Hi
I am trying to find any custom rom that could be flashed on my J600F device.
Long story short, there is not.
I learned (and checked) J6 is actually compatible with project treble.
Now, that i know i can flash GSI roms, i am still a bit confused if this device is ARM/ARM64.
Any clue ?
dzeron said:
Hi
I am trying to find any custom rom that could be flashed on my J600F device.
Long story short, there is not.
I learned (and checked) J6 is actually compatible with project treble.
Now, that i know i can flash GSI roms, i am still a bit confused if this device is ARM/ARM64.
Any clue ?
Click to expand...
Click to collapse
I don't know too much about the subject, but I read that you need GSI's that are ARM with ARM64 binders. Samsung likes using 64-bit chips to run in 32-bit mode lol
ShaDisNX255 said:
I don't know too much about the subject, but I read that you need GSI's that are ARM with ARM64 binders. Samsung likes using 64-bit chips to run in 32-bit mode lol
Click to expand...
Click to collapse
Thank you for the answer.
That's quite even more confusing unfortunately.
If anything comes up, like a GSI/Custom rom (i tried without any positive result) that you are sure it should work for the device.. PM me anytime
dzeron said:
Thank you for the answer.
That's quite even more confusing unfortunately.
If anything comes up, like a GSI/Custom rom (i tried without any positive result) that you are sure it should work for the device.. PM me anytime
Click to expand...
Click to collapse
On 4pda there is a working gsi
Kep1105 said:
On 4pda there is a working gsi
Click to expand...
Click to collapse
Send me the link and thank you !! :good:
dzeron said:
Send me the link and thank you !! :good:
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?s=&showtopic=908536&view=findpost&p=81620052
What's that I wanna know
Currently using Omni ROM gsi
danicadanicadanica said:
Currently using Omni ROM gsi
Click to expand...
Click to collapse
pls tell me what GSI rom did you install with complete package name of the rom, and link, thanks in advance. Hope you read my reply
For the record, the name that the GSI are adapting that are compatible with the J6 is called a64 or sometimes referred to as arm32_binder64
Not to be confused with arm64 which is completely 64 bits
So, the GSI are as follows:
arm - Not compatible with J6
arm64 - Not compatible with J6
a64 - Compatible with J6
Related
Note To Developers :
I have tried to install so many treble roms in my Galaxy J6 Infinity and always failed to install. Can any developer please provide us a full guide on how to install treble roms in samsung exynos devices using TWRP or anything else. Please help us.
I tried to install the following roms
1. OmniP-arm64_aonly_vanilla_nosu
2. PixelExperienceP-arm-aonly
3. dotOS-O-v2.4-santoni-OFFICIAL-20180723
All the above roms are treble roms and I failed to install.
My device also supports Project Treble.
Please Help:crying::crying::crying:
Nitin devarapalli said:
Note To Developers :
I have tried to install so many treble roms in my Galaxy J6 Infinity and always failed to install. Can any developer please provide us a full guide on how to install treble roms in samsung exynos devices using TWRP or anything else. Please help us.
I tried to install the following roms
1. OmniP-arm64_aonly_vanilla_nosu
2. PixelExperienceP-arm-aonly
3. dotOS-O-v2.4-santoni-OFFICIAL-20180723
All the above roms are treble roms and I failed to install.
My device also supports Project Treble.
Please Help:crying::crying::crying:
Click to expand...
Click to collapse
Which twrp? and give forum link for your device....
In 3rd option santoni is a Xiaomi mobile i think....
I also have samsung galaxy j6 2018 and have project treble support so tried flashing
PixelExperienceP-arm-aonly gsi system image but failed. I flashed through twrp given in following thread
https://forum.xda-developers.com/galaxy-j/development/recovery-twrp-3-2-2-0-galaxy-j6-on6-t3819751
Any help ?
Is there even some way to install treble roms on tje j6? I could really need a different rom
Nitin devarapalli said:
Note To Developers :
I have tried to install so many treble roms in my Galaxy J6 Infinity and always failed to install. Can any developer please provide us a full guide on how to install treble roms in samsung exynos devices using TWRP or anything else. Please help us.
