Related
Adapted oficial ROM with @mparus kernel
Flash this recovery ( only work whit this)
https://mega.nz/#!BZtE1bzZ!rlzdHNpf6Xs4t00o-GjHJbTUnE4s9aaNmsv1TutLLy8
Flash rom
Flash adaptation zip
Flash navbar
Flash gapps
For update ThE shame operation with wipes cache and dalvik,system
Adaptation zip
Enable navbar
ROM
https://download.lineageos.org/cherry
Bugs
Nfc
Are you maintaining official builds of lineage for G7? Does this mean that we'll be getting updates?
Enviado desde mi Moto G4 Plus mediante Tapatalk
can i flash it to g7-l11 its on android 6.0.1 and i unlocked the bootloader and install twrp 3.0.0 and root with magisk
Can you please reupload Adaptation zip and navbar somewhere, where registration is not required?
last mparus kernel http://www7.zippyshare.com/v/np9rnEOK/file.html
luistro said:
last mparus kernel http://www7.zippyshare.com/v/np9rnEOK/file.html
Click to expand...
Click to collapse
One question bro... Does the rom support F2FS?
Sent from my Moto G4 Plus using Tapatalk
I have 2 issues.
1- Apps wont open sometimes. Stops working.
2- Storage insufficient. I choose sd card as a internal and storage is 15gb/44gb but it says no place for apps or photos.
Please help.
And i couldnt get the adaptation.ziip so i have cherry rom but not properly.
no problema here
can you plz redownload the navbar enabling ?
can i flash it using twrp cause i have problem with philz
Folueadeux said:
can i flash it using twrp cause i have problem with philz
Click to expand...
Click to collapse
of course
GessaNNN said:
of course
Click to expand...
Click to collapse
well actually, as op mentioned it works with philz only.
i tried installing with twrp, it failed and the error message was something like this rom is not compatible with your device.
then i tried the recovery op linked, worked a charm.
mhanp said:
I have 2 issues.
1- Apps wont open sometimes. Stops working.
2- Storage insufficient. I choose sd card as a internal and storage is 15gb/44gb but it says no place for apps or photos.
Please help.
And i couldnt get the adaptation.ziip so i have cherry rom but not properly.
Click to expand...
Click to collapse
Hi.first register on htcmania to download files and install rom and other tools and gapp and clean cach/delvik and restart...with philz recovery...
Excuseme my english not good..
Personally, I inject an install script made by me in which there's G760-L01 as compatible device everytime I download a new nightly, then it flashes with TWRP without problems.
updated firts post
Can someone help me with an issue i have?
my headphone jack stopped working and the only way it works again is with an app called SoundAbout but i'm very tired of switching modes everytime..
is my headphone jack damaged or is it the system not correctly routing the sounds?
I've flashed many ROMs and still no fix, have to use this stupid app please help!
Hello, I was trying to install this custom rom from TWRP 2.8.7.0 but when i try to flash this file i get the following error
E3004: This package is for device : c8817d,g620s,C8817D,C8817E,G621-TL00,G620S-UL00,G620-L01,Che1-CL20,Che1-L04:
this device is .
Click to expand...
Click to collapse
along with the following error messages (that i think they are related to twrp):
E: unknown command [log]
E:Error executing updater binary in zip '/external_sd/lineage-14.1-20170904-nightly-cherry-signed.zip'
Error flashing zip '/external_sd/lineage-14.1-20170904-nightly-cherry-signed.zip'
Click to expand...
Click to collapse
I don't have that much skills in rom flashing for android (I've only flashed almost successfully another rom for a lg g7-01), so can someone please help me with this?
Thanks in advance, Spinoni31.
Edit: I decided to switch to philz and it worked. The only things that don't seem to work are the NFC, and with it, my flip cover. If soemone can help me on this matter, i would really appreciate it. Thaks, Spinoni31
works perfectly fine if you're gonna flash it with the recovery linked.
flashing magisk and bypassing safetynet works.
