Related
I accidentally flashed a Retail US version on my Moto Z Retail EU, and now I am having a "bad key" at the Warning on boot up. Can someone provide me with a 7.1.1 or 7.0 link for Retail EU for the XT1650-03? It's for the normal Moto Z, not Play or Force. I NEED an Retail EU Boot as I flashed a wrong one and I cannot go back to 6.0.1 to fix it, so my Boot is broken until someone gives me a proper EU one for 7.0 or 7.1.
Thanks in advance!
Note: I am getting this when trying to flash the "XT1650-03_GRIFFIN_7.0_NPLS25.86-17-3-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC" files:
D:\MAIN FOLDER\Android\Moto Z\XT1650-03_GRIFFIN_7.0_NPLS25.86-17-3-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml\GRIFFIN_NPLS25.86-17-3-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml>fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (32768 KB)...
OKAY [ 0.078s]
writing 'boot'...
(bootloader) Image signed with key bad key
OKAY [ 0.805s]
finished. total time: 0.885s
So yeah, I need a boot image that isn't signed with a bad key for RETEU.
Fixed. Flashed a Retail US 7.0 STOCK ROM even though it said "bad key", and then I flashed erfanoabdi's "Stock" 7.1.1 ROM which flashed a working boot.img that doesn't cause this problem.
Thread closed.
i have same problem bro but i didn't understand your solved please help me
i have same problem bro but i didn't understand your solved please help me
anatete404 said:
i have same problem bro but i didn't understand your solved please help me
Click to expand...
Click to collapse
Flash this: https://forum.xda-developers.com/moto-z/development/rom-erfanrom-flashable-zip-t3646962
yanniclord said:
Flash this: https://forum.xda-developers.com/moto-z/development/rom-erfanrom-flashable-zip-t3646962
Click to expand...
Click to collapse
ok i will try flash it tomorrow but my phone still say bad key and didn't star i flash 7.0 with erorr and 6.0 with erorr
i see erorr bootloader not found when i flash with fastboot i mean my phone didn't boot in recovery or normal just fastboot
I am not understanding most of what you are saying, but I can prepare a little .zip with everything you need for you. I make a .bat file that you need to run which should do all the work for you.
anatete404 said:
...
Click to expand...
Click to collapse
Alright, here. Make sure that you have ADB installed System-Wide on your PC, you can use ADB-AIO for that if you don't have ADB and Fastboot Tools installed yet.
Anyways, once you have that, download my .rar file (Yes, .rar, install WinRAR if you don't have it, I won't use .zip in order to compress much more and save space and download time for you), and then run the "Moto Z Automated Flash.bat" file, it should do everything for you, but make sure to READ what I wrote in it, when it asks you to "Press Enter", please READ everything carefully, I will NOT explain further here, everything that you need to know is described and explained to you while you use the "Moto Z Automated Flash.bat" file as a form of guide.
In case you wonder, it is 3.5GB large because it contains the STOCK 7.0 ROM for the Moto Z (that you will flash first), and then the 7.1.1 ROM from erfanoabdi that you will flash through TWRP. It also contains TWRP (which will be flashed during the guide/bat file) and a logo.bin that covers over the stupid "N/A" at bootup.
RAR file download:
https://mega.nz/#!M9kCDQRQ!184HVnma8xGi1m0llqWcSSTdcYjLb9hToRSx0BkqwfI
i flash your rom bro when i flash i cant get recovery only fastboot please help me
try another Kernel flashing by TWRP https://forum.xda-developers.com/devdb/project/?id=17677#downloads
anatete404 said:
i flash your rom bro when i flash i cant get recovery only fastboot please help me
Click to expand...
Click to collapse
Would you please try to at least speak a little proper English and use punctuations, it's really hard to read.
i need flash for my phone i upload problem and info i am sorry about english but please help me
anatete404 said:
i need flash for my phone i upload problem and info i am sorry about english but please help me
Click to expand...
Click to collapse
Here is the latest official full firmware with october patch:
https://androidfilehost.com/?fid=889964283620761640
thx bro but this https://androidfilehost.com/?fid=889964283620761640
working to my info phone i uploaded photo
Benoe said:
Here is the latest official full firmware with october patch:
https://androidfilehost.com/?fid=889964283620761640
Click to expand...
