Related
Hello.
I have a motorola atrix 4g AT&T Gingerbread 2.3.6.
Yesterday a received a new notification about a new upgrade. so i acepted.
then the phone turned off and i received this message.
failed to boot 1
When i push vol+ and power i read this
failed to boot 1
PwrReason: Usb_cable
Starting Fastboot Protocol.
when i push vol- and power i can read starting NVflash but the phone turn off after 1 second.
if i connect the phone to my pc, it don´t recognise.
Any help???
Cheers from Colombia. :good:
Your phone is hard bricked. Only warranty service from Motorola will solve it.
saiftheboss7 said:
Your phone is hard bricked. Only warranty service from Motorola will solve it.
Click to expand...
Click to collapse
I would try 236 sbf first rsd.first maybe install did not take seen that in mine before.
Is your phone unlocked?
thanks
diegotalla said:
Is your phone unlocked?
Click to expand...
Click to collapse
Hello.
My phone isn´t unlocked. :crying:
Povelio said:
Hello.
My phone isn´t unlocked. :crying:
Click to expand...
Click to collapse
try pressing Vol+ and power. If it says "starting RDS protocol" you are not so unlucky. Connect the phone (in RDS mode) to the pc and start the windows application called RDS Lite v5.6 or 5.7 (I tested these). Then your phone will be recognised by RDS Lite and you'll be able to flash a full sbf (full image of the complete system - like a factory reset). You can find your correct sbf from here: http://www.das8nt.com/sbffiles.html
hope to help
thanks
Thanks alberto88a
I can´t go into RSD only flashboot protocol support.
That´s very werid cause was an "official update"
I´m thinking in run a virtual machine with ubuntu and try to plug it. Then try to run a fruitcake :cyclops:
R: Failed to boot 1. Please help me!
Povelio said:
Thanks alberto88a
I can´t go into RSD only flashboot protocol support.
That´s very werid cause was an "official update"
I´m thinking in run a virtual machine with ubuntu and try to plug it. Then try to run a fruitcake :cyclops:
Click to expand...
Click to collapse
I used fastboot under windows...search for fastboot.exe and run it from a terminal ms-dos..
Sent from my MB860 using xda premium
alberto88a said:
I used fastboot under windows...search for fastboot.exe and run it from a terminal ms-dos..
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
when i do that the ms-dos said "waiting for the device" i installed all the drivers and i run it on win 7, win 8 and win xp. Thats i´m trying with ubuntu no drivers need for mount a device.
I´m very bored without an smartphone lol
Your phone is not hardbricked. Rsd recognise your device you will flash with the same firmware you have after the problem. If that not resollve your problem you need to flash the unlock sbf via rsd. Again using rsd lite flash the sbf original you have after the failed to bot 1. If the failed to boot 1 still there you need to flash via rsd the unlock sbf.
R: Failed to boot 1. Please help me!
Povelio said:
when i do that the ms-dos said "waiting for the device" i installed all the drivers and i run it on win 7, win 8 and win xp. Thats i´m trying with ubuntu no drivers need for mount a device.
I´m very bored without an smartphone lol
Click to expand...
Click to collapse
Are you sure the device is connected in fastboot mode? Try fastboot devices before other operations...anyway if the phone goes into fastboot mode you are safe! It's just a driver problem! Keep me updated
Sent from my MB860 using xda premium
Thanks
diegotalla said:
Your phone is not hardbricked. Rsd recognise your device you will flash with the same firmware you have after the problem. If that not resollve your problem you need to flash the unlock sbf via rsd. Again using rsd lite flash the sbf original you have after the failed to bot 1. If the failed to boot 1 still there you need to flash via rsd the unlock sbf.
Click to expand...
Click to collapse
Thanks diego. My pc can\t recognize the phone, thats the problem and i dowloaded the drives from motorola.:crying:
thanks
alberto88a said:
Are you sure the device is connected in fastboot mode? Try fastboot devices before other operations...anyway if the phone goes into fastboot mode you are safe! It's just a driver problem! Keep me updated
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
i only have 1 option "starting fastboot protocol support" i downloaded a million of drivers but nothing work. :crying: :crying:
Povelio said:
i only have 1 option "starting fastboot protocol support" i downloaded a million of drivers but nothing work. :crying: :crying:
Click to expand...
