Related
Got an Oppo R9s through aliexpress. First time it arrived the home button wouldn't work, neither the fingerprint scanning. After sending it back and waiting three months I got a working device, but seems to have malware on it.
The lock screen is filled with chinese pictures. Doesn't seem malicious, but I can't remove it. After resetting the device to factory settings it's the first thing that installs itself after giving it network access. The wallpaper option in settings doesn't work. More importantly, when I add a phone contact, the phone app crashes opening as well as the contacts app, which renders the phone completely useless, not being able to make a simple phone call. Also, simple mode doesn't work either.
So my guess this is a modified rom to have some malware always present and basic functionality is either removed or crippled. Following instructions to enter fastboot mode (volume up + power on) seem to enter an endless loop, so it looks like this option is disabled. Using volume down I'm able to enter a recovery mode, where it says it's version 1.2 (root), and allows me to select some rom for flashing.
Before trying to wade through all the threads regarding rooting and flashing, I was considering simply replacing the ColorOS rom with a clean one. However I'm unable to find any for R9s, is it that this model doesn't have one available? Even looking at the international Oppo forums they don't have any R9s download links. So I guess I have to spend some hours reading and fishing links from long threads like https://forum.xda-developers.com/android/help/oppo-r9s-rooting-t3496781 ?
The about info of the device says this is an Oppo R9s, ColorOS v3.0, Android 6.0.1, MSM8953 OctaCore, 4GB ram, build number R9s_91_A.28_191025, baseband version Q_V1_P14,Q_V1_P14, Kernel 3.18.24-G201710252140.
romfury88 said:
Got an Oppo R9s through aliexpress. First time it arrived the home button wouldn't work, neither the fingerprint scanning. After sending it back and waiting three months I got a working device, but seems to have malware on it.
The lock screen is filled with chinese pictures. Doesn't seem malicious, but I can't remove it. After resetting the device to factory settings it's the first thing that installs itself after giving it network access. The wallpaper option in settings doesn't work. More importantly, when I add a phone contact, the phone app crashes opening as well as the contacts app, which renders the phone completely useless, not being able to make a simple phone call. Also, simple mode doesn't work either.
So my guess this is a modified rom to have some malware always present and basic functionality is either removed or crippled. Following instructions to enter fastboot mode (volume up + power on) seem to enter an endless loop, so it looks like this option is disabled. Using volume down I'm able to enter a recovery mode, where it says it's version 1.2 (root), and allows me to select some rom for flashing.
Before trying to wade through all the threads regarding rooting and flashing, I was considering simply replacing the ColorOS rom with a clean one. However I'm unable to find any for R9s, is it that this model doesn't have one available? Even looking at the international Oppo forums they don't have any R9s download links. So I guess I have to spend some hours reading and fishing links from long threads like https://forum.xda-developers.com/android/help/oppo-r9s-rooting-t3496781 ?
The about info of the device says this is an Oppo R9s, ColorOS v3.0, Android 6.0.1, MSM8953 OctaCore, 4GB ram, build number R9s_91_A.28_191025, baseband version Q_V1_P14,Q_V1_P14, Kernel 3.18.24-G201710252140.
Click to expand...
Click to collapse
Are you trying to replace the ROM or just remove the Malware? I've never heard of this device before so I can't point you towards any ROMs, But I can certainly help you remove Malware embedded in the ROM.
theashleyd123 said:
Are you trying to replace the ROM or just remove the Malware? I've never heard of this device before so I can't point you towards any ROMs, But I can certainly help you remove Malware embedded in the ROM.
Click to expand...
Click to collapse
I'm not interested in changing ROMs, just remove the malware that prevents normal device usage. That's why I was asking for links to ColorOS firmware, I presume reinstalling those would restore normal operation. However if that's not possible I'll take any non-malware ROM.
