So first of all.
I tried to re-install stock rom on my P9 lite VNS L31 on a 4gig which i realised it was too small.
so i used the Huawei tool kit to load the boot img and the cust.img but the system.img failed. and i locked the phone .
now i cannot go into fastboot mode or bootloader.
I cannot charge the phone as well but it goes on when i plugged in to the charge but doesnt change.
So basically it is stucked on the Huawei Logo Android. doesnt go further. I have the stock rom VNS L31 C185B150
So i know i messed up and i am not sure how to boot the phone pass the logo screen. i did all the tricks all already. Holding both buttons and power button. Plugged it in to the PC and holding the down button for fastboot mode. and still the stuck on the logo screen
is there any ideas that you guys can help me with this please or something to recover the phone becasue it is brickedish
Go to a service centre then
theorganisms said:
Go to a service centre then
Click to expand...
Click to collapse
thanks i took it to the repair shop and they said that the software is loading fulling but stuck on the logo which i am not sure how they know that.
Can it be the LCD that could be stopping it?
Related
Hello,
I have a S3 which is stuck in a bootloop at the samsung logo.
when i turn it on it shows the logo for some seconds then the screen goes black and the logo re-appears.
i can not boot into recovery mode, but download mode is working without a problem every time.
i tried flashing stock firmwares with odin and also tried kies emergency firmware recovery. the flashing always went without any problem, but it had effect. whatever i try, i am never able to boot into recovery and still stuck in the bootloop.
in some tries after flashing the screen just shows the samsung logo forever, but after rebooting it once it then is stuck in a bootloop again (shows the logo - screen goes black - shows the logo...)
i also tried flashing TWRP and CWM via odin, but again i can never boot into recovery mode.
what should i try next?
thx alot for any helpful comment
Varjo said:
Hello,
I have a S3 which is stuck in a bootloop at the samsung logo.
when i turn it on it shows the logo for some seconds then the screen goes black and the logo re-appears.
i can not boot into recovery mode, but download mode is working without a problem every time.
i tried flashing stock firmwares with odin and also tried kies emergency firmware recovery. the flashing always went without any problem, but it had effect. whatever i try, i am never able to boot into recovery and still stuck in the bootloop.
in some tries after flashing the screen just shows the samsung logo forever, but after rebooting it once it then is stuck in a bootloop again (shows the logo - screen goes black - shows the logo...)
i also tried flashing TWRP and CWM via odin, but again i can never boot into recovery mode.
what should i try next?
thx alot for any helpful comment
Click to expand...
Click to collapse
You can Try this:
1.) Pull out battery
2.) Put it in again
3.) Press Vol up + home + power
4.) When the Samsung Logo appears let it off
I think you press the Buttons too long.
I had the same problem!
S1ay3r666 said:
I think you press the Buttons too long.
Click to expand...
Click to collapse
i really tried everything, it's not working. btw with i am stuck at the very first image, where it says "samsung Galaxy sII GT-I9300".
i dont think it's just the way i press the buttons because i can reach it on my s1 and s2 without a problem, it's just not working on this device.
could some setting like "nand erase all" in odin help? in other threads there is sometimes mentioned that the internal file system might be screwed up and in those cases a simple odin reflash does not help anymore...
Nand erase will usually hard brick it. Try the rescue firmware from general forum, sticky thread. Follow the guide exactly as it includes a pit file.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Try the rescue firmware from general forum, sticky thread. Follow the guide exactly as it includes a pit file.
Click to expand...
Click to collapse
thx, but i already did that (multiple times) and flashing via odin always succeeds. then the phone reboots and is stuck at the first samsung galaxy s.. screen. twice i managed somehow to get into recovery (after flashing cwm6) but it then randomly rebooted.
and i dont think that the power button is stuck because when i am in download mode it is perfectly fine it never reboots itself unexpectedly.
Had a similar issue on my tab2 p3100. It all happened when I tried flashing a custom recovery from rom manager.
A bad flash of anything related to recovery or bootloader could be a probable cause.
I remember a knowledge share on one of the threads describing this issue and as mentioned on it all I had to do is this:
1) switch off the device and plug in the charger. This would light up the display showing you the charging status. The status has to show if at least your bootloader part of the phone is fine.
2) plug out the charger and immediately press the three buttons (home + vol up + power) get into recovery mode. This step has to work and help you get to recovery mode.
***Note : the interval within which this step has to be performed is too short since the display would turn off immediately as soon as you plug out the charger. A bit tricky too so you have to be fast. If this misses getting you into recovery, pull out the battery and put it back again. Repeat step1 and 2 again.
3) upon successfully getting into recovery, perform wipe data, cache and select reboot phone from option available on recovery again.
Allow the device to boot. This could take a while since you have performed a data wipe and may prompt for first time set up.
I was able to restore functionality on my tab after these steps and like ppl learn from their mistakes, I then learnt that recoveries and bootloaders are things that needs to be done with a pc only.
