Related
I've tried to install Cyanogenmod 9 on my Xperia Sola, I've unlocked bootloader official way, flashed kernel from this forum specialy made for sola (http://forum.xda-developers.com/showthread.php?p=28957468&postcount=412 This One), then boot.img of cyanogenmod 9 (FXP203) and...
When I want to do anything with phone, it just flashes my red led. I mean, that led is still on, when I press Power it just turn off. And when I try to connect my phone in fastboot mode, It don't react at all. Can I already throw it away through window?
I put it under a charger to see if it's just off energy, but i've noticed, that after a while, red led just turns off and that's all.
My god, help me or I'll be back on Nokia 3310
You've used the S kernel, not the Sola.
Download the FXP for Sola (Pepper) here;
http://forum.xda-developers.com/showthread.php?t=1876929
Flash boot.img via fastboot. To get in, hold vol up + power. Wait for 3 vibrations.
Hold vol up. Then jam the USB cable in. You should be in fastboot.
Alternatively, flash the stock sola ftf via flashboot.
Problem is, my phone does not react, it does not vibrate, just that red led is on or off. Nothing else. I've tried all of those combinations. I can't get to fastboot mode or anything else.
MelaPL said:
Problem is, my phone does not react, it does not vibrate, just that red led is on or off. Nothing else. I've tried all of those combinations. I can't get to fastboot mode or anything else.
Click to expand...
Click to collapse
Happened to me (I use Xperia GO). What I did is (as mentioned above) - Hold the power button and Volume Up button for sometime (it vibrates once after a few seconds, do not leave the buttons - continue to do so and after a few more seconds until 3 vibrations) and then the phone switches off. Now, hold the Volume Up button and plug in the USB cable - you'd be able to get in the fastboot mode. Flash a stock kernal and that should help.
If your phone is completely down (no charge at all), then above won't help. Plugin the charger and and wait for a few mins (before the red light goes off - you should now have a good knowledge on when the light goes off!) and try then try the above step. Once the 3 vibration comes, remove the charger and go ahead with the flash mode.
Hope this helps!
Thanks,
B.
Edit: By the way, I had my SIM Card and Memory card inserted in the phone when the phone was completely down without any charge. I don't know how, but it makes a difference with you try so (atleast in my case) with them.
If it does not vibrate, then it's a hard brick =\ You need the phone to be at least partially responsive to get into fastboot/flashboot.
Keep holding down. It should vibrate after 25 seconds or so.
Otherwise, you have to bring it to Sony and tell them their phone died on you.
Right now It dosen't even blink with Led. It's totaly down. I cant lock fbootloader, so I'm doomned. Hope that won't cost much...
Install Sony Update Service (SUS) and try to recover your phone from there.
Last shot here, but here's to hoping that the PC at least detects your phone.
Otherwise.... Yeah =\
If you unlocked your bootloader Pc companion will be useless for you cause it will not detect your phone,.,,
i think other way is to flash the stock ftf for you device using flashtool.... that wuld be the best shot for you...
please respond if this fix your problem
No, SUS will detect, but will refuse to flash. It will say "Phone has been modified".
Need to see whether it's a hard brick. If even SUS does not recognise, then bring it to Sony =\
None of the above works. It's just dead and sometimes flashes red light. PC Companion says that there's no phone connected. Hope I will be able to gain a varranty or I'll be on Nokia 3310. But I'm not verry cheerful about that...
Flashtool does not react when I plug in my phone in fastboot or flash.
Hey bro,
Its highly unlikely for hardbrick to happen to Sony phones by flashing a differnt Kernel when Flashtool is there Pretty sure that it ought to work, follow the steps below (Note that the order of usb cable connection is the most important thing as doing it wrong will not allow Flashtool to connect to the phone when its bricked ! )
First, try plugging it in to charger for a while to ensure that there's some charge. Follow up with the Vol and power Button to make sure its turned off. Then after that follow this procedure *exactly*
1) Prepare Flashtool and select the FTF. (Flashmode )
2) When flashtool asks yo to connect the phone, connect the USB cable to PC
3) Then, holding down ONLY the Vol Down button (No Power button, Note that ) connect the phone to the USB cable and in a few seconds, Flashtool will start flashing
I know you tried many variations but missing out on one or the other detail during your previous tries might have caused the lack of success Just try it and let us know what happens
Best of luck and hope you dont have to go to Nokia World !
