[MOD] 4K 60/30FPS HDR10 Video Recording - Xiaomi Poco F1 Themes, Apps, and Mods

4K HDR10 Video Recording using MIUI Camera.​
Requirements:
Unlocked bootloader
MIUI Global Beta/EU 9.3.1
TWRP/custom recovery
Instructions:
1.Download the mod zip from here
2.Open Settings and make sure that you are running MIUI Global Beta 9.3.1 (minimum)
3.Reboot to your custom recovery (for example TWRP) and flash the mod zip that you downloaded, after that is ready boot back in MIUI
4.Open MIUI Camera and go to video mode then settings.From there change your quality to 4K 60 or 30 FPS and set your video encoder to H.265 High Performance. All the videos that you recorded will be in HDR10 and to view them use compatible app like Google Photos or MX Player
Note:
To remove the mod flash the official 9.3.1 camera libs by amog787
Credits:
Defcomg(Savitar) for modding the libs and making that possible
Video sample

---

RESERVED
Updated stock libs to fix issue where u can't revert and gcam fails.

---

Will it works on mi8se?
Wysłane z mojego MI 8 SE przy użyciu Tapatalka

---

this mod also affect gcam

---

So no suport for custom roms right?
Sent from my Xiaomi Poco F1 using XDA Labs

---

sannn111ty said:
4K HDR10 Video Recording using MIUI Camera.​
Requirements:
Unlocked bootloader
MIUI Global Beta/EU 9.3.1
TWRP/custom recovery
Instructions:
1.Download the mod zip from here
2.Open Settings and make sure that you are running MIUI Global Beta 9.3.1 (minimum)
3.Reboot to your custom recovery (for example TWRP) and flash the mod zip that you downloaded, after that is ready boot back in MIUI
4.Open MIUI Camera and go to video mode then settings.From there change your quality to 4K 60 or 30 FPS and set your video encoder to H.265 High Performance. All the videos that you recorded will be in HDR10 and to view them use compatible app like Google Photos or MX Player
Note:
To remove the mod flash the official 9.3.1 camera libs by amog787
Credits:
Defcomg(Savitar) for modding the libs and making that possible
Video sample
Click to expand...
Click to collapse
Tried using it. Didn't like it, so I flashed the Official Camera libs so that I can get back to default and this what happens. The Photo lagging, the GCam Photo is displaying over saturated preview (not the pictures).
- MIUI EU 9.3.1
---------- Post added at 08:31 PM ---------- Previous post was at 08:05 PM ----------
cediedc said:
this mod also affect gcam
Click to expand...
Click to collapse
Did you had a over saturated previews at gcam?

---

This doesn't seem to be hdr10, just an oversaturated video

---

Is there an app that detects if a video is indeed an hdr10 video?

---

what is HDR10 ?

---

If you use stock cam for more than video and do not know what HDR10 is this mod is probably not for you
---------- Post added at 02:31 AM ---------- Previous post was at 02:29 AM ----------
Elitarius said:
Will it works on mi8se?
Wysłane z mojego MI 8 SE przy użyciu Tapatalka
Click to expand...
Click to collapse
you could try camera.qcom.so from zip copy it manually to /vendor/lib/hw backup the original if cam boots your lucky
---------- Post added at 02:34 AM ---------- Previous post was at 02:31 AM ----------
TrippyEngine said:
This doesn't seem to be hdr10, just an oversaturated video
Click to expand...
Click to collapse
the sample in op is oversaturated as it was test clip when i was figuring it out. short clip but colors fixed https://www.youtube.com/watch?v=fiLtwYc0or0
---------- Post added at 02:37 AM ---------- Previous post was at 02:34 AM ----------
tavocabe said:
Is there an app that detects if a video is indeed an hdr10 video?
Click to expand...
Click to collapse
you can use premier pro or resolve and check nits in lumetri scope

---

defcomg said:
you could try camera.qcom.so from zip copy it manually to /vendor/lib/hw backup the original if cam boots your lucky
Click to expand...
Click to collapse
What if I am using mi8se gcam fix? It will still work?
Wysłane z mojego MI 8 SE przy użyciu Tapatalka

---

sannn111ty said:
4K HDR10 Video Recording using MIUI Camera.
Requirements:
Unlocked bootloader
MIUI Global Beta/EU 9.3.1
TWRP/custom recovery
Instructions:
1.Download the mod zip from here
2.Open Settings and make sure that you are running MIUI Global Beta 9.3.1 (minimum)
3.Reboot to your custom recovery (for example TWRP) and flash the mod zip that you downloaded, after that is ready boot back in MIUI
4.Open MIUI Camera and go to video mode then settings.From there change your quality to 4K 60 or 30 FPS and set your video encoder to H.265 High Performance. All the videos that you recorded will be in HDR10 and to view them use compatible app like Google Photos or MX Player
Note:
To remove the mod flash the official 9.3.1 camera libs by amog787
Credits:
Defcomg(Savitar) for modding the libs and making that possible
Video sample
Click to expand...
Click to collapse
Does it work on custom roms???

