Sometimes touch is not responding. Is this software problem or any hardware related issue. Is Any one facing same problem on their phones.
Ya m also facing the same problem. Is there any solution?
I face this usually while charging plugged in , and sometime while playing pubg, the touch is not at all responsive for 3 or 4 seconds, very irritating phone and Colour OS , while watching movie when notification comes from WhatsApp, if we try to expand from notification bar, it expanses and gets stucks without any response again i have to turn off screen and turn back on, very irritating.
Once development starts for this device, i will remove colour os and install stock osand check if same problem occurs.
---------- Post added at 07:28 PM ---------- Previous post was at 07:27 PM ----------
Giridhar Sonu said:
Sometimes touch is not responding. Is this software problem or any hardware related issue. Is Any one facing same problem on their phones.
Click to expand...
Click to collapse
Backup all data to pc from internal storage and reset the device and see, if it still occurs, better take to service center.
Giridhar Sonu said:
Sometimes touch is not responding. Is this software problem or any hardware related issue. Is Any one facing same problem on their phones.
Click to expand...
Click to collapse
I am also facing this issue. It is not persistent but comes and goes. After switching off the display once or twice, the problem goes away.
Not sure it the problem is software related or hardware.
Related
Hello every one !
I'm french so sorry for my bas english
I encounter a problem with the proximity sensor on my phone (Mozart7).
In fact, when I issue or receives a call the screen goes black and I can not hang up or to get to the options.
Is there an application that would disable the proximity sensor?
I noticed that when you plug a headset during a call the screen turns on, ignoring the information from the sensor
If it does not exist, could someone tell me the registry keys to change to solve my problem?
Thank you in advance and good day
I've got the exact same problem, am wonderin if it might be a hardware problem.
Anyone got any advice or fixes please?
thanks.
------------
HTC Mozart WM7
UK Orange stock ROM
---------- Post added at 05:43 PM ---------- Previous post was at 05:11 PM ----------
...tried a hard reset, still behaves the same.
I had the same Issue with my Mozart 7 and im not 100% sure what fixed the problem, but it was either the removing of my protective foil, or it was flashing a new Rom. I did both in a short time and after it it worked... Have a try and good luck
K2Death said:
Hello every one !
I'm french so sorry for my bas english
I encounter a problem with the proximity sensor on my phone (Mozart7).
In fact, when I issue or receives a call the screen goes black and I can not hang up or to get to the options.
Is there an application that would disable the proximity sensor?
I noticed that when you plug a headset during a call the screen turns on, ignoring the information from the sensor
If it does not exist, could someone tell me the registry keys to change to solve my problem?
Thank you in advance and good day
Click to expand...
Click to collapse
Hello
the front of Proximity sensor may be dirty! so you should clean that from internal side of it ! so try it!
I had this problem and it was cleared!!
msadeghz said:
Hello
the front of Proximity sensor may be dirty! so you should clean that from internal side of it ! so try it!
I had this problem and it was cleared!!
Click to expand...
Click to collapse
Thanks, any clues on how I can get to the inside of it?
I tried a ROM re-flash and no difference so think it must be hardware related, but I can't see any easy eway to get to it.
So, I've re-flashed the ROM, stripped the phone and cleaned the sensor and window - still the screen turns off when I'm in a call.
Could there be a registry setting to resolve this? Any ideas?
Thanks
It has been a fortnight since I received my Ubislate 7c+. During this period the device screen has blanked out 3 times. On two occasions, the device started working after a few hours. However on the last occasion, it has not been possible to restart.
The technical support team suggested a reset and charge for 6-8 hrs either with the adapter or via USB. This has not solved the problem.
Anyone experienced this? Can someone suggest a solution.
Thanks
Did you alter anything related to the stock configuration...???
What exactly is the problem..?? It switches of or the screen just turns blank. ??
---------- Post added at 01:10 PM ---------- Previous post was at 12:59 PM ----------
Did you alter anything related to the stock configuration...???
What exactly is the problem..?? It switches of or the screen just turns blank. ??
shubhu2604 said:
Did you alter anything related to the stock configuration...???
What exactly is the problem..?? It switches of or the screen just turns blank. ??
---------- Post added at 01:10 PM ---------- Previous post was at 12:59 PM ----------
Did you alter anything related to the stock configuration...???
What exactly is the problem..?? It switches of or the screen just turns blank. ??
Click to expand...
Click to collapse
Yes, I have added some apps after I received it.
The display blanks out even when one is using it. The device appears to be ON only the display is blank. I can say this since plugging it to a laptop causes it to be recognized (ie. the OS tries to find a driver for the device).
I have tried to reset the device through the reset hole on the back without any luck.
