I have flashed with odin my samsung and now the phone doesn't turn on, the computer recognized it and is trying to install the processor driver but it fail and says "no driver found" on Windows update.
Can't enter in recovery and download mode
Related
Hello..
I have a Galaxy S plus (GT I9001), I installed TIGER-JELLY BEAN v8 recently, which was working fine. But phone was lagging a lot so I decided to install the stock rom again. I installed Kies(latest version) with drivers and connected my phone to my PC, but it was not detected by Odin. Every time I got Samsung Composite USB Device driver installation failed. So I searched and installed drivers from Here and Here. But they didn't worked either. I tried again after changing USB Cable but still no luck. Then I installed Kies in my Laptop and tried to connect the phone. Still it wasn't recognized.
Things were not working with downloading mode and Stock rom tar file cannot be flashed with recovery mode. So I searched a converter for .tar to flash able .zip file and found THIS . I installed this tool and tried to convert the tar file to zip. Didn't noticed that it require knowing "Mount Point", so I converted the tar file to zip without changing the mount point and copied the file to internal storage of phone and flashed the zip file. After that phone restarted , and stuck at Samsung Logo.
New I can't even to recovery Mode, nothing happens when I keep Pressing Vol Up + Power. Phone starts and stuck at samsung logo. Odin was already not detecting the phone so I tried connecting the phone on Ramdump Mode and some how drivers were installed and odin detected it correctly. But odin can't flash phone in ramdump mode so it didn't worked.
So now the problems I am facing are:
1- Phone is stuck at samsung logo, can't go in recovery mode.
2- Odin not detecting phone in downloading mode.
Is there something what I can do to fix this?
Please help!
Thank you.
Suddenly my phone went into bootloop and couldn't access recovery. So I tried to flash firmware with odin, toward the end of the flash odin failed as the USB cable was unfortunately disrupted. Now the only thing I can get out of the phone is download mode, and a screen that says firmware ugrade encountered an issue, Please select recovery mode in Kies & try again. Now the problem with this is now odin nor Kies will recognize my phone like there are no drivers. My pc says unrecognized device connected.
Please help me to unbrick my S2 GT-19100. I REALLY NEED THIS BACK TO LIFE.
Hi,
If you haven't done so already, please follow this guide: http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
If your phone is still not detected after following the guide, it is likely that your phone is bricked.
gsstudios
Suddenly one day my S6 edge G925I got stuck on "An error has occured while updating the device software. Use Emergency recovery function in the Smart Switch PC Software"
So i tried using the Emergency Recovery function, which threw an error after downloading "Could not recognise update mode". I cannot enter recovery mode. Only Downloading mode.
I tried Flashing it with the stock firmware but it said "There is no PIT partition".
So i gave it the correct PIT file but it gets stuck at "Get PIT for mapping".
Tried Odin 3.07 and 3.12. Used it in XP Compatible mode too and ran as admin.
Tried 3 different usb cables now.
Tried flashing a custom recovery mode(twrp) but that failed giving the same error.
Please help
nikhalster said:
Suddenly one day my S6 edge G925I got stuck on "An error has occured while updating the device software. Use Emergency recovery function in the Smart Switch PC Software"
So i tried using the Emergency Recovery function, which threw an error after downloading "Could not recognise update mode". I cannot enter recovery mode. Only Downloading mode.
I tried Flashing it with the stock firmware but it said "There is no PIT partition".
So i gave it the correct PIT file but it gets stuck at "Get PIT for mapping".
Tried Odin 3.07 and 3.12. Used it in XP Compatible mode too and ran as admin.
Tried 3 different usb cables now.
Tried flashing a custom recovery mode(twrp) but that failed giving the same error.
Please help
Click to expand...
Click to collapse
Try changing USB port or use the rear ports, or take battery out and in and reboot to download mode, it's a common issue, happens a lot, if you're using a USB hub, then don't, and plug the phone directly to the USB port.
MigoMujahid said:
Try changing USB port or use the rear ports, or take battery out and in and reboot to download mode, it's a common issue, happens a lot, if you're using a USB hub, then don't, and plug the phone directly to the USB port.
Click to expand...
Click to collapse
So I'm using a laptop and tried all the USB ports. As the S6 edge battery is non removable i cannot do that. Also the phone doesnt charge (no kernel?), only when the phone is connected the emergency page shows up.
Hello, my friend wanted Android 5.0 on his device (Samsung Core 2). He installed it from the SD card and got an error saying: "Application Installer has stopped working". And there is an option Okay. If I press it it just gives me the same error and behind the error message is only a black screen. He can't use his phone at all. He doesn't know much about android phones, computers and technology in general. He asked me if I could fix it. Now I know that I have to install a stock ROM (4.2.2) on the device. I downloaded ODIN and the Stock firmware for the device. Extracted both ODIN and Stock Firmware. Now the problem is when I try plugging the device in my PC. My PC doesn't recognize the device. So I downloaded Samsung USB drivers from "developer. samsung. com/galaxy/others/android-usb-driver-for-windows" . I installed them restarted my PC and I still get the error message. If I put my phone to download mode it won't even start recognizing the device. If I turn off my device and plug it in (starts charging the device) and I get an message that the drivers are being installed and then it says Drivers failed to install device failed to connect. Is there anyway I can make my device recognizable. I can't flash stock ROM because I don't have an SD card reader. Is there any method that I could use or just something I could do to install stock ROM and get this device to work.
Thank you in advance.
Hi! i have problem with the default system installation by odin. The computer detects the phone and also. I have installed the drivers but during installation odin stands still :/ where i can find solutions..