:
After flashing MIUI and lazy you flashed MIUI again is that what you are saying?
Click to expand...
Click to collapse
nop i formatted everything and then install miui rom for redmi note 4x which doesnt finish installing
awais_666 said:
nop i formatted everything and then install miui rom for redmi note 4x which doesnt finish installing
Click to expand...
Click to collapse
Go here and download the Global Stable worldwide release version firmware.
Boot into twrp wipe and format everything. Also after that reflash TWRP again using fastboot.
Once reflashed boot into TWRP and again perform a full wipe and format, then install the downloaded firmware zip. After that reboot TWRP and try flashing MIUI.
ArK96 said:
Go here and download the Global Stable worldwide release version firmware.
Boot into twrp wipe and format everything. Also after that reflash TWRP again using fastboot.
Once reflashed boot into TWRP and again perform a full wipe and format, then install the downloaded firmware zip. After that reboot TWRP and try flashing MIUI.
Click to expand...
Click to collapse
cool will try that in a while just a quick question i read somewhere that do the same process with red wolf recovery rather then twrp does that make any difference
awais_666 said:
cool will try that in a while just a quick question i read somewhere that do the same process with red wolf recovery rather then twrp does that make any difference
Click to expand...
Click to collapse
Yes. Red wolf is more MIUI friendly, it is made with OTA survival in mind. But your issue is that the ROM is not getting flashed. You can try what I said above about TWRP reflash, if it doesn't work you can go ahead and try redwolf. REDWOLF is nothing but modded TWRP, base code is still TWRP.
ArK96 said:
Yes. Red wolf is more MIUI friendly, it is made with OTA survival in mind. But your issue is that the ROM is not getting flashed. You can try what I said above about TWRP reflash, if it doesn't work you can go ahead and try redwolf. REDWOLF is nothing but modded TWRP, base code is still TWRP.
Click to expand...
Click to collapse
hey mate finally i got time to do the procedure i flashed the kernel that you told and on top of it the firmware and lazyflasher it went through in just few minutes and was all done and working perfectly now thanks alot
awais_666 said:
hey mate finally i got time to do the procedure i flashed the kernel that you told and on top of it the firmware and lazyflasher it went through in just few minutes and was all done and working perfectly now thanks alot
Click to expand...
Click to collapse
Good job mate.