Click to collapse
try these drivers: http://dottech.org/downloads/MotoHelper_2.1.32_Driver_5.4.0.exe
then if you succeed try moto-fastboot http://forum.xda-developers.com/showthread.php?t=1138092
thanks
alberto88a said:
try these drivers: http://dottech.org/downloads/MotoHelper_2.1.32_Driver_5.4.0.exe
then if you succeed try moto-fastboot http://forum.xda-developers.com/showthread.php?t=1138092
Click to expand...
Click to collapse
Thanks alberto88a. Infortunatly the pc don´t recongnized. In a couple of hours i´ll try on win 8 whit this driver. I really aprecciated your help.:highfive:
R: Failed to boot 1. Please help me!
Povelio said:
Thanks alberto88a. Infortunatly the pc don´t recongnized. In a couple of hours i´ll try on win 8 whit this driver. I really aprecciated your help.:highfive:
Click to expand...
Click to collapse
Try an other pc or maybe an other usb port...don't you hear any sound while connecting? If yes your phone is at least seen by the pc and you can try to install missing drivers from control panel
Sent from my MB860 using xda premium
thanks
alberto88a said:
Try an other pc or maybe an other usb port...don't you hear any sound while connecting? If yes your phone is at least seen by the pc and you can try to install missing drivers from control panel
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Only on Win xp i got the sound. (in then out sound). It´s a very weird situation cause i downloaded the latest drivers
Povelio said:
Only on Win xp i got the sound. (in then out sound). It´s a very weird situation cause i downloaded the latest drivers
Click to expand...
Click to collapse
maybe you need to search your device and install drivers manually from control panel and "hardware". I think it's only this driver problem that keep you from flashing a full rom...
thanks
alberto88a said:
maybe you need to search your device and install drivers manually from control panel and "hardware". I think it's only this driver problem that keep you from flashing a full rom...
Click to expand...
Click to collapse
Well i think the usb port is damaged, i used 6 differents pc without results:crying:
Thanks To All
Thanks to all guys for the help, finally i change the phone for a motorola photon, a guy said that he can make a special cable to repair. So moderator you can close this. THANKS TO ALL FROM CALI-COLOMBIA.:good::good::highfive:
i have two xt910 phones one is Razr and other is Razr maxx
i use bmm in razr and i formating my system for install pacrom after restart my phone dosent boot !!
i go to ap fastboot than i conected to rsd lite than i see rsdlite dosent know my phone !!!
i coneccted my razr maxx and everthing was ok
so how to fix my razr ?
s27moto said:
i have two xt910 phones one is Razr and other is Razr maxx
i use bmm in razr and i formating my system for install pacrom after restart my phone dosent boot !!
i go to ap fastboot than i conected to rsd lite than i see rsdlite dosent know my phone !!!
i coneccted my razr maxx and everthing was ok
so how to fix my razr ?
Click to expand...
Click to collapse
What Operating System Are You Using On Your Computer?
It's strange that one has a problem, and the other does not. I understand that RSDlite not recognizing the phone is an issue, but is flashing the sbf necessary? Can you not access BMM? Does it boot directly to Fastboot mode? Or does the bootloader loop?
Regardless, I know that you aren't asking for help with the phone not booting. The problem is you cannot flash via RSD since it doesn't recognize the Razr. When you say the Razr Maxx was alright, did you boot into fastboot and RSD recognized it, or did you plug it in with the OS running, and your computer recognized it? Have you installed Motorola Device Manager?
LuckiestNut419 said:
It's strange that one has a problem, and the other does not. I understand that RSDlite not recognizing the phone is an issue, but is flashing the sbf necessary? Can you not access BMM? Does it boot directly to Fastboot mode? Or does the bootloader loop?
Regardless, I know that you aren't asking for help with the phone not booting. The problem is you cannot flash via RSD since it doesn't recognize the Razr. When you say the Razr Maxx was alright, did you boot into fastboot and RSD recognized it, or did you plug it in with the OS running, and your computer recognized it? Have you installed Motorola Device Manager?
