My Lenovo a6000 showing Qualcom Hsusb Digonalistic 9006 ..when I put it on pc..and popped up couple of partisans (drive I: DRIVE :G ..
ETC)...help please.....i flashed pixel experience 9.0 then...it rebooting suddenly and then bricked......hlep
I get the answer. ....so gyz which users are fall into this situation please don't panic....your mobile does not dead every thing is OK. ....Just do things what I am saying carefully. ..
1. GO AND DOWNLOAD THIS ZIP FILE FROM THIS LINK.....(https://www.androidbrick.com/downlo...or-xiaomi-oneplus-one-oppo-lenovo-zte-nubia/)
2. ZIP PASSWORD -android1ick23*.TR
3. Run the program and load your stock firmware file ....(extract your stock firmware zip and select the file named "farmware"the name of the file can also be other so at that case select that file which contain system files)
3. Attach your mobile via usb....AND flash it...
4. Done ????
Related
Hello,
To install to clockwork recovery manually I replaced the recovery.img file but when i restarted my phone it says:
Image signature verify fail
Your boot/recovery image may have an incorrect signature.
Please update your image to a signature official one
you can remove battery for power down.
now i can access only to pink screen, but when i connect my phone with a usb cable then computer only checks drivers etc but does not open a drive where i could change recovery.img back to normal.
maybe some drivers are missing..
also made video of it: https://www.dropbox.com/s/48ogtdy7momwout/VIDEO0007.mp4
anyone? Help me please
i can get to firmware update but it always fails
Solution to ur problem
Had the same problem.. but solved it by following these:
Insert microSD card into ur pc via card reader,etc.
Download the file B919_official.7z. from (kaefert.is-a-geek.org/huawei_honor/B919_official.7z)
Extract the contents of the archive to the root of the microSD card.
Create a new folder named “dload” (without the quotes)
Within the “dload” folder, copy 2 files named “UPDATE.APP” and “UPDATE_CUST.APP” (without the quotes) from the extracted content of B919_official.7z.
Insert the microSD card into the Huawei U8860. Do not power on the Huawei Honor U8860.
While the Huawei Honor U8860 is powered off, press and hold Vol Up + Vol Down + Power. Release the buttons when it starts flashing.
The Huawei Honor U8860 should power on and reflect flashing 1/2, followed by 2/2.
Wait for it to complete.
There u got the mobile back good as new.
Note: ur data that is not memory card will be deleted.
thanks it worked. had the same problem and solved
thanks it worked. had the same problem and solved.
U8860 inage signature verify fail
Have the same problem and would appreciate any help extended
Mine is that accidentally renamed the image file without the extension ".img" thus android does not recognize it.
i had disabled usb debugging and am thus unable to connect my phone via usb to change the name.
my phone was rooted though
i am able to reach the pink screen but any effort to flash in a new ROM fails
i had not installed CMW and was running ics.
Please help.
is there any way to enable usb debugging when phone is off and cant start?
rohanadvani007 said:
Had the same problem.. but solved it by following these:
Insert microSD card into ur pc via card reader,etc.
Download the file B919_official.7z. from (kaefert.is-a-geek.org/huawei_honor/B919_official.7z)
Extract the contents of the archive to the root of the microSD card.
Create a new folder named “dload” (without the quotes)
Within the “dload” folder, copy 2 files named “UPDATE.APP” and “UPDATE_CUST.APP” (without the quotes) from the extracted content of B919_official.7z.
Insert the microSD card into the Huawei U8860. Do not power on the Huawei Honor U8860.
While the Huawei Honor U8860 is powered off, press and hold Vol Up + Vol Down + Power. Release the buttons when it starts flashing.
The Huawei Honor U8860 should power on and reflect flashing 1/2, followed by 2/2.
Wait for it to complete.
There u got the mobile back good as new.
Note: ur data that is not memory card will be deleted.
Click to expand...
Click to collapse
error while step 2/2
update failed..
what can i do to fix that?
vuralemre said:
error while step 2/2
update failed..
what can i do to fix that?
Click to expand...
Click to collapse
Update. ..
Hi, after try to replace the recovery.img and i've got the same problem.
when i try to restore the stock rom i got a error "Update failed" at step 2/2.
i try with the violet screen but the drive don't mount.
I try 4 time and have the update failed at step 2/2 systematicaly.
Can somebody help please.
Broken Link
Hi, this file link broken "B919_official.7z" please share new link.
