somebody please help me sixaxis controller app doesn't working on poco f1 miui 10 android 9. 10.2.2.0 Global Stable.
Quick Start:
- Pair controllers via USB using supplied utility
- Use 'start' and 'stop' to toggle driver
- Press power button on controllers to activate
- Change input method to 'Sixaxis Controller'
- Check 'help' menu for detailed instructions
Getting bluetooth address...
Attempting connection method 1...
Driver Starting...
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 2...
Driver Starting...
Wrong number of ports were opened
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 3...
Driver Starting...
Could not load bluetooth library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 4...
Driver Starting...
Could not load bluetooth library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 5...
Driver Starting...
Could not load HCI library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 6...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 7...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Attempting to close server...
Restoring previous bluetooth state...
Disconnected
1. I have twrp recovery
2. I have magisk
3. I can install xposed module too
Please somebody provide a solution.
UPDATE
Finally i found a way to make it work
special thanks to :
1. hadyanadli (for uploading this video on youtube and for providing important information) youtube link
2. luisrosales0130 (for the youtube link)
if anyone want to try it, can follow below instructions
requirements :
1. miui 10 v10.0.6.0 global stable (oreo) download from here (thanks to happybuddhist for providing this useful thread)
2. magisk 17.2 (for installing magisk follow this guide check here
3. selinux manager (a magisk module download from here) (again thanks to hadyanadli for this thread link) also thanks to jman420 (for providing us this module)
i hope above requirements enough to make it work. :good:
Hulk555 said:
somebody please help me sixaxis controller app doesn't working on poco f1 miui 10 android 9. 10.2.2.0 Global Stable.
Quick Start:
- Pair controllers via USB using supplied utility
- Use 'start' and 'stop' to toggle driver
- Press power button on controllers to activate
- Change input method to 'Sixaxis Controller'
- Check 'help' menu for detailed instructions
Getting bluetooth address...
Attempting connection method 1...
Driver Starting...
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 2...
Driver Starting...
Wrong number of ports were opened
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 3...
Driver Starting...
Could not load bluetooth library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 4...
Driver Starting...
Could not load bluetooth library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 5...
Driver Starting...
Could not load HCI library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 6...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 7...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Attempting to close server...
Restoring previous bluetooth state...
Disconnected
Click to expand...
Click to collapse
Yeah it didn't work for me too. I ended up finding this app called tincore key mapper and it maps touches to key presses (gamepad/ keyboard etc) but I think it required SE Linux set to permissive. It did work but I couldn't set it up correctly.
You should try it maybe you can get it working correctly. Search it on play store.
MasterFURQAN said:
Yeah it didn't work for me too. I ended up finding this app called tincore key mapper and it maps touches to key presses (gamepad/ keyboard etc) but I think it required SE Linux set to permissive. It did work but I couldn't set it up correctly.
You should try it maybe you can get it working correctly. Search it on play store.
Click to expand...
Click to collapse
but i also need to connect my dual shock 3 controller
Hulk555 said:
but i also need to connect my dual shock 3 controller
Click to expand...
Click to collapse
It worked for xinput and dinput controllers. You can try if it works for dual shock. It is free on play store.
Change your selinux to permissive.
there's a magisk modul to do so (module)
that did the trick for me.
sad that the dev doesnt maintain the app anymore. it works very well even for playing PUBG M
hadyanadli said:
Change your selinux to permissive.
there's a magisk modul to do so (module)
that did the trick for me.
sad that the dev doesnt maintain the app anymore. it works very well even for playing PUBG M
Click to expand...
Click to collapse
still facing the same issue. sixaxis showing the same log details.
MasterFURQAN said:
It worked for xinput and dinput controllers. You can try if it works for dual shock. It is free on play store.
Click to expand...
Click to collapse
i tried no luck
hadyanadli said:
Change your selinux to permissive.
there's a magisk modul to do so (module)
that did the trick for me.
sad that the dev doesnt maintain the app anymore. it works very well even for playing PUBG M
Click to expand...
Click to collapse
Are you saying that the app didn't even respond to the controller ? In that case did you set SE Linux to permissive ?
Sixaxis software is not a guarantee on android versions after December 2016. Last update of that software is Dec 2016 and no support or update after that.
smdc19812011 said:
Sixaxis software is not a guarantee on android versions after December 2016. Last update of that software is Dec 2016 and no support or update after that.
Click to expand...
Click to collapse
sure but many phones are supporting it even on 8.1 not confirm for 9. but as i said i have magisk n xposed to do necessary changes so may be it is possible to make this app work.
Hulk555 said:
sure but many phones are supporting it even on 8.1 not confirm for 9. but as i said i have magisk n xposed to do necessary changes so may be it is possible to make this app work.
Click to expand...
Click to collapse
That's why I said "not a guarantee".
smdc19812011 said:
That's why I said "not a guarantee".
