Hey, i'm new to this forum.
I'm searching for some interesting modules for Magisk, any recommendations?
I've already installed Youtube Vendor.
Thanks for your help.
EDIT: My device is Redmi Note 4X (Mido) (snapdragon version)
[email protected] recording with HEVC support: https://drive.google.com/file/d/1DifkcLt3QiCZUyjEAnLsqzS_mKfF1Q3b/view
You also need Gcam and camera2 api enabled (most ROM's does have it enabled by default), highly recommended gcam: https://drive.google.com/open?id=1zZv5FmtIpro8m9f38Nyzw7yoJ-mQTlNh
well i don't know if gcam will work because I have MIUI 10 Global Dev and some APKs that I downloaded didn't work
hope it will work
also HEVC support will work at any camera sensor? I have omnivision ([email protected]@t)...
earl_21 said:
well i don't know if gcam will work because I have MIUI 10 Global Dev and some APKs that I downloaded didn't work
hope it will work
also HEVC support will work at any camera sensor? I have omnivision ([email protected]@t)...
Click to expand...
Click to collapse
Then dont bother, it wont work.
earl_21 said:
Hey, i'm new to this forum.
I'm searching for some interesting modules for Magisk, any recommendations?
I've already installed Youtube Vendor.
Thanks for your help.
EDIT: My device is Redmi Note 4X (Mido) (snapdragon version)
Click to expand...
Click to collapse
I use YouTube Vanced, Debloater and the Google Product Sans font mostly.
magisk modules
in magisk modules my must have module is viper4android fx materialized.
other modules are wifi bonding and youtube vanced
youksa said:
in magisk modules my must have module is viper4android fx materialized.
other modules are wifi bonding and youtube vanced
Click to expand...
Click to collapse
What does WiFi Bonding do exactly..?
---------- Post added at 04:55 PM ---------- Previous post was at 04:54 PM ----------
k3lcior said:
[email protected] recording with HEVC support: https://drive.google.com/file/d/1DifkcLt3QiCZUyjEAnLsqzS_mKfF1Q3b/view
You also need Gcam and camera2 api enabled (most ROM's does have it enabled by default), highly recommended gcam: https://drive.google.com/open?id=1zZv5FmtIpro8m9f38Nyzw7yoJ-mQTlNh
Click to expand...
Click to collapse
That BoltiShok is for Samsung Sensors only.
---------- Post added at 04:59 PM ---------- Previous post was at 04:55 PM ----------
My Modules Are--
Additional Features for Mido Stock Camera
(Only for MIUI 10)
Audio Modification Library
Camera API2 Enabler
Magic Charging Switch
Max Resolution for YouTube
Viper4Android FX Materialized
YouTube Vanced (Black themed)
HTH.
I have
Could flare dns for magisk ipv6
Global optimised GPS file replacer
GPU turbo boost
RAM management fix by crok
Sysconfig patcher (sp)
I use
Busybox for Android NDK
Camera2 API enabler
Enable doze for GMS
Global optimized GPS file replacer
Init.d injector
Magisk google DNS
Sysconfig patcher
viper4android FX
viper4android XHIFI
WIFI bonding Qualcomm
Youtube vanced black themed
All these modules work well on LOS treble 15.1.
earl_21 said:
well i don't know if gcam will work because I have MIUI 10 Global Dev and some APKs that I downloaded didn't work
hope it will work
also HEVC support will work at any camera sensor? I have omnivision ([email protected]@t)...
Click to expand...
Click to collapse
I tried gcam when i was using miui 10 , but somehow it workes when i transferred to rr rom .
mohsinreadymoney said:
I use
Busybox for Android NDK
Camera2 API enabler
Enable doze for GMS
Global optimized GPS file replacer
Init.d injector
Magisk google DNS
Sysconfig patcher
viper4android FX
viper4android XHIFI
WIFI bonding Qualcomm
Youtube vanced black themed
All these modules work well on LOS treble 15.1.
Click to expand...
Click to collapse
What Init.d injector works??? Are you using it in mido
Shahbaz17 said:
What Init.d injector works??? Are you using it in mido
Click to expand...