Haven't experienced any annoying bugs yet. NFC doesn't work as said, but i don't even need/use it.
Thank you very much for this ^^
Vodes said:
works perfectly fine if you're gonna flash it with the recovery linked.
flashing magisk and bypassing safetynet works.
Haven't experienced any annoying bugs yet. NFC doesn't work as said, but i don't even need/use it.
Thank you very much for this ^^
Click to expand...
Click to collapse
Magisk link please :highfive:
Alanryav said:
Magisk link please :highfive:
Click to expand...
Click to collapse
Works perfectly fine with the official Magiskv14.0.zip
I compiled the GSI overnight, its aosp_arm64_a Legacy GSI, because the ones I keep downloading are all August security patch and I wanted it a little more up to date. I got the source directly from google and built it myself. AB is now uploaded as aosp_arm64_ab. A only is also up as aosp_arm64_a-aosp. I ran it on my One Plus 5, NFC was buggy but the camera, ril, Bluetooth, wifi, and everything I tried out worked. this is vanilla, so its bare bones. no apps besides the basics, no mods or any customizing. As this is a GSI it should be useable on many devices, I can only help you with the devices that I own, pixel XL and one plus 5. If you have a device other then that, you will have to find help from someone knowledgeable about that device. I have had success using twrp and fastboot to flash the system image. I was told doing it via fastboot is the best, so you can disable verified boot, then flash, then format all in one shot. My device did not require me to disable the verify boot. From my end it was literally as simple as 3 commands via fastboot and then restart the device and I was in. I flashed a 50mb gapps package from xda here, and magisk. took some photos, connected my Bluetooth speaker, made a call. sent some texts, installed a few apps. I will be staying on stock. But only because my device has stock pie, and the theming from one plus far trumps google.
aosp_arm_a-userdebug and aosp_arm_ab-userdebug added
https://mega.nz/#F!Xh4g2KSB!EJIGQtvLFKzHzqKXmZI7tg
Sources: https://source.android.com/setup/build/gsi
Do you find it smoother than HOS Pie Beta ?
Thanks for your share! Awesome, I don't need/use NFC.
korm85 said:
Do you find it smoother than HOS Pie Beta ?
Click to expand...
Click to collapse
It's very fast. install and boot was very fast. but I just discovered my home button does not work. however I don't assume that would be a difficult fix. the back and pages button are working. its very bare tho, you need to install everything you want manually. Which I prefer, it gives me more control over my phone I find. Hydrogen works ok too, it just requires a bit of work to get play store going and remove all the bloatware. GSI camera worked fine from boot.
Dzol Cp said:
Thanks for your share! Awesome, I don't need/use NFC.
Click to expand...
Click to collapse
upload is at finished now
can a mod change the title to reflect that this will have the AB and A GSI not just A? Please and thank you.
Thanks! Any chance of an arm build?
Got no boot ......?!
Device's nubia z17 sd835
91egt said:
Thanks! Any chance of an arm build?
Click to expand...
Click to collapse
yea, it will be up in the morning. I did A and just about done AB for arm64, then will do A and AB arm
aljoscha81 said:
Got no boot ......?!
Device's nubia z17 sd835
Click to expand...
Click to collapse
how did you flash it? I didnt use trwp, I used fastboot from the pc
godkingofcanada said:
how did you flash it? I didnt use trwp, I used fastboot from the pc
Click to expand...
Click to collapse
Maybe thats the matter i always use twrp but got..... So far never problems ....?
Make it a difference?
aljoscha81 said:
Maybe thats the matter i always use twrp but got..... So far never problems ....?
Make it a difference?
Click to expand...
Click to collapse
It shouldn't. But its twrp. Weird things happen. Use fastboot. Its only 3 or 4 steps. The tutorial is on the google gsi website. I tried via twrp and had no issues however. It started to launch then rebooted, second boot it loaded OK
Cracked screen. But you can see the build info
godkingofcanada said:
Cracked screen. But you can see the build info
Click to expand...