I followed the recommendation from http://community.oppo.com/en/forum.php?mod=viewthread&tid=50113 to use "adb shell" commands and disable ROM programs, finally getting to remove the lock screen pictures. After a while of having the phone turned on, I heard a weird ping sound and then the touch screen stopped responding. It works fine, since I can power off swiping to the right on the off screen, or I can swipe down and play with the toggles, but the launcher and settings app don't seem to receive touches. So maybe I disabled something affecting the screen? I did run:
adb shell pm hide com.android.browser
adb shell pm hide com.android.contacts
adb shell pm hide com.oppo.usercenter
adb shell pm hide com.nearme.gamecenter
adb shell pm hide com.nearme.atlas
adb shell pm hide com.nearme.statistics.rom
adb shell pm hide com.oppo.launcher
adb shell pm hide com.oppo.market
adb shell pm hide com.oppo.music
adb shell pm hide com.sohu.imputmethod.sogouoem
adb shell pm hide com.redteamobile.roaming
adb shell pm hide com.redteamobile.virtual.softsim
adb shell pm hide com.coloros.lives
adb shell pm hide com.nearme.themespace
adb shell pm hide com.nearme.themespacelib
adb shell pm hide com.coloros.pictorial
Rebooting or recovery mode doesn't work, so I figured to install a ROM from https://forum.xda-developers.com/showpost.php?p=70366156&postcount=13 in recovery mode (where the touch screen works fine). After installation the "optimizing android apps" kept there forever, so I turned it off/on manually, and now I launch into the original launcher with a few chinese icons, but still the screen doesn't seem to work.
Touches work for the notifications and such, but nothing for the launcher or settings, so now I'm unable to turn on USB debugging to send adb shell commands. :crying:
You've disabled your launcher and a couple of required android services (Browser etc) Use adb again to sideload a new launcher too.
---------- Post added at 10:44 AM ---------- Previous post was at 10:42 AM ----------
Also try reenabling the input method.
theashleyd123 said:
You've disabled your launcher and a couple of required android services (Browser etc) Use adb again to sideload a new launcher too.
I did these after installing replacements, like that post explained. Chrome as browser, Google APKs for contacts/calendar, Novo launcher instead of stock… and everything seemed to be working fine.
I can't enable debugging on the device, adb commands don't seem to reach the device. I've never used sideload before, does it work even without debug mode enabled?
Click to expand...
Click to collapse
romfury88 said:
theashleyd123 said:
You've disabled your launcher and a couple of required android services (Browser etc) Use adb again to sideload a new launcher too.
I did these after installing replacements, like that post explained. Chrome as browser, Google APKs for contacts/calendar, Novo launcher instead of stock… and everything seemed to be working fine.
I can't enable debugging on the device, adb commands don't seem to reach the device. I've never used sideload before, does it work even without debug mode enabled?
Click to expand...
Click to collapse
You can sideload an app via recovery by pushing it to /system/app
And then use adb shell chmod 644 "/system/app/APKNAME"
Click to expand...
Click to collapse
theashleyd123 said:
romfury88 said:
You can sideload an app via recovery by pushing it to /system/app
And then use adb shell chmod 644 "/system/app/APKNAME"
Click to expand...
Click to collapse
I can't due to adb not being able to connect to the device, since I can't put it in debug mode. When the device is in recovery mode I can't access it either, I only get "- waiting for device -"
Click to expand...
Click to collapse
Finally managed to flash a good original ROM on the device. Conveniently the chinese rom prevents running dangerous adb commands, but at least I seem to have gotten rid of the malware and I'm able to change desktop wallpapers and the lockscreen magazine
$ adb shell pm hide com.oppo.music
Error: java.lang.SecurityException: Neither user 2000 nor current process has android.permission.MANAGE_USERS.
Click to expand...
Click to collapse
romfury88 said:
Finally managed to flash a good original ROM on the device. Conveniently the chinese rom prevents running dangerous adb commands, but at least I seem to have gotten rid of the malware and I'm able to change desktop wallpapers and the lockscreen magazine
Click to expand...
Click to collapse
hi romfury88 how did u manage to flash original ROM can u guide me pls. thanks
Oppo R9S
ulyong23 said:
hi romfury88 how did u manage to flash original ROM can u guide me pls. thanks
Click to expand...
Click to collapse
Just bought an OPPO R9S and was wondering you managed to flash the original ROM? I have the exact same issues that romfury had.
So recently i wanted to change my S9 navigation bar color and i tried to use adb shell. All worked fine, i was using these commands:
adb shell
settings put global navigationbar_color <insert value>
settings put global navigationbar_current_color <insert value>
So i read that i if i insert a wrong value then phone may crash and never boot. So I accidentaly pressed CTRL-V (windows cmd prompt) and pressed enter, it didnt paste code but paste ^V symbol instead of color decimal number, so i ended with crashed phone which is not booting now. (Blue led light with samsung logo endless staying on screen).
I really need help to recover all this. I dont want to reset my phone, i want just to change that value back to proper number, but i cant find a way to do. Tried to access phone storage to use sqlite3 on file where global setting is stored, but phone not showing in windows explorer or samsung smart switch.