I tried to install the following roms
1. OmniP-arm64_aonly_vanilla_nosu
2. PixelExperienceP-arm-aonly
3. dotOS-O-v2.4-santoni-OFFICIAL-20180723
All the above roms are treble roms and I failed to install.
My device also supports Project Treble.
Please Help:crying::crying::crying:
Click to expand...
Click to collapse
Dude, there IS a tutorial on how to flash treble GSIs! You're just not willing to use a simple thing like GOOGLE!
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
Now, from what I read here is that a perquisite is that you don't have a patched boot/ramdisk aka a rooted phone.
If you have a rooted phone, you're going to have to install a fresh, unmodified kernel (boot.img) and then try it
I'll give it a try and try to post back results. I'm not familiar with how project treble works, but I doubt it's as easy as it sounds
@ShaDisNX255 plz share the result. I too have a Galaxy J6 and wanted to have an AOSP based rom in it. If u succeed, plz post it here. Not a big fan of Touchwiz.
hmm i failed myself, tried system-180818-arm-aonly-gapps.img without succes.
1. i've installed TWRP https://forum.xda-developers.com/galaxy-j/development/recovery-twrp-3-2-2-0-galaxy-j6-on6-t3819751
2. install Resurrection Remix ARM A Only Devices (system-180818-arm-aonly-gapps.img)
3. on system image
4. reboot
result endless reboot
Samsung probably went out of their way to make it harder.
Too busy to experiment myself but from my first tests I didn't get it to work.
Oh well, so much for "Project treble making it easier"
lol
ShaDisNX255 said:
Samsung probably went out of tbeir way to make it harder.
Too busy to experiment myself but from my first tests I didn't get it to work.
Oh well, so much for "Prohect treble making it easier"
lol
Click to expand...
Click to collapse
Trust me when i say this but i really want u to succeed. Touchwiz is too damn heavily bloated to use. Really hope u make it work!
adityam0338 said:
Trust me when i say this but i really want u to succeed. Touchwiz is too damn heavily bloated to use. Really hope u make it work!
Click to expand...
Click to collapse
It's fairly easy to debloat using something like Super R's kitchen.
Why would you buy a J6 if you hate Touchwiz?
There are waaaaay better options that have closer to stock Android experiences than a Samsung phone
ShaDisNX255 said:
It's fairly easy to debloat using something like Super R's kitchen.
Why would you buy a J6 if you hate Touchwiz?
There are waaaaay better options that have closer to stock Android experiences than a Samsung phone
Click to expand...
Click to collapse
Lol that's the issue. Got the phone from my parents. Never would've bought this myself. I like AOSP based roms. Yeah i know its easy to debloat but i just count it as a con of toucwiz(weird as it may be). So here i'm scratching my head and looking all round the internet to find a possible way to turn this to my liking. 4pda also gave negative results, so replying to some recently created threads seemed like my last resort. Btw have u found a working GCAM port for this phone. Tried 6-7 ports but none of them even got installed.
adityam0338 said:
Lol that's the issue. Got the phone from my parents. Never would've bought this myself. I like AOSP based roms. Yeah i know its easy to debloat but i just count it as a con of toucwiz(weird as it may be). So here i'm scratching my head and looking all round the internet to find a possible way to turn this to my liking. 4pda also gave negative results, so replying to some recently created threads seemed like my last resort. Btw have u found a working GCAM port for this phone. Tried 6-7 ports but none of them even got installed.
Click to expand...
Click to collapse
Nope, I'm not much of a picture taker.
Lol a lot of people get phones from their parents, just be glad you're not stuck with a phone with a ****ty processor like Mediatek.
And well, I'm not an experienced person, so I wouldn't even be able to port something like Lineage or the like, sorry
ShaDisNX255 said:
Nope, I'm not much of a picture taker.
Lol a lot of people get phones from their parents, just be glad you're not stuck with a phone with a ****ty processor like Mediatek.
