Hello all,
Mirroring through miracast works fine now! I managed to fix the issue I faced with trying to mirror the phone with miracast.
The phone I bought from China came with apparently some manually altered rom. It didn't have much of the bloatware of the Nubia stock firmware. Also, it did not come with the "screen projection" app of Nubia. This app seems to be integrated into the phone. I couldn't find any .apk of it online. I tried a bunch of different apps, none worked. Also, factory resets, did not reinstall that app either.
The solution was simple. I used TWRP to wipe the phone and install the latest (v2.23) rom from the official nubia website: http://ui.nubia.cn/rom/detail/56
After installing it, the app was there and worked instantly.
At the moment now I have some issues with TWRP. I will fix it and see if the build.prop presisted through all of this, I doubt it.
If it did, and any changes are still required, I will update the post.
Kind regards,
Rup7ur3
---- initial post ----
Dear folks,
I'm trying to fix miracast on the Nubia Z18 (NX606J). Currently when I try mirror with the use of wi-fi direct, it doesn't show the miracast dongle I use (anycast).
I've not any experience in this and am trying to google for solutions. Online I have found some answers, but it's not yet working.
Hopefully I'm on the right path, but if anyone can help, it's greatly appreciated.
Why
The reason I want to use miracast, is to stream content to a portable display without the use of internet (so by cable or with WIDI). I don't think this phone supports hdmi/display port. If someone manages to get mirroring to work over cable, please let me know. As for WIDI, I think miracast is the only option? So, my bets are on this horse and I'm trying to make it run. Also, I'm new to this forum. If I post this at the wrong place, please forgive me. I created this thread for this specific model, because the manufacturer, Nubia, creates it's own (quite elaborate) UI on top of stock android. I suspect this could be part of the issue.
Summary so far
What I tried so far, is to install the custom recovery image of TWRP on my smartphone and adb + drivers on my windows 10 pc. Next I used the "mount" option in TWRP to enable adjustments of system files. The file I changed is the /system/build.prop file. I pulled the file using adb commands. Then changed the file on my pc and pushed it back to the phone. I will describe it in detail below. Yet, the sad thing is: it does not work. On another, older, model of the Nubia Z line, the Z9 mini, it did work.
Details
I installed drivers & adb/fastboot and twrp.
TWRP: https://forum.xda-developers.com/nubia-z18/development/recovery-twrp-nubia-z18nx606j-t3882098
Drivers & adb/fastboot: https://bbs.app.nubia.cn/forum.php?mod=viewthread&tid=1412934 (in chrome download didnt start for me, had to use firefox)
Once the above were installed, I connected my phone with the pc. I put phone settings in developer options to enable usb debugging. I got a notification to let my pc debug the phone, and accepted. Next I enabled "wireless display certification", "OEM unlocking" and set usb configuration to "MTP" instead of charging.
The adb on my pc was installed on my C:\adb\ folder. In the folder hold shift & right click, select open powershell or adb. I checked if my phone was connected using "adb devices". It listed my phone. So I went on and put it in fastboot mode (hold power + decrease volume). I checked if adb recognized fastboot with "fastboot devices". It listed my phone. Then next I unlocked the phone and installed TWRP with the help of this guide, from step 2 onwards: https://bbs.app.nubia.cn/forum.php?mod=viewthread&tid=1412934
Once TWRP installed. I created a backup of the phone through there. Then I selected the tab "mount" and enabled the system folder. Back to adb, I ran the command "adb devices" to see if my phone was listed, it was. Then I ran the command "adb pull /system/build.prop" that copied the build.prop file to my c:\adb folder. I made a reserve copy of the file and adjusted it with notepad++. These are the lines I added or enabled:
ro.hdmi.enable=true
ro.hdmi.mirror.enable=true
persist.adb.notify=0
net.tethering.noprovisioning=true
persist.debug.wfd.enable=1
persist.sys.wfd.virtual=0
Click to expand...
Click to collapse
Then I pushed it back with the adb command: "adb push build.prop /system/build.prop". Rebooted the phone, tested the mirroring option, no luck. The phone runs on android 8.1.0, has the nubia V6.0 UI and the build number is NX606J_CNCommonV2.23. Any app whatsoever with a miracast option, will redirect to the system miracast settings. The following screen will appear: https://imgur.com/a/Otf1YO0
The Struggle
I read online several forums where they claimed that setting these was helping other phones to enable miracast. For the Z18 it did not work. I tried this with the Nubia Z9 mini. Miracast did not work on there before, now it does. The build.prop seems to persist fine now. For some reason, the first few attempts (attempt 1 & 2) wiped TWRP and the adjustments on the build.prop. Third time it kept working. TWRP however, still is wiped after a few reboots, but the build.prop file remains intact with the changes I made.
The Nubia Z9 mini has a few stock apps: "screen projection", "screen projection services" and "projection sink". It loads the screen projection app and allows to chose from project/receive and works flawlessly after the build.prop changes. The Z9 mini runs on android 5.1.1 and as Nubia UI V4.0 with build number: NX511J_INCommon_V4.0.4.
I read online that:
Miracast is available on Android devices with Android 4.2 Jelly Bean
Click to expand...
Click to collapse
and
no more supported by Android since 6.0
Click to expand...
Click to collapse
Yet, I've seen people make it work, by adjusting the build.prop, for later versions also. Not seen one working with android 8.0 or 8.1. Is it impossible for some reason / a hardware thing? If it's a software issue, surely it can be overcome?
I found that the build.prop in the Z9 mini contained the following lines:
#property to enable VDS WFD solution
persist.hwc.enable_vds=1
# Add by ztemt for ZWfd begin
#property to set wfd output resolution is 1080P(0) / 720P(1) / 960*540(2) / 800*480(3)
persist.sys.wfd.zte_resolution=0
#property to show wfd sink false(0) / true(1)
persist.sys.wfd.zsink_support=1
#property this is device support wfd 1080p output support(true) not support(false)
persist.sys.wfd.1080p_support=false
# Add by ztemt for ZWfd end
Click to expand...
Click to collapse
I believe it's coupled to those apps I mentioned screen projection apps which are on the z9 mini. It had no effect adding these on the Z18. Now I'm attempting to find those apps and install them on Z18. Or looking for ways to downgrade the Z18 to android 5x. Ideally I do not want to downgrade the android. Any help, advice or questions are greatly appreciated.
rup7ur3 said:
Dear folks,
I'm trying to fix miracast on the Nubia Z18 (NX606J). I've not any experience in this and am trying to google for solutions.
I have found some answers, but it's not yet working. Hopefully I'm on the right path, but if anyone can help, it's greatly appreciated.
Why
The reason I want to use miracast, is to stream content to a portable display without the use of internet (so by cable or with WIDI). I don't think this phone supports hdmi/display port. If someone manages to get mirroring to work over cable, please let me know. As for WIDI, I think miracast is the only option? So, my bets are on this horse and I'm trying to make it run. Also, I'm new to this forum. If I post this at the wrong place, please forgive me. I created this thread for this specific model, because the manufacturer, Nubia, creates it's own (quite elaborate) UI on top of stock android. I suspect this could be part of the issue.
Summary so far
What I tried so far, is to install the custom recovery image of TWRP on my smartphone and adb + drivers on my windows 10 pc. Next I used the "mount" option in TWRP to enable adjustments of system files. The file I changed is the /system/build.prop file. I pulled the file using adb commands. Then changed the file on my pc and pushed it back to the phone. I will describe it in detail below. Yet, the sad thing is: it does not work. On another, older, model of the Nubia Z line, the Z9 mini, it did work.
Details
I installed drivers & adb/fastboot and twrp.
TWRP: https://forum.xda-developers.com/nubia-z18/development/recovery-twrp-nubia-z18nx606j-t3882098
Drivers & adb/fastboot: https://bbs.app.nubia.cn/forum.php?mod=viewthread&tid=1412934 (in chrome download didnt start for me, had to use firefox)
Once the above were installed, I connected my phone with the pc. I put phone settings in developer options to enable usb debugging. I got a notification to let my pc debug the phone, and accepted. Next I enabled "wireless display certification", "OEM unlocking" and set usb configuration to "MTP" instead of charging.