I just want to find these two strings and add the old value back to them. I dont want to reset phone and loose information just for 2 variables.
P.S. I thought maybe i can create an .apk that change nav bar color's value back and using adb sideload to load it ? I dont know if that's possible.
All, I have found a solution to get this P-WAL-107-ELC-02 unlocked and usable!
Original post:
I acquired a used Outcome Health (Contextmedia) Wallboard. There have been other posts previously about unlocking the 10 and 13inch tablets, but the steps and procedures used did not work with this wallboard.
The model number is P-WAL-107-ELC-02, and is similar to the item found here: https:// fccid.io/ 2AI6X-PWALELC
It is running on Android 4.4.4
I can open the "secret" configuration menu built into the app, but all the functions are password protected. I've had no success accessing the default android settings menu either. If you close the app, it launches again immediately, and the status bar seems to be locked down so that it can't be expanded.
EDIT: I've tried using a USB keyboard, and used the settings hotkey but no luck with this either. Using the home button pushes a message at the bottom of the screen "Override Launch." I also tried generic passwords in the various menus, but nothing has worked so far.
Any suggestions or experience with these items is greatly appreciated, thank you!
Click to expand...
Click to collapse
Disclaimer:
This is a collection of the methods that worked successfully in my case. I am assuming anyone using this has an understanding of the use of ADB and shell commands. If not, please do your research to better understand the use of the command line, otherwise you may cause more damage then actual repair. Perform the actions followed at your own risk.
Rebooting into safe mode and removing contextmedia applications:
With the help of information in this thread: https://forum.xda-developers.com/android/help/android-4-4-4-context-media-10-tablet-t3670769 I got it working.
With the wallboard connected to the pc, I restarted the device and repeatedly pressed the power button until it finished booting and it started in safe mode! I was able to open the android settings, uninstall the contextmedia app and the zygote app, access dev options and enable debugging.
Connected to the PC and in debugging mode run the following to remove the synop and the remainder of the contextmedia applications.
adb reboot root //Worked in my case, confirmed root access.
adb shell
[email protected]:/ $ su //Root permissions in shell
[email protected]:/ # rm data/dalvik-cache/[email protected]@[email protected]
[email protected]:/ # rm data/dalvik-cache/[email protected]@[email protected]
[email protected]:/ # rm -r data/data/com.contextmediainc.system.synop
After that, it should let you simply uninstall or disable everything else.
With that removed, you should be able to install any compatible launcher (I used nova launcher at the time of writing this) with the adb install commands.
Flashing TWRP recovery and installing open Gapps:
I finally got a working TWRP recovery using the TWRP_2.8.7.0_RK32.img, using the method show here https://blog.matt.wf/flash-your-recovery-image-via-adb-shell-on-android/
Generic RK32 with SDcard - http://www.freak-tab.de/abdul_pt/TWRP/Generic/TWRP_2.8.7.0_RK32_SDcard.img
Generic RK32 with Unified Storage - http://www.freak-tab.de/abdul_pt/TWRP/Generic/TWRP_2.8.7.0_RK32_DATAMEDIA.img
Turns out the manufacture is Rockchip and the series is an rk3288.
Flash your recovery image via adb shell on android
JANUARY 16, 2017
//edit: You need a rooted device for this kind of flashing
Hi, ever wondered about how you can flash a recovery.img via adb shell?
A lot of posts suggest flashing it via fastboot. Well my ****ty Samsung phone is not detected by fastboot. Then there is the option to install a dubious binary file which is called flash_image.. thank u internet!
Well damn I have the recover.img whats so hard to use dd and flash it with a single shell command? For those who don't know much about linux commands here we go;
Enable your USB debugging bridge in switch via adb to the terminal:
./adb shell
Then you should be able to find your recovery partion with:
DEV=$(ls /dev/block/platform/*/by-name/recovery); echo $DEV
that should output something like this:
/dev/block/platform/7824900.sdhci/by-name/recovery
If this is the case you only have to put the recovery.img on your sd-card or the internal storage and you are one command from flashing:
dd of=$DEV if=/external_sd/recovery.img
Thats it! No binaries you have to install. No ****ty fastboot udev rules :S
You can enter into your new recovery system with:
./adb reboot recovery
Click to expand...
Click to collapse
With that, I could flash the gapps from the recovery and now the play store and services are working seamlessly. With the exception of the home and recent buttons not doing anything, this one is completely usable now.
Install SuperSu if you want to maintain permanent root on the device!