Cheers
Nope, it's still not working. It just dosent detect phone. I'm pluging in, holding only volume key and I'm waiting 5 minutes - nothing happend.
Nokia 5530 for now, but come one...
Hi,
I am currently having the same problem (I have bricked my sola by flashing with fxp boot.img). After digging the internet I found out that you can start fastboot by:
1. holding all 3 buttons (power on, volume +, volume -)
2. the phone will vibrate
3. the phone will vibrate 3 times
4. release the buttons
5. hold the volume + button and plug in the cable
6. you should be in fastboot now (blue light on)
If fastboot does not work then do 1-4 3x. Good luck! Hopefully we will unbrick our phones
Br,
Wermesz
wermesz said:
Hi,
I am currently having the same problem (I have bricked my sola by flashing with fxp boot.img). After digging the internet I found out that you can start fastboot by:
1. holding all 3 buttons (power on, volume +, volume -)
2. the phone will vibrate
3. the phone will vibrate 3 times
4. release the buttons
5. hold the volume + button and plug in the cable
6. you should be in fastboot now (blue light on)
If fastboot does not work then do 1-4 3x. Good luck! Hopefully we will unbrick our phones
Br,
Wermesz
Click to expand...
Click to collapse
Lol things u get on the internet!!!
First there is no such key combination to start fastboot k so just dun break ur buttons in an attempt to start it ...
Steps 1,2&3 are steps to get ur device force restart and force shutdown and let me tell you one thing
step 1 is wrong it power button and volume + button. That's it first the phone will vibrate once for force restart and if u keep pressing it will bypass over to force shutdown which is indicated by 3 vibrations..
Sent from my Xperia Sola using xda premium
could work
I have a Xperia U and triying to port JB to it I briked two or three times.
I hold power botom and it vibrate and doesnt happen anything ok.?¿
The possible solution could be this(for my works)
Charge the phone like 1 hour for my doesnt charge with the animation but its for security.
With the nest steps you are going to lose all CWM and tweaks and apks but personal data still there.
You have two options:
Flash a new rom with flashtool, but when you pluged with volum - you hold it for allmost all process becose for my i conect to PC and its goes quikly so i cant do annything.
If the phone is not recognised by Flashtool:
You have to repair it with PC Companion or Bridge for Mac, and also the same hold volum - almost all process.
For my it works, tell my if for you works:cyclops::cyclops::cyclops:
Hi,
it worked !
after doing the steps I have posted earlier I managed to flash my xperia sola with the right boot.img (the one from fxp pepper) and install fxp via CWM. Should work for you too.
One tip: you have to remove the assert from fxp installation script.
Br,
Wermesz
@op, your battery is dead and isn't accepting any external charge. Try replacing your battery with a charged one. That is if sola supports user replaceable batteries.
Sent from my ST25i using xda app-developers app
Went to do a wireless update on phone and it crapped out. It's my first android and i've tried everything:
Android drivers download, All MTK Usb Drivers
Sp-Flash, won't work because the phone keeps rebooting and i can't update driver
Put Leagoo firmware version 5 then 8 on sd card and it wouldn't let it install
Flashboot wont work adb will connect through sideload but no help
PdaNetA4150 won't work
I don't think i put it in debugging mode, i remember looking at it and thinking i should check it out some time!
First off all:
Make sure you can get your device turned off: using the Power + Volume up + Volume Down combination
or hold Power for 10 SECS! (count slowly)
or removing the battery (only when it's not integrated!)