---

Can i flash this mod with magisk?

---

[email protected] said:
Does it work on custom roms???
Click to expand...
Click to collapse
Nope, at least not on AOSP ROMs.

---

Yep, over saturated and also flashed official 9.3.1 libs but didn't got back I had to flash the whole MIUI EU 9.3.1.
GeeyahnOfficial said:
Tried using it. Didn't like it, so I flashed the Official Camera libs so that I can get back to default and this what happens. The Photo lagging, the GCam Photo is displaying over saturated preview (not the pictures).
- MIUI EU 9.3.1
---------- Post added at 08:31 PM ---------- Previous post was at 08:05 PM ----------
Did you had a over saturated previews at gcam?
Click to expand...
Click to collapse

---

Thanks, this is most interesting!:good:
I have a Mi 8, I'll try camera.qcom.so...
By the way, Mi 8 and Poco have the same qtech or sunny IMX363 sensor, don't they?
How did you (or savitar) change libs to enable HDR10 recording? Is there code on Github?
Please, continue work on this mod and if possible make it a Magisk module so it is easier to revert to defaults. And also, port it to Mi 8

---

Will flashing this add a mode to the camera? Or every video taken from that point will be HDR10?

---

najabi said:
Thanks, this is most interesting!:good:
I have a Mi 8, I'll try camera.qcom.so...
By the way, Mi 8 and Poco have the same qtech or sunny IMX363 sensor, don't they?
How did you (or savitar) change libs to enable HDR10 recording? Is there code on Github?
Please, continue work on this mod and if possible make it a Magisk module so it is easier to revert to defaults. And also, port it to Mi 8
Click to expand...
Click to collapse
Mi8 F1, MIX3 share same hal so you just gotta rename the com.qti.tuned.imx363 bin to match mi8 tuned bin file name the rest should work ie camera.qcom.so and the two libmegface libs and libmediaplayerservice
---------- Post added at 05:50 PM ---------- Previous post was at 05:46 PM ----------
tavocabe said:
Will flashing this add a mode to the camera? Or every video taken from that point will be HDR10?
Click to expand...
Click to collapse
qualcomm intended it to be selectable mode but because meme didnt impliment it and libs are not open source its forced

---

Success!
defcomg said:
Mi8 F1, MIX3 share same hal so you just gotta rename the com.qti.tuned.imx363 bin to match mi8 tuned bin file name the rest should work ie camera.qcom.so and the two libmegface libs and libmediaplayerservice
Click to expand...
Click to collapse
Having done this on my Mi8, It works!!!
In Miui 9.3.7 Camera record video at 4k30p or 4k60p in 10-bit profile Rec.2020 and variable bitrate, but both my players in Windows and MIUI (default and MX player) play it wrong with distorted saturated colors. My Windows PC using latest MPC-BE and mpv can't play them correctly and smoothly either. I can play other 4k 8-bit files normally.
Processing video to 1080p with advanced tools like MeGUI x64 renders the images correctly!, and I can obtain plain x264 8-bit constant frame rate files that render well. (I tried with latest HandBrake but keeps Rec.2020 at 8-bitsand PQ Transfer and doesn't render well).
It is incredible that a Smartphone can record at 4k 60p HDR10 Rec.2020 4:2:0 YUV at Apple's Display P3 (DCI-P3) colorspace, PQ Transfer (sRGB gamma).
ThumbsUp! :good:
For those interested, MediaInfo properties show this:
Code:
Vídeo
ID : 1
Formato : HEVC
Formato/Info : High Efficiency Video Coding
Nombre comercial : HDR10
Formato del perfil :
ID códec : hvc1
ID códec/Info : High Efficiency Video Coding
Duración : 10 s 829 ms
Tasa de bits : 40,8 Mb/s
Ancho : 3 840 píxeles
Alto : 2 160 píxeles
Relación de aspecto : 16:9
Modo velocidad fotogramas : Variable
Velocidad de fotogramas : 29,921 FPS
Velocidad fotogramas mínima : 15,912 FPS
Velocidad fotogramas máxima : 35,658 FPS
Estándar : NTSC
Espacio de color : YUV
Submuestreo croma : 4:2:0
Profundidad bits : 10 bits
Bits/(píxel*fotograma) : 0.165
Tamaño de pista : 52,7 MiB (98%)
Título : VideoHandle
Idioma : Inglés
Fecha de codificación : UTC 2019-03-09 00:26:25
Fecha de etiquetado : UTC 2019-03-09 00:26:25
Rango de color : Full
Colores primarios : BT.2020
Características transferencia : PQ
Coeficientes matriz : BT.2020 non-constant
Principios color monitor masterización : Display P3
Luminancia monitor masterización : min: 0.0050 cd/m2, max: 0 cd/m2
Nivel ligero contenido máximo : 1000 cd/m2
Nivel ligero fotograma medio máximo : 200 cd/m2
mdhd_Duration : 10829
Codec configuration box : hvcC
P.S. I have problems recording at standard 1080p and x265/x264. Have to test thoroughly.

---

hmm. that works. thx.