Download links:
Generic RK32 with SDcard - http://www.freak-tab.de/abdul_pt/TWRP/Generic/TWRP_2.8.7.0_RK32_SDcard.img
Generic RK32 with Unified Storage - http://www.freak-tab.de/abdul_pt/TWRP/Generic/TWRP_2.8.7.0_RK32_DATAMEDIA.img
Nova Launcher - https://nova-launcher.en.uptodown.com/android
SuperSu - https://supersu.en.uptodown.com/android
Recovery Reboot - https://apkpure.com/recovery-reboot/gt.recovery.reboot
Droid Hardware Info - https://droid-info.en.uptodown.com/android
Open Gapps - Platform: ARM Android: 4.4 Variant:Nano - https://opengapps.org/
No suggestions, but what a cool find. I'm surprised that hospitals use Android smart TVs! Or is it a giant tablet?
Sent from my LM-V350ULM using Tapatalk
jwrezz said:
No suggestions, but what a cool find. I'm surprised that hospitals use Android smart TVs! Or is it a giant tablet?
Sent from my LM-V350ULM using Tapatalk
Click to expand...
Click to collapse
It seems more like a giant tablet. I saved it from the dumpster hoping it could be turned into a nice web surfing machine for the garage.
slaysher62 said:
It seems more like a giant tablet. I saved it from the dumpster hoping it could be turned into a nice web surfing machine for the garage.
Click to expand...
Click to collapse
That would be awesome.
Sent from my LM-V350ULM using Tapatalk
bump
How often do I click the power button when it is booting, to get into safe mode? It just keeps going back to the home screen for me. Also, which USB did you have connected to the PC while doing this?
I am having the same issue
Any further update or progress on this from anyone? This would be perfect for a garage (or wherever) media center.
Any idea where I can find the recovery file? I tried to obtain one via TWRP and no luck.
I was able to install nova laucher and delete the files in data using adb shell. I'm just stuck at the recovery image part.
---------- Post added at 01:11 AM ---------- Previous post was at 12:20 AM ----------
Freak-tab .de website is down. Can someone please send me the image recovery file? Thanks in advance.
slaysher62 said:
bump
Click to expand...
Click to collapse
I'm able to get mine to the Recovery System but I cant run adb shell as I get exec '/system/bin/sh' which is no root. But I can't get into Safe Mode. I have the 32" Wallboard too but mine is ELC-01. What power button combo did you use to get into Safe Mode?
Plug in power and then just mash the power button? When do you stop mashing it?
Mash it as you plug in power and keep mashing?
Plug in power as you hold the power button down?
Stop mashing when it flickers or the screen is white?
Can’t get in to the settings.
ttiimmmmyy said:
How often do I click the power button when it is booting, to get into safe mode? It just keeps going back to the home screen for me. Also, which USB did you have connected to the PC while doing this?
Click to expand...
Click to collapse
Can’t get into settings. Tried the power button variations, with and without mini usb plugged in to the pc.
Wallboard
There are some typos in the original post commands. I wasn't having any luck with the "rm" commands to remove "zygote" and "sysop" apps, so I used the "ls" and "cd" commands to see what the file names were.
Removing the second file should be "[email protected]:/ # rm data/dalvik-cache/[email protected]@[email protected]" , the third should be "[email protected]:/ # rm -r data/data/com.contextmediainc.system.sysop"
When you type the command "DEV=$(ls /dev/block/platform/*/by-name/recovery); echo $DEV" you'll get an output, type that output into the next command. ex: dd of="output of previous command".
If you just drop the TWRP onto the USB mass storage drive that appears when you connect the tablet, it will be in "/sdcard" folder. The final command will be something like: dd of="output of previous command" if=/sdcard/RK32.img. If you don't have root access it will tell you "permission denied", so make sure you use the command "su" after "adb shell".
Lastly, I accidentally found that when I performed a factory reset via TWRP recovery menu that the Home button started working. It may also work via the settings menu, but I didn't try it that way.
Anyway, hats off to OP for posting this as it gives use to these massive android tablets.
The secret password is cat10dog
Kinda stuck...
Hey Slaysher62. I'm kinda stuck. Was wondering if you could help me out. I have a few of these due to our hospital just not needing them anymore and telling me I could either keep them or throw them away. I've tried for weeks to replicate your success but I feel like I'm missing a few steps. If you could Message me or something that'd be great.
Thanks,
Pinball Wizard
slaysher62 said:
All, I have found a solution to get this P-WAL-107-ELC-02 unlocked and usable!
