audio and mic not working also cant hear no music - HTC Amaze 4G

so im running on speed rom 8.0 and everything is going fine but the audio is not working and i tried to look for any answers but nothing is working therefore im looking to see if anyone can help. all the other threads i found had no answer maybe i didnt look hard enough but this is frustrating so if anyone can help i would be really glad.

bryan1576 said:
so im running on speed rom 8.0 and everything is going fine but the audio is not working and i tried to look for any answers but nothing is working therefore im looking to see if anyone can help. all the other threads i found had no answer maybe i didnt look hard enough but this is frustrating so if anyone can help i would be really glad.
Click to expand...
Click to collapse
have you considered doing a full wipe and flashing the rom again, and fixing permissions or flashing a different rom to see if the audio works?

Ninjistix said:
have you considered doing a full wipe and flashing the rom again, and fixing permissions or flashing a different rom to see if the audio works?
Click to expand...
Click to collapse
when i flash a different rom the audio does work is there anyway i can fix it on this custom rom

bryan1576 said:
when i flash a different rom the audio does work is there anyway i can fix it on this custom rom
Click to expand...
Click to collapse
if the audio worked on one rom and not another, then the system files arent flashing properly.. what recovery are you using.. and like i said have you tried flashing the rom over.. and if so what steps do you take when doing a "full wipe" to flash the rom?

Ninjistix said:
if the audio worked on one rom and not another, then the system files arent flashing properly.. what recovery are you using.. and like i said have you tried flashing the rom over.. and if so what steps do you take when doing a "full wipe" to flash the rom?
Click to expand...
Click to collapse
im using 4ext and what i do is wipe dalvik cache and i did a factory reset then i installed the rom again

bryan1576 said:
im using 4ext and what i do is wipe dalvik cache and i did a factory reset then i installed the rom again
Click to expand...
Click to collapse
could it be the kernel because i have to flash the faux kernel123 so the phone can start up

bryan1576 said:
could it be the kernel because i have to flash the faux kernel123 so the phone can start up
Click to expand...
Click to collapse
okay, ill say this once again.. *then i think ill add it to my signature*... if you take the proper steps to flash a rom.. make sure that rom is working properly before you do any additional mods to the rom and then say something like the rom is broken or something isn't working../ and also what recovery are you using.. because if your s-on and using any other recovery other than 4EXT your kernel might not flash properly...

Ninjistix said:
okay, ill say this once again.. *then i think ill add it to my signature*... if you take the proper steps to flash a rom.. make sure that rom is working properly before you do any additional mods to the rom and then say something like the rom is broken or something isn't working../ and also what recovery are you using.. because if your s-on and using any other recovery other than 4EXT your kernel might not flash properly...
Click to expand...
Click to collapse
im using 4ext and s-on i felt like everything is correct also when i see videos its fastforward and ive seen other threads and people been saying the same thing so im not the only one.

try flashing speed rom 7.8 by doing the following...
wipe data/factory
format system
wipe cache partition
wipe delvik cache partition
flash rom
wipe delvik cache
boot rom
sit and wait till screen off and boot back into recovery
fix permissions and wipe delvik cache one more time
enjoy rom... do nandroid backup before applying all tweaks
make sure smart flash in 4ext is enabled-ed

Ninjistix said:
try flashing speed rom 7.8 by doing the following...
wipe data/factory
format system
wipe cache partition
wipe delvik cache partition
flash rom
wipe delvik cache
boot rom
sit and wait till screen off and boot back into recovery
fix permissions and wipe delvik cache one more time
enjoy rom... do nandroid backup before applying all tweaks
make sure smart flash in 4ext is enabled-ed
followed everything you said and still the same problem.. thanks for your help btw
Click to expand...
Click to collapse

hmm try downloading speed rom again.. maybe the files corrupt maybe or somethings missing from it.. or you know what just download a different rom.. since data got fixed in cm10 there's alot of new roms based off of cm10.. my fav roms are speed/fourthbar/cm10