Killerdog said:
Hi, after try to replace the recovery.img and i've got the same problem.
when i try to restore the stock rom i got a error "Update failed" at step 2/2.
i try with the violet screen but the drive don't mount.
I try 4 time and have the update failed at step 2/2 systematicaly.
Can somebody help please.
Click to expand...
Click to collapse
You'll have to use this downgrade patch first, before you can install the stock ROM.
http://forum.xda-developers.com/showthread.php?p=33000395&highlight=b930+downgrade#post33000395
1) erase all data on usb card
2) extract downloaded file and move the folder dload to the card
3) volume up, down and power to install update
4) erase the card again
5) now move the dload folder with the stock ROM to the card
4) volume up, down and power to install update
5) after the installation the phone reboots several times
6) done
good luck :good:
Had the same problem but SOLVED
sc0rpp said:
Hello,
To install to clockwork recovery manually I replaced the recovery.img file but when i restarted my phone it says:
Image signature verify fail
Your boot/recovery image may have an incorrect signature.
Please update your image to a signature official one
you can remove battery for power down.
now i can access only to pink screen, but when i connect my phone with a usb cable then computer only checks drivers etc but does not open a drive where i could change recovery.img back to normal.
maybe some drivers are missing..
also made video of it:
I used the b935 ics rom and put it into my sdcard.
Then i use the three button trick and flashed it.
done!
Click to expand...
Click to collapse
Hi to all! My tablet is bricked I can open the recovery menu, but, even if i can use "adb sideload" command from my pc, i don't have a rom to send to my tablet. How can i solve the problem? The tablet can boot but it remains in the "initial configuration page", because a system process always crashes".... Please help me
If you can get into recovery and other things your not bricked, junior member. I don't know the exact process but if someone with an a1000 knew or was willing and instructed they could dump the rom and if someone knew how could make it into a flashable zip, maybe, like I said don't know the exact process
mypd1991 said:
If you can get into recovery and other things your not bricked, junior member. I don't know the exact process but if someone with an a1000 knew or was willing and instructed they could dump the rom and if someone knew how could make it into a flashable zip, maybe, like I said don't know the exact process
Click to expand...
Click to collapse
can anyone give me stock firmware of lenovo a1000g?
nick84tl said:
Hi to all! My tablet is bricked I can open the recovery menu, but, even if i can use "adb sideload" command from my pc, i don't have a rom to send to my tablet. How can i solve the problem? The tablet can boot but it remains in the "initial configuration page", because a system process always crashes".... Please help me
Click to expand...
Click to collapse
there is a post post in lenovo forum PREAMBLE-FOR-LENOVO-A1000-ROM-RECOVERY-ETC
u can a nandroid backup there ,after installing twrp ,just restore back up backup
place the back up u need to create a folder "TWRP"
in twrp "BACKUPS"
in backups "LENOVO_A1000_MT8317"
PUT THE RESTORE FILES IN A FOLDER CREATE THE "RESTORE FOLDER" IN ABOVE LENOVO FOLDER
Hope This helps
Caution MAKE SURE TO BACKUP YOUR IMEI AND MAC ADRESS AND BLUETOOTH ADRESS
Note : Step 6 and 7 can be shortcutted by Pressing on the hard reset button while/while not connected to PC
: this will erase all data on your internal memory, so keep all the data you wanna back up in PC or External SD card and remove it (just to be safe)
ok, so
Step 1 google A1000F_A412_01_23_130822_ROW_USER, you should find it in 4shared(dot)eu
Or http://www.4-shared.eu/download/bt6fqlKPInMXDN3q7CPuW1/A1000F-A412-01-23-130822-ROW-USER.html
Step 2: once you finish downloading, extract it, then go to the FlashTool folder and look for FlashTool.exe
Step 3, once you open FlashTool.exe, Click the checkbox DA DL All with Checksum
Step 4 Now load scatter file MT6577_Android_scatter_emmc (located in A1000F_A412_01_23_130822_ROW_USER Folder, it will be the only file show other than the flash tool folder)
Step 5 now click Format> Format All partition except Bootloader > validation > ok
Step 6 Now connect your USB to MiniUSB (charger cord) to the computer but DO NOT PLUG IT YET TO THE PC
Step 7 now hold down on your Up volume button and wait 10 sec. then plug it into pc
