I was wondering about suggestions i went looking around the web, i found this kcal profiles from a op2 forum and they work perfectly on EX kernel manager
Sorry wrong thread
How to use this and what does it do?
ronakbarman said:
How to use this and what does it do?
Click to expand...
Click to collapse
You can use KCAL profiles with a kernel that supports KCAL and then you use a kernel manager like EXKM to select the a profile (you must unzip that kcal file into the kcal folder for EXKM).
These profiles adjust the display values for color.
---------- Post added at 03:25 PM ---------- Previous post was at 03:24 PM ----------
I highly recommend franco's if it's part of that zip.
Related
WARNING: THIS METHOD CAN BE DANGEROUS. DON’T DO ANYTHING IF YOU DO NOT KNOW WHAT YOU DO.
I AM NOT RESPONSIBLE IF YOU TRANSFORM YOUR N1 INTO A BRICK
.38.8 zKernel
This kernel is based on IR+Evervolv.
Recommendation
SmartAssV2 254-1130Mhz
BUGS
test it
DOWNLOAD
.38.8 zKernel #21 :: BFS :: 2011-12-30
Remember to +(Thank) when downloading kernel
Sources #21 (will update when possible): https://github.com/zyr3x/ics-zkernel-passion
Changelog:
2012-01-12:
Include modules : сifs,tun
Enable: DMA, BFQ hierarchical scheduling support
2012-01-07:
Reconfig kernel options
enable AXI
Speed up the GPU ( Quadrent: 3D 340 -> 385; FPS ~9fps -> ~18fps ). Smoother operation CM9.
fix critical bug with bootloop(crash data)
2012-01-02:
rebase all sources on iR
2011-12-30 #21:
update video, gpu, kgsl (ir-kernel)
2011-12-28 #15:
update blk-lib
add / enable sio-iosched
enable cfs-iosched (default)
2011-12-26 #14:
add SmartAss
update CPUStats
update Ondemand
update kernel classes
2011-12-25 #11:
update CPUSET
update POSIX_TIMER
update RCUTINY
2011-12-25 #10:
added CPU governors:
Lazy
InteractiveX
Savaged-Zen
SmartAssV2
Flashing now, will report back with results!
thanks
Does this mean what I think it does?
Are we able to get HW acceleration soon?!
No. This is based off the one included in the ics Tom if I looked correctly.
Sent from my Nexus One using XDA App
zyr3x said:
.38.8 zKernel
2.6.38.8, 256-1036 (base on Evervolv-Perdo-2.1.0p2-passion)
Changelog:
2011-12-25 #11:
update CPUSET
update POSIX_TIMER
update RCUTINY
2011-12-25 #10:
added CPU governors:
Lazy
InteractiveX
Savaged-Zen
SmartAssV2
Click to expand...
Click to collapse
Thank you for sharing. Will this work with MIUI ROM?
eidros said:
Thank you for sharing. Will this work with MIUI ROM?
Click to expand...
Click to collapse
Need test. I don `t know
Where is boot.img? so i can to use with fastboot.
Battery drain on #11 seems a bit faster...a little less lag on app processing but still only problem is the lack of msm 3.0 kernal. Good improvement for the time being
Sent from my Nexus One using XDA App
Forbearance. I think we will find common effort to solve this problem
fjnty5 said:
Battery drain on #11 seems a bit faster...a little less lag on app processing but still only problem is the lack of msm 3.0 kernal. Good improvement for the time being
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
How about battery drain on #14?
---------- Post added at 05:03 PM ---------- Previous post was at 04:53 PM ----------
btw, i did one boot.img http://mup5.com/40393 (for texasice's rom)
u need extract bcm4329.ko and push by yourself.
Thanks OP
File appears to be a zip file, however when I try to install it it does not show up as a zip and I can not install. Is anyone else experiencing this?
NVM.....seems to be correct now.
Quadrant
j00m said:
How about battery drain on #14?
---------- Post added at 05:03 PM ---------- Previous post was at 04:53 PM ----------
btw, i did one boot.img http://mup5.com/40393 (for texasice's rom)
u need extract bcm4329.ko and push by yourself.
Thanks OP
Click to expand...
Click to collapse
.38.8 zKernel #14 vs Tiamat-Drews 2.1.0p3
1157 vs 1077
wait next release...
Works great, but there is one thing I miss... Could you please add SWAP support (so we can use a2sd reswap with DT A2SD?) It would be a great help!
Thanks,
Zeboo
zyr3x said:
.38.8 zKernel #14 vs Tiamat-Drews 2.1.0p3
1157 vs 1077
wait next release...