The adb on my pc was installed on my C:\adb\ folder. In the folder hold shift & right click, select open powershell or adb. I checked if my phone was connected using "adb devices". It listed my phone. So I went on and put it in fastboot mode (hold power + decrease volume). I checked if adb recognized fastboot with "fastboot devices". It listed my phone. Then next I unlocked the phone and installed TWRP with the help of this guide, from step 2 onwards: https://bbs.app.nubia.cn/forum.php?mod=viewthread&tid=1412934
Once TWRP installed. I created a backup of the phone through there. Then I selected the tab "mount" and enabled the system folder. Back to adb, I ran the command "adb devices" to see if my phone was listed, it was. Then I ran the command "adb pull /system/build.prop" that copied the build.prop file to my c:\adb folder. I made a reserve copy of the file and adjusted it with notepad++. These are the lines I added or enabled:
Then I pushed it back with the adb command: "adb push build.prop /system/build.prop". Rebooted the phone, tested the mirroring option, no luck. The phone runs on android 8.1.0, has the nubia V6.0 UI and the build number is NX606J_CNCommonV2.23. Any app whatsoever with a miracast option, will redirect to the system miracast settings. The following screen will appear: https://imgur.com/a/Otf1YO0
The Struggle
I read online several forums where they claimed that setting these was helping other phones to enable miracast. For the Z18 it did not work. I tried this with the Nubia Z9 mini. Miracast did not work on there before, now it does. The build.prop seems to persist fine now. For some reason, the first few attempts (attempt 1 & 2) wiped TWRP and the adjustments on the build.prop. Third time it kept working. TWRP however, still is wiped after a few reboots, but the build.prop file remains intact with the changes I made.
The Nubia Z9 mini has a few stock apps: "screen projection", "screen projection services" and "projection sink". It loads the screen projection app and allows to chose from project/receive and works flawlessly after the build.prop changes. The Z9 mini runs on android 5.1.1 and as Nubia UI V4.0 with build number: NX511J_INCommon_V4.0.4.
I read online that:
and
Yet, I've seen people make it work, by adjusting the build.prop, for later versions also. Not seen one working with android 8.0 or 8.1. Is it impossible for some reason / a hardware thing? If it's a software issue, surely it can be overcome?
I found that the build.prop in the Z9 mini contained the following lines:
I believe it's coupled to those apps I mentioned screen projection apps which are on the z9 mini. It had no effect adding these on the Z18. Now I'm attempting to find those apps and install them on Z18. Or looking for ways to downgrade the Z18 to android 5x. Ideally I do not want to downgrade the android. Any help, advice or questions are greatly appreciated.
Click to expand...
Click to collapse
Never try downgrading this phone. It's a nightmare because it's using AVB2.0 which was introduced with Android 8 I think. So getting that to work would be extremely difficult. What I'm not sure about is if nubia is doing anything different from other vendors as, judging by the source code, it looks the same as Sony for example (actually that's no wonder since they got 70% of their code from Sony).
What's difficult about this is that they define custom, vendor and device specific values as you can see with the Z9 build.prop. I'm not that well versed in Android actually and mostly just learning all this stuff by experimenting right now, but I would say your best bet would be some tool that scans a system for possible values in build.prop. However I'm unsure if such a tool exists unfortunately..
Sorry I can't be of more help as of now. I think Lineage is supporting Miracast though? So once I got that to work, it might be an option for you
Nubia z18 support screen cast without internet.
I use with EZcast 2.4g/5g without any internet and wifi hotspot.
I buy from Aliexpress " EZCAST 1080P TV Stick Dongle 5G Wifi Support HDMI DLNA Miracast Airplay DLNA Stick For IOS Android Windows Smartphone"
jagdishgeb said:
I use with EZcast 2.4g/5g without any internet and wifi hotspot.
I buy from Aliexpress " EZCAST 1080P TV Stick Dongle 5G Wifi Support HDMI DLNA Miracast Airplay DLNA Stick For IOS Android Windows Smartphone"
Click to expand...
Click to collapse
Thank you for the response, great to hear that it is possible! Did it work immediately?
Also, if you don't mind me asking. Could you maybe check if there are any default screen projection / sink apps pre-installed on your z18?
Mine came without any. I will try reinstall stock to see if that helps. All apps I use go to this screen: https://imgur.com/a/Otf1YO0
Online I read there are supposed to be options to enable wireless display in there. However, I think Nubia disabled it in their UI.
Related
I bought this nice minicomputer - MK812 Mini PC Dual-Core Android Camera Mic BT 4.2.1 and I relied on the fact that since there is Android 4.2 installed, I can use switching users, but unfortunately this function is disabled. I need to get it to work.
Of course, I googled. This is what I've already tried:
http://www.pocketables.com/2013/03/how-to-enable-multiple-user-mode-on-cyanogenmod-10-1-and-some-other-android-4-2-2-roms.html
The problem is that this command pm get-max-users returns Unknown command get-max-users.
Furthermore, when I enter SetProp fw.max_users 8, it has no effect, even after a reboot. The command pm usernameyouwanthere create-user is also without effect.
http://forum.xda-developers.com/showthread.php?t=2187934
App - 4.2 Multiple users feature enabler
This app can't be installed by Google Play (apparently MK812 is not a compatible device). Since I couldn't get APK anywhere to download, I downloaded the source code and compiled it and generated APK. Unfortunately, can't be installed either.
I studied the source code and found out that even if i was able to get it installed, it wouldn't have worked anyway, because this app runs similar commands (as those above) instead of the user.
https://play.google.com/store/apps/details?id=fahrbot.apps.switchme
This could be a solution even for Android 4.0 and 4.1. It works, but switching takes too long, because it requires a reboot and this switching is not integrated into the system. So I do not want it.
Do you know of any other solution or anything what I could try?
I googled again, found this - http://forum.xda-developers.com/showpost.php?p=34362377&postcount=8
But setting fw.max_users=8 in /system/build.prop haven't helped either.
Unfortunatelly they answer me, that MK812 mini pc does not support multiple user function. So I have to use SwitchMe Multiple Accounts
H0w4rd said:
Unfortunatelly they answer me, that MK812 mini pc does not support multiple user function. So I have to use SwitchMe Multiple Accounts
Click to expand...
Click to collapse
try
"setprop fw.max_users 8"
Lower-Case setprop without the quotes.
Edit: I see, can you and are you willing to get the source, modify it, build it and flash it? I'm going to have to enable it for my phone so when I figure out what needs modifying I'll let u know.
Hi guys, I have the Rock Jaw Vi phone which by all sense and purpose seems to be a clone of the HTC One. It's Quad Core with 2 mega pixel camera on the front and 8 mega pixel on the back. The case and all outward appearances are that of the HTC, the phone info screen displays the following ...
Model Number = RJViJGTL32SM
Andoid version 4.2.1
Baseband version = moly.wr8.w1248.md.wg.mp.v6.p8,2013/08/12 15:55
Kernel version 3.4.5 [email protected] #1 Mon Aug 19 16:54:14 CST 2013
Build Number = 0502H026_20130819
I can get into the boot options screen by doing the On/Volume Down press but the menu's are all in Chinese and just seem to go through self diagnostics and tests. I can drag n drop file from Mac OSx but none of the apps I have found so far will communicate with the phone via USB. I am trying to get root so i can do a full back-up and then to try and put HTC Android 4.3 on it.
Do you guys have any idea on how I can achieve this or to get the phone to display it's boot options in English ?
I am pretty much clueless and stuck, any advice, tips, hacks etc would be really appreciated
I did follow a link at one stage on the web that went to SRSroot but their tool was windows only
Hmmm More messing with the phone has revealed power on with volume up depressed gets me to some very small text menu with the options;
Boot Normal
Fastboot
Boot(UART)
Boot UART is all the test screens that I was getting in Chinese but now they are touch screen buttons and labeled in english ao that's good to know.
Using fastboot-mac from HTCRootOne tries to talk to it but comes back with error: could not clear input pipe; result -536854449, is this something that's platform specific, ie it's not a true HTC so the version of fastboot-mac is no good and needing a non specific version ?