Worth a try if you have tried other alternatives and found no go. may help. Who knows..
all the best.
thats also not working. i tried to get into recovery since two days now...
i also tried the steps from this thread: http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
but again, after i flash the cf-root (successfully) the phone does neither boot into recovery by itself nor can i do it by hand...
its crazy... in download mode i can see the model number (GT-I9300) and i thought as long as the model number is there and i can enter download mode there should be a way to recover the device.
but i cannot think of anything to try that i have not done yet
If the rescue firmware didn't help then it looks like the emmc chip is damaged.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
If the rescue firmware didn't help then it looks like the emmc chip is damaged.
Click to expand...
Click to collapse
is there a way to make certain of this? how can i tell if it is really a hardware damage and not just a software brick?
i just dont want to let the phone go, it looks still so shiny
is there anything else that could cause the phone not booting into recovery mode after flashing custom recoveries?
Varjo said:
is there a way to make certain of this? how can i tell if it is really a hardware damage and not just a software brick?
i just dont want to let the phone go, it looks still so shiny
is there anything else that could cause the phone not booting into recovery mode after flashing custom recoveries?
Click to expand...
Click to collapse
http://forum.xda-developers.com/gala...-help-t2737707
Same here, still didn't found how to fix it.. I guess our motherboard just died..
Howewer I have a solution that "almost" worked for me.
Get a stock firmware in odin and turn on Nand erase and T-flash
When it's done phone reboots and you'll see just "Downloading..." mode when you turn it on.
Then got to Kies and Select firmware recovery...
Enter s/n and model name and wait for the flash to complete.
With it , I got past boot logo and actually booted into android but the phone crashed because I guess I have a memory issue..
Well , gl. If you don't find anything else helpful , try going with this method..
So I may have screwed up my phone. I wanted to do a complete fresh install and wiped all the partitions in TWRP (except external and usb).
Then before I got a chance to flash the rom my phone died (didn't realise my battery was low I know my fault).
Now it wont boot past the sony logo and I cant shutdown the phone. holding power does nothing tried holding it for over 30 seconds still nothing.
The phone has been stuck at the sony logo for over an hour and is starting to get very very warm.
Does anyone know how I can shutdown the phone to prevent damaging the battery/cpu? Have I hard bricked the phone? I hope flash tool can detect the phone at the sony logo because I can't shutdown to even boot to flash mode
I Do not have access to a computer at the moment.
Thanks in advance.
BULL3TPR00F said:
So I may have screwed up my phone. I wanted to do a complete fresh install and wiped all the partitions in TWRP (except external and usb).
Then before I got a chance to flash the rom my phone died (didn't realise my battery was low I know my fault).
Now it wont boot past the sony logo and I cant shutdown the phone. holding power does nothing tried holding it for over 30 seconds still nothing.
The phone has been stuck at the sony logo for over an hour and is starting to get very very warm.
Does anyone know how I can shutdown the phone to prevent damaging the battery/cpu? Have I hard bricked the phone? I hope flash tool can detect the phone at the sony logo because I can't shutdown to even boot to flash mode
I Do not have access to a computer at the moment.
Thanks in advance.
Click to expand...
Click to collapse
Hold Power and Volume Up. That should shut the phone off. If that doesn't work, try the off switch next to the USB Port.
When you do get access to a computer, download SUS and do a software repair to restore your phone to stock (only for locked bootloader). Alternately, you can download a stock .ftf file for your Z2 and flash it via flashtool.
Your phone is not hard-bricked, it is soft bricked. Hard Bricked means that the phone turns into an expensive paperweight dummy handset.
Hope this helps
BULL3TPR00F said:
So I may have screwed up my phone. I wanted to do a complete fresh install and wiped all the partitions in TWRP (except external and usb).
Then before I got a chance to flash the rom my phone died (didn't realise my battery was low I know my fault).
Now it wont boot past the sony logo and I cant shutdown the phone. holding power does nothing tried holding it for over 30 seconds still nothing.
The phone has been stuck at the sony logo for over an hour and is starting to get very very warm.
Does anyone know how I can shutdown the phone to prevent damaging the battery/cpu? Have I hard bricked the phone? I hope flash tool can detect the phone at the sony logo because I can't shutdown to even boot to flash mode
I Do not have access to a computer at the moment.
Thanks in advance.
Click to expand...
Click to collapse
Force reset it like here: http://userguide.sonymobile.com/ref...product=xperia-z1#!Resetting-your-device.html
and do a factory reset. Go to recovery -> wipe data/ factory reset.
EDIT: or flash again your rom / kernel.
HussainQ said:
Hold Power and Volume Up. That should shut the phone off. If that doesn't work, try the off switch next to the USB Port.
When you do get access to a computer, download SUS and do a software repair to restore your phone to stock (only for locked bootloader). Alternately, you can download a stock .ftf file for your Z2 and flash it via flashtool.
Your phone is not hard-bricked, it is soft bricked. Hard Bricked means that the phone turns into an expensive paperweight dummy handset.