Click to collapse
Here is thread
https://forum.xda-developers.com/android/software-hacking/mod-universal-init-d-injector-wip-t3692105
youksa said:
in magisk modules my must have module is viper4android fx materialized.
other modules are wifi bonding and youtube vanced
Click to expand...
Click to collapse
can u send the link of viper4android fx module
OverLord2901 said:
What does WiFi Bonding do exactly..?
---------- Post added at 04:55 PM ---------- Previous post was at 04:54 PM ----------
That BoltiShok is for Samsung Sensors only.
---------- Post added at 04:59 PM ---------- Previous post was at 04:55 PM ----------
My Modules Are--
Additional Features for Mido Stock Camera
(Only for MIUI 10)
Audio Modification Library
Camera API2 Enabler
Magic Charging Switch
Max Resolution for YouTube
Viper4Android FX Materialized
YouTube Vanced (Black themed)
HTH.
Click to expand...
Click to collapse
Work in RR 8.1 and Omnivision sensor :good:
---------- Post added at 12:49 PM ---------- Previous post was at 12:29 PM ----------
k3lcior said:
[email protected] recording with HEVC support: https://drive.google.com/file/d/1DifkcLt3QiCZUyjEAnLsqzS_mKfF1Q3b/view
You also need Gcam and camera2 api enabled (most ROM's does have it enabled by default), highly recommended gcam: https://drive.google.com/open?id=1zZv5FmtIpro8m9f38Nyzw7yoJ-mQTlNh
Click to expand...
Click to collapse
Encode still mp4
---------- Post added at 12:49 PM ---------- Previous post was at 12:49 PM ----------
k3lcior said:
[email protected] recording with HEVC support: https://drive.google.com/file/d/1DifkcLt3QiCZUyjEAnLsqzS_mKfF1Q3b/view
You also need Gcam and camera2 api enabled (most ROM's does have it enabled by default), highly recommended gcam: https://drive.google.com/open?id=1zZv5FmtIpro8m9f38Nyzw7yoJ-mQTlNh
Click to expand...
Click to collapse
Encode still mp4
tiankrisnatian said:
Work in RR 8.1 and Omnivision sensor :good:
---------- Post added at 12:49 PM ---------- Previous post was at 12:29 PM ----------
Encode still mp4
---------- Post added at 12:49 PM ---------- Previous post was at 12:49 PM ----------
Encode still mp4
Click to expand...
Click to collapse
Video always be mp4, the difference is the encoder, if you use hevc/h265 instead of h264, the video will had better quality and less size
Enviado desde mi Redmi Note 4 mediante Tapatalk
beninin said:
Video always be mp4, the difference is the encoder, if you use hevc/h265 instead of h264, the video will had better quality and less size
Enviado desde mi Redmi Note 4 mediante Tapatalk
Click to expand...
Click to collapse
Sorry i mean the encoder still h265 after i see info codec
mohsinreadymoney said:
I use
Busybox for Android NDK
Camera2 API enabler
Enable doze for GMS
Global optimized GPS file replacer
Init.d injector
Magisk google DNS
Sysconfig patcher
viper4android FX
viper4android XHIFI
WIFI bonding Qualcomm
Youtube vanced black themed
All these modules work well on LOS treble 15.1.
Click to expand...
Click to collapse
Two viper4android modules are they working together? Or one at a time?
From where you got max resolution for YouTube @OverLord2901
Shahbaz17 said:
From where you got max resolution for YouTube @OverLord2901
Click to expand...
Click to collapse
Use YouTube Vanced
mohsinreadymoney said:
I use
Busybox for Android NDK
Camera2 API enabler
Enable doze for GMS
Global optimized GPS file replacer
Init.d injector
Magisk google DNS
Sysconfig patcher
viper4android FX
viper4android XHIFI
WIFI bonding Qualcomm
Youtube vanced black themed
All these modules work well on LOS treble 15.1.
Click to expand...
Click to collapse
How is that possible to use both viper?
Related
This flashable zip deletes few CM apps and flashes Google Splash Screen and mentioned Google Apps/Mods along with Google Assistant..