Hi All,
I have A116, which behaving bit weird. 6 months back, while on charging, it started operating on its own, when I removed it from charging, it stopped. While on charging with that particular charger, issue was there. I changed the charger, everything was OK. Recently, on a ugly morning, I answered a call at 5 am and around 6 am I tried to make a call and found that screen is absolutely irresponsive. Sometime later it unlocked on its own, started operating on its own, like opening any random app or web or anything and does some random operation. Tried to power reset the phone half a dozen time no go, removed both SIM and memory card. still the same. This has completely wiped out my phone data (phone book, all SMS, photo, mp3's video's), factory reset in other words (on its own). I was told its battery issue, changed that too. no go. . This is happening not always, it happens for a while and then behaves normal and after 5 minutes old story repeats.
The best part it had wiped out avast anti-virus too....
Any one heard of this..? Any solution without going to service center..?
thanks,
Narendra
chouna said:
Hi All,
I have A116, which behaving bit weird. 6 months back, while on charging, it started operating on its own, when I removed it from charging, it stopped. While on charging with that particular charger, issue was there. I changed the charger, everything was OK. Recently, on a ugly morning, I answered a call at 5 am and around 6 am I tried to make a call and found that screen is absolutely irresponsive. Sometime later it unlocked on its own, started operating on its own, like opening any random app or web or anything and does some random operation. Tried to power reset the phone half a dozen time no go, removed both SIM and memory card. still the same. This has completely wiped out my phone data (phone book, all SMS, photo, mp3's video's), factory reset in other words (on its own). I was told its battery issue, changed that too. no go. . This is happening not always, it happens for a while and then behaves normal and after 5 minutes old story repeats.
The best part it had wiped out avast anti-virus too....
Any one heard of this..? Any solution without going to service center..?
thanks,
Narendra
Click to expand...
Click to collapse
Try with flashing stock rom again.
Sent from my Micromax P650 using XDA Premium 4 mobile app
chouna said:
Hi All,
I have A116, which behaving bit weird. 6 months back, while on charging, it started operating on its own, when I removed it from charging, it stopped. While on charging with that particular charger, issue was there. I changed the charger, everything was OK. Recently, on a ugly morning, I answered a call at 5 am and around 6 am I tried to make a call and found that screen is absolutely irresponsive. Sometime later it unlocked on its own, started operating on its own, like opening any random app or web or anything and does some random operation. Tried to power reset the phone half a dozen time no go, removed both SIM and memory card. still the same. This has completely wiped out my phone data (phone book, all SMS, photo, mp3's video's), factory reset in other words (on its own). I was told its battery issue, changed that too. no go. . This is happening not always, it happens for a while and then behaves normal and after 5 minutes old story repeats.
The best part it had wiped out avast anti-virus too....
Any one heard of this..? Any solution without going to service center..?
thanks,
Narendra
Click to expand...
Click to collapse
Thats a big problem i think you have installed some malicious app with root permission or this is the problem with your TP. I think there might have been a problem while your TP would have been updated.
Solution:-
1. Go to micromax service center and tell them ur problem.
2. Try to flash stock rom again with sp flash tools.
3. If you are already on 4.1 than update to 4.2 else do vice versa.
Important:-TP means Touch Panel
My solution will definately help you :good:
rajneeshk said:
Try with flashing stock rom again.
Sent from my Micromax P650 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi Rakesh, let me try to do this. This is first ever i am trying to do.. hopefully this will fix the issue.
princechandela said:
Thats a big problem i think you have installed some malicious app with root permission or this is the problem with your TP. I think there might have been a problem while your TP would have been updated.
Solution:-
1. Go to micromax service center and tell them ur problem.
2. Try to flash stock rom again with sp flash tools.
3. If you are already on 4.1 than update to 4.2 else do vice versa.
Important:-TP means Touch Panel
My solution will definately help you :good:
Click to expand...
Click to collapse
HI, i just hated to go to their service center. so checking any option. will try to flash the rom..in-between by screen is broken as well.
Can i upgrade the OS too..? please advise.
chouna said:
HI, i just hated to go to their service center. so checking any option. will try to flash the rom..in-between by screen is broken as well.
Can i upgrade the OS too..? please advise.
Click to expand...
Click to collapse
the problem you are reporting is common in most canvas phones with older firmware. update the firmware
---------- Post added at 03:55 PM ---------- Previous post was at 03:20 PM ----------
it's easy. check this out.
http://forum.xda-developers.com/showthread.php?t=2292971
use factory reset to flash the new firmware. (you can root and install recovery if you want)
I faced a similar problem some time back.
I visited the service center in Azadpur(or nearby Azadpur Metro station, do not remember the exact address) and they fixed it in 30 minutes of wait time. Try visiting their service center..I had stock ROM back then though..!!