Ninjistix said:
hmm try downloading speed rom again.. maybe the files corrupt maybe or somethings missing from it.. or you know what just download a different rom.. since data got fixed in cm10 there's alot of new roms based off of cm10.. my fav roms are speed/fourthbar/cm10
Click to expand...
Click to collapse
i just downloaded fourth bar and its great i love it and everything is working fine i just want to give you a big thanks for everything and for helping me :good:

it's no problem man, i look out for people having issues that i might have had before, or that i already read about somewhere... and yes fourthbar is one of my fav rom's for the amaze so far since its built on cm9 .. but its cool that everythings working once again.. don't forget to make nandroid backups after you flash a rom successfully and before you try and flash another rom

Related

[Q] NOOB flashing question

I'm currently running CM10.1 nightlies, I quite fancy trying out a stock based ROM, can I just flash as usual using a ROM manager from the phone being turned on or will i need to flash back to stock first?
Thanks
batjon said:
I'm currently running CM10.1 nightlies, I quite fancy trying out a stock based ROM, can I just flash as usual using a ROM manager from the phone being turned on or will i need to flash back to stock first?
Thanks
Click to expand...
Click to collapse
the best stock based rom i have come across is this - http://forum.xda-developers.com/showthread.php?t=1998701&highlight=phenom
You don't need to flash a stock rom with Odin and your PC, just use CWM. Just follow the instructions on the page, i've pasted them below for your convenience.
***COMING FROM A DIFFERENT ROM A FULL WIPE IS RECOMMENDED***
***FULL WIPE***
MAKE A NANDROID BACKUP
Wipe data/factory reset in recovery
Wipe Cache & Davilk Cache
Flash Rom in CWM
Reboot
[EDIT] "can I just flash as usual using a ROM manager from the phone being turned on" - yes.
squ89r97 said:
the best stock based rom i have come across is this - http://forum.xda-developers.com/showthread.php?t=1998701&highlight=phenom
You don't need to flash a stock rom with Odin and your PC, just use CWM. Just follow the instructions on the page, i've pasted them below for your convenience.
***COMING FROM A DIFFERENT ROM A FULL WIPE IS RECOMMENDED***
***FULL WIPE***
MAKE A NANDROID BACKUP
Wipe data/factory reset in recovery
Wipe Cache & Davilk Cache
Flash Rom in CWM
Reboot
[EDIT] "can I just flash as usual using a ROM manager from the phone being turned on" - yes.
Click to expand...
Click to collapse
Thanks man, appreciate it. Thanks for not saying "this has been asked before, moderator close this NOW!"
safe
batjon said:
Thanks man, appreciate it. Thanks for not saying "this has been asked before, moderator close this NOW!"
safe
Click to expand...
Click to collapse
You're welcome, you could hit the thanks button seeing as I was so kind
batjon said:
I'm currently running CM10.1 nightlies, I quite fancy trying out a stock based ROM, can I just flash as usual using a ROM manager from the phone being turned on or will i need to flash back to stock first?
Thanks
Click to expand...
Click to collapse
You have to do a megawipe if coming back from 4.2 roms, as these roms change the folder structure of internal storage. Dont forget to backup everything in your internal storage or you will lose them.
Many others have faced problems later by not doing a megawipe.
lefttobleed - pardon my ignorance, can this be done within the ROM manager or is it worth going into recovery to do this? I don't have my phone for a couple of days so I can't currently check settings.
Thanks
batjon said:
lefttobleed - pardon my ignorance, can this be done within the ROM manager or is it worth going into recovery to do this? I don't have my phone for a couple of days so I can't currently check settings.
Thanks
Click to expand...
Click to collapse
you have to go into recovery and flash the megawipe aroma file. sorry i dont remember the link for the file. Search for it.
Please note that i am not familiar with rom manager so i dont know whether this can be done with rom manager. I always flash through recovery.
Edit: Please dont try this through rom manager... i feel something might go really wrong.