Flash instructions:
Flash any Android 7.0 or Higher ROM (CM 14/14.1/Xenox HD/AOSP or any other)
Pico Gapps
Flash CM Optimizer V3.zip
Deleted Apps:
AOSP Calculator
AOSP Calendar
AOSP DesktopClock
AOSP Dialer
AOSP Email
AOSP Music
AOSP Browser/Browser2
AOSP Camera2
AOSP Contacts
AOSP Gallery
AOSP Keyboard
AOSP Launcher3
AOSP Messaging
AOSP PicoTts
AOSP QuickSearchBox
AOSP Exchange2
BasicDreams
Galaxy4
HoloSpiralWallpaper
LiveWallpapers
NoiseField
PhaseBeam
Eleven
DOWNLOAD LINK -
Latest Build: Nougat Optimizer V3
Google Assistant :
Download this 2 files:
GoogleAssistantBuildProp.zip
tweak.prop
Place it on your phone together then flash it on TWRP.
After restart, go to
Settings>apps>Google App>Storage>Manage Storage>Clear All Data
Old Builds:
1.Version 1 - Flashable Zip- https://drive.google.com/open?id=0B38onre9C_D0Y29nTDREZkRqd2s
2. Nougat Optimizer V2 - https://drive.google.com/open?id=0B38onre9C_D0VHdPaUE2M21UQUE
Note- Please set Google Dialer as default phone app. See screenshots.
PS : Users are free to mirror the link.
arunmcops said:
This flashable zip deletes few CM apps and flashes Google Splash Screen and mentioned Google Apps/Mods along with Google Assistant..
Flash instructions:
Flash CM14.1
Gapps
Flash CM14.1 Optimizer.zip
Deleted Apps:
CMFileManager
Camera2
CMWallpapers
Email
Eleven (Music Player)
Exchange2
Gello (Browser)
Soundrecorder
Calendar
Contacts
AudioFX
Screencast
Trebuchet
Gallery2
Added:
Pixel Bootanimation
Pixel Launcher with Google Wallpapers
GoogleAssistant
Google Dialer
Google Messenger
Google Keyboard
Google Splash Screen
Download Link :Google Drive
PS : Users are free to mirror the link.
Credits: Thanks to @EatBeans at OnePlus3 Forum for Origin zip.
Click to expand...
Click to collapse
I am on cm14.1 santhosh Build and i don't want to lose my data...
How can i flash it..?
Thanks for the development
---------- Post added at 09:35 AM ---------- Previous post was at 08:55 AM ----------
arunmcops said:
This flashable zip deletes few CM apps and flashes Google Splash Screen and mentioned Google Apps/Mods along with Google Assistant..
Flash instructions:
Flash CM14.1
Flash CM14.1 Optimizer.zip
Deleted Apps:
CMFileManager
Camera2
CMWallpapers
Email
Eleven (Music Player)
Exchange2
Gello (Browser)
Soundrecorder
Calendar
Contacts
AudioFX
Screencast
Trebuchet
Gallery2
Added:
Pixel Bootanimation
Pixel Launcher with Google Wallpapers
GoogleAssistant
Google Dialer
Google Messenger
Google Keyboard
Google Splash Screen
Download Link :Google Drive
PS : Users are free to mirror the link.
Credits: Thanks to @EatBeans at OnePlus3 Forum for Origin zip.
Click to expand...
Click to collapse
Just flash the optimizer file nothing happen..?
prakash morye said:
I am on cm14.1 santhosh Build and i don't want to lose my data...
How can i flash it..?
Thanks for the development
---------- Post added at 09:35 AM ---------- Previous post was at 08:55 AM ----------
Just flash the optimizer file nothing happen..?
Click to expand...
Click to collapse
You won't loose your data. Just clear dalvik and cache.
arunmcops said:
You won't loose your data. Just clear dalvik and cache.
Click to expand...
Click to collapse
Can you explain in detail about the procedure... because last time i flash and nothing happens
Error
mount() expects 4 args, got 5
bluemeda said:
Error
mount() expects 4 args, got 5
Click to expand...
Click to collapse
Same error...
@arunmcops plz take a look at this error i attached...
And give me the solution plz
The same here. Nothing happen after flashing this mod.
Kris Chen said:
The same here. Nothing happen after flashing this mod.
Click to expand...
Click to collapse
Looking into issue. It appears error occurred while converting zip into AROMA.
No Link because nothing working?
prakash morye said:
@arunmcops plz take a look at this error i attached...
And give me the solution plz
Click to expand...