Click to expand...
Click to collapse
I Was Having A Similar Problem This Morning. I Was Trying To Connect To RSD With Windows 8 And Couldn't. I Tried On My Desktop Which Had Windows 7 And It Worked No Problem
LuckiestNut419 said:
It's strange that one has a problem, and the other does not. I understand that RSDlite not recognizing the phone is an issue, but is flashing the sbf necessary? Can you not access BMM? Does it boot directly to Fastboot mode? Or does the bootloader loop?
Regardless, I know that you aren't asking for help with the phone not booting. The problem is you cannot flash via RSD since it doesn't recognize the Razr. When you say the Razr Maxx was alright, did you boot into fastboot and RSD recognized it, or did you plug it in with the OS running, and your computer recognized it? Have you installed Motorola Device Manager?
Click to expand...
Click to collapse
no bmm and ss recovery , i can go to boot options but only bp mode rsd know my phone in ap mode dosent know my phone
i install device manager by motorola on windows 7
some one told me find XT910RazrUtilityLITE.zip but i only can find for xt912 !!!
Try another USB port and USB cable
Sent from my XT910 using xda app-developers app
http://forum.xda-developers.com/showthread.php?p=39110351 that didn't help me but its relevant and might help you.
Sent from my DROID RAZR using xda app-developers app
I have installed the adb and fastboot, installed the motorola drivers and connected my phone to my pc. My phone is detected when it's just on but not when it's in fastboot. I know it's not much information but that's really all the information, feel free to ask questions if needed. Thanks
Vision919 said:
I have installed the adb and fastboot, installed the motorola drivers and connected my phone to my pc. My phone is detected when it's just on but not when it's in fastboot. I know it's not much information but that's really all the information, feel free to ask questions if needed. Thanks
Click to expand...
Click to collapse
What does the fastboot screen say?
This is what it looks like. This is just a photo I found in the internet, I think this is what you mean I'm assuming.
Vision919 said:
This is what it looks like. This is just a photo I found in the internet, I think this is what you mean I'm assuming.
Click to expand...
Click to collapse
I would like to know what the text on lower half says
I had this exact issue, adb worked properly when phone was on, and in fastbootd as well but in regular fastboot the phone wasn't detected at all, turned out the issue was the usb-c cable I was using, so be sure to try another one if you have it already, but before you go out and buy an extra usb-c cable check if there's any warnings about the driver in your device manager, I hear that's also a possible cause.
bajarba said:
I had this exact issue, adb worked properly when phone was on, and in fastbootd as well but in regular fastboot the phone wasn't detected at all, turned out the issue was the usb-c cable I was using, so be sure to try another one if you have it already, but before you go out and buy an extra usb-c cable check if there's any warnings about the driver in your device manager, I hear that's also a possible cause.
Click to expand...
Click to collapse
There are none, it just says my phone and, well, everything else seems normal. I did find out that it is not showing up in device manager when it's in fastboot, if that helps at all
sd_shadow said:
I would like to know what the text on lower half says
Click to expand...
Click to collapse
This is when it is connected to my computer.
Vision919 said:
This is when it is connected to my computer.
Click to expand...
Click to collapse
Windows 10?
Does it make a connect sound if you disconnect/reconnect USB?
sd_shadow said:
Windows 10?
Does it make a connect sound if you disconnect/reconnect USB?
Click to expand...
Click to collapse
When it is not in fastboot, yes. But when I go into fastboot mode, no it does not. Also yes, I am using Windows 10
Vision919 said:
When it is not in fastboot, yes. But when I go into fastboot mode, no it does not
Click to expand...
Click to collapse
But it must have worked, to unlock the bootloader?
sd_shadow said:
But it must have worked, to unlock the bootloader?
Click to expand...
Click to collapse
Yeah, I unlocked the bootloader about 2 months ago and got busy with something else. I started back last week. I'm not sure how/why it worked when I unlocked the bootloader but not now
Vision919 said:
Yeah, I unlocked the bootloader about 2 months ago and got busy with something else. I started back last week. I'm not sure how/why it worked when I unlocked the bootloader but not now
Click to expand...