Then hold the volume down or volume up while connecting your phone with a USB cable connected to the computer ( this should get you into a sort of flashing mode...)
Reply when this worked plz.
Greetings
MrMaddTraxx
MrMaddTraxx said:
First off all:
Make sure you can get your device turned off: using the Power + Volume up + Volume Down combination
or hold Power for 10 SECS! (count slowly)
or removing the battery (only when it's not integrated!)
Then hold the volume down or volume up while connecting your phone with a USB cable connected to the computer ( this should get you into a sort of flashing mode...)
Reply when this worked plz.
Greetings
MrMaddTraxx
Click to expand...
Click to collapse
Got the phone sorted.....used SP Flash tool, trick was to insert battery as soon as i heard the computer recognise the usb connection, then SP went to work.
Allright , great job!
hi..me also having this kind of problem..after tried to upgrade from wifi..now my phone is dead..how to connect my phone to pc for flash..please describe in detail step...tq...my phone is Leagoo Elite 2...
hello i recently tried to go back to my stock miui rom on my redmi note 3 and therefore downloaded a recovery rom in order to do that...but the thing is all the miui roms for all redmi devices were posted there and i made a huge mistake and downloaded the recovery rom for redmi 3 pro and only after i flashed the rom through recovery and when it didnt start at all i realised my mistake as of now it wont boot into fastboot or recovery..it wont even vibrate when it push the power button..all it does is blink a red light when i connect it to a charging cable...anyone facing anything remotely similar please leave me some answers.
You can try the next thing If the screen is completely black and red blinking led..
Connect USB and look at your PC Device info.
If you see the there the Qualcomm 9008 driver, the phone is in EDL mode and you can flash a better rom with Miflash.
good luck
vish9180 said:
hello i recently tried to go back to my stock miui rom on my redmi note 3 and therefore downloaded a recovery rom in order to do that...but the thing is all the miui roms for all redmi devices were posted there and i made a huge mistake and downloaded the recovery rom for redmi 3 pro and only after i flashed the rom through recovery and when it didnt start at all i realised my mistake as of now it wont boot into fastboot or recovery..it wont even vibrate when it push the power button..all it does is blink a red light when i connect it to a charging cable...anyone facing anything remotely similar please leave me some answers.
Click to expand...
Click to collapse
If your phone is not in eld mode you can do one thing. Hold your phone as you can press both the volume button simultaneously than connect usb cable to pc than first insert micro usb in your device than instantly press both the volume button. If led blinking that means your phone in eld mode
Hi guys
Last week i have buy Redmi 5 plus 3/32 and run normally but suddenly tonight when i use for listening music and view instagram app my redmi 5 plus is dead no respond when long press power button or fastboot key but when i plug into power the led white is blink fast, before i go to service center is anyway i can power on my redmi 5 plus ??
Anyone can help me ??
Thanks
soomat said:
Hi guys
Last week i have buy Redmi 5 plus 3/32 and run normally but suddenly tonight when i use for listening music and view instagram app my redmi 5 plus is dead no respond when long press power button or fastboot key but when i plug into power the led white is blink fast, before i go to service center is anyway i can power on my redmi 5 plus ??
Anyone can help me ??
Thanks
Click to expand...
Click to collapse
Well, it´s difficult to know exactly what cause this sudden dead. When I receive myy device from AliExpress I noted that bootloader was unlocked and when I try to flash through miflash tool (it works with device in fastboot mode) it says permission denied, it means that something was wrong in this unlock-procedure; I don´t know if you purchased in this conditions but this is an alert signal.
I could to enter in fastboot and how was unlocked I flashed TWRP and used a custom rom, but you know if it is a similar case that could help you.
First of all check your battery charge and be sure that you are pressing correctly vol down + pwr at same time without realease any till bunny appears but if you have a locked bootloader you can´t use miflash tool. Also you can try to enter in fastboot at same time that you connecting to charger press vol down.
There is a special mode EDL (download for Xiaomi) that is used to flash a rom without unlock bootloader, of course this method is hidden for any user.