Click to collapse
Ok.. will test out with fastboot thanks a lot!
aljoscha81 said:
Ok.. will test out with fastboot thanks a lot!
Click to expand...
Click to collapse
No problem
AB will be posted in about 2-3 hours. After that I will build A only Arm. It should be available by morning.
a/b please
irfaniphank2 said:
a/b please
Click to expand...
Click to collapse
Aosp_arm64_ab-userdebug will be on the link in post 1 in about 90 min. Its 90% done building.
godkingofcanada said:
Aosp_arm64_ab-userdebug will be on the link in post 1 in about 90 min. Its 90% done building.
Click to expand...
Click to collapse
:good::good::good::good::good::highfive::highfive::highfive:
AB arm64 legacy is now uploaded to the link in post one. Arm A and AB will show up over night. Starting with a in the morning. It takes about 4.5 to 5 hours to build
Hi
I am trying to find any custom rom that could be flashed on my J600F device.
Long story short, there is not.
I learned (and checked) J6 is actually compatible with project treble.
Now, that i know i can flash GSI roms, i am still a bit confused if this device is ARM/ARM64.
Any clue ?
dzeron said:
Hi
I am trying to find any custom rom that could be flashed on my J600F device.
Long story short, there is not.
I learned (and checked) J6 is actually compatible with project treble.
Now, that i know i can flash GSI roms, i am still a bit confused if this device is ARM/ARM64.
Any clue ?
Click to expand...
Click to collapse
I don't know too much about the subject, but I read that you need GSI's that are ARM with ARM64 binders. Samsung likes using 64-bit chips to run in 32-bit mode lol
ShaDisNX255 said:
I don't know too much about the subject, but I read that you need GSI's that are ARM with ARM64 binders. Samsung likes using 64-bit chips to run in 32-bit mode lol
Click to expand...
Click to collapse
Thank you for the answer.
That's quite even more confusing unfortunately.
If anything comes up, like a GSI/Custom rom (i tried without any positive result) that you are sure it should work for the device.. PM me anytime
dzeron said:
Thank you for the answer.
That's quite even more confusing unfortunately.
If anything comes up, like a GSI/Custom rom (i tried without any positive result) that you are sure it should work for the device.. PM me anytime
Click to expand...
Click to collapse
On 4pda there is a working gsi
Kep1105 said:
On 4pda there is a working gsi
Click to expand...
Click to collapse
Send me the link and thank you !! :good:
dzeron said:
Send me the link and thank you !! :good:
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?s=&showtopic=908536&view=findpost&p=81620052
What's that I wanna know
Currently using Omni ROM gsi
danicadanicadanica said:
Currently using Omni ROM gsi
Click to expand...
Click to collapse
pls tell me what GSI rom did you install with complete package name of the rom, and link, thanks in advance. Hope you read my reply
For the record, the name that the GSI are adapting that are compatible with the J6 is called a64 or sometimes referred to as arm32_binder64
Not to be confused with arm64 which is completely 64 bits
So, the GSI are as follows:
arm - Not compatible with J6
arm64 - Not compatible with J6
a64 - Compatible with J6
Has anyone already tested this rom?
RR-P-v7.0.0-20190227-hermes-Unofficial
https://mega.nz/#F!0ZgiDaCS!1qISJ4mb9jWnA1W2vfUJcg
Noob9496 said:
Has anyone already tested this rom?
RR-P-v7.0.0-20190227-hermes-Unofficial
https://mega.nz/#F!0ZgiDaCS!1qISJ4mb9jWnA1W2vfUJcg
Click to expand...
Click to collapse
If it's from this thread then it bootloops
coolikar said:
If it's from this thread then it bootloops
Click to expand...
Click to collapse
Maybe after flashing by new recovery this rom will work.
New recovery https://eu.dl.twrp.me/hermes/twrp-3.3.0-1-hermes.img.html
Flashed the new twrp but hadn't had the time to flash the ROM.