Original post:
Disclaimer:
This is a collection of the methods that worked successfully in my case. I am assuming anyone using this has an understanding of the use of ADB and shell commands. If not, please do your research to better understand the use of the command line, otherwise you may cause more damage then actual repair. Perform the actions followed at your own risk.
Rebooting into safe mode and removing contextmedia applications:
With the help of information in this thread: https://forum.xda-developers.com/android/help/android-4-4-4-context-media-10-tablet-t3670769 I got it working.
With the wallboard connected to the pc, I restarted the device and repeatedly pressed the power button until it finished booting and it started in safe mode! I was able to open the android settings, uninstall the contextmedia app and the zygote app, access dev options and enable debugging.
Connected to the PC and in debugging mode run the following to remove the synop and the remainder of the contextmedia applications.
adb reboot root //Worked in my case, confirmed root access.
adb shell
[email protected]:/ $ su //Root permissions in shell
[email protected]:/ # rm data/dalvik-cache/[email protected]@[email protected]
[email protected]:/ # rm data/dalvik-cache/[email protected]@[email protected]
[email protected]:/ # rm -r data/data/com.contextmediainc.system.synop
After that, it should let you simply uninstall or disable everything else.
With that removed, you should be able to install any compatible launcher (I used nova launcher at the time of writing this) with the adb install commands.
Flashing TWRP recovery and installing open Gapps:
I finally got a working TWRP recovery using the TWRP_2.8.7.0_RK32.img, using the method show here https://blog.matt.wf/flash-your-recovery-image-via-adb-shell-on-android/
Generic RK32 with SDcard - http://www.freak-tab.de/abdul_pt/TWRP/Generic/TWRP_2.8.7.0_RK32_SDcard.img
Generic RK32 with Unified Storage - http://www.freak-tab.de/abdul_pt/TWRP/Generic/TWRP_2.8.7.0_RK32_DATAMEDIA.img
Turns out the manufacture is Rockchip and the series is an rk3288.
With that, I could flash the gapps from the recovery and now the play store and services are working seamlessly. With the exception of the home and recent buttons not doing anything, this one is completely usable now.
Install SuperSu if you want to maintain permanent root on the device!
Download links:
Generic RK32 with SDcard - http://www.freak-tab.de/abdul_pt/TWRP/Generic/TWRP_2.8.7.0_RK32_SDcard.img
Generic RK32 with Unified Storage - http://www.freak-tab.de/abdul_pt/TWRP/Generic/TWRP_2.8.7.0_RK32_DATAMEDIA.img
Nova Launcher - https://nova-launcher.en.uptodown.com/android
SuperSu - https://supersu.en.uptodown.com/android
Recovery Reboot - https://apkpure.com/recovery-reboot/gt.recovery.reboot
Droid Hardware Info - https://droid-info.en.uptodown.com/android
Open Gapps - Platform: ARM Android: 4.4 Variant:Nano - https://opengapps.org/
Click to expand...
Click to collapse
Help with recovery
Recently acquired 3 of these 32-inch screens at first I wasn't able to get into safe mode but I deleted everything off the sd card and restarted the screen after that spamming the power button worked and I was able to get the app uninstalled and Nova launcher installed but what I'm having an issue with is getting TWRP to install also I noticed mine isn't a RK3288 its a RK3188
I've tried to flash all the TWRP RK3188 recoveries I could find but none of them work just puts the screen into a boot loop until removing power and restarting
any update from android 4.4
was anyone able to get any operating system installed on this besides andriod4.4? trying to decide if I am going to just use the screen and install a new mini board to install android 10 or chrome os
---------- Post added at 07:41 PM ---------- Previous post was at 07:36 PM ----------
to get to the secret menu . power on "tablet", wait till the program is running . you will see a logo close to the bottom right hand corner. keep pressing it until the menu pops up. to get into the actual settings I can't remember what it was called but I should be something like device admin or such on the right hand sign. click it. it will ask for password ( cat10dog ) from there you should be able to follow the instructions above
Uit232b-u03
Thought I'd chime in; I have one of these wallboards, model # UIT232B-U03, nominally equipped with an RK3188. Here's what I've found:
Misc. Device Info
RIL Ver: KitKat ril-rk29-dataonly v3.3.00
Build No.: Z05-outform-32-B4.21-20160324
Build Fingerprint: rockchip/rk3188/rk3188:4.4.4/KTU8Q/eng.root.20151208.162319.eng/test-keys
Board / Chipset: rk30sdk / RK30board
As you might notice from the Build Fingerprint, this model appears to be running an engineering build of Outcome/ContextMedia's KitKat ROM; this screen was pulled from a working clinic, but USB debugging was already enabled and connecting via adb shell automatically dumps you into a root shell. There's nothing more you need to do to gain that access.