Click to expand...
Click to collapse
confirmed on pie too check here
This guy is using Sixaxis but don't know What ROM he is using he is playing with poco
luisrosales0130 said:
This guy is using Sixaxis but don't know What ROM he is using he is playing with poco
Click to expand...
Click to collapse
thanks for the info i am trying to communicate with that person.
I made it work even with Global stable 10.0.6.0.
failed to connect without Selinux Permissive, but once i flashed it everything went well.
the connection is stable as well.
the issue i was having is severe battery drain after disconnection.
it's common issue with the app
hadyanadli said:
I made it work even with Global stable 10.0.6.0.
failed to connect without Selinux Permissive, but once i flashed it everything went well.
the connection is stable as well.
the issue i was having is severe battery drain after disconnection.
it's common issue with the app
Click to expand...
Click to collapse
Can you tell me which ROM you are using currently? To use sixaxis
Im using rr remix oreo with selinux permisive and sixaxis working good
Hulk555 said:
Can you tell me which ROM you are using currently? To use sixaxis
Click to expand...
Click to collapse
Global stable 10.0.6.0.
MIUI.eu
lineage 15 and 16 should work well too
What about stock 10.2.2 ? Is it working?
hadyanadli said:
Global stable 10.0.6.0.
MIUI.eu
lineage 15 and 16 should work well too
Click to expand...
Click to collapse
Facing battery drain fast issue on v10.0.6.0 (miui 10 Oreo global stable) after disconnection of sixaxis with PS3 controller.
Related
ive tried to get it to work on my rooted smasung galxy s2 tmobile but wont give me the bluetooth address
http://www.dancingpixelstudios.com/contact.html
Have a problem?
Don't forget to check the FAQ for answers to the most commonly asked questions.
Email
Please send all support emails, feature requests & general enquiries to [email protected]
artojeda1988 said:
ive tried to get it to work on my rooted smasung galxy s2 tmobile but wont give me the bluetooth address
Click to expand...
Click to collapse
1.First off install Sixaxis Controller Checker app from market
2.Run it and after some errors and saying your phone is compatible it should give
you an adress - write it down
3.Install Sixaxis Pair Tool (SPT in further text) from dancing pixel studios website
4.Connect your PS3 controller via usb you got with your PS3
5.Wait until the drivers install
6.SPT will show your current bluetooth master adress - WRITE it down ( so you
can restore it when you want to use it with your PS3)
7.Enter a new adress ( the one you got in step 2) - disconnect after this
8.Install Sixaxis Controller app and run it
9.Turn on your controller
10. It should now connect, the only thing remaining is to change default input to
PS3 controller in settings
11.Thats it!
The t-mobile version has issues with the current version of the app. I have a fix for this which should be up within a week.
Any idea why, when using 'Bluetooth File Transfer', I can't get the FTP OPP to start up? Something about Threadpool and address already in use? I also have the enigmatic failed bluetooth peripheral device driver fail to instal on my Win7 64bit laptop. I'm willing to explore all suggestions.
Sent from my DROID RAZR using Tapatalk 2
Einsteindks said:
Any idea why, when using 'Bluetooth File Transfer', I can't get the FTP OPP to start up? Something about Threadpool and address already in use? I also have the enigmatic failed bluetooth peripheral device driver fail to instal on my Win7 64bit laptop. I'm willing to explore all suggestions.
Sent from my DROID RAZR using Tapatalk 2
Click to expand...
Click to collapse
I'm here with the same problem.It said "address already in use".
Changing the Bluetooth address can fix it???
I remember I had this problem too, until I installed a file transfer over bluetooth app.
don't remember its name as I am many months on MeeGo now, but it was first or second in the app market (free)
Give Astro Bluetooth Module a shot. That fixed the problem for me.
Hey,I found temporary solution to fix OPP error of bluetooth file transfer.
1.Go to System settings.
2.Turn ON Bluetooth.
3.Go to Manage apps> Running tab (you'll see some running process).
4.Among them,find "Bluetooth share" and click it.
5.You'll see "BluetoothOppService",click stop>OK.
6.Open bluetooth file transfer,its OPP service will start successfully.
Whenever you restart bluetooth, you need to redo step 5.
I've never between able to Bluetooth transfer files on any Android phone I've had. I would love to be able to do it.
Sent from my Maxxed Out Razr!
tharpu said:
Hey,I found temporary solution to fix OPP error of bluetooth file transfer.
1.Go to System settings.
2.Turn ON Bluetooth.
3.Go to Manage apps> Running tab (you'll see some running process).
4.Among them,find "Bluetooth share" and click it.
5.You'll see "BluetoothOppService",click stop>OK.
6.Open bluetooth file transfer,its OPP service will start successfully.
Whenever you restart bluetooth, you need to redo step 5.
Click to expand...