Click to collapse
New zip is ready , anyone willing to test it may PM me.
arunmcops said:
New zip is ready , anyone willing to test it may PM me.
Click to expand...
Click to collapse
Yes.. please share..thank you
arunmcops said:
This flashable zip deletes few CM apps and flashes Google Splash Screen and mentioned Google Apps/Mods along with Google Assistant..
Flash instructions:
Flash CM14.1
Gapps
Flash CM14.1 Optimizer.zip
Deleted Apps:
CMFileManager
Camera2
CMWallpapers
Email
Eleven (Music Player)
Exchange2
Gello (Browser)
Soundrecorder
Calendar
Contacts
AudioFX
Screencast
Trebuchet
Gallery2
Added:
Pixel Bootanimation
Pixel Launcher with Google Wallpapers
GoogleAssistant
Google Dialer
Google Messenger
Google Keyboard
Google Splash Screen
DOWNLOAD LINK - https://drive.google.com/open?id=0B38onre9C_D0Y29nTDREZkRqd2s
Note- Please set Google Dialer as default phone app. See screenshots.
PS : Users are free to mirror the link.
Credits: Thanks to @EatBeans at OnePlus3 Forum for Origin zip.
Click to expand...
Click to collapse
Screenshots on how to setup dialer as default.
arunmcops said:
Screenshots on how to setup dialer as default.
Click to expand...
Click to collapse
Thanx now i set it default and it works !
My dailer start working now...
Thanks for the help and thanks for the development:fingers-crossed:
Its working now..awesome changes thanks for your development..
---------- Post added at 07:57 PM ---------- Previous post was at 07:39 PM ----------
Hi arunm,could you please help us to get camera worked for 14.1 rm3 ..thank you
satish6g said:
Its working now..awesome changes thanks for your development..
---------- Post added at 07:57 PM ---------- Previous post was at 07:39 PM ----------
Hi arunm,could you please help us to get camera worked for 14.1 rm3 ..thank you
Click to expand...
Click to collapse
Use Camu for both Photo/Video or Footej for photo.
@arunmcops
Thanks for your work. I flashed the zip but I need calendar, so i installed it again from play store but i have this error "calendar storage disabled" without being able to re-enable it. It just keeps popping up the same message.
Do you have in mind any workaround?
Sent from my Pixel XL using Tapatalk
The only thing is that i am not getting that pixel boot animation...
prakash morye said:
The only thing is that i am not getting that pixel boot animation...
Click to expand...
Click to collapse
I will check it and come back tomorrow.
paraskevasnp said:
@arunmcops
Thanks for your work. I flashed the zip but I need calendar, so i installed it again from play store but i have this error "calendar storage disabled" without being able to re-enable it. It just keeps popping up the same message.
Do you have in mind any workaround?
Click to expand...
Click to collapse
Clear Data and Cache of calander app.
4K HDR10 Video Recording using MIUI Camera.
Requirements:
Unlocked bootloader
MIUI Global Beta/EU 9.3.1
TWRP/custom recovery
Instructions:
1.Download the mod zip from here
2.Open Settings and make sure that you are running MIUI Global Beta 9.3.1 (minimum)
3.Reboot to your custom recovery (for example TWRP) and flash the mod zip that you downloaded, after that is ready boot back in MIUI
4.Open MIUI Camera and go to video mode then settings.From there change your quality to 4K 60 or 30 FPS and set your video encoder to H.265 High Performance. All the videos that you recorded will be in HDR10 and to view them use compatible app like Google Photos or MX Player
Note:
To remove the mod flash the official 9.3.1 camera libs by amog787
Credits:
Defcomg(Savitar) for modding the libs and making that possible
Video sample
RESERVED
Updated stock libs to fix issue where u can't revert and gcam fails.
Will it works on mi8se?
Wysłane z mojego MI 8 SE przy użyciu Tapatalka
this mod also affect gcam
So no suport for custom roms right?
Sent from my Xiaomi Poco F1 using XDA Labs
sannn111ty said:
4K HDR10 Video Recording using MIUI Camera.