Click to collapse
Hey your link doesn't work anymore. Is it for 7.0+ and RETEU? If so, please send it to me !
yanniclord said:
Alright, here. Make sure that you have ADB installed System-Wide on your PC, you can use ADB-AIO for that if you don't have ADB and Fastboot Tools installed yet.
Anyways, once you have that, download my .rar file (Yes, .rar, install WinRAR if you don't have it, I won't use .zip in order to compress much more and save space and download time for you), and then run the "Moto Z Automated Flash.bat" file, it should do everything for you, but make sure to READ what I wrote in it, when it asks you to "Press Enter", please READ everything carefully, I will NOT explain further here, everything that you need to know is described and explained to you while you use the "Moto Z Automated Flash.bat" file as a form of guide.
In case you wonder, it is 3.5GB large because it contains the STOCK 7.0 ROM for the Moto Z (that you will flash first), and then the 7.1.1 ROM from erfanoabdi that you will flash through TWRP. It also contains TWRP (which will be flashed during the guide/bat file) and a logo.bin that covers over the stupid "N/A" at bootup.
RAR file download:
https://mega.nz/#!M9kCDQRQ!184HVnma8xGi1m0llqWcSSTdcYjLb9hToRSx0BkqwfI
Click to expand...
Click to collapse
Hi,
I tried to unlock bootloader following instruction on Motorola website then my moto z play has "BAD KEY" and keep restarting with that message on the screen. I found and used your file but it didn't help my device out of the "BAD KEY". Please help. Thank you
Hi, I'm going to unlock my bootloader. Install Xiaomi EU Rom and Root with Magisk.
After unlocking bootloader, i know my device will vulnerable. Anyone can flash a custom recovery and install a backdoor or whatever. So, I have two Idea to eliminate this threat.
1) Is there any way to sign the image manually with custom key and lock the bootloader again? and then i can unlock it from PC whenever I want with my own key.
I don't know if such thing is possible, there is a post related to it.
How to create a custom signed vbmeta.img for Unisoc using AVBtool
2) If first option is not possible, is there any way to generate the hash of /system partition, keep the key inside phone (/data maybe? as it will be encrypted), and then every time system boot up, it will generate a new hash and check with original one, to confirm system integrity. (someone mentioned such thing in this forum, but he didn't tell the procedure). I know it will take a long time to check, but I don't mind.
Another way could be, check it manually inside OS or from PC (adb maybe?) whenever I give my phone to someone and suspect something.
I know my post is messed up. I would appreciate any help.
OSX.Nobody said:
1) Is there any way to sign the image manually with custom key and lock the bootloader again? and then i can unlock it from PC whenever I want with my own key.
I don't know if such thing is possible, there is a post related to it.
How to create a custom signed vbmeta.img for Unisoc using AVBtool
Click to expand...
Click to collapse
Only Android 8.0 and higher ROMs with AVB implemented have 1 or more VerifiedBoot image(s) - read: vbmeta.img .
How to sign an image with a custom key is explained here.
jwoegerbauer said:
Only Android 8.0 and higher ROMs with AVB implemented have 1 or more VerifiedBoot image(s) - read: vbmeta.img .
How to sign an image with a custom key is explained here.
Click to expand...
Click to collapse
I have read that post, but it's 3 years old. Also he mentioned about Pixel Phone.
My ROM is Android 10 (MIUI 12 EU Rom), Redmi K30i 5G device. Will it work for me? Also what about 2nd option, any Idea?
Thanks.
@OSX.Nobody
The vbmeta.img on Android ROMs with AVB implemented is nothing else than a database. It actually contains the hashes/keys for the boot, system, and vendor partitions, that does mean that every such ROM build will need a unique vbmeta.img used by AVB to verify successfully.
A vbmeta.img is ROM related, it's completely independent of Android device's hardware.
jwoegerbauer said:
@OSX.Nobody
The vbmeta.img on Android ROMs with AVB implemented is nothing else than a database. It actually contains the hashes/keys for the boot, system, and vendor partitions, that does mean that every such ROM build will need a unique vbmeta.img used by AVB to verify successfully.
A vbmeta.img is ROM related, it's completely independent of Android device's hardware.
Click to expand...
Click to collapse
Thanks for your help, I will follow that post.
Flash at your own risk. I am not responsible for any damage or data loss to the device during this process!