You can Google these two options to enter to EDL mode; Normal method is pressing the three buttons at same time that you connect device to pc till vibrates then release but not always works that.
- Deep cable EDL
- Test Point (you need to open the cover)
Then if succesfull you have to download your fastboot rom image, drivers and also miphone tool (if not the same that miflash tool) this tool works in download mode to flash Xiaomi devices
Hello guys, i have sony xz1 g431, i bricked my phone when i try to install another rom of another device via twrp. Now my phone no light when connect to pc, no light when charging, flash tool doesnt recognize my phone. When i connect my phone to pc it only shows QUSB_BULK on my pc. I think it lost fastboot or something. I try hold down button, up button or both when connect to pc but still no light and nothing happen.
Please help me fix this problem or atleast some good suggestions to solve this problem. I will really happy for that. Thanks :crying:
Just have the phone powered off, hold just only the volume down button and while holding it, connect the phone to usb cable to your PC.
It should enter flash mode (green light), where you can flash stock firmware via newflasher (or possibly also via flashtool, but I do not use that).
If you have the phone off, hold volume up button while connecting to usb, it should enter fastboot (blue light), which also may be used for some recovery, if the phone has been unlocked (or for the unlock itself).
If any of those modes are available, the phone should be possible to recover.
j4nn said:
Just have the phone powered off, hold just only the volume down button and while holding it, connect the phone to usb cable to your PC.
It should enter flash mode (green light), where you can flash stock firmware via newflasher (or possibly also via flashtool, but I do not use that).
If you have the phone off, hold volume up button while connecting to usb, it should enter fastboot (blue light), which also may be used for some recovery, if the phone has been unlocked (or for the unlock itself).
If any of those modes are available, the phone should be possible to recover.
Click to expand...
Click to collapse
i have tried it but there's no light. I think it's dead :crying:
@Karl Einstein, have you tried both ways as suggested above?
Maybe you can examine what usb device appear (if any) in each of the described modes (tried to enter flash mode, tried to enter fastboot mode, tried to just plug the phone to usb without holding any button from power off state).
What happens if you try to enter recovery mode (twrp) - having your phone powered off, without usb connection, holding volume down and power, should enter twrp if you had it flashed before.
Do you get any vibration when hold the power button and.volume.key.up?
Karl Einstein said:
Hello guys, i have sony xz1 g431, i bricked my phone when i try to install another rom of another device via twrp. Now my phone no light when connect to pc, no light when charging, flash tool doesnt recognize my phone. When i connect my phone to pc it only shows QUSB_BULK on my pc. I think it lost fastboot or something. I try hold down button, up button or both when connect to pc but still no light and nothing happen.
Please help me fix this problem or atleast some good suggestions to solve this problem. I will really happy for that. Thanks :crying:
Click to expand...
Click to collapse
Well...I think your phone is dead...I'm really sorry to say that, but in this case, that is the only reasonable explanation.
Yesterday I flashed the GSI image, then tried to flash to eXistenZ, it just stuck in the startup interface. However, it can still enter flash mode and fastboot mode, I have no choice but to use the newflasher to re-flash the firmware, it will return to normal.
In general, Sony devices are hard to change bricks, unless the phone is a Japanese carrier's custom phone (generally can not unlock the bootloader, and can only flash some firmware).
I have seen users who have flashed CE firmware for the docomo version and then can't enter flash mode and fastboot mode.Unlike your device,her phone is totally dead...It can't be charged, and there is no prompt to connect to the computer.
If you can buy a motherboard from eBay or somewhere else,you can disassemble your phone,then replace the old motherboard.
Hope these helps.
Thank you guys for all your support. Finally i decided to skip this problem and i will buy a new device
TimCrownie said:
Well...I think your phone is dead...I'm really sorry to say that, but in this case, that is the only reasonable explanation.
