So, i bought galaxy s9 plus like 1,5 weeks ago, and i saw that csc is xfa. Ok, i flashed with odin like 3 times the newest xeo android 8.0.0 (im from poland) and nothing changed. still xfa/xfa/xfa. Then, when i wanted to see my imei, the csc is g965foxm2brj3. i searched it on google and the csc code is from germany?? if it's germany, how the heck it's xfa? and how can i change it?
Try factory reset.
Sent from my SM-G960F using Tapatalk
It is Poland. Check sammobile, select S9+, select Poland.
Related
Hello,
first, sorry for my Bad English...
So here is my Problem:
Bought S3 in Germany, also CSC = DBT
I flashed Omega V5.1 then i wanted back to origin Firmware, so i used TriangleAway and then flash the original Firmware with DBT (Downloaded it here in the Forum), now the Firmware is on the Phone, but KIES say it is not supportet...
KIES show CSC = EUR
How can this be? I flashed DBT, i can not change it with *#272*imei#, because there is only EUR to select
CAN PLEASE ANYBODY HELP ?!?!?
I recently wanted to change my csc to make my s3 updatable via KIES. Found that if I flashed to the UK (BTU) stock, when I did *#272*imei#, it presented me with many more options than my actual carrier stock.
I used to have an ATL CSC (Vodafone Spain) and I flashed my phone with the German firmware. After flashing it, I still had the ATL CSC but I did a hard reset and now it's DBT. So, I recommend you to do a hard reset but bear in mind you'll lose everything you have: SMS, contacts, etc.
Roastario said:
I recently wanted to change my csc to make my s3 updatable via KIES. Found that if I flashed to the UK (BTU) stock, when I did *#272*imei#, it presented me with many more options than my actual carrier stock.
Click to expand...
Click to collapse
Whst network were you on before?
Hello, i owned a Galaxy S Plus (i9001) and i am running stock i9001xxkpj. And i have flashed many firmwares on the phone and flashed some custom rom's on it. But when i press *#1234# in the dialer it says my CSC is unknown?
The thing is that when i press type *#272*IMEI# on the dial pad on the phone i have the chance to change the CSC to the pre-config. but it says "AUT" and my phone is bought unlocked in Norway and should have "NEE" for the Nordic Countries?
The thing is that i have flashed many firmwares and i flashed a switzerland firmware on there (i9001xxkqb) before. that can be the reason it says "AUT" but i have flashed many other firmwares on there later using ODIN on my PC, and the firmware i am running now should have a Nordic CSC not the "AUT" CSC. My I9001 is not rooted. Its not a very big deal. But the keyboard is not on Norwegian, not ÆØÅ. And i have problems with the APN settings.
So when i press *#1234# on the phone dialer it says:
PDA: I9001XXKPJ
PHONE:I9001XXKPF
CSC:Unknown
And when i press *#272*IMEI# to see how i could change back the CSC it says "AUT" even if i am running a Nordic firmware, HELP!!
So i would be glad if i got some help, have a nice day
Anyone?
There should be an app called 'baseband switcher'. You can switch the base band to your country. But i believe this works only on root
Try this.. http://forum.xda-developers.com/showthread.php?t=1052745
Hi, first post, but have been using all the helpful info from the forums for 6 months now with my TF201, this is related to my new i9300. I'll try to be as descriptive as I can:
Black i9300 purchased last week in the UK, but currently has the TGY (Hong Kong) CSC code. I tried flashing to the UK JB ROM on Sammobile but came back with an unknown CSC error. Fair enough. I followed some instructions i found to get to BTU CSC code:
Flash back to BTU ICS
Flash BTU CSC package
Use Galaxy CSC changer to select BTU
Reboot, now with a fully working ICS build, and BTU CSC (I9300OXAALF2).
However at this point i wasn't able to find any official OTA updates and Kies told me that my device was not compatible with kies updates.
Flashed the original JB UK ROM I downloaded and now i'm back with the unknown CSC.
Any ideas? I've already tried flashing the CSC package onto JB and that's not worked, so now i'm really stumped. As far as I can tell i've removed all HK CSC codes from my device as it was happy as BTU with ICS...
Thanks
Hi, I have a new A52s, I bought it off Amazon, and didn't realise it was a grey import. It works fine with my provider (iDMobile in the UK), apart from WiFi calling. iDMobile say the problem is because it's German firmware (DBT CSC), so I started reading up on how to change this. All of the tricks using the phone dialer codes no longer work, so I downloaded the UK Unbranded firmware (BTU CSC), and flashed with Odin. However my phone remains as DBT. I ran Phone Info, and that says that my current firmware is only DBT CSC, with no others available. I did read somewhere that you could get a CSC change if you repartitioned with Odin while flashing. Does anyone know if that's the case? Or are there other approaches that I need to use to change the CSC?
I'm afraid I don't have an answer but I have the same question.
Am looking to buy an A52S 5G primarily as it's supported by my carrier for Wifi calling but carrier price is extortionate.
Flashing carrier firmware worked before on an old S7 but I'm not sure about doing the same on an A52s 5G.
How did you get on OP ?
I'm in Australia with a Taiwan BRI csc a52s.
Wifi calling never worked on android 11, but now I've updated to android 12 and wifi calling is working with my australian telstra sim!
Hopefully this means wifi calling is no longer dependant on csc.
What happens when you flash different csc firmware with odin?
Hi everyone,
I am having trouble changing the CSC of my S20 FE. When I bought it, it believe all the csc codes were EUX. But when I changed the Firmware it went to CSC SER, which brings russian bloatware like Yandex with it.
After trying multiple firmwares with different CSC I gave up because it kept going to the SER CSC. Recently when android 12 came out I tried again and got it to a ZTO firmware again, but I notice the device gets warm to the touch pretty quickly, and want a CSC that is made for Europe, but not the SER one.
Does anyone know how to chnage the CSC to lets say XEF, or PHN?