Requirements:
Unlocked bootloader
MIUI Global Beta/EU 9.3.1
TWRP/custom recovery
Instructions:
1.Download the mod zip from here
2.Open Settings and make sure that you are running MIUI Global Beta 9.3.1 (minimum)
3.Reboot to your custom recovery (for example TWRP) and flash the mod zip that you downloaded, after that is ready boot back in MIUI
4.Open MIUI Camera and go to video mode then settings.From there change your quality to 4K 60 or 30 FPS and set your video encoder to H.265 High Performance. All the videos that you recorded will be in HDR10 and to view them use compatible app like Google Photos or MX Player
Note:
To remove the mod flash the official 9.3.1 camera libs by amog787
Credits:
Defcomg(Savitar) for modding the libs and making that possible
Video sample
Click to expand...
Click to collapse
Tried using it. Didn't like it, so I flashed the Official Camera libs so that I can get back to default and this what happens. The Photo lagging, the GCam Photo is displaying over saturated preview (not the pictures).
- MIUI EU 9.3.1
---------- Post added at 08:31 PM ---------- Previous post was at 08:05 PM ----------
cediedc said:
this mod also affect gcam
Click to expand...
Click to collapse
Did you had a over saturated previews at gcam?
This doesn't seem to be hdr10, just an oversaturated video
Is there an app that detects if a video is indeed an hdr10 video?
what is HDR10 ?
If you use stock cam for more than video and do not know what HDR10 is this mod is probably not for you
---------- Post added at 02:31 AM ---------- Previous post was at 02:29 AM ----------
Elitarius said:
Will it works on mi8se?
Wysłane z mojego MI 8 SE przy użyciu Tapatalka
Click to expand...
Click to collapse
you could try camera.qcom.so from zip copy it manually to /vendor/lib/hw backup the original if cam boots your lucky
---------- Post added at 02:34 AM ---------- Previous post was at 02:31 AM ----------
TrippyEngine said:
This doesn't seem to be hdr10, just an oversaturated video
Click to expand...
Click to collapse
the sample in op is oversaturated as it was test clip when i was figuring it out. short clip but colors fixed https://www.youtube.com/watch?v=fiLtwYc0or0
---------- Post added at 02:37 AM ---------- Previous post was at 02:34 AM ----------
tavocabe said:
Is there an app that detects if a video is indeed an hdr10 video?
Click to expand...
Click to collapse
you can use premier pro or resolve and check nits in lumetri scope
defcomg said:
you could try camera.qcom.so from zip copy it manually to /vendor/lib/hw backup the original if cam boots your lucky
Click to expand...
Click to collapse
What if I am using mi8se gcam fix? It will still work?
Wysłane z mojego MI 8 SE przy użyciu Tapatalka
sannn111ty said:
4K HDR10 Video Recording using MIUI Camera.
Requirements:
Unlocked bootloader
MIUI Global Beta/EU 9.3.1
TWRP/custom recovery
Instructions:
1.Download the mod zip from here
2.Open Settings and make sure that you are running MIUI Global Beta 9.3.1 (minimum)
3.Reboot to your custom recovery (for example TWRP) and flash the mod zip that you downloaded, after that is ready boot back in MIUI
4.Open MIUI Camera and go to video mode then settings.From there change your quality to 4K 60 or 30 FPS and set your video encoder to H.265 High Performance. All the videos that you recorded will be in HDR10 and to view them use compatible app like Google Photos or MX Player
Note:
To remove the mod flash the official 9.3.1 camera libs by amog787
Credits:
Defcomg(Savitar) for modding the libs and making that possible
Video sample
Click to expand...
Click to collapse
Does it work on custom roms???
Can i flash this mod with magisk?
[email protected] said:
Does it work on custom roms???
Click to expand...
Click to collapse
Nope, at least not on AOSP ROMs.
Yep, over saturated and also flashed official 9.3.1 libs but didn't got back I had to flash the whole MIUI EU 9.3.1.
GeeyahnOfficial said:
Tried using it. Didn't like it, so I flashed the Official Camera libs so that I can get back to default and this what happens. The Photo lagging, the GCam Photo is displaying over saturated preview (not the pictures).
- MIUI EU 9.3.1
---------- Post added at 08:31 PM ---------- Previous post was at 08:05 PM ----------
Did you had a over saturated previews at gcam?
Click to expand...
Click to collapse
Thanks, this is most interesting!:good:
I have a Mi 8, I'll try camera.qcom.so...
