n910G European Firmware? Please help stuck in Singapore - Android Q&A, Help & Troubleshooting

Hi,
First post here so please help.
I am in UK and have a note 4 n910G, i was running ok with UK SIM but had to hard reset due to crashing and freezing. Now it seems its reverted back to original csc and no matter which Firemware i flash (even tried CM14.1) the CSC doesnt change to European so i can chose BTU.
Im currently running
N910GDTU1BOC7
LRX22C.N910GDTU1BOE1
android 5.0.1
Ive searched for 2 weeks now and not getting anywhere, is there actually a firmware for Europe or do i have to flash seperate modem etc?
thanks
chris

Related

UK Firmware for P7500 - Please Help!

Hi,
I have been struggling for a while to get my Tab back to a factory state. I flashed the KI1 stock rom but it is an Italian Rom. I then tried to flask KG7 which again was an Italian rom, so I changed the CSC using a CSC changing app from the Android Store, which successfully changed the CSC to XEU (UK).
The problem is that now when I try and connect to Kies it says that this version of the tab can't be updated (I guess this is because of the way I changed the CSC). I would REALLY appreciate it if someone could point me in the right direction of an official UK Rom for the P7500, so that it can be updated in Kies. It is causing me a real headache!
Thanks
Surely someone can help out with this? I just need a stock UK rom that can be updated using Kies!
not sure if this helps ...but sammobile has a list of firmwares to download, you could try the version you had before you upgraded to KI1
http://www.sammobile.com/threads/328-Samsung-P7500-Galaxy-Tab-10.1-Firmwares.
I had a version of KG7 - I tried flashing that one from samfirmware, but the CSC was Italian. I changed the CSC to XEU (UK) which worked, but the tab couldn't then be updated in Kies.
im one step behind! Flashed to KI1 and wanting to change.. I shall watch this post!

[Q] Flashing Australian S3

Hey guys!
So I've had my S3 for a few weeks now and i bought it online from Kogan and assumed that the CSC would be XSA because i chose Australia for the firmware update thing when i first booted my phone up.
However Kies shows my phone as being ORS which is the CSC for Slovakia.
I decided that I'm going to flash my phone to another CSC but I'm stuck on whether to change it to XSA (Australian) or to flash an European stock ROM. This is because Australia is horribly slow at receiving updates and most countries in Europe are the first to get them.
So since I have never flashed my S3 before, I would really appreciate it if someone could explain how and where to download the appropriate files from. Basically I want to be able to get updates quickly without having problems here in Australia. Any comment is welcome.
Thanks!
you may find this thread helpful
http://forum.xda-developers.com/showthread.php?t=1683668
Australian Galaxy S3 Thread.
samuel9kim1 said:
Hey guys!
So I've had my S3 for a few weeks now and i bought it online from Kogan and assumed that the CSC would be XSA because i chose Australia for the firmware update thing when i first booted my phone up.
However Kies shows my phone as being ORS which is the CSC for Slovakia.
I decided that I'm going to flash my phone to another CSC but I'm stuck on whether to change it to XSA (Australian) or to flash an European stock ROM. This is because Australia is horribly slow at receiving updates and most countries in Europe are the first to get them.
So since I have never flashed my S3 before, I would really appreciate it if someone could explain how and where to download the appropriate files from. Basically I want to be able to get updates quickly without having problems here in Australia. Any comment is welcome.
Thanks!
Click to expand...
Click to collapse
If you want JB now you need to flash the Polish ROM, either ICS and update or just flash one of the ODIN images. Or you can use a custom ROM based on that official release. Start with the sticky threads, then have a look in the development forum.

Product code and Csc does'nt change back to my region!!

Hi I'm from Pakistan and I bought a new Galaxy Alpha (G850F) around 2 months ago and here we still haven't received lollipop update so I flashed an XSG (Dubai) stock firmware (Lollipop 5.0.2) but the problem is it's a bit laggy and my phone becomes hot sometimes.... So I flashed back to KitKat stock firmware for my region but my product code and csc does not change back to my region's code and it keeps on showing me the lollipop update!! So plz tell me a way to flash my region's stock rom so that my product code and csc changes back too!!
Any help would be appreciated!!
Thanks!!
MNQ27 said:
Hi I'm from Pakistan and I bought a new Galaxy Alpha (G850F) around 2 months ago and here we still haven't received lollipop update so I flashed an XSG (Dubai) stock firmware (Lollipop 5.0.2) but the problem is it's a bit laggy and my phone becomes hot sometimes.... So I flashed back to KitKat stock firmware for my region but my product code and csc does not change back to my region's code and it keeps on showing me the lollipop update!! So plz tell me a way to flash my region's stock rom so that my product code and csc changes back too!!
Any help would be appreciated!!
Thanks!!
Click to expand...
Click to collapse
Go to SAMMOBILE and look for your firmware. Flash it via ODIN. After that, reset the phone to factory settings.
Yeah I did that but still my product code and csc didn't change!!
UniversalKID said:
Go to SAMMOBILE and look for your firmware. Flash it via ODIN. After that, reset the phone to factory settings.
Click to expand...
Click to collapse
Yeah I did that but still my product code and csc didn't change!
I have the same issue, is there any solution?