Hope this helps
Click to expand...
Click to collapse
You are a life saver bro I been trying to figure out how to force off the phone for an hour tried every button combo except volume up for some reason (think I tried it but didnt work prolly wasn't actually pushing the button)
yeah I'm familiar with sus and flashtool so I should be good from here out just needed to figure out how to force the damn thing off. I been out of the sony game too long ive been with samsung since my x10 but now im back
Thanks again bro just happy its a soft brick.
Hello,
Im new here and im not sure if here is the correct place to ask questions but,
I have a Huawei Y5 II and i was trying to put android 6.0 or higher but i had alot of problems.
I first unlocked my bootloader and then installed a custom recovery TWRP and CWM on it, but i never succeeded in booting into one of them.
What happened is that i saw in a post here on xda that with a certain command in fastboot mode i can remove the custom recoveries ( because they didnt work at all) but when i did it i ended up formatting my whole system,cache and boot.
Now my phone just stays on the huawei logo when i turn it on and nothing else.
i tried to install a custom recovery again throught the fastboot mode using adb on my pc, but when i press the vol up+ power my phone just keeps restarting and restarting and staying on the logo.
Thanks in advance for your time spent on reading my problem i just wanna use my phone again cuz i love it. <3
Hi, try to flash latest stock firmware for SD update here is example but do for your model and region !!!
http://huawei-firmware.com/rom/huawei-y5ii/cunu29/1719
Good Luck
Thanks you, but i would do that if i had access to my recovery!
If i press the keys my phone just restarts and restarts until i let the keys off, then again... just the logo.
my phone still is in warranty and i can give it to my distributor so their service fixes it.... but i dont really want that.. i just wanna fix it and use it as before.
well..
i had my phone to service and i got it fixed for 100 bucks. :/ i really am a sadman
Lg g5 dead while ota update installation.
Everything I plug in a charger or press power button, lg logo appears and then a black screen with an error on top left corner.
After 1-2 seconds phone would restart and goes through this never ending loop.
Phnoe does boot into the recovery mode and except that I'm not sure about anything.
Got it checked at multiple locations but still no luck.
Had this phone laying around for over a year now in same condition.
Don't know what can be done.
Please help!
I'm not sure about the model number but in the inside of back door and on the charging port brick it says Ls992.
hmmm... if i were you, i will just go to flash TWRP recovery and then i custom rom OR even stock rom. I mean, your rom seems completely vanished, so just go to the many guides there are out there, to unlock bootloader, and flash TWRP and a rom
You can probably still boot it into fastboot or download mode, you could try flashing TWRP recovery in fastboot, or the stock firmware .KDZ in download mode.
Yes, fortunately you are only soft bricked. You can boot into download mode and reflash with lgup.
Hello, so my phone is stuck in an infinite bootloop orange statefrom unlocking the bootloader and flashing the wrong version of TWRP....... It is a Wiko Tinno, SAS, U307AS... These are the names ive found looking for help. Its a government phone from assurance wireless... But basically i got this hone from my girlfriend i thought it was a wiko ride.... 30 minutes after given this phone i got it stucl in bootloop xD i found a tutorial on here i beleive to root a wiko ridge.... i unlocked the bootloader.... tried to install TWRP once, the phone rbooted to the setup as it factory reset from the bootloader unlock but when i went to recovery TWRP wasnt there.... Why? because it wasnt the right version for my phone..but as i am a little on the slow side i tried it again..... thats when it wouldnt even boot passed the orange state logo screen.... and since i tried to install a cust recovery guess what? i cant get into recovery mode..... the phone freezes and reboots back into bootloop. unlocking the bootloader im pretty sure assurance wireless wont like it and probably wont replace it..... i have been searching the internet and ive tried most things ive found ive tried flash tools sdk tools mtk tools flashing scatter files etc etc... i try and search for a way to fix it every couple days... its been about 3 months now.... im kind of running out of patience ive went as far as opening the back and replugging most of the films in hopes it would reset something to make it work.. if anyone has any ideas or anything please i would love to know...... on phone specs its tinno U307AS assurance its wiko life 2 and some weird gov. phone website its wiko SAS idk..
IMHO you're advised to re-flash phone's Stock ROM by means of Wiko Phone Flash Tool.
jwoegerbauer said:
IMHO you're advised to re-flash phone's Stock ROM by means of Wiko Phone Flash Tool.
Click to expand...
Click to collapse
i have. i just tried again. i cannot find a firmware or stock rom for my device. i have even tried to usea mt6739 scatter file.
im no beginner to phones here..but im seriously stumped.
Maybe this helps:
Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
jwoegerbauer said:
Maybe this helps:
Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
Click to expand...
Click to collapse
i fully charged my phone to test it out sadly it hadnt worked :\
Here ya go: https://rootmygalaxy.net/download-wiko-stock-firmware/
So I am having same issue after attempting to flash boot.img and now I cant access fastboot mode recovery mode I cant even hard reset it plus now I cant even get computer to recognize device HELP!!!