Ok that error is generated to the oem get_identifier_token...
If i do a fastboot-mac devices i get the reply "mt6589_phone_720pv2 fastboot" ...
I'm getting there slowly
Done some more digging with the phone attached to the Mac here and checking my systems profile I see that the phone is listed under usb connections as seen in the screen grab, still referring the as a HTC. Getting a new usb cable delivered to see if the phones usb cable provided is for charging only. If anyone here has any other suggestions I would be all ears or eyes as the case might be
Done more grubbing around and have found it to be a HDC One, HTC One clone .... Now to go see if any are rooted on here
Can anyone help me
Well i am pretty much stuck here so if anyone is reading this and wants to offer some help and advice I could do with it
I have looked around on the phone and can't see any bin or system folders even with show hidden i can't find them.
adb wont give me a remote shell, it complains that there is no bin/bash
when i try and do an adb backup i get 0 byte files grrrrr!!
I still need to find a way of getting root
This phone is a tricky beast for a learner - lol
Install some file explorer that allows you to browse from the top folder (/). I'm pretty sure you'll find at least /system there.
gbl08ma said:
Install some file explorer that allows you to browse from the top folder (/). I'm pretty sure you'll find at least /system there.
Click to expand...
Click to collapse
Thanks Gbl08ma - I have have it opened in Mac osx finder with show all files hidden or otherwise - The phone shows as two "No Name" devices and get mounted immediately on connection ....
I used sideload to push a package file over using adb and then went back to use Finder, and I can't see the file anywhere - hidden partition perhaps ? Can you do that with Android ?
Even the Android SDK file transfer app wont see the phone when it's connected, I am all very confused - lol
Thanks for the reply - Wonder if i can use disk utility to so some probing and at least get an ISO image file incase I goof things real bad - lol
TpwUK
tpwuk01 said:
Thanks Gbl08ma - I have have it opened in Mac osx finder with show all files hidden or otherwise - The phone shows as two "No Name" devices and get mounted immediately on connection ....
I used sideload to push a package file over using adb and then went back to use Finder, and I can't see the file anywhere - hidden partition perhaps ? Can you do that with Android ?
Even the Android SDK file transfer app wont see the phone when it's connected, I am all very confused - lol
Thanks for the reply - Wonder if i can use disk utility to so some probing and at least get an ISO image file incase I goof things real bad - lol
TpwUK
Click to expand...
Click to collapse
/ does not get mounted over USB so you won't see /bin, /system, /data or anything other than the SD card and the internal FAT32 "user" partition when entering USB transfer mode.
You must do it on the device. And for adb to work, USB debugging must be enabled in the settings.
gbl08ma said:
/ does not get mounted over USB so you won't see /bin, /system, /data or anything other than the SD card and the internal FAT32 "user" partition when entering USB transfer mode.
You must do it on the device. And for adb to work, USB debugging must be enabled in the settings.
Click to expand...
Click to collapse
I already had the phone in usb debug mode. Had to set the phone to use usb as MTP and not mass storage device connection type. Now it allows me to get in to the blighter with adb, fastboot still errors with pipes. That method allows me to get adb shell running and i can get android file transfer .... back to the reading part again
Thanks for the information gbl08ma - if i can find a way to back-up the rom i will share it somewhere
Hmm yummy - lots of interesting things in there .... Forgive my ignorance again please, but if i can create an update.zip file from the shell on the device that compresses all files from \ and all subdirs would that be the same thing as a safe ROM backup ? i wanna be safe before i attempt to root the phone as someone on here has a lower spec version of this phone and says it's a partial brick now.
TpwUK
Rooted
This phone is easily rooted with the motochopper
http://forum.xda-developers.com/showthread.php?p=40747604
Now should I push my luck further and go for the ROM - lol
TpwUK
I believe i own the same mobile
@tpwuk01
I also asked the same here; http://forum.xda-developers.com/showthread.php?t=2180425&page=92
but i was only able to root using frama root app, and it worked like a charm, but thats the only thing i could achieve, dont know but it seems theres no official thread of developement going on for any cloned device, mine runs the MOLY.WR8.W1248.MD.WG.MP.V6.P8 2013/08/12 15:55 Baseband.
After root i just installed some root apps, ads blockers, cant get any recovery to work, (Playing safe actually not to brick this now, since no support yet) but would have appreciated trying out kitkat on it, using antutu to view up specs, its impressive, i got to find out our 13MP camera at the back can do a great job than it currently is we only need to figure out how to change the image compression, the one i stumbled upon online was the blast, the 13MP was great also the flash light was tweaked to be 50X its current brightness, our 1GB application space was increased to 3.5GB, GPS and the rest was also modded to work really great.
Would like to hear any new updates you stumble upon bro.
Still a nice and featured packed device.
Hi i have stratos with English firmware.
Is there a way to install APK directly from watch? Without usb connected to PC.
I transferred apk but i am unable to install, the installer crashes everytime.
Is there an easier way to install apk from Android mobile?
Or is there an android adb?
Thanks in advance.
Also my battery is 1 day with GPS always OFF and heartrate always ON. Is this normal?
I have the Pace not the Stratos but I don't think that you can install apps from the watch. It is possible on the Pace to use ADB to enable "unknown sources" and then attempt to install apks from the internal memory, but due to the screen size the installer does not show correctly and it is impossible to finish installing the app.
I would think that results on the Stratos would be very similar even if you found an apk that is compatible it.
I dont have screen size issues, it says installation protected and asks to press ok to install and continue (something similar) then intaller crashes.
Sounds like you got a permission issue.
Have you tried one of these?
adb shell settings put global install_non_market_apps 1
or
adb shell settings put secure install_non_market_apps 1
If you still get a similar error, then you may need root.
anox said:
Sounds like you got a permission issue.
Have you tried one of these?
adb shell settings put global install_non_market_apps 1
or
adb shell settings put secure install_non_market_apps 1
If you still get a similar error, then you may need root.
Click to expand...
Click to collapse
Ok, so after setting both settings menrioned by you i can see the install screen. And unfortunately as you mentioned i cannot see the install button
My watch has 3 buttons and none of them do the CLICK action.
Thank you for the adb commands
Is ther a shell command see all the supported settings?
firoz3321 said:
Ok, so after setting both settings menrioned by you i can see the install screen. And unfortunately as you mentioned i cannot see the install button
My watch has 3 buttons and none of them do the CLICK action.
Thank you for the adb commands
Click to expand...
Click to collapse
I know this is so late but I came across this in my journey to update watch droid assistant.
type the commands they gave you to enable unknown sources, then type adb shell wm density 150, this makes the screen show enough to hit install.
then type adb shell wm density 238 to return to the normal resolution. I know this still requires a computer to keep normal density but there is technically a way.
sonicscrewup said:
I know this is so late but I came across this in my journey to update watch droid assistant.
type the commands they gave you to enable unknown sources, then type adb shell wm density 150, this makes the screen show enough to hit install.
then type adb shell wm density 238 to return to the normal resolution. I know this still requires a computer to keep normal density but there is technically a way.
Click to expand...
Click to collapse
If we have access to PC then there are easier methods to install apk isn't it?
firoz3321 said:
If we have access to PC then there are easier methods to install apk isn't it?
Click to expand...
Click to collapse
In most cases yes, in my case no. I had updated the companion app on my phone, so my watch version was incompatible, instead of revert the phone app, I decided to force the watch to allow me to install. Changing the resolution worked like a charm.
APK installer is easier if you can get the latest apk to your computer, but i could only get it via the app pushing it to the watch.
sonicscrewup said:
In most cases yes, in my case no. I had updated the companion app on my phone, so my watch version was incompatible, instead of revert the phone app, I decided to force the watch to allow me to install. Changing the resolution worked like a charm.
APK installer is easier if you can get the latest apk to your computer, but i could only get it via the app pushing it to the watch.
Click to expand...
Click to collapse
Here is an easy way to install an app on the watch without any screen size issue:
- install the wear part of this-> https://play.google.com/store/apps/details?id=com.sssemil.advancedsettings&hl=en
When installing an apk on the watch using any file manager, just select Advanced Settings instead of the default Package Installer.
anox said:
Here is an easy way to install an app on the watch without any screen size issue:
- install the wear part of this-> https://play.google.com/store/apps/details?id=com.sssemil.advancedsettings&hl=en
When installing an apk on the watch using any file manager, just select Advanced Settings instead of the default Package Installer.