Will try it out later today. Did you try flashing it? I don't know how the twrp version is tied to the ROM not booting, hovewer.
coolikar said:
Flashed the new twrp but hadn't had the time to flash the ROM.
Will try it out later today. Did you try flashing it? I don't know how the twrp version is tied to the ROM not booting, hovewer.
Click to expand...
Click to collapse
I will try to flash this rom this weekend. In the new recovery they introduced changes, maybe something will work.
Noob9496 said:
I will try to flash this rom this weekend. In the new recovery they introduced changes, maybe something will work.
Click to expand...
Click to collapse
Okay, flashed it with the new TWRP to no avail. Blank screen, didn't debug it or something to find out why, not experienced with this.
Didn't boot at all, so I think we should wait for the developer to go back to this and try fixing it.
coolikar said:
Okay, flashed it with the new TWRP to no avail. Blank screen, didn't debug it or something to find out why, not experienced with this.
Didn't boot at all, so I think we should wait for the developer to go back to this and try fixing it.
Click to expand...
Click to collapse
My log after flashing.
Noob9496 said:
My log after flashing.
Click to expand...
Click to collapse
no work
edited build.prop
New flashable zip with edited build.prop file. I didn't tested it.
It also adds the unpacked system.new.dat.br file for those more familiar with the topic of creating custom roms.
https://drive.google.com/open?id=1vq7jXHlRt21ag8k9UWe3j1b79Sq334P8 RR-P-v7.0.0-hermes-Unofficial
https://drive.google.com/open?id=1qaE1Du5QJMwAXKrme7eS2ikF4hU4Yazi system.zip
Working?
KimLeh said:
Working?
Click to expand...
Click to collapse
I try flash it via twrp3.3.0.1 today. Not working.
Where did u find these pie roms?
https://mega.nz/#F!0ZgiDaCS!1qISJ4mb9jWnA1W2vfUJcg!pAw0lYiA
So has anyone got this flashed and booting yet???
What recovery did you actually use?
Whats working and whats not?
Can you provide photos of the rom working?
What bugs did you find?
lohtse said:
So has anyone got this flashed and booting yet???
What recovery did you actually use?
Whats working and whats not?
Can you provide photos of the rom working?
What bugs did you find?
Click to expand...
Click to collapse
READ this post!!!
This ROM no booting
link error!
I think android pie is not able to run on this device.
intel_outside said:
I think android pie is not able to run on this device.
Click to expand...
Click to collapse
Yes, android pie does not work on this smartphone, just like android oreo. Only androids from version 5 to 7.1.2.
Noob9496 said:
Yes, android pie does not work on this smartphone, just like android oreo. Only androids from version 5 to 7.1.2.
Click to expand...
Click to collapse
This is android oreo fully working.
https://forum.xda-developers.com/re...o-lineageos-15-1-xiaomi-redmi-note-2-t4087575
Hi everyone, I've been trying to find a custom rom for Xiaomi Mi 12X, but none found so far. I tried to port Pixel Experience rom using the Xiaomi Mi 11X (alioth) device tree and changed accordingly, since the SOC and almost all specs are the same except Camera. Can anybody shed some light in how to correctly port the ROM for my devices without official device tree from LineageOS or Pixel Experience? Thank you.
Anybody has any suggestions?
JChanMe said:
Anybody has any suggestions?
Click to expand...
Click to collapse
Hi, right now I'm using crdroid gsi, which works pretty good. Except of fp, everything works as it should. It's smooth, has a good bb and even MGC's Gcam 8.1, last stable, works incl. portrait, nightmode and with all lenses (ok, no pixelbinning). Installing is pretty simple: use fastbootd and just fash img to system. That's it....
Voodoojonny said:
Hi, right now I'm using crdroid gsi, which works pretty good. Except of fp, everything works as it should. It's smooth, has a good bb and even MGC's Gcam 8.1, last stable, works incl. portrait, nightmode and with all lenses (ok, no pixelbinning). Installing is pretty simple: use fastbootd and just fash img to system. That's it....