SIM card wont register on phone.

Hey all..
I had a weird thing happen to me today, my s3 GT-i9300 wont register the sim at all it all started when I flashed 4.3 from 4.0 today I've tried everything possible to get the sim to register. In all honesty, I've become discouraged and would be happy to just get back to stock rom... at least the network was working. lol
Originally I bought this s3 in HONG KONG, the baseband version that I flashed 4.3 is from Kazakhstan.. So I went over to http://samsung-updates.com/device/?id=GT-I9300 and found that TGY (Hong Kong) has 3 firmwares: I9300ZSUBNB1- 4.3- 26.02.2014 and I9300ZSEMK3- 4.1.2- 06.11.2013 and I9300ZSEMC1- 4.1.2- 11.03.2013
Question: Which one do I use? and what would be the steps in fixing this problem?
Heres my info:
IMEIs match on BOTH in status of phone and on the back of the phone
Im currently on 4.3 Android Version
Current Baseband version: I9300xxugna8 [Kazakhstan]
Cell phone carrier: Mobilicity (Which is owned by Rogers)
Thanks for all the patience and help in advance.
Cheers.
Nevermind gents, found the solution. ANDDDDDDD the best part is.. I can stick with the 4.3... [sarcastic YAY]
Solution thanks to the folks at AndroidVeterans
Maybe the ROM you used is not Stable 100% that's why u faced that problem. So the solution is to back to your stock ROM with the official baseband that it was installed before you upgrade. in my opinion if you flashed a stock ROM with the wrong baseband can make your device unsupportable to the network (even you flashed many ROMs the problem will still exists)
iKilla13 said:
Hey all..
I had a weird thing happen to me today, my s3 GT-i9300 wont register the sim at all it all started when I flashed 4.3 from 4.0 today I've tried everything possible to get the sim to register. In all honesty, I've become discouraged and would be happy to just get back to stock rom... at least the network was working. lol
Originally I bought this s3 in HONG KONG, the baseband version that I flashed 4.3 is from Kazakhstan.. So I went over to http://samsung-updates.com/device/?id=GT-I9300 and found that TGY (Hong Kong) has 3 firmwares: I9300ZSUBNB1- 4.3- 26.02.2014 and I9300ZSEMK3- 4.1.2- 06.11.2013 and I9300ZSEMC1- 4.1.2- 11.03.2013
Question: Which one do I use? and what would be the steps in fixing this problem?
Heres my info:
IMEIs match on BOTH in status of phone and on the back of the phone
Im currently on 4.3 Android Version
Current Baseband version: I9300xxugna8 [Kazakhstan]
Cell phone carrier: Mobilicity (Which is owned by Rogers)
Thanks for all the patience and help in advance.
Cheers.
Click to expand...
Click to collapse
Don't panic bro ,international S3 had this problem on updating manually , not for custom roms only for stock 4.3
The only solution is z3x box , it can be only done using that box :good:
You have to only repair network from it

Reset S6 Edge

Hi,
I have had a S6 Edge for 2 years, I bought it from Samsung but flashed a Vodafone ROM onto it from Samfirmware. I have given it to my son who wants to use a BT Mobile SIM on the phone so I flashed the phone using a BTU ROM, again from Samfirmware. The phone is saying that it is locked. How is this possible if the phone has been flashed and factory reset? Can anyone help me get the phone unlocked as Vodafone's NUC is not working and they have no clue why it's not working.
ROM is G925FXXU5EQE7 and my CSC is BTU (multi-CSC).
Flashed from G925FXXU5EQE7_G925FBTU5EQD2_BTU
Thanks
SM
Silly Man said:
Hi,
I have had a S6 Edge for 2 years, I bought it from Samsung but flashed a Vodafone ROM onto it from Samfirmware. I have given it to my son who wants to use a BT Mobile SIM on the phone so I flashed the phone using a BTU ROM, again from Samfirmware. The phone is saying that it is locked. How is this possible if the phone has been flashed and factory reset? Can anyone help me get the phone unlocked as Vodafone's NUC is not working and they have no clue why it's not working.
ROM is G925FXXU5EQE7 and my CSC is BTU (multi-CSC).
Flashed from G925FXXU5EQE7_G925FBTU5EQD2_BTU
Thanks
SM
Click to expand...
Click to collapse
Take it to a Vodafone shop snd they should unlock it there and then.
BTU rom is not a BT mobile rom. Its just the csc of the firmware. The BTU rom is just generic uk firmware.

Categories

Resources