Yesterday I flashed the GSI image, then tried to flash to eXistenZ, it just stuck in the startup interface. However, it can still enter flash mode and fastboot mode, I have no choice but to use the newflasher to re-flash the firmware, it will return to normal.
In general, Sony devices are hard to change bricks, unless the phone is a Japanese carrier's custom phone (generally can not unlock the bootloader, and can only flash some firmware).
I have seen users who have flashed CE firmware for the docomo version and then can't enter flash mode and fastboot mode.Unlike your device,her phone is totally dead...It can't be charged, and there is no prompt to connect to the computer.
If you can buy a motherboard from eBay or somewhere else,you can disassemble your phone,then replace the old motherboard.
Hope these helps.
Click to expand...
Click to collapse
Just a side note , why flash existenz on a gsi rom... As it is made for stock Sony only or did I just misread something..
I had the same issue before on my lenovo p2 it lost fastboot and download mode but the PC detect it as qusb bulk then Qualcomm USB h9008 I searched all solutions but no good I think it needs some kind of box to push the modes or change the mother board. So I changed to Sony instead of repair it
Karl Einstein said:
Thank you guys for all your support. Finally i decided to skip this problem and i will buy a new device
Click to expand...
Click to collapse
Sad to ear that...
I had the same issue with my previous Htc10.
As it was still under warranty, I have had to contact HTC support and told them that and OTA bricked it.
They accepted the issue and replaced the motherboard.
I was BL unlocked, rooted and custom rom when it happened and no issue with support as they had no mean to prove it ?.
If still under warranty try to contact Sony support and tell them the same story... Ota bricks my phone ?
lilbrat said:
Just a side note , why flash existenz on a gsi rom... As it is made for stock Sony only or did I just misread something..
Click to expand...
Click to collapse
I've flashed eXistenZ before flash GSI in my phone. I thought GSI image would cover my origin ROM like eXistenZ, so after flash GSI image in,I flash eXistenZ again.
j4nn said:
Just have the phone powered off, hold just only the volume down button and while holding it, connect the phone to usb cable to your PC.
It should enter flash mode (green light), where you can flash stock firmware via newflasher (or possibly also via flashtool, but I do not use that).
If you have the phone off, hold volume up button while connecting to usb, it should enter fastboot (blue light), which also may be used for some recovery, if the phone has been unlocked (or for the unlock itself).
If any of those modes are available, the phone should be possible to recover.
Click to expand...
Click to collapse
I have the same issue. My sony xperia xz1 G8342 got sudden dead. (Before dead, I remember I disabled "Developer Mode"). Now its not response by any mean except charging sign when i connect to Power source or PC. Xperia Flashtool shows "device connected with USB debugging disabled".
So, How Can I enter flash mode or fastboot mode? Is My phone recoverable? Please Help.
Thanks
Yesterday I was struggling with my XZ1 Compact and came across this thread that gave me some light to get my mobile phone back.
I guess it's way late for Karl now but just in case, I'm sharing my experience. I was working on my device to get LineageOS 18, as I'm a total newbie with roms I followed the different articles that were posted on Getdroidtips for this particular case: Unlocked bootloader, flashed TRWP and installled lineageos. But then I realized it would be good to have Google Play for restoring my files and apps, but when tried to reboot into recovery mode to get Gapps flashed, Black Screen Of Death started.
After that
with the phone plugged to the pc it wasn't recognized as a device (so adb or fasboot where useless)
the only thing the phone reacted to was to press and hold power + volume up (either for reset or power off)
but no matter what, next boot again BSoD
Tried the Xperia Companion but it prompted that repair was not possible as bootloader was unlocked.
Eventually found this life saver
j4nn said:
If you have the phone off, hold volume up button while connecting to usb, it should enter fastboot (blue light), which also may be used for some recovery, if the phone has been unlocked (or for the unlock itself).
Click to expand...
Click to collapse
From there, using fasboot I could reboot the device back with the LineageOS. I was still having issues with recovery boot but I'll post that on a different thread.
Thanks again to everyone for sharing thoughts and tips!