Hi everyone,
My mibox bricked power down during updating
No power led, no display on screen only red light on audio jack slot
With home & back control combination does not open to recovery mode.
I'm looking orginal frimware img file for 3s MDZ-22-AB
thanks for help..
elitecop said:
Hi everyone,
My mibox bricked power down during updating
No power led, no display on screen only red light on audio jack slot
With home & back control combination does not open to recovery mode.
I'm looking orginal frimware img file for 3s MDZ-22-AB
thanks for help..
Click to expand...
Click to collapse
Same happened with me.. Someone pls help..
elitecop said:
Hi everyone,
My mibox bricked power down during updating
No power led, no display on screen only red light on audio jack slot
With home & back control combination does not open to recovery mode.
I'm looking orginal frimware img file for 3s MDZ-22-AB
thanks for help..
Click to expand...
Click to collapse
Sorry, there has never been a firmware .img file for this device, hence USB burning tool is not applicable.
Try a different power transformer, otherwise you have a total brick.
Time to request a replacement
Related
An apk called cleveriors cwm installer has made my phone unable to access either dmode or recovery it vibrates, flashes dark blue on half the screen for a second then repeats in a loop, attactchin usb without battery makes it vibrate but no reading from pc, please help this has really upset me
Remove battery press power button for 10 seconds then reinsert battery and (voldown +home +power ) to enter download mode and flash new frimware
PLEASE HELP bricked my samsung sm-g357fz
Hello all, I believe that my phone is bricked or half ; does not turn on, is as dead but sometimes comes on the screen and vibrates when I connect via USB and does not enter into download mode flasearlo , moreover when it enters in recovery mode (when you want to) appears in the snowman white , lying on the ground and a red triangle above, also displays the text "without commands". It is new and if is posible helpme with any solution i would be very grateful. Thanks in advance, Salutations
hisham_waleed_karam said:
Remove battery press power button for 10 seconds then reinsert battery and (voldown +home +power ) to enter download mode and flash new frimware
Click to expand...
Click to collapse
I have the same problem but can you help me walk through how to flash new firmware and where do I get the firmware from if you have the link. Please help!
http://samsung-updates.com/device/?id=SM-G357FZ&details=Galaxy_Ace_Style_LTE__SM-G357FZ
patsillah said:
I have the same problem but can you help me walk through how to flash new firmware and where do I get the firmware from if you have the link. Please help!
Click to expand...
Click to collapse
patsillah said:
I have the same problem but can you help me walk through how to flash new firmware and where do I get the firmware from if you have the link. Please help!
Click to expand...
Click to collapse
link of frimwares : http://samsung-updates.com/device/?id=SM-G357FZ&details=Galaxy_Ace_Style_LTE__SM-G357FZ
guide : look at this http://www.droidviews.com/install-stock-firmware-on-samsung-galaxy-devices-using-odin/
hello i recently tried to go back to my stock miui rom on my redmi note 3 and therefore downloaded a recovery rom in order to do that...but the thing is all the miui roms for all redmi devices were posted there and i made a huge mistake and downloaded the recovery rom for redmi 3 pro and only after i flashed the rom through recovery and when it didnt start at all i realised my mistake as of now it wont boot into fastboot or recovery..it wont even vibrate when it push the power button..all it does is blink a red light when i connect it to a charging cable...anyone facing anything remotely similar please leave me some answers.
You can try the next thing If the screen is completely black and red blinking led..
Connect USB and look at your PC Device info.
If you see the there the Qualcomm 9008 driver, the phone is in EDL mode and you can flash a better rom with Miflash.
good luck
vish9180 said:
hello i recently tried to go back to my stock miui rom on my redmi note 3 and therefore downloaded a recovery rom in order to do that...but the thing is all the miui roms for all redmi devices were posted there and i made a huge mistake and downloaded the recovery rom for redmi 3 pro and only after i flashed the rom through recovery and when it didnt start at all i realised my mistake as of now it wont boot into fastboot or recovery..it wont even vibrate when it push the power button..all it does is blink a red light when i connect it to a charging cable...anyone facing anything remotely similar please leave me some answers.
Click to expand...
Click to collapse
If your phone is not in eld mode you can do one thing. Hold your phone as you can press both the volume button simultaneously than connect usb cable to pc than first insert micro usb in your device than instantly press both the volume button. If led blinking that means your phone in eld mode
Hi, guys! I need help. All buttons for my homtom ht37 pro are not working and i need to turn it on somehow. But i got an idea. I can flash rom just by connecting phone to pc via flash tools, right? So if someone can make me charging screen with power button, i will be more than happy. Thanks
Hi everyone i have a xiaomi redmi 3 pro i think because it has 4 gb of ram, and it doesnt on anymore. I was flashing the stock rom with twrp but it block the process, I turned off my phone and now it doesn't on. No fastboot, No recovery, nothing. The screen doesn't on.