Click to expand...
Click to collapse
as default or need to use setcpu things? and what are the number? 1157 vs 1077
btw, I made boot.img & split bcm4329.ko from OP for Evervolv-Perdo-2.1.0p3-passion ROM of texasice: http://mup5.com/40767
Quadrant scores.
Sent from my Nexus One using xda premium
ctfrommn said:
Quadrant scores.
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
thanks.
j00m said:
as default or need to use setcpu things? and what are the number? 1157 vs 1077
btw, I made boot.img & split bcm4329.ko from OP for Evervolv-Perdo-2.1.0p3-passion ROM of texasice: http://mup5.com/40767
Click to expand...
Click to collapse
Max point on SmartAssV2 1036-245
zyr3x said:
Max point on SmartAssV2 1036-245
Click to expand...
Click to collapse
does i need setcpu? or u config as default!
Please give some guide for newbie as me.
I use my soft CKZTools.apk v 1.4.4 ICS Profiles )
Based on KHIMIBH22.0
Changes:
- Host file modified (no adds)
- 4600+ Icons (MiroEx)
- No Update to v6
- Updated all gapps
- Added Swiftkey
- Native Root added (no need to use super SU, use Security/Permission and enable "Root permission")
Future projects:
Add smartassv2/lulzactive governor + overclocking to kernel.
3-way reboot
Download:
miui_H3LTEGlobal_KHIMIBH22.0.1.zip
resofty said:
Based on KHIMIBH22.0
Changes:
- Host file modified (no adds)
- 4600+ Icons (MiroEx)
- No Update to v6
- Updated all gapps
- Added Swiftkey
- Native Root added (no need to use super SU, use Security/Permission and enable "Root permission")
Future projects:
Add smartassv2/lulzactive governor + overclocking to kernel.
3-way reboot
Download:
miui_H3LTEGlobal_KHIMIBH22.0.1.zip
Click to expand...
Click to collapse
I want to download this, i cant download from from mega, it requres data cannot use wifi, so please can you create a mirror link? Or other download link
Sent from my HM NOTE 1LTE
How to Flash?Via TWRp?
Balaji Sriram said:
How to Flash?Via TWRp?
Click to expand...
Click to collapse
use Philz-Touch recovery to flash
---------- Post added at 12:55 PM ---------- Previous post was at 12:51 PM ----------
thanks for the rom
Hi,
I'm using Lineage OS 14.1 with microg, xposed, magisk.
I want to see volume percentage whenever volume of ringer or media or earpiece or loudspeaker is changed by volume + - buttons.
I tried find xposed modules, google etc but couldn't get any reliable solution or any hint.
Is it possible?
Please tell me.
Thanks
I think I found it in huawei/honor phones ; Tested on honor9 with oreo.
In /product/etc/prop/local.prop there is a setting
ro. config. volume_steps=
---------- Post added at 21:24 ---------- Previous post was at 21:22 ----------
You won't see volume percentage shown, but each press to a volume key will increase/decrease of only 1 percent.
---------- Post added at 21:24 ---------- Previous post was at 21:24 ----------
If setted to 100
oslo83 said:
I think I found it in huawei/honor phones ; Tested on honor9 with oreo.
In /product/etc/prop/local.prop there is a setting
ro. config. volume_steps=
---------- Post added at 21:24 ---------- Previous post was at 21:22 ----------
You won't see volume percentage shown, but each press to a volume key will increase/decrease of only 1 percent.
---------- Post added at 21:24 ---------- Previous post was at 21:24 ----------
If setted to 100
Click to expand...
Click to collapse
Thanks for the tip.
The steps can be changed, i did that using a xposed module volume+.
But I want see the volume as percentage instead of bar whenever volume +/- is pressed.
Hey, i'm new to this forum.
I'm searching for some interesting modules for Magisk, any recommendations?
I've already installed Youtube Vendor.
Thanks for your help.
EDIT: My device is Redmi Note 4X (Mido) (snapdragon version)
[email protected] recording with HEVC support: https://drive.google.com/file/d/1DifkcLt3QiCZUyjEAnLsqzS_mKfF1Q3b/view
You also need Gcam and camera2 api enabled (most ROM's does have it enabled by default), highly recommended gcam: https://drive.google.com/open?id=1zZv5FmtIpro8m9f38Nyzw7yoJ-mQTlNh
well i don't know if gcam will work because I have MIUI 10 Global Dev and some APKs that I downloaded didn't work
hope it will work
also HEVC support will work at any camera sensor? I have omnivision ([email protected]@t)...
earl_21 said:
well i don't know if gcam will work because I have MIUI 10 Global Dev and some APKs that I downloaded didn't work
hope it will work
also HEVC support will work at any camera sensor? I have omnivision ([email protected]@t)...