By the way, Mi 8 and Poco have the same qtech or sunny IMX363 sensor, don't they?
How did you (or savitar) change libs to enable HDR10 recording? Is there code on Github?
Please, continue work on this mod and if possible make it a Magisk module so it is easier to revert to defaults. And also, port it to Mi 8
Will flashing this add a mode to the camera? Or every video taken from that point will be HDR10?
najabi said:
Thanks, this is most interesting!:good:
I have a Mi 8, I'll try camera.qcom.so...
By the way, Mi 8 and Poco have the same qtech or sunny IMX363 sensor, don't they?
How did you (or savitar) change libs to enable HDR10 recording? Is there code on Github?
Please, continue work on this mod and if possible make it a Magisk module so it is easier to revert to defaults. And also, port it to Mi 8
Click to expand...
Click to collapse
Mi8 F1, MIX3 share same hal so you just gotta rename the com.qti.tuned.imx363 bin to match mi8 tuned bin file name the rest should work ie camera.qcom.so and the two libmegface libs and libmediaplayerservice
---------- Post added at 05:50 PM ---------- Previous post was at 05:46 PM ----------
tavocabe said:
Will flashing this add a mode to the camera? Or every video taken from that point will be HDR10?
Click to expand...
Click to collapse
qualcomm intended it to be selectable mode but because meme didnt impliment it and libs are not open source its forced
Success!
defcomg said:
Mi8 F1, MIX3 share same hal so you just gotta rename the com.qti.tuned.imx363 bin to match mi8 tuned bin file name the rest should work ie camera.qcom.so and the two libmegface libs and libmediaplayerservice
Click to expand...
Click to collapse
Having done this on my Mi8, It works!!!
In Miui 9.3.7 Camera record video at 4k30p or 4k60p in 10-bit profile Rec.2020 and variable bitrate, but both my players in Windows and MIUI (default and MX player) play it wrong with distorted saturated colors. My Windows PC using latest MPC-BE and mpv can't play them correctly and smoothly either. I can play other 4k 8-bit files normally.
Processing video to 1080p with advanced tools like MeGUI x64 renders the images correctly!, and I can obtain plain x264 8-bit constant frame rate files that render well. (I tried with latest HandBrake but keeps Rec.2020 at 8-bitsand PQ Transfer and doesn't render well).
It is incredible that a Smartphone can record at 4k 60p HDR10 Rec.2020 4:2:0 YUV at Apple's Display P3 (DCI-P3) colorspace, PQ Transfer (sRGB gamma).
ThumbsUp! :good:
For those interested, MediaInfo properties show this:
Code:
Vídeo
ID : 1
Formato : HEVC
Formato/Info : High Efficiency Video Coding
Nombre comercial : HDR10
Formato del perfil :
ID códec : hvc1
ID códec/Info : High Efficiency Video Coding
Duración : 10 s 829 ms
Tasa de bits : 40,8 Mb/s
Ancho : 3 840 píxeles
Alto : 2 160 píxeles
Relación de aspecto : 16:9
Modo velocidad fotogramas : Variable
Velocidad de fotogramas : 29,921 FPS
Velocidad fotogramas mínima : 15,912 FPS
Velocidad fotogramas máxima : 35,658 FPS
Estándar : NTSC
Espacio de color : YUV
Submuestreo croma : 4:2:0
Profundidad bits : 10 bits
Bits/(píxel*fotograma) : 0.165
Tamaño de pista : 52,7 MiB (98%)
Título : VideoHandle
Idioma : Inglés
Fecha de codificación : UTC 2019-03-09 00:26:25
Fecha de etiquetado : UTC 2019-03-09 00:26:25
Rango de color : Full
Colores primarios : BT.2020
Características transferencia : PQ
Coeficientes matriz : BT.2020 non-constant
Principios color monitor masterización : Display P3
Luminancia monitor masterización : min: 0.0050 cd/m2, max: 0 cd/m2
Nivel ligero contenido máximo : 1000 cd/m2
Nivel ligero fotograma medio máximo : 200 cd/m2
mdhd_Duration : 10829
Codec configuration box : hvcC
P.S. I have problems recording at standard 1080p and x265/x264. Have to test thoroughly.
hmm. that works. thx.