Click to collapse
You are just trying to flash a patched boot.img, to root correct?
sd_shadow said:
You are just trying to flash a patched boot.img, to root correct?
Click to expand...
Click to collapse
Correct
Vision919 said:
Correct
Click to expand...
Click to collapse
Adb commands still work, when booted normal?
Have you tried?
Adb reboot bootloader
sd_shadow said:
Adb commands still work, when booted normal?
Have you tried?
Adb reboot bootloader
Click to expand...
Click to collapse
Yes, I have. It boots into fastboot mode once I do that. It seems adb commands work but not fastboot, but don't take my word.
Vision919 said:
Yes, I have. It boots into fastboot mode once I do that. It seems adb commands work but not fastboot, but don't take my word.
Click to expand...
Click to collapse
Do you have a different pc you can use?
sd_shadow said:
Do you have a different pc you can use?
Click to expand...
Click to collapse
Uh, maybe?
Try a different pc, and different usb cable.
sd_shadow said:
Try a different pc, and different usb cable.
Click to expand...
Click to collapse
Alright, i'll get back to you after I try
sd_shadow said:
Try a different pc, and different usb cable.
Click to expand...
Click to collapse
Can I do it without administrator privileges? The only other computer I have is my school computer, and well, it doesn't have administrator rights.
Hi, I literally f**ked up my root progress with patched boot.img.
I'm using a phone that is a clone of Panasonic Eluga x1 Pro. I decided to root it with magisk patched root.img. Simply flashed the patched img with adb using "fastboot flash boot patched_boot.img" and ran "fastboot restart" to restart it to my system, it didn't booted up since. I can't go in recovery mode, the phone is literally not giving or receiving anything.
May be your phone was bricked due to a wrong patched img
abessi sofiene said:
May be your phone was bricked due to a wrong patched img
Click to expand...
Click to collapse
Is there any chance that I can fix it?
Francislukacher said:
Is there any chance that I can fix it?
Click to expand...
Click to collapse
When you put charger is there charging animation on the screen?
abessi sofiene said:
When you put charger is there charging animation on the screen?
Click to expand...
Click to collapse
No, it doesn't show any charging animation, when I connect my phone to my PC, it shows it's a MediaTek COM Port.
good luck with edl mode
Francislukacher said:
No, it doesn't show any charging animation, when I connect my phone to my PC, it shows it's a MediaTek COM Port.
Click to expand...
Click to collapse
Try to flash again with official rom
Guan Yu said:
good luck with edl mode
Click to expand...
Click to collapse
Actually, I'm a beginner about these things, the phone runs on Helio P60, with Oreo 8.1. What can I do about that? It was my main phone..
abessi sofiene said:
Try to flash again with official rom
Click to expand...
Click to collapse
I tried that with SP Flash Tool with stock rom of course. I'm trying to plug in my phone but the SP Flash Tool don't wanna flash it, i don't know why. (I have auth and da files too)
By the way, I ran the SP Flash Tool, Format All + Download, when i plug in my phone holding VolUP, it just throws "STATUS_ERR (0xC0010001)" thing. I don't know what to do at this point.
Francislukacher said:
I tried that with SP Flash Tool with stock rom of course. I'm trying to plug in my phone but the SP Flash Tool don't wanna flash it, i don't know why. (I have auth and da files too)
Click to expand...
Click to collapse
make sure the pc recognised it , open device manager on your pc to check
Guan Yu said:
make sure the pc recognised it , open device manager on your pc to check
Click to expand...
Click to collapse
In the Device Manager on PC, it simply says "MediaTek Preloader USB VCOM (Android) (COM12)" about my phone i think.
I don't wanna be that guy but your phone is, think of a person who's alive but can't speak, move, nod, anything, for itself.
However, you may have luck, because they're still repairable, but your best bet is take it back and play dumb, they don't have the time/willingness/resources to check whether you messed with it. Went to bed, woke up, i swear, i dunno, it was like that, tsk, tsk, tsk...
Lol
Francislukacher said:
In the Device Manager on PC, it simply says "MediaTek Preloader USB VCOM (Android) (COM12)" about my phone i think.
Click to expand...