Downloads:
The Fastboot restoration file can be downloaded in here:
DN2103_11_A.07
DN2103_11_A.10 *deleted
DN2103_11_A.11 *deleted
please use ota files to upgrade
File folder on MEGA
mega.nz
include Flash Root & TWRPinstaller
tool for Windows (.bat)
Special Thanks: @HofaTheRipper @phhusson
Caution! Please check your version on your mobile phone before flashing. these files may only be used for V07!If you want to upgrade, use the ota files here.
Oneplus Nord 2 Oxygen 11.3 DN2103_11_A.10 EEA ROM
Flash at your own risk. I am not responsible for any damage or data loss to the device during this process! Downloads: The Fastboot restoration file can be downloaded in here: https://mega.nz/folder/bMwxRCKb#E_ZX3TfA9hhbuODHMquxDA include...
forum.xda-developers.com
before flashing
Backup your nvcfg.img, nvdata.img, nvram.img, persist.img, proinfo.img, protect1.img and protect2.img with Partition Backup from Playstore
Partitions Backup & Restore - Apps on Google Play
Backup your important partitions to avoid any data or IMEI corruption
play.google.com
Interesting! Could I ask what ROM this is?
Eastw1ng said:
Interesting! Could I ask what ROM this is?
Click to expand...
Click to collapse
Hi, this is Oxygen OS .. I forget it in the Title Thanks
11.3.A07 EEA and11.3.A10 EEA
After doing this, will the updates come from oneplus as usual?
xirosiman said:
After doing this, will the updates come from oneplus as usual?
Click to expand...
Click to collapse
Yes, but i not test to Upgrade
sakarya1980 said:
Hi, this is Oxygen OS .. I forget it in the Title Thanks
11.0.3.A07 EEA
Click to expand...
Click to collapse
Hey thanks for the reply, my question was mostly if this is the stock rom for the oneplus nord 2, or is this a different rom made compatible?
Eastw1ng said:
Hey thanks for the reply, my question was mostly if this is the stock rom for the oneplus nord 2, or is this a different rom made compatible?
Click to expand...
Click to collapse
Stock, not custom
sakarya1980 said:
Yes, but i not test to Upgrade
Click to expand...
Click to collapse
I tested. You must flash without root, then can you upgrade @xirosiman
Flash at your own risk. I am not responsible for any damage or data loss to the device during this process!
OTA files here (put this files to your OTG)
File folder on MEGA
mega.nz
Click to expand...
Click to collapse
Stock boot.img https://mega.nz/folder/fZx2nBaR#Q33lJstFRMQg6_0j7Z0TJw
Click to expand...
Click to collapse
Please use this commands
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta2.img
Fastboot flash boot nord2_stock_boot_A07.img
ok i managed to make it run.
when all is done, it can not boot.
i managed to flash the boot.img from the other thread in order to make it run.
xirosiman said:
ok i managed to make it run.
when all is done, it can not boot.
i managed to flash the boot.img from the other thread in order to make it run.
Click to expand...
Click to collapse
You must flash vbmeta2 then boot.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta2.img
Do you try v10? You can not flash from v7 to v10 and please check your driver
ok i have done it. Somehow the wifi toggle wasnt working but after flashing vbmeta and boot its ok.
i managed to go to A7 stock and now is updating to A10.
One thing i noticed, the combination of volume down and start button has changed only to fastboot.
And the only way to go to recovery is from command
also it can not recognise the sim cards
and the updade through ota is failed. it can not verify says
xirosiman said:
ok i have done it. Somehow the wifi toggle wasnt working but after flashing vbmeta and boot its ok.
i managed to go to A7 stock and now is updating to A10.
One thing i noticed, the combination of volume down and start button has changed only to fastboot.
And the only way to go to recovery is from command
also it can not recognise the sim cards
and the updade through ota is failed. it can not verify says
Click to expand...
Click to collapse
You can't update from 7 to 10. You must flash ota file with v9, then Upgrade to 10.
Wlan and Bluetooth works, after flash v7 again
Here ota files
https://mega.nz/folder/rQhhHQpA#nNHvPlmzBXwPjmaFpuDa2Q
Please put both file to your otg storage and flash it, with stock recovery. Every time after flash vbmeta2
You can start recovery with fastboot reboot recovery
Downgrading from 10 to 7 was not successful. Even if the rom works it can not recognise the sim cards.