And well, I'm not an experienced person, so I wouldn't even be able to port something like Lineage or the like, sorry
Click to expand...
Click to collapse
Yeah, I'm grateful to them. And i don't expect u to port a rom. Nonetheless im grateful to u for trying treble. Just hope u get positive results. Cheers! ?
adityam0338 said:
Yeah, I'm grateful to them. And i don't expect u to port a rom. Nonetheless im grateful to u for trying treble. Just hope u get positive results. Cheers! ?
Click to expand...
Click to collapse
Hopefully somebody figures it out
ShaDisNX255 said:
Hopefully somebody figures it out
Click to expand...
Click to collapse
Yep, hope somebody does. ??
I failed again, had to stop,out of options. This phone is my only device atm. Kicked back to original stock rom.
KRiST0F said:
I failed again, had to stop,out of options. This phone is my only device atm. Kicked back to original stock rom.
Click to expand...
Click to collapse
I think the problem is with TWRP cause i read in some other threads that u need some vendor partition enabled( or sthng like this) TWRP to flash Pie GSIs. Not sure if im right or wrong. But this is the first thing that comes to mind.
adityam0338 said:
I think the problem is with TWRP cause i read in some other threads that u need some vendor partition enabled( or sthng like this) TWRP to flash Pie GSIs. Not sure if im right or wrong. But this is the first thing that comes to mind.
Click to expand...
Click to collapse
that was also something i thought of, because in some procedures they speak of a trebel recovery mode
TWRP on the J6 DOES support the vendor partition, so I don't understand what you're trying to say
ShaDisNX255 said:
TWRP on the J6 DOES support the vendor partition, so I don't understand what you're trying to say
Click to expand...
Click to collapse
Ok. I didn't know that. Thnx for the info. Then what is going wrong with the treble GSIs??
Link: https://www.google.com.ph/amp/s/for...lopment/experimental-phh-treble-t3709659/amp/
No major bugs found
Been using it for a week and i can assure you that you can use it as your daily driver
Hey, this might seem like a noob question, but how did you install the GSI? I got TWRP, stock ROM and Magisk, but any GSI I attempt to install ends up in a boot loop.
Thanks in advance!
metiis said:
Hey, this might seem like a noob question, but how did you install the GSI? I got TWRP, stock ROM and Magisk, but any GSI I attempt to install ends up in a boot loop.
Thanks in advance!
Click to expand...
Click to collapse
ARM64 GSIs will always result in bootloop. You need to use ARM GSIs. I made that mistake as well, thinking that because the CPU is ARM64 that so was the OS.
can you make a video about project treble please !?
mickakelove164 said:
Link: https://www.google.com.ph/amp/s/for...lopment/experimental-phh-treble-t3709659/amp/
No major bugs found
Been using it for a week and i can assure you that you can use it as your daily driver
Click to expand...
Click to collapse
Hi, what model are you using this on? Im using SM-J415gn/ds, wondering if this will work with mine.
kapmino269 said:
Fixed
Click to expand...
Click to collapse
is this ASOP?
not booting
what did you do to get it to boot ? i installed this gsi and ended up in a bootloop (again) i dont understand whats going on anymore XD. I installed ARM A only and ARM64 A only but non of them work i installed a custom boot img but it doesnt work....
dewin_prins said:
not booting
what did you do to get it to boot ? i installed this gsi and ended up in a bootloop (again) i dont understand whats going on anymore XD. I installed ARM A only and ARM64 A only but non of them work i installed a custom boot img but it doesnt work....
Click to expand...
Click to collapse
You need to install one custom rom before you install gsi in order for it to work do make sure you install correct arm version. There is this guy called max lee on youtube with channel high on android his videos mivht be helpful to you
I purchased an A10e only to find the app I wanted to use the phone for is only compatible with 64bit android. As far as I can tell the phone has a 64 bit processor but 32 bit android. I am not really familiar with rooting and have recently "soft bricked" a phone that I was unable to figure out how to restore to normal.
Is there a simple guide to upgrading android on the phone?
No ?*?