Wifi not working after flashing Liquidsmooth

I flashed liquidsmooth rom today but soon after flashing i noticed tht Wifi didnt work.I tried changing the rom but same problem,My WIFI doesnt working on any custom roms be it sammy or Aosp.but it works on stock 4.1.1.Everytime i try to use the Wifi on other roms it always keeps on saying wrong key.Doesnt even working on my previous roms on which it worked perfectly before flashing liquid rom. Any help would be great.
Sent from my GT-I9300
Better ask the dev of that ROM..
Try wipe data/ factory reset and flash cm10.1
BHARGAV33 said:
Better ask the dev of that ROM..
Try wipe data/ factory reset and flash cm10.1
Click to expand...
Click to collapse
Tried but no response
Sent from my GT-I9300
adilrenzu said:
Tried but no response
Sent from my GT-I9300
Click to expand...
Click to collapse
Try super wipe and flash cm10.1 or stock (my preference) ..
Coz whatever bugs you have.. They will be cleaned by stock..
Try a super wipe and install a stock rom....then try flashing the rom again. Before flashing, dont forget to wipe cache,data,dalvik cache and format the /system folder.
Hope this helps.

[Q][SOLVED] S3 with CM10 stuck on boot animation!

I installed a zip through ClockworkMod I shouldn't of installed on my i9300 with CM10 and now it's stuck in the boot animation.
The zip I installed is a fix that supposedly added the option of selecting USB Mass Storage instead of MTP. Someone linked it from another thread and after installing it, I tried booting my phone but it got stuck, then I figured out that the zip was only for the Sony WT19i.
Here it is: http://forum.xda-developers.com/attachment.php?attachmentid=1532624&d=1354526908
Any way to fix this? I really don't want to factory reset
Best bet as you have flashed something that dont belong on your phone is to full wipe and Reflash your rom. Try a dirty flash but I would full format system and data and reflash. Lucky you didnt brick it mate.
I9100/I9300
Reflash rom
Sent from my GT-I9300 using Tapatalk 4
andrewwright said:
Best bet as you have flashed something that dont belong on your phone is to full wipe and Reflash your rom. Try a dirty flash but I would full format system and data and reflash. Lucky you didnt brick it mate.
I9100/I9300
Click to expand...
Click to collapse
I did a dirty flash of the latest CM10 build and surpringly, everything is exactly as I left it! Thanks for the help
If you flash anything that goes into /system and the rom breaks, reflashing the rom is all that's needed. Basic partition layout understanding.
Sent from my GT-I9300 using Tapatalk 4
Error503 said:
I did a dirty flash of the latest CM10 build and surpringly, everything is exactly as I left it! Thanks for the help
Click to expand...
Click to collapse
Ok mate but do read what @rootSU has put to as he knows what he talking about. Glad its working :thumbup:
I9100/I9300

[Q]

hi .am using xperia u,and have installed kernel phantom.while installing firebean i had a problem.1ly the boot animation is visible and not able to enter into the menu.pls give me some suggetions to over come this problem..
tnks..
did you wipe cache and dvalik and data before flashing?
Sent from my AOSP 4.3 Xperia S via Tapatalk
Enter in to recovery, wipe cache/dalvik and reboot system, if it don't works then reflash the ROM.
If you are installing the ROM by flashing from CWM Recovery, wipe cache/dalvik before flashing.
If you are installing a custom ROM over another ROM might also cause this problem. so clear data also..
Ben36 said:
did you wipe cache and dvalik and data before flashing?
Sent from my AOSP 4.3 Xperia S via Tapatalk
Click to expand...
Click to collapse
ya i done
tharansakthi said:
Enter in to recovery, wipe cache/dalvik and reboot system, if it don't works then reflash the ROM.
If you are installing the ROM by flashing from CWM Recovery, wipe cache/dalvik before flashing.
If you are installing a custom ROM over another ROM might also cause this problem. so clear data also..
Click to expand...
Click to collapse
i have done everything....but sony logo is only visible.
tnks...
rajkumar93 said:
i have done everything....but sony logo is only visible.
tnks...
Click to expand...
Click to collapse
try flashing another custom kernel, and try to enter into recovery.. if you can enter clear cache, data, dalvik and try booting system.
If this doesn't works you might be doing something wrong. please re do the things which I told you in the previous post. It seems you are skipping some parts.
Flashing Stock FW for Xperia U must bring you out of this. Have you tried out finding the correct FirmWare for your device. I think the latest FW is based on jelly bean and build version is 6.2.A.x.xx....
tharansakthi said:
try flashing another custom kernel, and try to enter into recovery.. if you can enter clear cache, data, dalvik and try booting system.
If this doesn't works you might be doing something wrong. please re do the things which I told you in the previous post. It seems you are skipping some parts.
Flashing Stock FW for Xperia U must bring you out of this. Have you tried out finding the correct FirmWare for your device. I think the latest FW is based on jelly bean and build version is 6.2.A.x.xx....
Click to expand...
Click to collapse
hey thanks bro.... my mobile working perfectly ....thanks...
rajkumar93 said:
hey thanks bro.... my mobile working perfectly ....thanks...
Click to expand...
Click to collapse
good to hear that @rajkumar93, next time when you post the question give it proper title, that will help others to help you well...