Now i am flasing 10 to see if it works
during flashing its says "Invalid sparse file format at header magic" do this has something to do with drivers?
xirosiman said:
Downgrading from 10 to 7 was not successful. Even if the rom works it can not recognise the sim cards.
Now i am flasing 10 to see if it works
during flashing its says "Invalid sparse file format at header magic" do this has something to do with drivers?
Click to expand...
Click to collapse
dont abort this. Invalid sparse file format at header magic" is normal, but you must wait ...
sakarya1980 said:
Flash at your own risk. I am not responsible for any damage or data loss to the device during this process!
Please use this commands
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta2.img
Fastboot flash boot nord2_stock_boot_A07.img
Click to expand...
Click to collapse
Did a full upgrade from stock 07 to 09 then 10, went perfectly.
Thanks Sakarya!
Eastw1ng said:
Did a full upgrade from stock 07 to 09 then 10, went perfectly.
Thanks Sakarya!
Click to expand...
Click to collapse
Hi, good ota flash 07 to 09?
Yeah OTA flash from 07 to 09, then a flash from 09 to 10 and followed up with the rooted boot image to make sure everything was as you described. Works flawlessly!
Is there any way to flash the ROM without fastboot? I bricked the phone and I'm unable to get to fastboot.
Update tonOxygen 11.3 DN2103_11_A.10 EEAinclude Flash Root & TWRPinstaller
tool for Windows (.bat)
[RECOVERY][UNOFFICIAL] TWRP 3.5.2_11-0 for OnePlus Nord 2 5G [denniz]
https://forum.xda-developers.com/t/...-2_11-0-for-oneplus-nord-2-5g-denniz.4335021/
Received the tablet in the mail, and now looking to root via Magisk (and ideally a custom recovery like TWRP).
I found this video describing a way to download the stock ROM from Teclast:
Has anyone achieved root on this device? Can anyone confirm Treble ROM compatability for GSI A/B?
On the russian forum 4pda somebody posted the patched boot.img and vbmeta.img files required for rooting.
If anyone is registered on the forum he might try to grab the files, for me it gives 404 error when trying to download, though im not registered..
Teclast T40 Plus - Обсуждение - 4PDA
Teclast T40 Plus - Обсуждение, Планшет, 10,4
4pda.to
NightLord said:
On the russian forum 4pda somebody posted the patched boot.img and vbmeta.img files required for rooting.
If anyone is registered on the forum he might try to grab the files, for me it gives 404 error when trying to download, though im not registered..
Teclast T40 Plus - Обсуждение - 4PDA
Teclast T40 Plus - Обсуждение, Планшет, 10,4
4pda.to
Click to expand...
Click to collapse
Good find, but the link no longer works. It gives me a 404: https://4pda.to/forum/dl/post/24458874/T40_Plus_root.7z
My guess is it would work if we were logged in, its just that i cant create an account since i cannot get past rhe russian captcha
Yeah, I also can't register without knowing the Russian keyboard layout and how to identify the characters. Perhaps someone with this knowledge can register and attach the required images to root here?
Slightly off topic while someone manages to grab the files from 4pda
Do you actually get 50000+ gpu score in antutu with the t40? I have the maxpad i11 which is in theory the same hardware, and I only get 42000. I even flashed the t40 firmware on the device, but gpu score didnt budge.
To be on topic: if you want root, you may also flash phhuson's treble GSI rom-s. I tried his version of android 12, and it works, and has root.
NightLord said:
Slightly off topic while someone manages to grab the files from 4pda
Do you actually get 50000+ gpu score in antutu with the t40? I have the maxpad i11 which is in theory the same hardware, and I only get 42000. I even flashed the t40 firmware on the device, but gpu score didnt budge.
To be on topic: if you want root, you may also flash phhuson's treble GSI rom-s. I tried his version of android 12, and it works, and has root.
Click to expand...
Click to collapse
These ROMs? https://github.com/phhusson/treble_experimentations/releases
ForgottenSolstace said:
These ROMs? https://github.com/phhusson/treble_experimentations/releases
Click to expand...
Click to collapse
Yes.
You can either install them via DSU as dual-boot OS beside your stock rom, or just flash system partition (inside super) via fastbootd (you are going to have to delete product partition to have enough space inside super for the system image) and use them as primary OS.