Sent from my a10e using XDA Labs
join me and we can beg for a 64BITS Vendor for our cell phone hahahaha
try dling the source code and building a 64bit vendor
elliwigy said:
try dling the source code and building a 64bit vendor
Click to expand...
Click to collapse
how could i do that?
have any tutorial?
rockeirodohs said:
how could i do that?
have any tutorial?
Click to expand...
Click to collapse
google it
Sent from my SM-G977P using Tapatalk
I mean... it COULD be possible.... maybe (?)
After seeing Exynos 7870 get a 64bit vendor I'm thinking anything's possible
Try looking around the Exynos 7870 SoC to see if you can get some clues on how to get a 64bit vendor on this phone
XDA should be a good place to start
yimla said:
I purchased an A10e only to find the app I wanted to use the phone for is only compatible with 64bit android. As far as I can tell the phone has a 64 bit processor but 32 bit android. I am not really familiar with rooting and have recently "soft bricked" a phone that I was unable to figure out how to restore to normal.
Is there a simple guide to upgrading android on the phone?
Click to expand...
Click to collapse
i think you can't
yimla said:
I purchased an A10e only to find the app I wanted to use the phone for is only compatible with 64bit android. As far as I can tell the phone has a 64 bit processor but 32 bit android. I am not really familiar with rooting and have recently "soft bricked" a phone that I was unable to figure out how to restore to normal.
Is there a simple guide to upgrading android on the phone?
Click to expand...
Click to collapse
You can. Install android 11 Lineage os 18.1 it's arm64 and arm64 gapps also works very well. I am using it right now
ShaDisNX255 said:
I mean... it COULD be possible.... maybe (?)
After seeing Exynos 7870 get a 64bit vendor I'm thinking anything's possible
Try looking around the Exynos 7870 SoC to see if you can get some clues on how to get a 64bit vendor on this phone
XDA should be a good place to start
Click to expand...
Click to collapse
Bro what are you saying? Just flash a custom ROM that supports arm64
thewh1teagle said:
i think you can't
Click to expand...
Click to collapse
No he can
Abd El-Rahman El-Batal said:
Bro what are you saying? Just flash a custom ROM that supports arm64
Click to expand...
Click to collapse
Dude, these messages were before the a10 got 64bit libs ported over. Of course now there are many 64bit ROMs.
ShaDisNX255 said:
Dude, these messages were before the a10 got 64bit libs ported over. Of course now there are many 64bit ROMs.
Click to expand...
Click to collapse
Ok lol
does anyone know how to modify the stock os file running 32 to 64 bit please help? because there is no android version that supports 64bit released by samsung, so it has to be customized, i just need how and where to customize the latest rom version. The help is to install android with 64bit support when there is no version released by the manufacturer which is a silly answer. I think 64bit support but running on 32bit makes the phone run faster and svae batery, and 64bit on that phone may slow down your phone and only using some 64bit apps can be smooth. As for 64bit applications that require powerful processing, even if you can install them, you will have problems with lag and overload
How can I port for the with the same processor? in vendor.img which files do i need to change? which lib? etc. thx
0
Seppppx said:
There isn't a specific guide for this. You will have to use your creative thinking to create solutions for problems. But you can follow these steps.
1. If you want to port your vendor to a new android version. See what was changed with phones with the same SoC.
2. Replace old files with new files from the other device vendor.
3. Be careful. You can mess up your phone.
Click to expand...
Click to collapse
I want to try this for gsi roms. Because current GSI roms send me to the recovery part. can't boot.
As you said number 2 I don't know which old files to replace
if it's easy for you maybe one day help with teamviewer
You'd build a GSI system image and change that. You don't need to use /vendor as it contains blobs for the device and doesn't need to be changed.
0
Seppppx said:
You won't need to port a vendor partition if you want to try GSIs.
Unless your phone is not treble. Have you checked if your phone is treble? You can do that by installing treble check from the Google Play store.
Which GSIs have you tried?
What device do you have?
What Android version do you have.