Click to expand...
Click to collapse
Then dont bother, it wont work.
earl_21 said:
Hey, i'm new to this forum.
I'm searching for some interesting modules for Magisk, any recommendations?
I've already installed Youtube Vendor.
Thanks for your help.
EDIT: My device is Redmi Note 4X (Mido) (snapdragon version)
Click to expand...
Click to collapse
I use YouTube Vanced, Debloater and the Google Product Sans font mostly.
magisk modules
in magisk modules my must have module is viper4android fx materialized.
other modules are wifi bonding and youtube vanced
youksa said:
in magisk modules my must have module is viper4android fx materialized.
other modules are wifi bonding and youtube vanced
Click to expand...
Click to collapse
What does WiFi Bonding do exactly..?
---------- Post added at 04:55 PM ---------- Previous post was at 04:54 PM ----------
k3lcior said:
[email protected] recording with HEVC support: https://drive.google.com/file/d/1DifkcLt3QiCZUyjEAnLsqzS_mKfF1Q3b/view
You also need Gcam and camera2 api enabled (most ROM's does have it enabled by default), highly recommended gcam: https://drive.google.com/open?id=1zZv5FmtIpro8m9f38Nyzw7yoJ-mQTlNh
Click to expand...
Click to collapse
That BoltiShok is for Samsung Sensors only.
---------- Post added at 04:59 PM ---------- Previous post was at 04:55 PM ----------
My Modules Are--
Additional Features for Mido Stock Camera
(Only for MIUI 10)
Audio Modification Library
Camera API2 Enabler
Magic Charging Switch
Max Resolution for YouTube
Viper4Android FX Materialized
YouTube Vanced (Black themed)
HTH.
I have
Could flare dns for magisk ipv6
Global optimised GPS file replacer
GPU turbo boost
RAM management fix by crok
Sysconfig patcher (sp)
I use
Busybox for Android NDK
Camera2 API enabler
Enable doze for GMS
Global optimized GPS file replacer
Init.d injector
Magisk google DNS
Sysconfig patcher
viper4android FX
viper4android XHIFI
WIFI bonding Qualcomm
Youtube vanced black themed
All these modules work well on LOS treble 15.1.
earl_21 said:
well i don't know if gcam will work because I have MIUI 10 Global Dev and some APKs that I downloaded didn't work
hope it will work
also HEVC support will work at any camera sensor? I have omnivision ([email protected]@t)...
Click to expand...
Click to collapse
I tried gcam when i was using miui 10 , but somehow it workes when i transferred to rr rom .
mohsinreadymoney said:
I use
Busybox for Android NDK
Camera2 API enabler
Enable doze for GMS
Global optimized GPS file replacer
Init.d injector
Magisk google DNS
Sysconfig patcher
viper4android FX
viper4android XHIFI
WIFI bonding Qualcomm
Youtube vanced black themed
All these modules work well on LOS treble 15.1.
Click to expand...
Click to collapse
What Init.d injector works??? Are you using it in mido
Shahbaz17 said:
What Init.d injector works??? Are you using it in mido
Click to expand...
Click to collapse
Here is thread
https://forum.xda-developers.com/android/software-hacking/mod-universal-init-d-injector-wip-t3692105
youksa said:
in magisk modules my must have module is viper4android fx materialized.
other modules are wifi bonding and youtube vanced
Click to expand...
Click to collapse
can u send the link of viper4android fx module
OverLord2901 said:
What does WiFi Bonding do exactly..?
---------- Post added at 04:55 PM ---------- Previous post was at 04:54 PM ----------
That BoltiShok is for Samsung Sensors only.
---------- Post added at 04:59 PM ---------- Previous post was at 04:55 PM ----------
My Modules Are--
Additional Features for Mido Stock Camera
(Only for MIUI 10)
Audio Modification Library
Camera API2 Enabler
Magic Charging Switch
Max Resolution for YouTube
Viper4Android FX Materialized
YouTube Vanced (Black themed)
HTH.
Click to expand...
Click to collapse
Work in RR 8.1 and Omnivision sensor :good:
---------- Post added at 12:49 PM ---------- Previous post was at 12:29 PM ----------
k3lcior said:
[email protected] recording with HEVC support: https://drive.google.com/file/d/1DifkcLt3QiCZUyjEAnLsqzS_mKfF1Q3b/view
You also need Gcam and camera2 api enabled (most ROM's does have it enabled by default), highly recommended gcam: https://drive.google.com/open?id=1zZv5FmtIpro8m9f38Nyzw7yoJ-mQTlNh
Click to expand...