The device info (courtesy of Droid Info) references three different RK chips in a few places: RIL Ver. (rk29); board & chipset (rk30); and everywhere else (rk3188, specifically). I don't know what to make of that. Maybe something to do with it being an engineer build? Could be an engineering sample board, too -- I need to check for that info.
Personalization
As mentioned, it looks like this unit (and maybe other UIT2xx-xxx revisions) appears to come pre-rooted with USB debugging already enabled. There's no need to authorize any given machine on the tablet when connecting over ADB for the first time, either. If you still want/need to access the system settings, three-finger-tap on the application logo in the bottom-right of the screen (tapping multiple times will just cause a credits list to pop up). The password to leave the application for the Android system settings is cat10dog, as has been noted elsewhere.
Before I loaded anything new, I went ahead and factory reset it to see what it looked like. Upon doing so, the only system application was Zygote -- it looks like it's a modified version which is serving as the "launcher" for this tablet, and which forcibly reloads the application whenever it is closed for whatever reason. From factory reset, it will launch into a first-time setup screen, where it looks like you can configure the application and get connected to wifi/ethernet and download the remaining system apps (this is my impression; I didn't go through with it, but I imagine the application will want to verify a license or something). Uninstalling the modified Zygote seems to not kill the first-time setup screen (makes sense -- it's meant to stay resident and likely has everything it needs loaded into RAM at the time), but you can install Nova Launcher 5.3 (last version to support KitKat 4.4.4) and then Zygote fully disappears and you won't get bothered about setup anymore. (I have no idea what happens if you remove Zygote and then don't install a launcher. You can probably still connect over ADB, but I've never seen a launcher-less Android.) Other apps can be installed at this time, too.
As noted elsewhere, the Home and Recents soft buttons still do not work. I'm not 100% sure, but I think that's something stuffed in the ROM itself and may not be configurable (maybe through the commandline?). But, you can just use the Back button to go back to the home page at any point.
I have not had any success installing TWRP: It turns out, despite the chip being labeled in all ways as an RK3188, it is in fact a lower-specced RK3188T (1.4Ghz top speed). Every version of TWRP for the RK3188 I've tried has resulted either in a bootloop (unplug from power and plug back in to return to system), or a black screen, or the TWRP splash screen but which never progresses beyond that step. (This reminds me, I need to check on the black screen instances to see if the recovery executable is running at all, and what happens when I try to manually start it.)
On the off-chance anyone has a TWRP build for the RK3188T for me to try, I'd definitely appreciate it! Or indeed any ARMv7-based build, if I'm just going to be blindly loading recoveries to see what happens. (If anyone has any advice for debugging the recovery loading process, I'm rather a noob at this and could use any information about where to look for logging info, or to make it output a log at all if it doesn't by default.)
OH, and uh... if anyone has a stock version of the recovery partition, could you send it to me? I didn't back it up before writing over it...
Other than not getting to install TWRP and get all experimental with ROMs, it is usable in its current state as an old-but-servicable, pre-rooted-for-your-convenience-no-supersu-required, massive Android tablet. Too bad Pocket Camp requires Android 5 since a few builds ago...
Edits for grammar, spelling, extra info.
theugly_bear said:
was anyone able to get any operating system installed on this besides andriod4.4? trying to decide if I am going to just use the screen and install a new mini board to install android 10 or chrome os
---------- Post added at 07:41 PM ---------- Previous post was at 07:36 PM ----------
to get to the secret menu . power on "tablet", wait till the program is running . you will see a logo close to the bottom right hand corner. keep pressing it until the menu pops up. to get into the actual settings I can't remember what it was called but I should be something like device admin or such on the right hand sign. click it. it will ask for password ( cat10dog ) from there you should be able to follow the instructions above
Click to expand...
Click to collapse
device configuration and also just to clarify what he meant was tap on that flower looking logo repeatedly until you get the secret device configuration then on top right corner theres 3 lines select network settings and it should ask for a password which is cat10dog
And now I'm stuck
If anyone could give me direction/etc to get past where I'm at, I'd appreciate it.