High Voltage
when u get high voltage in your supply....
it happens like this.......
no need to flash again......
praveenganesan said:
when u get high voltage in your supply....
it happens like this.......
no need to flash again......
Click to expand...
Click to collapse
BhatiaPulkit said:
I faced a similar problem some time back.
I visited the service center in Azadpur(or nearby Azadpur Metro station, do not remember the exact address) and they fixed it in 30 minutes of wait time. Try visiting their service center..I had stock ROM back then though..!!
Click to expand...
Click to collapse
you got the same old stock firmware alright. but it's the newer one. Micromax has updated their stock rom many times since android 4.1
v1 - Android 4.1.2 Initial version. Lots of bugs. You could install Flipboard app and see the entire device bricked.
v2 - Android 4.1.2 Update. Flipboard bug fixed. Yet there was another issue, which caused the touch pad to malfunction while charging. other bugs include the app storage issue. you can't install apps in external sd card and storage space was very small.
v3 - Android 4.2.1. TouchPad issue was fixed. Apps can be installed on external sd card. OTA firmware update support was added but it doesn't work.
v4 - Android 4.2.1 Update - New Camera App. OTA issue was never fixed.
v5 - the newest firmware from micromax which was launched with Micromax A116i. No bugs so far.
Micromax service center must have updated your firmware to Android 4.2.1. version 3
Ur problem was because of charging...
Voltage problem not a software problem...
Use ur own charger without any extension or any external supply...
U will not face any issue like this...
Sent from my Samsung Galaxy S4 Mini GT-I9505 using xda app-developers app
Hi all,
Been struggling with this for the last days.
I have a Samsung Galaxy S3, Rooted, with CM11 for i9300 (nightly).
Everything seems to work properly except for the Proximity Sensor.
When I make calls the screen will go black and won't recover.
Proximity Sensor Finder always show 0.0 cm as if objects are constantly near.
These are the things I tried so far, with no luck:
1. Opening the device and cleaning the sensor.
2. Creating a bolder separation between the two receptors of the sensor.
3. Running Auto Calibration
4. Running Manual Calibration returns:
Code:
$ cat state #finger on the sensor to test if the sensor is working properly
0
$ cat state #blank value
0
Code:
$ cat prox_cal
0,15
Which means my 'new' calibration adds up to '0' which makes no sense (is it?)
What else would you suggest? This is really frustrating
Any ideas???
Please give me something
I am also having this issue on my girlfriends T-Mobile s3 (d2lte i think) on CM11 M7-M9. Just now starting to investigate, but I will report back here if I find anything
---------- Post added at 09:42 AM ---------- Previous post was at 08:47 AM ----------
This app fixed it for me (while others that claimed they should did not). Check it out:
https://play.google.com/store/apps/details?id=it.iiizio.screenwakeup&hl=en
Thanks but...
thefanum said:
I am also having this issue on my girlfriends T-Mobile s3 (d2lte i think) on CM11 M7-M9. Just now starting to investigate, but I will report back here if I find anything
---------- Post added at 09:42 AM ---------- Previous post was at 08:47 AM ----------
This app fixed it for me (while others that claimed they should did not). Check it out:
Click to expand...
Click to collapse
Thanks but this is not really a solution.
I don't want to use an app, I want to fix the proximity sensor issue.
Any other ideas?
The point is, it was not a problem with the proximity sensor. It was a bug. Try the app, if it works, you proximity sensor is fine.
Xolusia said:
Thanks but this is not really a solution.
I don't want to use an app, I want to fix the proximity sensor issue.
Any other ideas?
Click to expand...
Click to collapse
What settings?
thefanum said:
The point is, it was not a problem with the proximity sensor. It was a bug. Try the app, if it works, you proximity sensor is fine.
Click to expand...
Click to collapse
What settings in the app did you use to test it?
Enable screen wake up, restart on startup, auto lock screen, auto wake up, 2 second time out and status bar icon.
Sent from my SM-N900T using XDA Free mobile app
Update...
I tried flashing my CWM again and downgrading the CM rom to a stable version (10.2).
Still same problem.
What else can I do? The previous user of this phone said there was no problem (he used the stock rom).
I don't want to install a third party app to "fix" it.
I need a decent solution and a functioning proximity sensor.
You can install the app temporarily, to find out if it is a hardware problem or not. No one can help you until you fully diagnose it and find the source of the problem.
Sent from my SM-N900T using XDA Free mobile app
Solved it:
http://forum.xda-developers.com/galaxy-s3/help/fixed-proximity-sensor-manual-t2930556
could you anyone advise why camera starts lagging after using it for 15-20mins.. Also i got overheating warning and post which device went off. EMUI 9. Anyone facing this issue ? is there a way to fix it. I tried resetting camera app and the phone as well...