Introduction :
This is a Google Camera mod for the Pixel 2/XL, Based on BSG, PX, Urnyx05, The Dise Gcam, by adding some "extra" features in it.
Fully Optimized for my Pixel 2 XL, for other pixel, try your self ,
Click to expand...
Click to collapse
Requirements:
OS: Android 9 or 10
Device: Google Pixel 2 Series
Click to expand...
Click to collapse
MWP v3.5 FINAL Gcam v7.3.020:
Features :
Based Gcam v7.3.020 by BSG, The_Dise, Urnyx05
Modded lib for Learned Depth in Portrait Mode (Pixel 2/XL)
Added new LibPatcher & Tone Curved
Added Manual Shutterspeed slider
Added Manual ISO slider
( ISO silder is not forced, so maybe the ISO results in exif is depending of the light conditions )
Added 4 step Manual Focus slider ( INF, 2M, Selfie, Macro ), Big thanks to Abhi Shake
Added Quick toggle to enable/disable Sabre ( SRZ ) on viewfinder
Added Exposure Compensation
Added Correction ShutterSpeed control
Added Super res zoom / sabre ( currently not stable in portrait mode )
Added HDR Enhanced Frames selection
Added Custom AWB From the_Dise Gcam ( Pixel 2, Pixel 3, IMX586 )
Added Default launch camera mode selection
Added Focus Tracking (not working in Portrait Mode)
Possibility to use 3rd party gallery app for photos viewer
Re Designed main layout, color & font, thanks to Ahbi
Support XML config to saving and restore your configs faster
Click to expand...
Click to collapse
================================================================================================
MWP v2.4.2 Gcam v7.2.014
Features:
Based Gcam PX v4.3 by Cstark and his team
Exposure Compensation
Exposure slider ( Working if HDR+ E activated )
- Max fast shutter : 1/2000s
- Max Long shutter : 59s
Added "Expo" in libpacher ( this feature may can help you to set for "Dehazing" Level )
Added disable zoom in portrait mode ( working for human object only )
Added Manual Correction auto exposure / max exposure & ISO (limited)
Support XML config to saving and restore your configs faster ( exposure slider value not included )
Click to expand...
Click to collapse
Installation :
Download the apk
Locate APK with File Manager and Install
Note : If you having issue "Application not installed" try to download the cloned apk
Click to expand...
Click to collapse
How to using xml config :
Tutorial importing xml / config
=========================
1. Download xml files, in Download section below
2. In Gcam v2.4.2 : Copy all xmls to "Gcam_MWP_configs" folder on internal storage ( for cloned version, you need to create folder manually on internal storage )
3. In Gcam v3xx : Copy all xmls to "Gcam_MWP_73" folder on internal storage ( for cloned version, you need to create folder manually on internal storage )
4. Done
Notes : All the 2.4.2 configs cannot be used in Gcam 3xx and vice versa..
All the shared config/xml including value of libpather, awb setting, and other, are according to my personal taste, you can make or build your own configs with saving your personal setting or configuration in the app by saving and renaming it according to what you want
Tutorial using xml / config files
=========================
1. Open MWP Gcam,
2. Double tap on the black area beside shutter button
3. Then it will show config option
4. Select the config you want to try
5. Press restore
6. Done,, Config is ready to use.
Deleting xml / config files
=====================
1. Double tap on the black area beside shutter button
2. Then it will show config option
3. Select the config you want to delete
5. Press delete)
Official Channel & Download site
All the specific changelog and features update can be found here..
https://www.celsoazevedo.com/files/android/google-camera/dev-MWP/
https://t.me/mwpgcam
Click to expand...
Click to collapse
Thanks To/Credits
Arnova8G2, BSG, cstark27, Urynx05, The_Dise, PX mod team, @fahmi182, Ahbi Shake, and all dev in celsoazevedo
Click to expand...
Click to collapse
Does this modded camera take advantage of the PX Mod Team's Magisk plugins for DSP/Easel Permission and Long Exposure?
MrBrady said:
Does this modded camera take advantage of the PX Mod Team's Magisk plugins for DSP/Easel Permission and Long Exposure?
Click to expand...
Click to collapse
Yes, i use that in this gcam..
Nice picture with astro mode
MartinN6 said:
Nice picture with astro mode
Click to expand...