I bought one of these bad boys from an auction and thankfully found this post and started the task of customizing it. I got to the point to where I deleted the apps listed, all through adb reboot recovery (used Generic RK32 with SDcard).
However, on reboot, it didn't go into recovery and had the Context Health splash to a nature backdrop and an Error: Wallboard not installed message. USB debug wasn't persistent, and trying everything that worked previously, I can't seem to get into Safe Mode, and I haven't found any other ways to get into Settings.
I did find the "reset" hole on back, which otherwise functions as a hardware 'Volume Up', but have yet to find any [Boot to Recover] methods involving only Volume Up and Power that work.
Any ideas of things to try?
Thank you
Update 1: Still no luck overall, but somewhat of progress, I hope: Plugging in the DC automatically boots up everything. If I hold down the hardware volume up/reset while adding power AND have USB plugged in, I get a listing in Device Manager; however, the screen stays black. Otherwise, as far as getting my PC to notice it, this is the only means to do it. There is no connection when powered on normally, rather I plug in USB before or after providing power. Also, spamming the power button while booting in order to get into Safe Mode had worked initially. Now doing it causing a freeze on the second or third splash screen refresh.
So I have recently acquired a bunch (50+) of these 32" screens. They were pre-rooted as @dwkindig had mentioned. I was able to remove all of the Context media apps and unlock the functionality as a basic android tablet pretty quickly. Threw Nova launcher on it and they work great. Has anyone had success in getting anything above Android 4.4 on these? I have a ton and can pull any files that would be of help to do some digging here, so please let me know. I would love to at least get Lollipop on these so that Android Webview could be upgraded and I could use the Wallpanel app for dashboard use on these. Any suggestions or help I can offer?
As I am posting on XDA its obvious that I am into custom rom and development.
So, the reason I'm writing this post its because I recently faced a problem that I found wierd. As I am always flashing custom rom and always switching back and fourth. While doing so I seen that some quick settings tiles are missing in custom roms.
I thought it was problem with custom roms but after some research I found that many other phones are also facing such kind of problems. Android has a bug that causes such issue.
So to fix such there are three solutions
1. The easiest way is to factory reset your device but the downside of this solution is that you will loose your data
2. Second method is by rooting your device and using terminal
Open terminal in android
type
Code:
su
to give root permissions
Code:
settings get secure sysui_qs_tiles
type above line to get the current quick setting tile name if you skip this step you will loose your current tiles
Code:
settings put secure sysui_qs_tiles "YOUROLDLIST,MobileData,Hotspot"
and after following above steps u need to reboot your device
3. Next method is by setting up adb
install adb on your desired system
open cmd or terminal and type
Code:
adb devices
if your device is listed type
Code:
adb shell
and type above two commands
Code:
settings get secure sysui_qs_tiles
Code:
settings put secure sysui_qs_tiles "YOUROLDLIST,MobileData,Hotspot"
YOUROLDLIST= list which you obtain by typing previous command
Code:
adb reboot
the most secure method of above three is last one which is using adb
U will need to find names for specific tiles which is used to restore QS Tiles.
I will try to post all possible tile names.
Name of power menu
Thank you Sv Surve. I also have the same issue. The Power Menu Tile missing in the Quick Settings. I prefer the ADB methode. So what is the name of Power Menu to write in ADB? By the way, my phone is Mi 10 unrooted. So, can use ADB for this?
Ok lets first explain the situation
I've been dabbling with Tasker (Paid for version)- getting some automation depending on certain situations (mainly stuff like 'If I'm @ {location} get volumes set high' or ' If Unread msg then vibrate my Amazefit bip watch' - Nothing too complicated using variables / javascript etc)
One situation I want to attempt though is 'If Gpay app is started - turn on NFC, but when I leave the app - turn NFC off'
Now I already know there are 2 'main' ways I can turn on/off NFC in Tasker.. either use 'AutoInput plugin' or use 'Secure Settings'
- I've tried with Autoinput plugin but the problem is that with the free option, you need to watch an Ad every day to use it but of course I can pay for it (its only a couple of quid)
However you can't Install it & pay for it directly from within the plugin - you need to install yet another App (AutoApps) first - & although this one is free - I just don't like adding more bloat to my phone than necessary. Adding both the plugin & this additional App adds (although only a 'minor' amount) up to 20Mb
The other method is give Tasker 'Secure settings' permission
- So I read the 'What to do to give 'Write Secure Settings Permission' to Tasker' (enable Developer mode > Usb Debugging > Install ADB on PC etc etc) & it looks simple enough,
But (a loooong time ago) I tried other 'hacks' & it ended up disastrously (probably I did something wrong with missing a step or something) & I just want to make sure that it IS as simple as it seems and also ask how safe is it
for example
* If I type in the command in ADB - could something go wrong & could it crash/brick the phone ?