Click to expand...
Click to collapse
Works, but root on watch is required. So it's clear that people with stock firmware (or even common custom ROM with just adb root) cannot use this.
By the way, it seems that if you get adb root and add the permission to install 3rd party apps on watch then it works... I haven't tested this yet tho.
lfom said:
Works, but root on watch is required. So it's clear that people with stock firmware (or even common custom ROM with just adb root) cannot use this.
By the way, it seems that if you get adb root and add the permission to install 3rd party apps on watch then it works... I haven't tested this yet tho.
Click to expand...
Click to collapse
Apparently, sonicscrewup already has all what is required
hi,
anox suggested to install the wear part of this https://play.google.com/store/apps/d...settings&hl=en (
Advanced Settings for Watch) in order to install apk in the watch without pc
but where to find the apk intended to install on the watch (because the
"Advanced Settings for Watch" usually installs on the phone, and then transfers the wear part to the watch)?
I figured it out, probably is not the easier way to do it.
you decompile the phone apk (using apk easy tool), then you will find the wear apk inside the res/raw folder.
you can install it on the watch directly, or probably better, convert it first using this tutorial (https://forum.xda-developers.com/smartwatch/amazfit/android-wear-apps-to-android-read-apk-t3726835)
the "Advanced Settings for Watch" works well in the amazfit to install apks, and to do other things, but of course, there are many features making the app to crash.
cheers
carloscolhao said:
hi,
anox suggested to install the wear part of this https://play.google.com/store/apps/d...settings&hl=en (
Advanced Settings for Watch) in order to install apk in the watch without pc
but where to find the apk intended to install on the watch (because the
"Advanced Settings for Watch" usually installs on the phone, and then transfers the wear part to the watch)?
I figured it out, probably is not the easier way to do it.
you decompile the phone apk (using apk easy tool), then you will find the wear apk inside the res/raw folder.
you can install it on the watch directly, or probably better, convert it first using this tutorial (https://forum.xda-developers.com/smartwatch/amazfit/android-wear-apps-to-android-read-apk-t3726835)
the "Advanced Settings for Watch" works well in the amazfit to install apks, and to do other things, but of course, there are many features making the app to crash.
cheers
Click to expand...
Click to collapse
Yah, I sometimes leave something out. There are already several threads talking about how to install Android Wear app on this watch.
Anyway, an APK file is just a normal compressed ZIP file. So, the quick & easy way to install the wear part of Android Wear app is to:
- Change the file extension from "apk" to "zip"
- Extract the zip file and get the wear APK file inside the res/raw folder to install on the watch
Personally, I don't use any tool or recompile any Android Wear app in order to just install on the watch. I don't see any real world result difference.
Thanks.
I did not realise an apk could be decompressed as a simple zip. Good to know
anox said:
Sounds like you got a permission issue.
Have you tried one of these?
adb shell settings put global install_non_market_apps 1
or
adb shell settings put secure install_non_market_apps 1
If you still get a similar error, then you may need root.
Click to expand...
Click to collapse
Wanted to understand if this setting is maintained across firmware updates. I have a very poor data connection with my charger and this setting is a savior, along with File Manager+. So was wondering if I'm going to lose this at every update.
adityavaidya said:
Wanted to understand if this setting is maintained across firmware updates. I have a very poor data connection with my charger and this setting is a savior, along with File Manager+. So was wondering if I'm going to lose this at every update.
Click to expand...
Click to collapse
Just found this thread tucked away and it works perfectly. No fiddling with any poor USB connections anymore. It's by XDA user zmad2000
https://forum.xda-developers.com/smartwatch/amazfit/amazfit-pace-enable-app-list-install-t3639617
Here's the solution just to ensure that it's archived.
Background
I was have trouble getting my Amazfit Pace to be recognized by the adb program or the ADK installer. When it was in the dock it i could look at the files but not have it recognized by the other apps. I have the Amazfit Pace US version with ROM 1.3.3a
Here are the steps i took.
Enable the "developers mode" by tapping on the legal notice.
Plug in the Amazfit to the computer and put a blank file called "launcher_config.ini" in the main directory
Restart the watch. Once it has booted up connect it via the wifi to the same network your computer is on.
Open and cmd prompt and got to "C:\Users\Rich\AppData\Local\Android\sdk\platf orm-tools" directory (this will differ based on you user name)
Type adb connect (ip address of watch)
Then type adb install (whatever app you want)
Not sure if this is the 100% but it worked for me and my watch was right out of the box. Hope this helps some people.
Click to expand...
Click to collapse
Edit: What I've found is that once you enable developer mode, adb over WiFi is automatically enabled. You don't seem to need that file to be present. Only problem is that adb is now enabled over WiFi at all times when the watch is connected. So there is a security risk, albeit a small one because I'd only connect my watch to my home WiFi.
So all that's required is:
Go to Settings->About
Tap on the Serial number 7 times
Ensure the watch is connected to the same WiFi as your computer
Type adb connect (ip address of watch)
but are you able to install applications directly from the watch?
I did everything but when I try to install using "advanced settings" I always see the word "working" but the installation process never ends
apgeo said:
but are you able to install applications directly from the watch?
I did everything but when I try to install using "advanced settings" I always see the word "working" but the installation process never ends
Click to expand...
Click to collapse
It only works with root, or if you use a modded PackageManager, used in some custom ROMs, after allowing 3rd party APKs installations (non-Market security check).
sonicscrewup said:
I know this is so late but I came across this in my journey to update watch droid assistant.
type the commands they gave you to enable unknown sources, then type adb shell wm density 150, this makes the screen show enough to hit install.
then type adb shell wm density 238 to return to the normal resolution. I know this still requires a computer to keep normal density but there is technically a way.
Click to expand...
Click to collapse
Thanks a lot! That actually worked for me! :highfive:
All, I have found a solution to get this P-WAL-107-ELC-02 unlocked and usable!
Original post:
I acquired a used Outcome Health (Contextmedia) Wallboard. There have been other posts previously about unlocking the 10 and 13inch tablets, but the steps and procedures used did not work with this wallboard.
The model number is P-WAL-107-ELC-02, and is similar to the item found here: https:// fccid.io/ 2AI6X-PWALELC
It is running on Android 4.4.4
I can open the "secret" configuration menu built into the app, but all the functions are password protected. I've had no success accessing the default android settings menu either. If you close the app, it launches again immediately, and the status bar seems to be locked down so that it can't be expanded.
EDIT: I've tried using a USB keyboard, and used the settings hotkey but no luck with this either. Using the home button pushes a message at the bottom of the screen "Override Launch." I also tried generic passwords in the various menus, but nothing has worked so far.
Any suggestions or experience with these items is greatly appreciated, thank you!
Click to expand...
Click to collapse
Disclaimer:
This is a collection of the methods that worked successfully in my case. I am assuming anyone using this has an understanding of the use of ADB and shell commands. If not, please do your research to better understand the use of the command line, otherwise you may cause more damage then actual repair. Perform the actions followed at your own risk.
Rebooting into safe mode and removing contextmedia applications:
With the help of information in this thread: https://forum.xda-developers.com/android/help/android-4-4-4-context-media-10-tablet-t3670769 I got it working.
With the wallboard connected to the pc, I restarted the device and repeatedly pressed the power button until it finished booting and it started in safe mode! I was able to open the android settings, uninstall the contextmedia app and the zygote app, access dev options and enable debugging.
Connected to the PC and in debugging mode run the following to remove the synop and the remainder of the contextmedia applications.
adb reboot root //Worked in my case, confirmed root access.
adb shell
[email protected]:/ $ su //Root permissions in shell
[email protected]:/ # rm data/dalvik-cache/[email protected]@[email protected]
[email protected]:/ # rm data/dalvik-cache/[email protected]@[email protected]
[email protected]:/ # rm -r data/data/com.contextmediainc.system.synop
After that, it should let you simply uninstall or disable everything else.