Click to collapse
Encode still mp4
---------- Post added at 12:49 PM ---------- Previous post was at 12:49 PM ----------
k3lcior said:
[email protected] recording with HEVC support: https://drive.google.com/file/d/1DifkcLt3QiCZUyjEAnLsqzS_mKfF1Q3b/view
You also need Gcam and camera2 api enabled (most ROM's does have it enabled by default), highly recommended gcam: https://drive.google.com/open?id=1zZv5FmtIpro8m9f38Nyzw7yoJ-mQTlNh
Click to expand...
Click to collapse
Encode still mp4
tiankrisnatian said:
Work in RR 8.1 and Omnivision sensor :good:
---------- Post added at 12:49 PM ---------- Previous post was at 12:29 PM ----------
Encode still mp4
---------- Post added at 12:49 PM ---------- Previous post was at 12:49 PM ----------
Encode still mp4
Click to expand...
Click to collapse
Video always be mp4, the difference is the encoder, if you use hevc/h265 instead of h264, the video will had better quality and less size
Enviado desde mi Redmi Note 4 mediante Tapatalk
beninin said:
Video always be mp4, the difference is the encoder, if you use hevc/h265 instead of h264, the video will had better quality and less size
Enviado desde mi Redmi Note 4 mediante Tapatalk
Click to expand...
Click to collapse
Sorry i mean the encoder still h265 after i see info codec
mohsinreadymoney said:
I use
Busybox for Android NDK
Camera2 API enabler
Enable doze for GMS
Global optimized GPS file replacer
Init.d injector
Magisk google DNS
Sysconfig patcher
viper4android FX
viper4android XHIFI
WIFI bonding Qualcomm
Youtube vanced black themed
All these modules work well on LOS treble 15.1.
Click to expand...
Click to collapse
Two viper4android modules are they working together? Or one at a time?
From where you got max resolution for YouTube @OverLord2901
Shahbaz17 said:
From where you got max resolution for YouTube @OverLord2901
Click to expand...
Click to collapse
Use YouTube Vanced
mohsinreadymoney said:
I use
Busybox for Android NDK
Camera2 API enabler
Enable doze for GMS
Global optimized GPS file replacer
Init.d injector
Magisk google DNS
Sysconfig patcher
viper4android FX
viper4android XHIFI
WIFI bonding Qualcomm
Youtube vanced black themed
All these modules work well on LOS treble 15.1.
Click to expand...
Click to collapse
How is that possible to use both viper?
Please help me set / change SELinux to permissive on Stock MIUI 10.2 unlocked,rooted with magisk, in desperate need of this. Checked some on the internet but "Universal init.d" app has been removed from play store.
For god's sake, cant it be just simple that add "blah-blah" module in magisk and reboot and u r done!:fingers-crossed:
Flash this in twrp if you want permanent solution https://androidfilehost.com/?fid=3700668719832241024 or you can just set it using kernel manager like smartpack kernel manager or kernel adiutor (in misc section).
I don't like touch on kernel, so I created a file in /data/adb/post-fs-data.d with follow content (permissions: rwxr-xr-x or 755)
Code:
#!/system/bin/sh
setenforce 0
This way I can simply delete the permissiver script whenever I want.
I use CoolTool and to read some battery files, even having root privilegies, SELinux permissive is necessary.
Adriano-A3 said:
I don't like touch on kernel, so I created a file in /data/adb/post-fs-data.d with follow content (permissions: rwxr-xr-x or 755)
Code:
#!/system/bin/sh
setenforce 0
This way I can simply delete the permissiver script whenever I want.
I use CoolTool and to read some battery files, even having root privilegies, SELinux permissive is necessary.
Click to expand...
Click to collapse
So hey, I know this is a really old post and I realize that you might not reply but just trying to reach out anyway and confirm - just creating a script file like "permissiver.sh" in data/adb/post-fs-data.d with the right permissions will do the trick?
---------- Post added at 08:47 PM ---------- Previous post was at 08:08 PM ----------
stonedead said:
Flash this in twrp if you want permanent solution https://androidfilehost.com/?fid=3700668719832241024 or you can just set it using kernel manager like smartpack kernel manager or kernel adiutor (in misc section).
Click to expand...
Click to collapse
How would you uninstall if not needed?