Click to collapse
wow you rock...
its work tnx...
Hello, first time in the forum. Today I rooted my OP3 and one of the bigest reasons was sixaxis controller to configure PS4 controller on it. But i've tried and it gives the following message:
Getting bluetooth address...
Attempting connection method 1 ...
Driver Starting...
Error: Failed to configure bluetooth
Getting bluetooth adress...
Attempting connection method 2...
Driver Starting...
Wrong number of ports were opened
Error; Failed to configure bluetooth
Getting bluetooth address...
and it freeze there.
If anyone could give me a solution to this i will be very thankful
Same Here. Since i updated to Oreo Theres No Option to activate Sixaxis and the Same Error Codes Show Up. I tried to Change the Bluetooth options in the Development settings And still No luck. Im pretty Sure this is a bug of the Software and when Oreo 8.1 comes Out for Oneplus it should be fixed.
Hey guys, please let me know if you managed to fix the sixaxis on oreo. I've installed the updete on my OP5T, wiped the system cache and tried to pair the DS3 with no luck. I was using Super Su so far yet this time i decided to go with magisk (i don't know if it makes any difference). in my case there is no freeze. The app goes through all the available methods where on nougat it performed the first method and i was good to go. I am considering downgrading to nougat for now.
Here is the log from the app:
Quick Start:
- Pair controllers via USB using supplied utility
- Use 'start' and 'stop' to toggle driver
- Press power button on controllers to activate
- Change input method to 'Sixaxis Controller'
- Check 'help' menu for detailed instructions
Getting bluetooth address...
Attempting connection method 1...
Driver Starting...
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 2...
Driver Starting...
Wrong number of ports were opened
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 3...
Driver Starting...
Could not find stack manager interface in library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 4...
Driver Starting...
Could not load bluetooth library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 5...
Driver Starting...
Could not load HCI library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 6...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 7...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Attempting to close server...
Restoring previous bluetooth state...
Disconnected
Yep I know how to fix this Problem but it is going to annoy Most of The people. The Problem ist The Software. (Not sure If only one plus) but The Android Version 8.0 has issues with Bluetooth. I realised IT after Installing a different Rom (Android 8.1) and Sixaxis Works fine there. So The solution would ne to install a Different Android Version. Didnt find any Other fixes yet
Fix
There is no settlement, all just talk a lot. Hate with this situation . Dog
somebody please provide a solution for poco f1
There is this app called Sixaxis Controller developed by Dancing Pixel Studios which enables bluetooth drivers to connect Sony Playstations DS3 and DS4 controller on android , however the developer stoped working on the project and the app doesn't work beyond Nougat, it doesn't work on Oreo and Pie , I tried to test it on stock oreo on my LG V30+ as well as every single Rom available for V30 including pie , and it doesn't work, the app requires root access, I already bought the app from playstore, I used latest version of magisk , when I press start button it produces the output below
Code:
Quick Start:
- Pair controllers via USB using supplied utility
- Use 'start' and 'stop' to toggle driver
- Press power button on controllers to activate
- Change input method to 'Sixaxis Controller'
- Check 'help' menu for detailed instructions
Getting bluetooth address...
Attempting connection method 1...
Driver Starting...
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 2...
Driver Starting...
Wrong number of ports were opened
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 3...
Driver Starting...
Could not find stack manager interface in library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 4...
Driver Starting...
Could not load bluetooth library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 5...
Driver Starting...
Could not load HCI library
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 6...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Getting bluetooth address...
Attempting connection method 7...
Driver Starting...
Could not set HCI raw mode
Error: Failed to configure bluetooth
Attempting to close server...
Restoring previous bluetooth state...
Disconnected
I searched a lot on xda to find a solution but came up empty, and there is a lot of people who have the same issue with varoius devices and it stops working on oreo and up,
I read somewhere that the Kernel needs to support it , I believe it is an HCI library related issue or something like that, since the dev is no longer around I'm trying to find a solution myself
so please @zacharias.maladroit can you help me out here, I appreciate any help. , BTW I tried every single kernel available for V30 and it doesn't work.
HCI raw seems to circumvent the OS, also utilizing hciattach (?) to achieve things https://www.systutorials.com/docs/linux/man/1-hciattach/
not sure what kind of custom ROM or code changes are needed to get it working: https://forum.xda-developers.com/showpost.php?p=34915519&postcount=1169
Thanks anyway , I tested every single rom outthere for V30, I wish there was some patch for the kernel, I searched a lot but didn't find anything useful
@zacharias.maladroit this what I found from this post
I thinks it restores hciattach function do you know someone who can help with this , I appreciate any input.
I realize you asked about the sixaxis, but I just wanted to let you and everyone who may be reading this that I used to use a sixaxis and that app a lot on an older phone. I have not been doing much gaming lately but just last night I was playing around with some emulators and screen mirror casting to a Chromecast.