With that removed, you should be able to install any compatible launcher (I used nova launcher at the time of writing this) with the adb install commands.
Flashing TWRP recovery and installing open Gapps:
I finally got a working TWRP recovery using the TWRP_2.8.7.0_RK32.img, using the method show here https://blog.matt.wf/flash-your-recovery-image-via-adb-shell-on-android/
Generic RK32 with SDcard - http://www.freak-tab.de/abdul_pt/TWRP/Generic/TWRP_2.8.7.0_RK32_SDcard.img
Generic RK32 with Unified Storage - http://www.freak-tab.de/abdul_pt/TWRP/Generic/TWRP_2.8.7.0_RK32_DATAMEDIA.img
Turns out the manufacture is Rockchip and the series is an rk3288.
Flash your recovery image via adb shell on android
JANUARY 16, 2017
//edit: You need a rooted device for this kind of flashing
Hi, ever wondered about how you can flash a recovery.img via adb shell?
A lot of posts suggest flashing it via fastboot. Well my ****ty Samsung phone is not detected by fastboot. Then there is the option to install a dubious binary file which is called flash_image.. thank u internet!
Well damn I have the recover.img whats so hard to use dd and flash it with a single shell command? For those who don't know much about linux commands here we go;
Enable your USB debugging bridge in switch via adb to the terminal:
./adb shell
Then you should be able to find your recovery partion with:
DEV=$(ls /dev/block/platform/*/by-name/recovery); echo $DEV
that should output something like this:
/dev/block/platform/7824900.sdhci/by-name/recovery
If this is the case you only have to put the recovery.img on your sd-card or the internal storage and you are one command from flashing:
dd of=$DEV if=/external_sd/recovery.img
Thats it! No binaries you have to install. No ****ty fastboot udev rules :S
You can enter into your new recovery system with:
./adb reboot recovery
Click to expand...
Click to collapse
With that, I could flash the gapps from the recovery and now the play store and services are working seamlessly. With the exception of the home and recent buttons not doing anything, this one is completely usable now.
Install SuperSu if you want to maintain permanent root on the device!
Download links:
Generic RK32 with SDcard - http://www.freak-tab.de/abdul_pt/TWRP/Generic/TWRP_2.8.7.0_RK32_SDcard.img
Generic RK32 with Unified Storage - http://www.freak-tab.de/abdul_pt/TWRP/Generic/TWRP_2.8.7.0_RK32_DATAMEDIA.img
Nova Launcher - https://nova-launcher.en.uptodown.com/android
SuperSu - https://supersu.en.uptodown.com/android
Recovery Reboot - https://apkpure.com/recovery-reboot/gt.recovery.reboot
Droid Hardware Info - https://droid-info.en.uptodown.com/android
Open Gapps - Platform: ARM Android: 4.4 Variant:Nano - https://opengapps.org/
No suggestions, but what a cool find. I'm surprised that hospitals use Android smart TVs! Or is it a giant tablet?
Sent from my LM-V350ULM using Tapatalk
jwrezz said:
No suggestions, but what a cool find. I'm surprised that hospitals use Android smart TVs! Or is it a giant tablet?
Sent from my LM-V350ULM using Tapatalk
Click to expand...
Click to collapse
It seems more like a giant tablet. I saved it from the dumpster hoping it could be turned into a nice web surfing machine for the garage.
slaysher62 said:
It seems more like a giant tablet. I saved it from the dumpster hoping it could be turned into a nice web surfing machine for the garage.
Click to expand...
Click to collapse
That would be awesome.
Sent from my LM-V350ULM using Tapatalk
bump
How often do I click the power button when it is booting, to get into safe mode? It just keeps going back to the home screen for me. Also, which USB did you have connected to the PC while doing this?
I am having the same issue
Any further update or progress on this from anyone? This would be perfect for a garage (or wherever) media center.
Any idea where I can find the recovery file? I tried to obtain one via TWRP and no luck.
I was able to install nova laucher and delete the files in data using adb shell. I'm just stuck at the recovery image part.
---------- Post added at 01:11 AM ---------- Previous post was at 12:20 AM ----------
Freak-tab .de website is down. Can someone please send me the image recovery file? Thanks in advance.
slaysher62 said:
bump
Click to expand...
Click to collapse
I'm able to get mine to the Recovery System but I cant run adb shell as I get exec '/system/bin/sh' which is no root. But I can't get into Safe Mode. I have the 32" Wallboard too but mine is ELC-01. What power button combo did you use to get into Safe Mode?
Plug in power and then just mash the power button? When do you stop mashing it?
Mash it as you plug in power and keep mashing?
Plug in power as you hold the power button down?
Stop mashing when it flickers or the screen is white?
Can’t get in to the settings.
ttiimmmmyy said:
How often do I click the power button when it is booting, to get into safe mode? It just keeps going back to the home screen for me. Also, which USB did you have connected to the PC while doing this?
Click to expand...
Click to collapse
Can’t get into settings. Tried the power button variations, with and without mini usb plugged in to the pc.
Wallboard
There are some typos in the original post commands. I wasn't having any luck with the "rm" commands to remove "zygote" and "sysop" apps, so I used the "ls" and "cd" commands to see what the file names were.
Removing the second file should be "[email protected]:/ # rm data/dalvik-cache/[email protected]@[email protected]" , the third should be "[email protected]:/ # rm -r data/data/com.contextmediainc.system.sysop"
When you type the command "DEV=$(ls /dev/block/platform/*/by-name/recovery); echo $DEV" you'll get an output, type that output into the next command. ex: dd of="output of previous command".
If you just drop the TWRP onto the USB mass storage drive that appears when you connect the tablet, it will be in "/sdcard" folder. The final command will be something like: dd of="output of previous command" if=/sdcard/RK32.img. If you don't have root access it will tell you "permission denied", so make sure you use the command "su" after "adb shell".
Lastly, I accidentally found that when I performed a factory reset via TWRP recovery menu that the Home button started working. It may also work via the settings menu, but I didn't try it that way.
Anyway, hats off to OP for posting this as it gives use to these massive android tablets.
The secret password is cat10dog
Kinda stuck...
Hey Slaysher62. I'm kinda stuck. Was wondering if you could help me out. I have a few of these due to our hospital just not needing them anymore and telling me I could either keep them or throw them away. I've tried for weeks to replicate your success but I feel like I'm missing a few steps. If you could Message me or something that'd be great.
Thanks,
Pinball Wizard
slaysher62 said:
All, I have found a solution to get this P-WAL-107-ELC-02 unlocked and usable!
Original post:
Disclaimer:
This is a collection of the methods that worked successfully in my case. I am assuming anyone using this has an understanding of the use of ADB and shell commands. If not, please do your research to better understand the use of the command line, otherwise you may cause more damage then actual repair. Perform the actions followed at your own risk.
Rebooting into safe mode and removing contextmedia applications:
With the help of information in this thread: https://forum.xda-developers.com/android/help/android-4-4-4-context-media-10-tablet-t3670769 I got it working.
With the wallboard connected to the pc, I restarted the device and repeatedly pressed the power button until it finished booting and it started in safe mode! I was able to open the android settings, uninstall the contextmedia app and the zygote app, access dev options and enable debugging.
Connected to the PC and in debugging mode run the following to remove the synop and the remainder of the contextmedia applications.
adb reboot root //Worked in my case, confirmed root access.
adb shell
[email protected]:/ $ su //Root permissions in shell
[email protected]:/ # rm data/dalvik-cache/[email protected]@[email protected]
[email protected]:/ # rm data/dalvik-cache/[email protected]@[email protected]
[email protected]:/ # rm -r data/data/com.contextmediainc.system.synop
After that, it should let you simply uninstall or disable everything else.
With that removed, you should be able to install any compatible launcher (I used nova launcher at the time of writing this) with the adb install commands.
