I have flashed TWRP on XZ1 (SOV36). But when I flash GSI roms, the phone is stuck on sony screen and won't do nothing. Still can access TWRP but can't flash nothing (it will flash but won't boot). Also tried with fastboot but same results. Any suggestions will be greatly appreciated.
Update: Converted the SOV36 to G8341 and everything is fine now.
Related
Hi! I have a weird issue. Any new roms like 7.1.2, 8.0etc are just not booting up in my redmi note 3. I always get stuck at the boot logo. The phone vibrates and hints as if it is going to boot up boot its not. The process continues and the phone doesn't boot up. It works all fine with the older roms. But with newer version the roms dont boot up. I tried several roms like Nitrogen,RR,Linege OS etc. But newer versions of both Nougat and Oreo roms don't boot up. I don't have any clue of what to do now. I have zcx twrp installed and have officially unlocked the bootloder. Please if anyone have any insight regarding the issue it will be helpful.
Thank You.
Check whether the bootloader is still unlocked by commands. Twrp in this case, is useless so flash MIUI official rom & again unlock officially.
Make sure you wipe everything in Twrp if the command says bootloader is unlocked.
Try flashing LazyFlasher after the ROM. Also, are you flashing the recommended firmwares before flashing the ROM?
Update modem (firmware). Either by: flashing latest MIUI Beta fastboot rom or from here
Hello,
I tried this morning to install a custom ROM for my sony xperia z5 compact. Unfortunately, it remains crashing on the "Sony" screen
I unlocked the bootloader via the official link https://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/. Until then no worries, everything worked well.
Then I wanted to install a TWRP recovery via this link https://forum.xda-developers.com/crossdevice-dev/sony/twrp-3-1-0-z5-z5c-z5p-t3571050
I was able to flash it without worries but when restarting, TWRP asked me if I wanted to install the app, I put OK and from there, impossible to start my phone. "always stuck on Sony screen".
this is my config : E5823 / 32.4.A.1.54
I want just to start my phone. Is there possible to put a stock version? thanks
This is very urgent to resolve it unfortunately
Thanks for your help
you can close this subject, problem solved. Thanks
Wanna share how you fixed it?
Yes sure,
I flashed my recovery with the TWRP 3.1.1 posted before with the command "fastboot flash recovery {name_of_file.bin}" and I did a flash of the boot with the good version of boot with the commande "fastboot flash boot {name_of_file.bin}.
I founded the good boot at this address for my version : https://forum.xda-developers.com/z5-compact/general/32-4-1-54-coming-t3685995
I had RNE-L21C185 with Stock Oreo updated
Then flashed Mofruz latest rom working fine, but then I tried to install Stock recovery, I was not able to do so
as it would show error with partition etc. Then tried to install the same TWRP from Morfuz ROM back again.
In fastboot mode I already have PHONE Unlocked and FRP Unlocked messages
So either Morfuz ROM TWRP or any other TWRP recovery, show properly completion of flash command
But when tried to boot into recovery it goes in a loop (the loop shows phenom image, then shows the default
screen that is shown before launching of recovery), then restarts again, and it goes on loop.
So I dont know why I cannot get to load into any of TWRP I have.
The ROM is working fine, if I properly shutdown mobile and start it again, it boots to the phone and
I can use my phone as normal.
Any help guys ?
try to flash stock rom via hisuite
http://huawei-firmware.com/rom/huawei-mate-10-lite/rnel21/8437
or try one of these twrp
https://mega.nz/#!GxsAUQaS!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
https://drive.google.com/file/d/1_dfpSOCD23Oz_LexYMn1JNRVfrlvKU-x/view
https://mega.nz/#!OzQ3GCJK!ofjiXcb7VRpGkhrd1vwXrVeSAO2vF1BVYLYRX2fExn4
.
Thanks problem solved by:
Tried to use fastboot command to flash official stock Kernal and ramdisk (Oreo version) phone got no OS after it as
it will go on bootloop, now even the forced download (dload folder) method wont work, factory data reset wont work
(both of above will show EMUI circle with no processing or text whatsoever)
At this stage, flashed Catuva recovery from Morfuz ROM again, and it worked
Hi, I'm hoping someone can offer some assistance. I have an Elephone P9000 (normal version NOT lite) that has official Android 7.0 and I want to install LineageOS 14.1.
As per the instructions I used SP Flash Tool to downgrade the phone to Android 6 (Elephone_P9000_20170112) which worked fine.
I then attempted to install TWRP 3.2.1.0 which also appeared to work ok as I could boot into TWRP recovery and all looked good. However when I tried booting the phone normally it stuck at the white boot logo and would not progress any further.
So I reloaded the Elephone_P9000_20170112 rom again with SP Flash Tool after which the phone would boot normally and then tried installing TWRP 3.0.2.8 as I'd seen threads saying that this version definitely worked with the P9000. However this produced the same result that I could boot into TWRP fine but it would get stuck at the boot logo if I tried booting the phone normally.
I have also tried re-installing the ROM but unticking the recovery option in SP Flash Tool hoping that this would leave the working TWRP intact but this didn't work either.
When I try to boot into recovery I get the little Android laying down with a red exclamation mark.
So I don't know where to go now. I can get EITHER Android to boot or TWRP to boot but not both.
Just in case it is relevant, I am using SP Flash Tool v5.1804_Win in Windows 7 32bit. I don't have any SIM's in the phone and no SD card inserted.
Can someone point me in the right direction please.
Thanks
Russell
Try flashing stock rom with 810 at the end then twrp 3.2.1 and then aokp it is better then lineage
aljoscha81 said:
Try flashing stock rom with 810 at the end then twrp 3.2.1 and then aokp it is better then lineage
Click to expand...
Click to collapse
Thanks very much, that worked fine and AOKP looks really good. When it said install the latest Android v6 it obviously means the previous latest not the current latest
Just in case anyone else is having the same trouble I was:
Using SP Flash Tool load the 20160810 ROM available here: https://forum.xda-developers.com/elephone-p9000/development/rom-elephone-p9000-20160810-t3445897
Then, also using SP Flash Tool, load TWRP v3.2.1 which is available from here: https://eu.dl.twrp.me/p9000/
Then you can use the TWRP recovery to load whichever ROM you like (LineageOS, AOKP etc, etc)
Once again, thanks very much for your help.
:good:
Hi, I'm running Emui 9 on my ANE-LX1 and it got bricked while trying to flash openkirin roms. Each time I flash TWRP into the recovery_ramdisk partition, it just boots in to the stock recovery_ramdisk. Everytime I try to flash different system files, it doesn't even show boot animations and boots straight into stock recovery.
I don't know what to do and if someone has the solution, please help.
TIA
Turned out I somehow messed up the kernel. When I flashed the kernel, everything started working smoothly.