A friend commented (while holding a PS4 controller) that it was neat, but the touchscreen controls would ruin the experience. "It'd be great if this (PS4 controller) worked on Android."
Well, I got curious and put the controller into pairing mode, then searched for Bluetooth devices on my V30. I was pretty surprised that it was on the list of devices. I was even more surprised when it paired to the phone. I was then shocked/amazed to see that it actually worked as an input device just like the sixaxis app used to!
There was no extra middleman app needed, it worked out of the box. I was able to go into my emulators apps and map the buttons to the controller buttons very easily.
TL;DR
PS4 controller works natively on Android 8.0
.
Sent from my LG-LS998 using XDA Labs
Just wanted to check in and see if you ever got any traction with this?
i am facing same problem can anyone tell me how this app can work on rooted poco f1
Can we start a bounty for a developer to make this work again?
until now any news? or keep hoping?
oldman20 said:
until now any news? or keep hoping?
Click to expand...
Click to collapse
Keep hoping
Honestly I have no hope about this
hi frend, i hava a solution at miui 10 8.11.22 android 8.0(device xiao mi 5),maybe any android 8 rom,but fail at pixelexperience android 10 (device xiao mi 5) rom. I still search any way to solve it.
1. root your android device
2.console or adb shell to root user
3.cmd exec "setenforce 0" to disable selinux,
4.back to retry Sixaxis Controller 1.1.3(last version) start service,it will work.
ps:selinux will restore after reboot device,you need disable selinux again.
softworms said:
hi frend, i hava a solution at miui 10 8.11.22 android 8.0(device xiao mi 5),maybe any android 8 rom,but fail at pixelexperience android 10 (device xiao mi 5) rom. I still search any way to solve it.
1. root your android device
2.console or adb shell to root user
3.cmd exec "setenforce 0" to disable selinux,
4.back to retry Sixaxis Controller 1.1.3(last version) start service,it will work.
ps:selinux will restore after reboot device,you need disable selinux again.
Click to expand...
Click to collapse
Thanks, I will try this definitely.
Did this work also will this work on android 10?
Bronnel said:
Thanks, I will try this definitely.
Click to expand...
Click to collapse
GXDA3 said:
Did this work also will this work on android 10?
Click to expand...
Click to collapse
my device is currently not rooted , but I tried this on an Android 10 rom and it worked , it was rooted BTW.
Sorry if I'm uninformed, but I spent a few days looking for a method to root the infamous multilaser m7. A tablet with a very bad performance to install a virtual machine and at the same time super complicated in terms of compatible tools to improve its android 9. Has anyone experienced this problem, have any tips besides advising me to burn it or play In the trash?
My final objective is get remote access in this tablet without confirmation... none of most usable tools (Airdroid, Anydesk, teamviewer) work in this tablet without confirmation ou USB temporary confirmation every time the devise turn off or the tool updated. In respect of this last thing, I know that here isn't the best place to ask, but all help is welcomed.
Tablet Multilaser M7 3G Plus NB304 16GB 7” - 3G Wi-Fi Android 8.0 Quad Core
criph said:
My final objective is get remote access in this tablet without confirmation... none of most usable tools (Airdroid, Anydesk, teamviewer) work in this tablet without confirmation ou USB temporary confirmation every time the devise turn off or the tool updated.
Click to expand...
Click to collapse
AFAIK the 3 mentioned apps make use of a Wi-Fi connection and not of a USB connection. Once you are going to establish a remote connection this must be confirmed, will say the appropriate connection ID must get input.
jwoegerbauer said:
AFAIK the 3 mentioned apps make use of a Wi-Fi connection and not of a USB connection. Once you are going to establish a remote connection this must be confirmed, will say the appropriate connection ID must get input.
Click to expand...
Click to collapse
I agree ... they use wi-fi connection, thanks to God for that ... what I said is that I need to connect to the tablet without confirmation, I need to leave the tablet in my store and just upload and configure it remotely. For this, even installing the Teamviewer and AnyDesk plugins, and activating the direct connection option of Airdroid using USB without root, it is still not possible to maintain a connection with that tablet (mind cracker multilaser m7). Better options for example using Airdroid would be possible if it were possible to root this infamous.
@criph
Because tablet is powered by Mediatek chipset you can try to flash a pre-rooted Android ( Custom ROM ) by means of SP Flash Tool or do it the hard way by flashing a Custom Recovery ( e.g. TWRP ), then flashing Magisk framework via TWRP and finally root Andoid by means of Magisk Manager.
criph said:
My final objective is get remote access in this tablet without confirmation...
Click to expand...
Click to collapse
Don't know if you're still interested.
Using App Ops you may grant Anydesk or whatever the ability to always accept external connections.
To enable App Ops on a device without root, you will also need Shizuku. Follow the instructions on the screen.