Gotcha:
Just ordered a T40 Plus, did you manage to get root?
Flashing the boot and vbmeta partitions with the images attached to my previous post will grant you root on the stock t40 plus firmware.
I myself moved on to using android 12 gsi images.
NightLord said:
Flashing the boot and vbmeta partitions with the images attached to my previous post will grant you root on the stock t40 plus firmware.
I myself moved on to using android 12 gsi images.
Click to expand...
Click to collapse
Hi NightLord, can you explain easily the root steps for this device? do we need the software that we see in the video at the beginning or is ADB enough?
Marynboy78 said:
Hi NightLord, can you explain easily the root steps for this device? do we need the software that we see in the video at the beginning or is ADB enough?
Click to expand...
Click to collapse
Hey,
You need to use the spreadtrum research download tool (RDT), not the one seen in tthe video in the first post.
See this guide on how to use the RDT.
The basic concept is that you need to download the official firmware from the teclast homepage, load it into RDT, uncheck all partitions (save for those that are compulsory and cannot be unchecked), select only boot and vbmeta partitions, and as images to be flashed you need to browse the ones found in the archive I posted, instead of those found in the original firmware package.
Begin flashing, your device will perform a hard reset, and then you should boot into rooted firmware.
Theoretically you should be able to flash both partitions (boot and vbmeta) via fastboot too, but when I tried, i got an error message saying boot.img was too large or something. Flashing via RDT went without problem. The only caveat is that flashing via RDT will always hard reset your device.
NightLord said:
Flashing the boot and vbmeta partitions with the images attached to my previous post will grant you root on the stock t40 plus firmware.
I myself moved on to using android 12 gsi images.
Click to expand...
Click to collapse
How to install android 12 gsi on this device?
marinzrncic said:
How to install android 12 gsi on this device?
Click to expand...
Click to collapse
First you need to unlock the bootloader. You need to be patient when you are flashing the unlock, my device took some 10 mins to complete, but in the end it succeeded (on the 2nd try, mind you.)
Here is a guide for unlocking in windows, though it is in russian (Im attaching the required modified fastboot in case you cannot download it from 4pda).
When you're done unlocking the bootloader, you've already done the hard part.
Next, download your preferred GSI image from Google, from phhusson's, or whatever else you find (Pixel Experience for eg.). Mind you, that the image from Google contains the Android 12L version.
Next you will flash your active system partition with the GSI image. To do that, initate ADB connection to your tablet, then enter fastbootd, by issuing the command:
fastboot reboot fastboot
you can check your active system slot by:
fastboot getvar all (but it will be slot "a" unless you have received an OTA update previously)
you need to free up some space by deleting the logical partition product otherwise you wont be able to flash your gsi:
fastboot delete-logical-partition product_a
(in case your active slot is "a")
then you can move forward to actually flashing your GSI:
fastboot flash system_a whateverisyourimagefilename.img
Lastly, you will need to wipe userdata, which can be done on the tablet by switching to recovery from fastbootd, and then selecting wipe userdata, or maybe the fastboot -w command does the same.
Reboot, and enjoy your GSI.
I'm using the Google 12L GSI, and it is perfectly stable for daily usage. For bluetooth audio to work, you will have to disable bluetooth a2dp hardware offload in developer options.
NightLord said:
First you need to unlock the bootloader. You need to be patient when you are flashing the unlock, my device took some 10 mins to complete, but in the end it succeeded (on the 2nd try, mind you.)
Here is a guide for unlocking in windows, though it is in russian (Im attaching the required modified fastboot in case you cannot download it from 4pda).
When you're done unlocking the bootloader, you've already done the hard part.
Next, download your preferred GSI image from Google, from phhusson's, or whatever else you find (Pixel Experience for eg.). Mind you, that the image from Google contains the Android 12L version.
Next you will flash your active system partition with the GSI image. To do that, initate ADB connection to your tablet, then enter fastbootd, by issuing the command:
fastboot reboot fastboot
you can check your active system slot by:
fastboot getvar all (but it will be slot "a" unless you have received an OTA update previously)
you need to free up some space by deleting the logical partition product otherwise you wont be able to flash your gsi:
fastboot delete-logical-partition product_a
(in case your active slot is "a")
then you can move forward to actually flashing your GSI:
fastboot flash system_a whateverisyourimagefilename.img
Lastly, you will need to wipe userdata, which can be done on the tablet by switching to recovery from fastbootd, and then selecting wipe userdata, or maybe the fastboot -w command does the same.