[SOLVED] Galaxy S3 not booting any AOSP/AOKP Custom ROMs. Stuck on Sammy?

I searched the internet and threads on XDA for this problem but couldn't really find one!
The problem is- My Galaxy S3 (GT-I9300) doesn't boot any AOSP/AOKP/CM ROMs! It's just the bootanimation and DONE! For hours and hours the bootanimation only! But I can flash any Sammy 4.3 / 4.4 ROMs! They boot! They work properly!
I used to change to AOSP to Sammy and vice versa so many times with no issues. One day I downloaded the UltimaAOSP Valhalla ROM and flashed it. This was the first time my S3 didn't boot. I flashed custom Kernels like boeffla on it but all in vain. It was stuck on the bootanimation. I flashed NeatROM AOSP on top of it, which worked properly. Then it was with the fusion sp ROM that it didn't boot again. Again I flashed NeatROM AOSP on top of it (it's my favorite ROM), which I used just to copy some other ROM from my PC to my phone.
Now, I'm on my Stock ROM which came with my phone since so long! I'm shocked to see now NO AOSP ROMs are booting! I've used C-ROM, NeatROM, Resurrection Remix and SOKP Milestone. I have the ROMs' ZIP files and also a Nandroid Backup which I made when I changed to other ROMs. Not the ZIP files neither the Nandroid Backups are helping! ZIP files get flashed succesfully (I wipe the data & cache & dalvik-cache every time) and the Nandroid Backups get restored successfully! But always the phone gets stuck on the bootanimation!
I always moved to AOSP from Sammy (never Sammy to Sammy) but this time I gave it a shot.
Result : All the Samsung ROMs are flashing, working properly, even the Nandroid restores boot. I flashed my newly downloaded FlashingDroid Sammy 4.4 ROM which also works.
BUT I CAN'T GET THE AOSP ROMs onto my phone!
My thought (it could be wrong) : Is it to do something with the data in a partition other than system, data, and cache? Some partition which has stored files needed to boot Sammy ROMs and is preventing AOSP ROMs to start?
HELP!
:crying:
MORE UPDATED INFO ON POST #6
::ROBLEM SOLVED:::
Wipe system, data, cache and preload partitions manually in mounts and storage in CWM Recovery.
DONE! AOSP Working!
Suggests something is being left behind that aosp objects to. Try the rescue firmware in general forum, wipe internal sd and preload.
boomboomer said:
Suggests something is being left behind that aosp objects to. Try the rescue firmware in general forum, wipe internal sd and preload.
Click to expand...
Click to collapse
Have lots of data on my internal memory! Still I deleted lots of unwanted files. Any other way to wipe the hidden preload partition other than using Philz Recovery? I remember I flashed Philz after which I couldn't restore any of my Nandroid Backups backed up with CWM Recovery..
Sent from my GT-I9300 using XDA Premium 4 mobile app
In cwm mounts and storage wipe preload
Press thanx if i helped you in anyway...
Update - Got More Info
Update : Just noticed that when it's the bootanimation on the screen after flashing an AOSP ROM, pressing any of the buttons on the phone vibrates the phone vigorously 2 times.. why??
Also, I want to ask about the connection between a kernel and a bootanimation without starting a new thread 'cause I think it's the solution to my problem here.. The data which I probably suspect that prevents AOSP ROMs from booting is some different bootanimation file? I mean when I'm on a Sammy ROM, I started to flash different bootanimations after flashing some CWM Custom Bootanimation ZIP file. The bootanimation changes on all Kernels on Sammy ROMs -except 1 that is the boeffla kernel. The strange thing is that the first custom bootanimation I had flashed (after flashing Boeffla's Sammy Kernel) when I switched to Sammy from my last AOSP was the hTC One Bootanimation which worked fine (the bootanimation successfully changed). After that, it never changed. My phone always booted up showing the hTC One Bootanimation no matter how many times I flashed another bootanimation ZIP or the CWM ZIPs which enable/disable Custom bootanimations. But! When I changed to any other kernel (the stock that came with the ROM/GoogyMax 2/AGNi), the bootanimation was the last one flashed by me before changing the kernel. I could change the bootanimations successfuly every time after that. Now, I flashed Android Revolution HD ROM and was on Stock Kernel. As soon as I changed to boeffla kernel (without flashing any other ZIP), the bootanimation changed! (automatically!) And it was again the same old hTC One Bootanimation.
