Sorry, just now i posted into wrong section.
I am searching for a decent Z5C for my personal project.
have anyone manage to make Z5C to autoboot when charging
i manage to do it on my old S4 but unfortunately that S4 got issues with disconnecting with phone line.
Related
EDIT: Never mind, tested it on other phones and it works fine. Apparently my phone's hardware has broken Bluetooth. Great. Might just switch phones because of that.
Okay. So, I took the plunge and bought the Sony Smartwatch 2. It's a nifty device, and I've had my eyes on it for a while. But here's my problem - It'll stay connected via Bluetooth, but it won't sync information. I've already asked around on those forums - Those guys aren't much help. The thing is, I think my phone's Bluetooth is faulty or malfunctional. It doesn't work with my MOGA controller either.
I am sincerely asking, is there any way to fix this?
And yes, I know this isn't the right forum - But I'd be drowned out by everyone over there asking about Security Errors because they didn't read.
Thanks in advance. I'm flashing Kuma's ROM again (Currently on V21D from Wind) and factory resetting, going to see if that'll fix it.
hello. i'm sorry this question may sound like a total noob question and i am not worthy, but humbly ask for some help.
i currently have a rooted Nexus 5 on stock 4.4.3 and appradio3...trying to get them to mirrorlink with each other via ARUnchained. Based on 3 months of trying to find the correct solution, i'm still not able to make ANY sort of connection between the two. I have the USB extension from the dongle and HDMI cable from the back of AppRadio3 connected to a slimport that I connect to my Nexus 5. I believe I've made the correct connections, but nothing happens on the head unit. It doesn't even try to make a connection....everything is still grayed out (the APP icon and Pandora)
Before, I've tried using the "Start Diagnostic" feature on ARLiberator to which all the marks were green. When I start connection, it immediately disconnects.
I'm starting to believe something is not correct on the hardware part, but I'd really appreciate ANY sort of guidance.
Thanks!
I'm trying to restore a Nexus 9 (flounder, WiFi) to stock Nougat from CM 13.0-20160924-NIGHTLY-flounder. Problem is, my PC won't detect the device.
I have another Nexus 9, which is running Nougat 7.1.1 and it is neatly detected by the PC as Nexus 9.
I've looked through the developer options and made sure the settings are the same on both devices. I've flipped through the various connection types while connected (charging, media, photo).
I'd appreciate some help unf#cking this situation.
Crike said:
I'm trying to restore a Nexus 9 (flounder, WiFi) to stock Nougat from CM 13.0-20160924-NIGHTLY-flounder. Problem is, my PC won't detect the device.
I have another Nexus 9, which is running Nougat 7.1.1 and it is neatly detected by the PC as Nexus 9.
I've looked through the developer options and made sure the settings are the same on both devices. I've flipped through the various connection types while connected (charging, media, photo).
I'd appreciate some help unf#cking this situation.
Click to expand...
Click to collapse
I saw someone else with that same problem. Turned out to be the USB port. If it turns out to be that, it's an easy repair. Just change the USB daughter board. Couple screws and couple ribbon cables. Takes like 20 minutes, and they're like $12 on eBay.
Explore software solutions first of course. Maybe uninstall and reinstall drivers. Or even try wugs toolkit.
Thanks for the suggestion. Indeed, I read a similar thread with the same solution. A USB board should be on its way from China in the next few days. I was considering buying one anyway as the charging performance has been erratic at best for a while, which might be due to the same basic trouble with the hardware.
I'll update when the replacement board is in and installed in a couple of weeks.
Crike said:
Thanks for the suggestion. Indeed, I read a similar thread with the same solution. A USB board should be on its way from China in the next few days. I was considering buying one anyway as the charging performance has been erratic at best for a while, which might be due to the same basic trouble with the hardware.
I'll update when the replacement board is in and installed in a couple of weeks.
Click to expand...
Click to collapse
I changed mine too (also from China). Mine was affecting otg connection. Fixed it right up, took about 20 minutes. I'm no pro either, only other hardware repair I've done is the screen on my n7 (2013).
Replacing the USB board fixed the problem.
Crike said:
Replacing the USB board fixed the problem.
Click to expand...
Click to collapse
Good to hear
Anyone got this working? My car doesn't pick the phone up at all, old xperia 1 first gen no problems. Nice to know whether I'm wasting my time before I start looking into it further.
Nick.
Working fine for me...first time as well
I came from a mark I and had a similar issue. You have to essentially setup Android auto in the vehicle for the new phone. It only links to one device at a time.
Aloha Everyone!
My S9+ screen has broken yet I can tell it's still functioning as my alarms keep going off etc and when I plug into my PC it registers the phone and should be authorized on this pc.
However since I can't use the screen I can't change the debug settings or put it into "file transfer mode".
I see Dr Fone, Droidkit, Phone Rescue etc. but they all seem suspect and suspiciously all want 35$. I don't mind paying if they work however they all seem to require I put it into debugging which once again I can't do with my broken screen.
Is there any open source solution to this? I would like the pictures on the internal SD of course but I need a recording I made with voice record for a meeting I have tonight. This is my priority and I am currently at work and don't have the time to scour forums and all the regular things I would do.
Any help is appreciated! I don't think this post is breaking any rules and if it is I'm sorry. The S9+ mention is specific but only because I need to explain the generation of the phone as it's older.
I know this is an old phone and I pray someone sees this, infinite mahalos for any suggestions or replies in advance!
You Rock!
Is your screen responsive to touch (Even if you can’t see what you are touching)?
I saw you said broken, do you mean physically? Can you see anything on the screen?
Could you use scrcpy?
It has a few small cracks that water got into and fried the screen I believe.
My alarms going off at the proper times, if I touch the buttons it will vibrate in the ways it should etc.
It doesn't seem to be responding to touch however and it is black as in off, no color or light.
I am looking into scrcpy! Thanks, if anyone has any other suggestions that would be much appreciated!
Spcry won't work because I am not in debug mode, or rather never authorized it while I had it unlike all my previous phones. I got bored of homebrew apps and didn't bother doing it on this one.
Not sure there is anything you can do. No PC programs can control, no Bluetooth mice, no nothing.
Damn, you would think there would be a program at this point to bypass everything and grab your files.
Thanks for your help everyone!
If there was, I would be patched right away, and whoever reported it would get thousands of dollars for the report.
im pretty sure you can use a usb c hub with hdmi and usb to plug in a mouse and your phone to a tv
This is late, but questions do NOT belong in the Development section. Also, this post is for a S9+, not an S9.
Thread moved to S9+ Questions and Answers.