Flashing TWRP recovery and installing open Gapps:
I finally got a working TWRP recovery using the TWRP_2.8.7.0_RK32.img, using the method show here https://blog.matt.wf/flash-your-recovery-image-via-adb-shell-on-android/
Generic RK32 with SDcard - http://www.freak-tab.de/abdul_pt/TWRP/Generic/TWRP_2.8.7.0_RK32_SDcard.img
Generic RK32 with Unified Storage - http://www.freak-tab.de/abdul_pt/TWRP/Generic/TWRP_2.8.7.0_RK32_DATAMEDIA.img
Turns out the manufacture is Rockchip and the series is an rk3288.
With that, I could flash the gapps from the recovery and now the play store and services are working seamlessly. With the exception of the home and recent buttons not doing anything, this one is completely usable now.
Install SuperSu if you want to maintain permanent root on the device!
Download links:
Generic RK32 with SDcard - http://www.freak-tab.de/abdul_pt/TWRP/Generic/TWRP_2.8.7.0_RK32_SDcard.img
Generic RK32 with Unified Storage - http://www.freak-tab.de/abdul_pt/TWRP/Generic/TWRP_2.8.7.0_RK32_DATAMEDIA.img
Nova Launcher - https://nova-launcher.en.uptodown.com/android
SuperSu - https://supersu.en.uptodown.com/android
Recovery Reboot - https://apkpure.com/recovery-reboot/gt.recovery.reboot
Droid Hardware Info - https://droid-info.en.uptodown.com/android
Open Gapps - Platform: ARM Android: 4.4 Variant:Nano - https://opengapps.org/
Click to expand...
Click to collapse
Help with recovery
Recently acquired 3 of these 32-inch screens at first I wasn't able to get into safe mode but I deleted everything off the sd card and restarted the screen after that spamming the power button worked and I was able to get the app uninstalled and Nova launcher installed but what I'm having an issue with is getting TWRP to install also I noticed mine isn't a RK3288 its a RK3188
I've tried to flash all the TWRP RK3188 recoveries I could find but none of them work just puts the screen into a boot loop until removing power and restarting
any update from android 4.4
was anyone able to get any operating system installed on this besides andriod4.4? trying to decide if I am going to just use the screen and install a new mini board to install android 10 or chrome os
---------- Post added at 07:41 PM ---------- Previous post was at 07:36 PM ----------
to get to the secret menu . power on "tablet", wait till the program is running . you will see a logo close to the bottom right hand corner. keep pressing it until the menu pops up. to get into the actual settings I can't remember what it was called but I should be something like device admin or such on the right hand sign. click it. it will ask for password ( cat10dog ) from there you should be able to follow the instructions above
Uit232b-u03
Thought I'd chime in; I have one of these wallboards, model # UIT232B-U03, nominally equipped with an RK3188. Here's what I've found:
Misc. Device Info
RIL Ver: KitKat ril-rk29-dataonly v3.3.00
Build No.: Z05-outform-32-B4.21-20160324
Build Fingerprint: rockchip/rk3188/rk3188:4.4.4/KTU8Q/eng.root.20151208.162319.eng/test-keys
Board / Chipset: rk30sdk / RK30board
As you might notice from the Build Fingerprint, this model appears to be running an engineering build of Outcome/ContextMedia's KitKat ROM; this screen was pulled from a working clinic, but USB debugging was already enabled and connecting via adb shell automatically dumps you into a root shell. There's nothing more you need to do to gain that access.
The device info (courtesy of Droid Info) references three different RK chips in a few places: RIL Ver. (rk29); board & chipset (rk30); and everywhere else (rk3188, specifically). I don't know what to make of that. Maybe something to do with it being an engineer build? Could be an engineering sample board, too -- I need to check for that info.
Personalization
As mentioned, it looks like this unit (and maybe other UIT2xx-xxx revisions) appears to come pre-rooted with USB debugging already enabled. There's no need to authorize any given machine on the tablet when connecting over ADB for the first time, either. If you still want/need to access the system settings, three-finger-tap on the application logo in the bottom-right of the screen (tapping multiple times will just cause a credits list to pop up). The password to leave the application for the Android system settings is cat10dog, as has been noted elsewhere.
Before I loaded anything new, I went ahead and factory reset it to see what it looked like. Upon doing so, the only system application was Zygote -- it looks like it's a modified version which is serving as the "launcher" for this tablet, and which forcibly reloads the application whenever it is closed for whatever reason. From factory reset, it will launch into a first-time setup screen, where it looks like you can configure the application and get connected to wifi/ethernet and download the remaining system apps (this is my impression; I didn't go through with it, but I imagine the application will want to verify a license or something). Uninstalling the modified Zygote seems to not kill the first-time setup screen (makes sense -- it's meant to stay resident and likely has everything it needs loaded into RAM at the time), but you can install Nova Launcher 5.3 (last version to support KitKat 4.4.4) and then Zygote fully disappears and you won't get bothered about setup anymore. (I have no idea what happens if you remove Zygote and then don't install a launcher. You can probably still connect over ADB, but I've never seen a launcher-less Android.) Other apps can be installed at this time, too.
As noted elsewhere, the Home and Recents soft buttons still do not work. I'm not 100% sure, but I think that's something stuffed in the ROM itself and may not be configurable (maybe through the commandline?). But, you can just use the Back button to go back to the home page at any point.
I have not had any success installing TWRP: It turns out, despite the chip being labeled in all ways as an RK3188, it is in fact a lower-specced RK3188T (1.4Ghz top speed). Every version of TWRP for the RK3188 I've tried has resulted either in a bootloop (unplug from power and plug back in to return to system), or a black screen, or the TWRP splash screen but which never progresses beyond that step. (This reminds me, I need to check on the black screen instances to see if the recovery executable is running at all, and what happens when I try to manually start it.)
On the off-chance anyone has a TWRP build for the RK3188T for me to try, I'd definitely appreciate it! Or indeed any ARMv7-based build, if I'm just going to be blindly loading recoveries to see what happens. (If anyone has any advice for debugging the recovery loading process, I'm rather a noob at this and could use any information about where to look for logging info, or to make it output a log at all if it doesn't by default.)
OH, and uh... if anyone has a stock version of the recovery partition, could you send it to me? I didn't back it up before writing over it...
Other than not getting to install TWRP and get all experimental with ROMs, it is usable in its current state as an old-but-servicable, pre-rooted-for-your-convenience-no-supersu-required, massive Android tablet. Too bad Pocket Camp requires Android 5 since a few builds ago...
Edits for grammar, spelling, extra info.
theugly_bear said:
was anyone able to get any operating system installed on this besides andriod4.4? trying to decide if I am going to just use the screen and install a new mini board to install android 10 or chrome os
---------- Post added at 07:41 PM ---------- Previous post was at 07:36 PM ----------
to get to the secret menu . power on "tablet", wait till the program is running . you will see a logo close to the bottom right hand corner. keep pressing it until the menu pops up. to get into the actual settings I can't remember what it was called but I should be something like device admin or such on the right hand sign. click it. it will ask for password ( cat10dog ) from there you should be able to follow the instructions above
Click to expand...
Click to collapse
device configuration and also just to clarify what he meant was tap on that flower looking logo repeatedly until you get the secret device configuration then on top right corner theres 3 lines select network settings and it should ask for a password which is cat10dog
And now I'm stuck
If anyone could give me direction/etc to get past where I'm at, I'd appreciate it.
I bought one of these bad boys from an auction and thankfully found this post and started the task of customizing it. I got to the point to where I deleted the apps listed, all through adb reboot recovery (used Generic RK32 with SDcard).
However, on reboot, it didn't go into recovery and had the Context Health splash to a nature backdrop and an Error: Wallboard not installed message. USB debug wasn't persistent, and trying everything that worked previously, I can't seem to get into Safe Mode, and I haven't found any other ways to get into Settings.
I did find the "reset" hole on back, which otherwise functions as a hardware 'Volume Up', but have yet to find any [Boot to Recover] methods involving only Volume Up and Power that work.
Any ideas of things to try?
Thank you
Update 1: Still no luck overall, but somewhat of progress, I hope: Plugging in the DC automatically boots up everything. If I hold down the hardware volume up/reset while adding power AND have USB plugged in, I get a listing in Device Manager; however, the screen stays black. Otherwise, as far as getting my PC to notice it, this is the only means to do it. There is no connection when powered on normally, rather I plug in USB before or after providing power. Also, spamming the power button while booting in order to get into Safe Mode had worked initially. Now doing it causing a freeze on the second or third splash screen refresh.