Can someone please tell me WHERE is this bootanimation data and the data that prevents AOSP ROMs to boot is stored? Certainly not in the data or system or cache partition...
Update 2 : Just figured out where the automatic htc bootanimation magic happened. The hTC bootanimation.zip file was found in data/local . However, I always knew the bootanimation directory as system/media.. So now, is it safe for me to delete all files in data/local 'cause it seems it is the problem for AOSP ROMs?
Sent from my GT-I9300 using XDA Premium 4 mobile app
the main thing i can think of is your trying to go back to jb roms which you cant do as far as i know try flashing kitkat based roms
jimbobpro87 said:
the main thing i can think of is your trying to go back to jb roms which you cant do as far as i know try flashing kitkat based roms
Click to expand...
Click to collapse
I'm not trying to go back to Jelly Bean! I'm flashing AOSP based ROMs of KitKat 4.4.2 which don't boot!
SOLVED!
Yayy!
I guess I got a solution!
Wiped system, data, cache and preload partitions manually in mounts and storage in my CWM Recovery.
DONE! AOSP Working!
:victory:
THANKS TO ALL WHO HELPED! :angel:
Thank you for your post.
I am having the same problem, phone not booting past boot animations using aosp ROMs. Haven't tried Sammy ROM to test the theory yet but will try soon.
How do you wipe preload? In mounts and storage, I get an error when trying to mount or format preload using CWM 6.0.4.7
I don't see an option to wipe anything other than data, cache, or dalvic.
alaska_ryder said:
How do you wipe preload? In mounts and storage, I get an error when trying to mount or format preload using CWM 6.0.4.7
I don't see an option to wipe anything other than data, cache, or dalvic.
Click to expand...
Click to collapse
Strange- it happened that day but not now. Even I get an error formatting preload. But! I guess the problem is the system partition! There IS an option to format /system in mounts and storage option on the first screen.
Sent from my GT-I9300 using XDA Premium 4 mobile app
This is really an old post i think.
But, can someone answer me please, ive been searching for This maybe for more than a year. Can someone please help me? @Paresh Kalinani
I have the exact same issue.
My device: Grand Prime (G530FXXU1AOJI baseband)
Stock android: 5.0.2
Recovery: TWRP 3.1.0.0
I have booted many Samsung roms and also ported many of them like J5's 5.1.1 , On7's 5.1.1 rom and many other 5.1.1 and 5.0.2 roms and all of them work perfectly. But when it comes to AOSP ROMS each of them keeps loading at the booting animation screen. Ive tried many roms like RR, AOSP Extended, Cyanogenmod, LINEAGEOS, All of these 5.1.1 , 7.1.1.
It booted for others with the exact Same variant as mine too.
Please help me?
Id been really grateful.
Thanks,
Eden532
Eden532 said:
This is really an old post i think.
But, can someone answer me please, ive been searching for This maybe for more than a year. Can someone please help me? @Paresh Kalinani
I have the exact same issue.
My device: Grand Prime (G530FXXU1AOJI baseband)
Stock android: 5.0.2
Recovery: TWRP 3.1.0.0
I have booted many Samsung roms and also ported many of them like J5's 5.1.1 , On7's 5.1.1 rom and many other 5.1.1 and 5.0.2 roms and all of them work perfectly. But when it comes to AOSP ROMS each of them keeps loading at the booting animation screen. Ive tried many roms like RR, AOSP Extended, Cyanogenmod, LINEAGEOS, All of these 5.1.1 , 7.1.1.
It booted for others with the exact Same variant as mine too.
Please help me?
Id been really grateful.
Thanks,
Eden532
Click to expand...
Click to collapse
Have you flashed the rom then factory reset?
Beamed in by telepathy.
shivadow said:
Have you flashed the rom then factory reset?