Click to collapse
Wow,, Congratulations bruh..:good::good:
MartinN6 said:
Nice picture with astro mode
Click to expand...
Click to collapse
Very nice, but I can see that like in PX from cstark there are few lines of black pixels at the top of the picture. Annoying bug - present only in night mode :/
Could you please provide a mirror ? i dont know how to use telegram Appreciate your help & hard work.
I just updated my device to R dp3
Root with magisk canary and flashed "Pixel2XL_LongExp_Dec2019_A10.zip" with magisk/Modul
Astro modus works pretty good!
Thank you for this amazing camera mod.
Please Share a mirror link!!!
MartinN6 said:
I just updated my device to R dp3
Root with magisk canary and flashed "Pixel2XL_LongExp_Dec2019_A10.zip" with magisk/Modul
Astro modus works pretty good!
Click to expand...
Click to collapse
Are you rooting on Android r? No facing bootlop?
fajar rinda said:
Are you rooting on Android r? No facing bootlop?
Click to expand...
Click to collapse
yep - rooted device with last magisk canary - works pretty good - no bootloop or other bugs.
Let me test it on marlin
---------- Post added at 08:18 PM ---------- Previous post was at 08:15 PM ----------
Yes it works on marlin
so you gotta signup for telegram to get this? lol you part of the problem man.
nobreak1970 said:
so you gotta signup for telegram to get this? lol you part of the problem man.
Click to expand...
Click to collapse
"part of the problem man?" :silly: ?
Anyone having a white screen problem ..it was working fine after some shots I'm getting white screen after clicking photo
Ztaker said:
Anyone having a white screen problem ..it was working fine after some shots I'm getting white screen after clicking photo
Click to expand...
Click to collapse
use one of the config that I have shared in the MWP 3xx config.zip file (the link is listed above)
if you don't like the color results, awb results and etc, you can change it all as you like, including your libpatcher, AWB mod etc... then re-save it, and make your own config
I am using the configs but I have the white pics problem too.
Edit: I had not "restored" the config, after doing it it is working fine.
working fine here
I cant install the latest version on my pixel 2 xl, only the cloned apk (that is not the latest).
Any tip???
I was wondering about suggestions i went looking around the web, i found this kcal profiles from a op2 forum and they work perfectly on EX kernel manager
Sorry wrong thread
How to use this and what does it do?
ronakbarman said:
How to use this and what does it do?
Click to expand...
Click to collapse
You can use KCAL profiles with a kernel that supports KCAL and then you use a kernel manager like EXKM to select the a profile (you must unzip that kcal file into the kcal folder for EXKM).
These profiles adjust the display values for color.
---------- Post added at 03:25 PM ---------- Previous post was at 03:24 PM ----------
I highly recommend franco's if it's part of that zip.
Hey Guys, after the Open Beta 3 some gcams stopped working with the Auxiliary cameras. I found pixel cam fuse on their website and it was the only one which was working with the Auxiliary cameras, so I added gestures support and modified its UI to complete Black, I hope U guys like it!
ONEPLUS 8 PRO SUPPORTED TOO:-
https://drive.google.com/file/d/1CJhD8O5Nssv2_4E9-ytG6jmEfoE1HZDR/view?usp=drivesdk
XML LINK:-
https://drive.google.com/file/d/1CPLOESBdxJJhRWq6kSv7aQ921OLm9_rN/view?usp=drivesdk
PLZ CLEAR DATA AND CACHE OF GCAM AFTER INSTALLING BCOZ I ADDED AWB PROFILE AND HDR FRAME SETTINGS IN THE NEW MODDED UI VERSION (BASED ON PIXELCAM 6.0)(I MADE A UPDATE TO MY MODDED UI VERSION).
Abhay Singh Gill said:
...
Click to expand...
Click to collapse
By request of OP @Abhay Singh Gill THREAD CLOSED as duplicate of https://forum.xda-developers.com/oneplus-8/oneplus-8--8-pro-cross-device-themes-apps--mods/gcam-beta-3-oos-11-0-1-1-3-cameras-t4188223 in the OnePlus 8 / 8 Pro & 8T Cross Device Themes, Apps & Mods section.
If interested in this GCAM please follow the thread linked above.