Devices that ship with Android 8 must be treble because of requirements by Google. (Unless your phone isn't google certified or VTS certified, I'm not sure)
You can see which files to add and delete (this won't be the same for your phone) by looking at the diff between treble and non treble proprietary-files.txt, proprietary-files-qc.txt, proprietary-files-qc-perf.txt.
https://github.com/ArrowOS-Devices/android_device_asus_zenfone3/compare/arrow-9.x...9.x-non-treble
Click to expand...
Click to collapse
Again hi. Phh gsi roms work fine. I want to try Ertan gsi. erfan gsi does not boot. That's why I thought maybe porting would be the solution. I have gm9 pro. Sp660 SoC. I want try a2 vendor port but ı cant
aykutfb93 said:
Again hi. Phh gsi roms work fine. I want to try Ertan gsi. erfan gsi does not boot. That's why I thought maybe porting would be the solution. I have gm9 pro. Sp660 SoC. I want try a2 vendor port but ı cant
Click to expand...
Click to collapse
No it's with how the system.img is built. Sometimes takes a bit more work to get things booting
TheExploitedOne said:
No it's with how the system.img is built. Sometimes takes a bit more work to get things booting
Click to expand...
Click to collapse
oh okey understand. I think there is no any solution :/
aykutfb93 said:
How can I port for the with the same processor? in vendor.img which files do i need to change? which lib? etc. thx
Click to expand...
Click to collapse
Ihave The Same Question but with different processor
A quick test with ADB shows that the A21s is compatible with project treble. Could this be used to flash GSI ROMs?
BeatLink said:
A quick test with ADB shows that the A21s is compatible with project treble. Could this be used to flash GSI ROMs?
Click to expand...
Click to collapse
Yes. But we don't have working twrp yet
There seems to be unofficial builds of TWRP already: https://forum.xda-developers.com/t/recovery-unofficial-twrp-for-galaxy-a21s.4197239/
If we could iron out a few bugs and kinks and find a maintainer, maybe we could make it official
BeatLink said:
There seems to be unofficial builds of TWRP already: https://forum.xda-developers.com/t/recovery-unofficial-twrp-for-galaxy-a21s.4197239/
If we could iron out a few bugs and kinks and find a maintainer, maybe we could make it official
Click to expand...
Click to collapse
Never install this TWRP. This almost ruined my phone.
I used Lineage Recovery to install OS 18.1
Rishi_5717 said:
Never install this TWRP. This almost ruined my phone.
Click to expand...
Click to collapse
It will not work if you're not on u5 binary , the problem with this phone is if you managed to bypass or just flash the unofficial binary which targets binaries lower than 7 , when you reboot to system it auto enters download with something like bad header/bad magic.
beginner148 said:
It will not work if you're not on u5 binary , the problem with this phone is if you managed to bypass or just flash the unofficial binary which targets binaries lower than 7 , when you reboot to system it auto enters download with something like bad header/bad magic.
Click to expand...
Click to collapse
I'm on U6 bruh.
Rishi_5717 said:
I'm on u6 , what are you talking about?
Click to expand...
Click to collapse
Good you can use the lineage recovery and that's it , i still didnt try flashing it on s7 binary with exkernel manager so you think it's worth trying or it's not gonna work anyways????
beginner148 said:
Good you can use the lineage recovery and that's it , i still didnt try flashing it on s7 binary with flashify so you think it's worth trying or it's not gonna work anyways????
Click to expand...
Click to collapse
Nothing more now bruh. I already changed my phone to Poco..........
Rishi_5717 said:
Nothing more now bruh. I already changed my phone to Poco..........
Click to expand...
Click to collapse
It looks like nobody's willing to tamper enough with this phone , unfortunately im still a student who had terrible experience with a xiaomi mtk phone if it was up to me i will but no backup
beginner148 said:
It looks like nobody's willing to tamper enough with this phone , unfortunately im still a student who had terrible experience with a xiaomi mtk phone if it was up to me i will but no backup
Click to expand...
Click to collapse
Mtk is just a crap. I always prefer a Snapdragon for any reason.