So I have recently acquired a bunch (50+) of these 32" screens. They were pre-rooted as @dwkindig had mentioned. I was able to remove all of the Context media apps and unlock the functionality as a basic android tablet pretty quickly. Threw Nova launcher on it and they work great. Has anyone had success in getting anything above Android 4.4 on these? I have a ton and can pull any files that would be of help to do some digging here, so please let me know. I would love to at least get Lollipop on these so that Android Webview could be upgraded and I could use the Wallpanel app for dashboard use on these. Any suggestions or help I can offer?
None of this is my work and all recognition goes to the awesome developers that made this possible, I will link their guides in here with some minor notes for newbies like me that may had some issues trying to unlock and root the Fire Stick (FS) 4K
DISCLAIMER: BE WARNED THAT YOU HAVE TO OPEN YOUR FIRE STICK AND IT WILL VOID YOUR WARRANTY, THIS IS NOT FOR THE FAINT OF HEART AND NEITHER THE DEVELOPERS OR MYSELF ARE RESPONSIBLE IF YOU BRICK YOUR DEVICE OR VOID YOUR WARRANTY
Ok, now let's begin:
UPDATE: Per Sus_i, this makes perfect sense:
"Since the exploit can't be patched, it's in my opinion the best to do the setup at the beginning, pair the remote, then update to the latest over fireOS. That way you avoid a pending update nag setup screen after doing the exploit. Then enable ADB and unknown sources. After kamakiri I would flash only magisk.zip + sideload the manager app with adb... and avoid any prerooted rom flashing until there is an update to a somewhat higher version (and the current 6.2.6.8v1 has that contact manufacturer error screen)."
First very important, I wish I would have known this before but make sure you have a Laptop and a Monitor to Connect the FS to, so basically the USB Power cable from the FS connect it to your laptop and connect the HDMI portion to a monitor or TV
I also strongly recommend to have your FS deregistered before continuing as this will prevent your FS from automatically updating after rooting
In order to unlock the bootloader follow "THIS GUIDE"
I made a quick video on how to open your device and how to Short it using Aluminum Foil:
https://www.youtube.com/watch?v=h4I6ifBLWJ4
Process is pretty self explanitory, make a USB ISO from the image provided on that thread, boot into it and open terminal, make sure you put the file he provides on a RW location, my mistake was that I put it inside a RO folder and it would not load the script, so I mounted the kamakiri-mantis-v1.2.zip unto the /mnt directory of the usb and I was able to run the script successfully, make sure to run the commands quickly as the first time that I it finished the ./bootrom-step.sh script and I left it sitting for 10 minutes to grab a bite, I couldn't run the second script and had to start all over. After the second ./fastboot-step.sh script, your device will be on the TWRP recovery, now on the same terminal page or a new one enter these commands:
Code:
adb devices
adb shell
exit
You should see your device's serial number from the first command with "device" to the right of it and the second command will basically put you inside the device's directory assuming you have established a successful connection. The last command just put you back to your starting point, now open the firefox browser on the FireOS USB and navigate to the URL below
Download the Pre-Rooted Image from "HERE" This image contains Magisk already so you don't have to worry about installing it separately, the image is larger than the available partition on this USB so this is a good time to either get a second USB or if you want to download the file to your local hdd and pull them from there its up to you, then run these commands:
Code:
adb push <your download location you decided earlier here>/mantis-6.2.6.8-rooted_r1.zip / sdcard/
adb reboot recovery
adb shell
twrp install /sdcard/mantis-6.2.6.8-rooted_r1.zip
twrp wipe cache
twrp wipe dalvik
reboot -p
This basically installs the pre-rooted image to your device, after the last command, you should see on your monitor the Fire Stick Reboot and boot to the Amazon GUI Splash Screen, now very important if you followed my previous instructions of deregistering your device before performing all these steps, it should bring you up to the Amazon Initial Setup Screen, now what you want to do is do the following commands before continuing on terminal:
Code:
adb devices *you should see something your screen where the FS is connected to, click accept or enter can't remember*
Now it should show you in terminal your serial number and "device" next to it, meaning you can run adb commands in which you will run the following to disable OTA updates:
Code:
adb shell
su *after this command you should see something again on your screen, click the check the box "Always Remember" and click ok" *
if "su" was successful, you should see something like this:
mantis:/ $ su
mantis:/ # *the hash means you're running as root, if you don't have a "#" you are not running as root"
Than continue with these commands and should get the following results:
pm disable com.amazon.tv.forcedotaupdater.v2
***Package com.amazon.tv.forcedotaupdater.v2 new state: disabled***
pm disable com.amazon.device.software.ota
***Package om.amazon.device.software.ota new state: disabled***
pm disable com.amazon.device.software.ota.override
***Package com.amazon.device.software.ota.override new state: disabled***
After running all these commands exit adb and continue with the normal Amazon Setup including adding your amazon account. After you get to the screen where you can see all the apps, open a new web page browser in firefox and download "This Add-On" , this one is less than 200MB so it should fit on the Fire OS USB, so I would download it and copy it to /mnt for ease of access, go back to terminal and type this:
Code:
adb devices
adb push <your download location you decided earlier here>/AFTV-MM-1.7-6.2.6.8.zip/ sdcard/
adb reboot recovery *it will boot into TWRP*
adb shell
twrp install /sdcard/AFTV-MM-1.7-6.2.6.8.zip
twrp wipe cache
twrp wipe dalvik
reboot -p
Your device will reboot and if everything went smoothly, you should have a rooted amazon fire stick 4k, Congrats :good:
Nice guide
Here are a few thoughts from me...
It's important to use the latest kamakiri. The mentioned prerooted 6.2.6.5 is probably a downgrade. A few sticks needs an update of the TZ in order to play prime video. The TZ update is only in the v1.2 Kamakiri or in the 6.2.6.6 prerooted.
Edit: S̵i̵n̵c̵e̵ ̵t̵h̵e̵ ̵e̵x̵p̵l̵o̵i̵t̵ ̵c̵a̵n̵'̵t̵ ̵b̵e̵ ̵p̵a̵t̵c̵h̵e̵d̵,̵ ̵i̵t̵'̵s̵ ̵i̵n̵ ̵m̵y̵ ̵o̵p̵i̵n̵i̵o̵n̵ ̵t̵h̵e̵ ̵b̵e̵s̵t̵ ̵t̵o̵ ̵d̵o̵ ̵t̵h̵e̵ ̵s̵e̵t̵u̵p̵ ̵a̵t̵ ̵t̵h̵e̵ ̵b̵e̵g̵i̵n̵n̵i̵n̵g̵,̵ ̵p̵a̵i̵r̵ ̵t̵h̵e̵ ̵r̵e̵m̵o̵t̵e̵,̵ ̵t̵h̵e̵n̵ ̵u̵p̵d̵a̵t̵e̵ ̵t̵o̵ ̵t̵h̵e̵ ̵l̵a̵t̵e̵s̵t̵ ̵o̵v̵e̵r̵ ̵f̵i̵r̵e̵O̵S̵.̵ ̵T̵h̵a̵t̵ ̵w̵a̵y̵ ̵y̵o̵u̵ ̵a̵v̵o̵i̵d̵ ̵a̵ ̵p̵e̵n̵d̵i̵n̵g̵ ̵u̵p̵d̵a̵t̵e̵ ̵n̵a̵g̵ ̵s̵e̵t̵u̵p̵ ̵s̵c̵r̵e̵e̵n̵ ̵a̵f̵t̵e̵r̵ ̵d̵o̵i̵n̵g̵ ̵t̵h̵e̵ ̵e̵x̵p̵l̵o̵i̵t̵.̵ ̵T̵h̵e̵n̵ ̵e̵n̵a̵b̵l̵e̵ ̵A̵D̵B̵ ̵a̵n̵d̵ ̵u̵n̵k̵n̵o̵w̵n̵ ̵s̵o̵u̵r̵c̵e̵s̵.̵ ̵ After kamakiri I would flash only magisk.zip + sideload the manager app with adb... and avoid any prerooted rom flashing until there is an update to a somewhat higher version (and the current 6.2.6.8v1 has that contact manufacturer error screen).