* Is this permanent - ie if I turn off/on phone or if I get an OTA update & phone restarts - will it stay, or will I have to repeat the ADB command each time ?
* Will this 'break' official OTA updates (whether security &/or Android firmware) - I once did a firmware update with a step that used ADB (IIRC) & it broke something that prevented any updates from happening
- official OR manual firmware updates
Any help/advice would be appreciated
Cannon_Foddr said:
* If I type in the command in ADB - could something go wrong & could it crash/brick the phone ?
* Is this permanent - ie if I turn off/on phone or if I get an OTA update & phone restarts - will it stay, or will I have to repeat the ADB command each time ?
* Will this 'break' official OTA updates (whether security &/or Android firmware) - I once did a firmware update with a step that used ADB (IIRC) & it broke something that prevented any updates from happening
- official OR manual firmware updates
Click to expand...
Click to collapse
ADB is the door to your phone's Android. It's a tool not meant to be used by John Doe. Wrongly used you can brick your phone. Hence it's by default disabled.
1. Yes, using ADB you can render your phone absolutely useless. If you e.g. enter
Code:
adb shell rm -rf /
then phone gets totally wiped ( really all gets destroyed, it gets naked ) - you can throw it into electric waste.
2. ADB commands aren't persistent, but their results may be.
3. ADB itself breaks nothing: it's a driver installed on your computer that let you access Android's files and launch Android executables.
Thanks for the reply
I doubt I'll use THAT command.
I forgot to mention what tasker's command is
adb shell pm grant net.dinglisch.android.taskerm android.permission.WRITE_SECURE_SETTINGS
Not 100% sure about your last comment though.
ADB allows access to android files so changing android files could break things, which I'm worried about especially with OTA updates etc. (my last phone stopped getting OTA updates when I rooted it despite using official firmware)
However IF I understand the above command all this does is tell the android operating system ('android') to only give the tasker app (which 'Real' name is 'net.dinglisch.android.taskerm') the rights ('permission') to access the required settings ('WRITE_SECURE_SETTINGS') which the NFC on/off toggle is part of (settings >connected devices > connection preferences> nfc) & 'shouldn' t' affect any other files such as OTA (unless OTA is also part of secure setting?)
@Cannon_Foddr
As I can see you until now haven't understood what ADB is, how it works.
Same probably your understanding of what an OTA is.
Personally never would allow 3rd-party apps ( like Tasker ) to modify sensible system settings: Tasker isn't an open-source app, so you can't control what it does in the last run.
It's simply on you to decide whether Tasker is given that right, or not ...
Can't see why 'open-source' has to do with this
IMHO if Open-source - anyone can release similar apps with added extra hidden code that could spy's on you/steal info etc, but a 'closed sourced' app from a long running developer (tasker been around for 10yrs with over 1mil downloads) must mean people seem to trust him/them & if he was 'dodgy' surely he would've been caught out by now
Anyway the Bottom line seems to be
Safe route: pay for plugin & live with extra bloatware
Or
Risky route: give access to secure system resources, see what happens & keep fingers cross nothing does
Thanks for your replies.. I think I may have to sit down & have a long hard think which route I feel more comfortable with
I have been using Automate for about 4 months now. I granted it WRITE_SECURE_SETTINGS and I have not noticed any modifications in my system. Granted I may have not looked specifically for them but as far as braking the system or disruption of OTAs no issues so far
DennisHarrows said:
I have been using Automate for about 4 months now. I granted it WRITE_SECURE_SETTINGS and I have not noticed any modifications in my system. Granted I may have not looked specifically for them but as far as braking the system or disruption of OTAs no issues so far
Click to expand...
Click to collapse
I assume you had to do something like Taskers command then to grant the secure settings
( "adb shell pm grant net.dinglisch.android.taskerm android.permission.WRITE_SECURE_SETTINGS" )
Cannon_Foddr said:
I assume you had to do something like Taskers command then to grant the secure settings
( "adb shell pm grant net.dinglisch.android.taskerm android.permission.WRITE_SECURE_SETTINGS" )
Click to expand...
Click to collapse
Automate is straight forward, there is a toggle for "modify system settings" needed for some tasks to run and one you run the ADB command, it's done