Reboot, and enjoy your GSI.
I'm using the Google 12L GSI, and it is perfectly stable for daily usage. For bluetooth audio to work, you will have to disable bluetooth a2dp hardware offload in developer options.
Click to expand...
Click to collapse
thank you very much
NightLord said:
Hey,
You need to use the spreadtrum research download tool (RDT), not the one seen in tthe video in the first post.
See this guide on how to use the RDT.
The basic concept is that you need to download the official firmware from the teclast homepage, load it into RDT, uncheck all partitions (save for those that are compulsory and cannot be unchecked), select only boot and vbmeta partitions, and as images to be flashed you need to browse the ones found in the archive I posted, instead of those found in the original firmware package.
Begin flashing, your device will perform a hard reset, and then you should boot into rooted firmware.
Click to expand...
Click to collapse
Did we need unlock bootloader first or we can flash root without unlock bootloader?
Thx
ardianz said:
Did we need unlock bootloader first or we can flash root without unlock bootloader?
Thx
Click to expand...
Click to collapse
I have no idea because I havent tried yet. But I would guess it might be possible that you can flash the patched boot.img along with vbmeta.img with RDT, and it might work, if they do pass Android Verified Boot check.
NightLord said:
Gotcha:
Click to expand...
Click to collapse
will these files work on android 10 or android 11? I have a unisoc T618 and unisoc T310. I was hoping to flash both tablets to get root access.
and also do you have a twrp for T40_plus or any unisoc generic twrp?
So Ive never thought about or had anyone around me ever talk about android developers or enthusiasts or whatever it is... the past few years I ran into quite a few issues that ive needed root.. so I tried researching and trying to learn and well.. i should of maybe hopped on here before i did the actual attempt... SO heres my **** up!
I unlocked my bootloader... then followed a guide and I had tried flashing a img without flashing twrp and magisk and so now I figured out how to boot into recovery, twrp... and flashed magisk and then I tried installing no verity opt encrypt 6.1 and it states failed then i started moving around through twrp and tried mounting data and it will not even highlight the data checkbox and wont let me repair the data under the wipe command and wont let me change it to any of the extensions? no os found it says it wont let me format userdata says this.
fastboot: error; cannot generate image for userdata
please if you can help me out... any help would be greatly appreciated and would be lifesaving... thx
I am new to trying out this kind of stuff i believe i flashed possibly the wrong boot img! before I had flashed twrp and well i was stuck in fastboot.. but managed to get twrp and then flashed magisk and tried flashing no verity opt encryption but it will not flash I'm unable to mount the checkbox data in mount It wont even highlight the checkbox... i go to try to wipe some partitions and the only one it lets me wipe is metadata... I've tried format and It said failed to generate userdata partition and then i = tried fastboot erase userdata it worked tried erase/format cache it didn't work so any help at this would be greatly appreciated... thanks for your time
Re-flash phone's Stock ROM to get rid off of all modifications you applied so far.
so just download original stock rom to my computer into the file that holds adb and fastboot and then flash it and then reboot and it should work?
You shouldn't post duplicate threads.. I noticed you already had one the same day a few hours earlier for the same thing.. You might want to read the rules before posting to avoid any issues.
@Learnitright Hello, as mentioned above, please do not make duplicate threads with same topic. All replies from other users can be on this thread.
I have merged another thread by you into this one. Thanks.
I am sorry i wasnt sure if the first one went through or not I am stuck with a slow computer isnt very good im just trying to fix my phone.. If anyone could help?
You need stock-ROM and msm-tool, sadly metro version stock-ROM might not available for public right now. You should have used
Code:
fastboot boot twrp-n200.img
instead of flash recovery.
kdm6389 said:
You need stock-ROM and msm-tool, sadly metro version stock-ROM might not available for public right now. You should have used
Code:
fastboot boot twrp-n200.img
instead of flash recovery.
Click to expand...
Click to collapse
even if its just named recovery.img in the folder where i open up the command prompt ? sorry im so new to this
try msm-tool with TMO-Stock-ROM, maybe yout phone become TMO from Metro.