Edit: Update: meanwhile, the fix for the mentioned 'contact manufacturer' error is known...
Take a look here and here.
Edit/Update: Due to efuses (blocking the bootrom access), it isn't recommended to do any update infront of the unlock...
Sus_i said:
Nice guide
Here are a few thoughts from me...
It's important to use the latest kamakiri. The mentioned prerooted 6.2.6.5 is probably a downgrade. A few sticks needs an update of the TZ in order to play prime video. The TZ update is only in the v1.2 Kamakiri or in the 6.2.6.6 prerooted.
Since the exploit can't be patched, it's in my opinion the best to do the setup at the beginning, pair the remote, then update to the latest over fireOS. That way you avoid a pending update nag setup screen after doing the exploit. Then enable ADB and unknown sources. After kamakiri I would flash only magisk.zip + sideload the manager app with adb... and avoid any prerooted rom flashing until there is an update to a somewhat higher version (and the current 6.2.6.8v1 has that contact manufacturer error screen).
Click to expand...
Click to collapse
Ops Typo let me edit it, I meant to put 6.2.6.8 on the command lol, and aaaa I see I didn't know the exploit couldn't be patched great info, so than yes I will revise my instructions thank so much
UPDATE: I just checked my FS and I'm on 6.2.6.8v1 and didn't receive contact the manufacturer, is it because I sideloaded the manager app after?
nandroidint said:
UPDATE: I just checked my FS and I'm on 6.2.6.8v1 and didn't receive contact the manufacturer, is it because I sideloaded the manager app after?
Click to expand...
Click to collapse
No. If I remember correct, it has something to do with flashing, i.e. the vendor partition wasn't flashed propperly.
Maybe you flashed not the prerooted!? With the Kamakiri TWRP version is flashing full ota update packages (renamed to zip) also possible... and in the prerooted thread is such a full 6.2.6.8 ota linked.
Edit: Could be that this error is prime video related, idk. rbox said he looks into it soon...
Just for clarification: The prerooted rom is a perfect thing since years.
My suggestion 'avoid any rom flashing' from my last post is just an attempt to keep it simple for beginners.
By the way, if the stick gets all updates in front of the unlock, it makes no sense to update it after the unlock again (unless addon.d support is needed).
I hope that has become clear I very much appreciate all the prerooted stuff
thanx for the tut nandroidint this is exactly what I needed, I wasn't sure how to do the shorting so the video helped out a lot now I'm ready to do this. But I'm sorta a noob when it comes to android so I got few questions tho, 1) what are the main benefits in rooting the fIrestick 4K 2) are there different roms to install? 3) are there root only .apks? 4)also one main thing I would like to be able to do is spoofing the Mac address any idea if that's possible?
5)Oh and lastly what OTB cable do you recommend? sorry for all the questions ?
'std::bad_alloc'
After running the adb push of the manthis.zip Im getting terminate called after throwing an instance of 'std::bad_alloc'.... What Im I doing wrong?
i gave root can i remove amazon services
i dont want google launcher jsut remove services
Sooo there’s no way to expand the storage? Even after rooted? Just bought an otg cable ?
Can I please get some support guys ? previous questions I don’t need answered I found someone on twitter who explained a few things but can someone please answer this.
Hello, after root i got massage on screen
: android system
There is na internal problem with Your device. Contact Your manufacturer for detalis.
And when im trying to register in Amazon it bringing me back to pairing screen, farest i can go it is wifi connection.
Did i brick my Stick?
davinci2798 said:
Hello, after root i got massage on screen
: android system
There is na internal problem with Your device. Contact Your manufacturer for detalis.
And when im trying to register in Amazon it bringing me back to pairing screen, farest i can go it is wifi connection.
Did i brick my Stick?
Click to expand...
Click to collapse
Did you deregister before rooting like the tut says? This is why I’ve been hesitant on rooting because of the lack of support on this forum
Yep, it was new Stick, out from box. Not registered at all. I managed massage, but still comminng to pairing screen.
itsyaboy said:
Sooo there’s no way to expand the storage? Even after rooted? Just bought an otg cable
Can I please get some support guys previous questions I don’t need answered I found someone on twitter who explained a few things but can someone please answer this.
Click to expand...
Click to collapse
You can use adoptable storage on 4K stick with Add-Ons installed and activated AFTV-XM Xposed Module. It brings adoptable storage support to Settings UI.
tsynik said:
You can use adoptable storage on 4K stick with Add-Ons installed and activated AFTV-XM Xposed Module. It brings adoptable storage support to Settings UI.
Click to expand...
Click to collapse
Nice! That’s awesome thanx for the info and reply.
davinci2798 said:
Yep, it was new Stick, out from box. Not registered at all. I managed massage, but still comminng to pairing screen.
Click to expand...
Click to collapse
Hey so have you figured out what was the problem yet? If so could u explain how you managed to fix it? I’m going to root sometime this week and would hate to run into this issue.
USB drive for storage
itsyaboy said:
Sooo there’s no way to expand the storage? Even after rooted? Just bought an otg cable
Can I please get some support guys previous questions I don’t need answered I found someone on twitter who explained a few things but can someone please answer this.
Click to expand...
Click to collapse
Yes, You can use a USB drive for App loading and Movie storage.
See Troypoint.com for good video.
I suggest a single USB OTG Cable and a USB HUB for your drive.
Then you can add a Keyboard and Mouse which make it MUCH easier to type commands.
Good Luck
How might one do this on a Mac?
Thanks
gogorman said:
How might one do this on a Mac?
Thanks
Click to expand...
Click to collapse
Do what? The only thing u can do on the MacOS is to create the bootable iso usb, you can follow these steps to do so https://www.google.com/amp/s/www.le...-on-an-apple-mac-os-x-from-an-iso?hs_amp=true
After your create the bootable usb just reboot and hold down option and select the bootable usb, once in open up Firefox and download the kamakiri-mantis-v1 and open a terminal window and change the directory to where u have the kamakiri folder, in terminal type cd then just drop in the kamakiri and hit enter. From there u can just follow the tut, FYI the bootable usb you create is a Linux OS so that’s how you can do it on a Mac, you just can’t do the rooting on MacOS, just clarifying Incase that was your question.
Sorry I haven't rooted phones in a while and am trying to root my fire stick 4k. Can we get some pictures tutorial pretty please
Sent from my ONEPLUS A5010 using Tapatalk
Step by step instructions would be great?
chinkster said:
Sorry I haven't rooted phones in a while and am trying to root my fire stick 4k. Can we get some pictures tutorial pretty please
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
I would love that too, I have rooted with Unix before but that was on a Drone(Solo).
I understand about creating a bootable USB drive and booting my PC/Mac by changing the bios to boot first off the USB as step 1.
Step 2 is loading software onto the USB while booted under Unix/Linux???
Step 3 How do you then connect to the firestick?
When do you plug the firestick into the tv and when do you short out the jumper??
I know to some of you these sound very basic but it would be helpful for those of us just learning this environment.
Thanks in advance...
RPM99 said:
I would love that too, I have rooted with Unix before but that was on a Drone(Solo).
I understand about creating a bootable USB drive and booting my PC/Mac by changing the bios to boot first off the USB as step 1.
Step 2 is loading software onto the USB while booted under Unix/Linux???
Step 3 How do you then connect to the firestick?
When do you plug the firestick into the tv and when do you short out the jumper??
I know to some of you these sound very basic but it would be helpful for those of us just learning this environment.
Thanks in advance...
Click to expand...
Click to collapse
The link he provided explains all that https://forum.xda-developers.com/fire-tv/orig-development/unlock-fire-tv-stick-4k-mantis-t3978459 all except for when to connect to the tv, but I assume it’s after running the kamakiri script, btw it’s not software, you just download the kamakiri mantis while in the Linux usb os, open a terminal and change the directory of the terminal to the kamakiri folder in order to run the ./bootrom-step.sh and ./fastboot-step.sh commands
Edit: just follow the main guide from the link above then read this guide after, that’s the best way to understand it.