I've tried to connect it with the computer, and it shows a "Qualcomm HS-USB QDLoader 9008 (COM 20)" so I've read some guides that made me use the xiaomi flash tool but when I tried to install the global rom but il fails with "cannot receive hello packet"
PLEASE HELP ME I DON'T KNOW HOW TO DO!
leocap33 said:
Hi everyone i have a xiaomi redmi 3 pro i think because it has 4 gb of ram, and it doesnt on anymore. I was flashing the stock rom with twrp but it block the process, I turned off my phone and now it doesn't on. No fastboot, No recovery, nothing. The screen doesn't on.
I've tried to connect it with the computer, and it shows a "Qualcomm HS-USB QDLoader 9008 (COM 20)" so I've read some guides that made me use the xiaomi flash tool but when I tried to install the global rom but il fails with "cannot receive hello packet"
PLEASE HELP ME I DON'T KNOW HOW TO DO!
Click to expand...
Click to collapse
I have very similiar problem with you, i hope someone has a solution
Wikusaurus said:
I have very similiar problem with you, i hope someone has a solution
Click to expand...
Click to collapse
Edit: I've found the solution.
1. go into EDL mode by pressing Power vol+ vol-
2. use miphone 20151028, don't use recent mi flash
3. Flash TWRP
4. Proceed to flash ROM (in my case i use RR Os) via TWRP
Hello, is it possible that I have my phone bricked after a battery replacement?
Heres what happened: I had obviously a battery problem. So I ordered one from ebay and I replaced it. The new battery seem to work, however the phone will not respond to the buttons. Not any buttons. Only if I plug in a cable, mi logo appears for a few seconds and then a big battery bar shows for a few more seconds. Then nothing. (If I put in the old battery and I plug in a cable, the reaction is the same BUT no battery bar appears). The phone does not respond to any buttons like vol +/- holding together with power on, etc. Any help? Thanks, Filip.
Dexaderon said:
Hello, is it possible that I have my phone bricked after a battery replacement?
Heres what happened: I had obviously a battery problem. So I ordered one from ebay and I replaced it. The new battery seem to work, however the phone will not respond to the buttons. Not any buttons. Only if I plug in a cable, mi logo appears for a few seconds and then a big battery bar shows for a few more seconds. Then nothing. (If I put in the old battery and I plug in a cable, the reaction is the same BUT no battery bar appears). The phone does not respond to any buttons like vol +/- holding together with power on, etc. Any help? Thanks, Filip.
Click to expand...
Click to collapse
your battery/connector/header(on mainboard side) seems broken. battery usually does not impact any software. It's better if you open new thread specifically about your problem, so anyone can join to discuss further.
When I tried to root my Ulefone T1 (MT6757T) it got hard bricked. Only Red LED light lights up while plugging USB cable. and also it frequently changes from Vcom, MTP, mode. So, I'm not able to perform a full software flash. The device neither jump to Download/ Fastboot mode and nor to Recovery. Also nothing happens after long pressing power button except toggle sound from PC if it connected to it. Please help me out to unbrick my Ulefone T1.
I do not have that phone but have you tried draining the battery completely? and then give it a light charge see if it goes into download mode using the right button combo?
HisEvilness said:
I do not have that phone but have you tried draining the battery completely? and then give it a light charge see if it goes into download mode using the right button combo?
Click to expand...
Click to collapse
As I saw most MediaTek phones flashes firmware in switch off mode. Mine also it directly catches up by SP flash while in switch off position. I think there will be a universal method for MTK devices. But, I can't find out. Anyway I will try this method. And will update the result soon.
MajjuBhai said:
When I tried to root my Ulefone T1 (MT6757T) it got hard bricked. Only Red LED light lights up while plugging USB cable. and also it frequently changes from Vcom, MTP, mode. So, I'm not able to perform a full software flash. The device neither jump to Download/ Fastboot mode and nor to Recovery. Also nothing happens after long pressing power button except toggle sound from PC if it connected to it. Please help me out to unbrick my Ulefone T1.
Click to expand...
Click to collapse
Any news?
vittore.zen said:
Any news?
Click to expand...
Click to collapse
I opted for another phone.