Beamed in by telepathy.
Click to expand...
Click to collapse
Nope.
I wiped system, data, cache and dalvik cache the flashed the rom and the rebooted?
Do I have to do a factory reset then?
Thanks a lot for the immediate response.
Eden532 said:
Nope.
I wiped system, data, cache and dalvik cache the flashed the rom and the rebooted?
Do I have to do a factory reset then?
Thanks a lot for the immediate response.
Click to expand...
Click to collapse
Well, what you did was butter than a factory reset.
Factory reset means wiping data, cache and dalvik cache.
I would like you to do something first, try downloading the latest stock firmware for your phone from sammobile, and then flash it with Odin, then try flash AOSP roms again, maybe you have an old bootloader.
MigoMujahid said:
Well, what you did was butter than a factory reset.
Factory reset means wiping data, cache and dalvik cache.
I would like you to do something first, try downloading the latest stock firmware for your phone from sammobile, and then flash it with Odin, then try flash AOSP roms again, maybe you have an old bootloader.
Click to expand...
Click to collapse
Im running the latest firmware which id flashed through odin.
AOSP roms still not booting.
I had wiped those partitions before i flashed the rom. I did not wipe after i flashed them.
Eden532 said:
Im running the latest firmware which id flashed through odin.
AOSP roms still not booting.
I had wiped those partitions before i flashed the rom. I did not wipe after i flashed them.
Click to expand...
Click to collapse
Are you sure it's the latest one?
Did you check Sammobile.com?
The latest one was released in 1st Feb 2017.
Also please check the IMEI of your phone by typing *#06#, because if you've a problem with efs partition you may not be able to flash any AOSP Rom (happened to a friend before..he had sim working without IMEI!!)
Also what is your country code?
As stated above, check your imei is still OK then from a working stock state:
Root it.
Flash custom recovery.
Flash the custom rom twice and then wipe data/cache. Do not wipe system!.
If that doesn't work then try the above but instead of wipe data/cache do a factory reset.
Beamed in by telepathy.
MigoMujahid said:
Are you sure it's the latest one?
Did you check Sammobile.com?
The latest one was released in 1st Feb 2017.
Also please check the IMEI of your phone by typing *#06#, because if you've a problem with efs partition you may not be able to flash any AOSP Rom (happened to a friend before..he had sim working without IMEI!!)
Also what is your country code?
Click to expand...
Click to collapse
My country code is XSG but ill try flashing the THL latest version and again report.
I was trying to check my IMEI number it shows UNKNOWN APPLICATION but sim and other modem related stuff works really fine.
Is it something to do with this?
shivadow said:
As stated above, check your imei is still OK then from a working stock state:
Root it.
Flash custom recovery.
Flash the custom rom twice and then wipe data/cache. Do not wipe system!.
If that doesn't work then try the above but instead of wipe data/cache do a factory reset.
Beamed in by telepathy.
Click to expand...
Click to collapse
I did flash the custom rom twice but still no good.
(And also i checked the IMEI via a custom Sammy rom)
Eden532 said:
My country code is XSG but ill try flashing the THL latest version and again report.
I was trying to check my IMEI number it shows UNKNOWN APPLICATION but sim and other modem related stuff works really fine.
Is it something to do with this?
Click to expand...
Click to collapse
This is the latest firmware for United Arab Emirates:
https://androidfilehost.com/?fid=385035244224412750
Flash it and see if the problem solved :good:
MigoMujahid said:
This is the latest firmware for United Arab Emirates:
https://androidfilehost.com/?fid=385035244224412750
Flash it and see if the problem solved :good:
Click to expand...
Click to collapse
Thank you so much for sending the link, Its really difficult to download from sammobile.com . Ill check it right away and report. Thanks.

Categories

Resources