Click to expand...
Click to collapse
Thank you but I don't see it on crdrood website, did you build it yourself?
JChanMe said:
Thank you but I don't see it on crdrood website, did you build it yourself?
Click to expand...
Click to collapse
It's a gsi treble rom (that works with many vendors)... Just search for project treble on xda!
Voodoojonny said:
It's a gsi treble rom (that works with many vendors)... Just search for project treble on xda!
Click to expand...
Click to collapse
Thank you. I figured it out and tried a few treble roms including pixel experience, there are a few problems including auto brightness, fingerprint and vibrator. You had the same problems?
JChanMe said:
Thank you. I figured it out and tried a few treble roms including pixel experience, there are a few problems including auto brightness, fingerprint and vibrator. You had the same problems?
Click to expand...
Click to collapse
Yes, especially the sound makes problems... When usung videocall, it's awfully distorted. I'm using stock for now. With Lawnchair and some modifications it's ok for now.
Do you know, why there's no thread for our phone here?
Just seen, you are forking some repositories... Have you been successful in building?
Voodoojonny said:
Just seen, you are forking some repositories... Have you been successful in building?
Click to expand...
Click to collapse
I successfully build the ROM without errors, just some warnings, but it didn't boot aftter flashing it.
JChanMe said:
I successfully build the ROM without errors, just some warnings, but it didn't boot aftter flashing it.
Click to expand...
Click to collapse
Did you flash with vendor or system only?
Voodoojonny said:
Did you flash with vendor or system only?
Click to expand...
Click to collapse
No, I used the same procedure as described for Alioth device, fastboot flash boot boot.img, then from recovery use adb push to update the zip ROM file.
JChanMe said:
No, I used the same procedure as described for Alioth device, fastboot flash boot boot.img, then from recovery use adb push to update the zip ROM file.
Click to expand...
Click to collapse
But how did you built the rom. Did you get out a flashing zip directly? Normally, you create different partitions as fas as I know... Would you share your rom? Btw. which one did you build?
Voodoojonny said:
But how did you built the rom. Did you get out a flashing zip directly? Normally, you create different partitions as fas as I know... Would you share your rom? Btw. which one did you build?
Click to expand...
Click to collapse
Yes, after building I got a zip and flashing it using update by adb push. I built Pixel Experience Android 11
JChanMe said:
Yes, after building I got a zip and flashing it using update by adb push. I built Pixel Experience Android 11
Click to expand...
Click to collapse
But you used the lineage device tree. And PE is aosp not lineage. Might that be the problem? Would you try to build crdroid? Or instruct me how to setup a build environment?
No, I used the PE device tree, not Lineage. I used the build instructions provided by Pixel Experience for Alioth.
JChanMe said:
Anybody has any suggestions?
Click to expand...
Click to collapse
Yesterday xiaomi released kernel for 12x on GitHub. So I think now you can build pe/los without troubles
Maxletsplay_1 said:
Yesterday xiaomi released kernel for 12x on GitHub. So I think now you can build pe/los without troubles
Click to expand...
Click to collapse
Didn't they release the kernel when the phone was released?
JChanMe said:
Didn't they release the kernel when the phone was released?
Click to expand...
Click to collapse
Technically yes, but i've checked GitHub(about month ago) and I didn't saw kernel for this phone, just an empty folder
JChanMe said:
Didn't they release the kernel when the phone was released?
Click to expand...
Click to collapse
Did you replaced vendor libs with libs from 12x and other stuff like fstab, bins, rc files..configs? Attach logs from boot if you decide to build again. My advice is to build as eng and disable encryption, put selinux to minimal mode, nuke livedisplay, import vendor modules if you build with stock prebuilt kernel. Always look for F Linker errors in log and resolve them.
I'm waiting for AOSP rom too.