Click to collapse
enter fastboot devices , if the computer recognizes your device, flash the stock rom, otherwise try to find a way to get into edl mode on youtube until the computer recognizes your device. EDL is just a 2nd bootloader (maybe?)
culiacanazo said:
I don't wanna be that guy but your phone is, think of a person who's alive but can't speak, move, nod, anything, for itself.
However, you may have luck, because they're still repairable, but your best bet is take it back and play dumb, they don't have the time/willingness/resources to check whether you messed with it. Went to bed, woke up, i swear, i dunno, it was like that, tsk, tsk, tsk...
Lol
Click to expand...
Click to collapse
The phone is quite old actually, i don't know if they will do it.
Guan Yu said:
enter fastboot devices , if the computer recognizes your device, flash the stock rom, otherwise try to find a way to get into edl mode on youtube until the computer recognizes your device. EDL is just a 2nd bootloader (maybe?)
Click to expand...
Click to collapse
I ran "fastboot devices" on CMD screen when it connects as "MediaTek Preloader USB VCOM (Android) (COM12)", nothing is happening.
Francislukacher said:
I ran "fastboot devices" on CMD screen when it connects as "MediaTek Preloader USB VCOM (Android) (COM12)", nothing is happening.
Click to expand...
Click to collapse
so you havent entered edl
Try to disconnect battery if it is removable and connect phone to pc
Can you send a screenshot
abessi sofiene said:
Try to disconnect battery if it is removable and connect phone to pc
Can you send a screenshot
Click to expand...
Click to collapse
No, my battery is not removable. What screenshot do u wanted?
Francislukacher said:
No, my battery is not removable. What screenshot do u wanted?
Click to expand...
Click to collapse
Sp flash tool error screenshot
Hi, pretty much all the info are in the title. I reboot in fastboot but doing fastboot devices doesn't show anything.
I'm using the original cable so I don't thing that's the issue.
Any idea?
segolas said:
Hi, pretty much all the info are in the title. I reboot in fastboot but doing fastboot devices doesn't show anything.
I'm using the original cable so I don't thing that's the issue.
Any idea?
Click to expand...
Click to collapse
Which Android Version?
Chaitanya Dixit said:
Which Android Version?
Click to expand...
Click to collapse
11
segolas said:
11
Click to expand...
Click to collapse
adb devices command detected your device? And download the latest platform tools.
Do you see the fastboot mode letters on your phone with very tiny fonts?
ghost9685 said:
Do you see the fastboot mode letters on your phone with very tiny fonts?
Click to expand...
Click to collapse
Yes, can't really read it unless using another phone as a magnifier.
Chaitanya Dixit said:
adb devices command detected your device? And download the latest platform tools.
Click to expand...
Click to collapse
adb detects it fine, it's just fastboot that doesn't work
segolas said:
adb detects it fine, it's just fastboot that doesn't work
Click to expand...
Click to collapse
Are you tried another port ( USB 2 ) ?
I had same problems, rebooted, changed ports, switched Linux / Windows. Did not remember what really helped. Than flashed entire A20, which I needed for update, and no more problems ....
roldev said:
Are you tried another port ( USB 2 ) ?
I had same problems, rebooted, changed ports, switched Linux / Windows. Did not remember what really helped. Than flashed entire A20, which I needed for update, and no more problems ....
Click to expand...
Click to collapse
It's a surface pro so there's only one usb port. I'll try on my other linux laptop
segolas said:
It's a surface pro so there's only one usb port. I'll try on my other linux laptop
Click to expand...
Click to collapse
The same here
I remember that have similar problems with the ThinkPads I have. Plugin to the dock's USB 2 helped in this time.
As last resort have 12 years old Arch Linux Acer which still not fails.
segolas said:
Yes, can't really read it unless using another phone as a magnifier.
Click to expand...
Click to collapse
yeah right, i didnt even had these letter showing up and phone was not booting into fastboot mode, i mean it does and it immediately rebooted to system. So i had to roll back to Android 11 ( tedious task ) and from then i booted back to Fastboot.
segolas said:
It's a surface pro so there's only one usb port. I'll try on my other linux laptop
Click to expand...
Click to collapse
Try using a PC .. ya Linux Laptop would work great