Step 7.1 (not really) the loading bar on the bottom of SP flash tool should turn red and other difirent colors, once its finished, there should be a popup saying OK, Close it and youre done
Step 8: now Click on download, after you download, look at Step 6 to 7.1
Step 9 IF the device fails to boot, download this ( will put link to A1000F fix tool)
Step 10 press the hard reset button (besides SD card slot) or Follow Step 6 to 7.1
Step 11 Boot UP
To install TWRP 2.5 ( Found it in lenovo russian forums) (Tested the file) (worked for my IdeaTab A1000-F)
Step 12 Download From This (Direct Link) http://lenovo-forums.ru/Files/OS/Tablets/A1000/Custom/A1000T_TWRP_v2.5.0.0.zip
Step 13 Extract it
Step 14 IGNORE the included scatter file from the TWRP download (had problems with it) and follow Step 4
Step 15 On the loaded files from Scatter file, look for recovery ( 7th File), Click on it, there should be a file explorer pop up
Step 16 On the file explorer pop up, look for the A1000F_TWRP_v2.5.0.0 folder you just extracted AND then click on the recovery.img found inside
Step 17 Now Choose Firmmware -> Upgrade and do Step 10
TO ROOT WITHOUT PC (must do step 1-17)
Step 18 Boot to recovery (hold power button + up volume button AT THESAME TIME)
Step 19 You should be at TWRP recovery, Tap on Reboot>System and there should display a warning about the system not being rooted, and it should prompt you to slide to root, SLIDE IT, it should reboot automatically
Step 20 in your app drawer, look for SU installer and click on it,Your going to be prompted to innstall SU via playstore or via TWRP (i did it via TWRP bacause im lazy, and the system apps are updating, but your free to do otherwise) it should reboot, and vioala, your rooted
To Update Firmware
Step 21 Open SuperSU>settings>scroll down>enable pro (SuperSU should restart) then Open SuperSU again>settings>survival mode
Step 22 Download This (download 1) (will update to put link) and this https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Step 23 Open the Rashr Flasher tool you just downloaded from playstore and find Download 1 then navigate Download 1 file location (Named Recovery Folder) > Stock and tap on the recovery img
Step 24 download and install the Update from Settings>about tablet>Firmware Update (make sure you have enabled survival mode in super Su, or else you will loose root privilages)
To go back to TWRP
Step 25 just use the Rashr Recovery tool and go to download 1 file location (named Recovery Folder) > TWRP and tap on the recovery img
ＨＥＬＰ！
I tried the flash tool thing ,and the red line under did popes out, about ten seconds later it popes out a message, and says that ＂ｆｌａｓｈ ｔｏｏｌ ｅｒｒｏｒ＂，＂Ｓ＿ＤＡ＿ＤＲＡＭ＿ＮＯT_SUPPORT"(3004)
What can I do?
Please help me!
P.S.my ideatab a1000f was hard bricked ,it can not go to my twrp recovery mode that i had before it bricked.:crying::crying::crying:
Hello
here i am posting here because i cant post on Miscellaneous Android Development , how ever i think i post there before while working on B5512
I Just got new G700 it came with B115 middle east channel , phone is good but as a start is there is a update i must ask my self is root ready , and CWM for sure so i start the digging
@chamaruco thank you for your great thread which saved and helped many people
now i got a file and i think you were looking for it ""G700-U10_V100R001C00B124CUSTC432D001_Firmware_Portugal_Channel-Others_4.2.1_EMUI 1.8_05021LMW.zip"" it contain usb upgrade and sd upgrade with drv and flash tool
i notice EMUI 1.8 not 1.6 which i saw for example a permission manager with it on P6 is that here in that rom too ?
is that rom improved than mine b115 phone is good for first look but
(in B115)
1-camera quality is strange i dont mean bad but it look very strange it is like very poor on quality
2-in call volume is too low in my opinion all " in test mode"
Question now did any one get that update "EMUI 1.8 B124" can tell is there is any improvements ?!
Question am i able to flash CWM image directly with flash tool to save some annoying procedures ?!
a member here provide flasher and cwm.img and orginal recovery.img
i did not work with the phone yet need to shift data from old phone remove ext2 part and prepare for change , and feeling lost here
want to strike it all once
i will upload "EMUI 1.8 B124" soon as it came from a private server
any suggestions are welcome
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
how to install this firmware i.e. B124 on G700-10
chamaruco said:
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Click to expand...
Click to collapse
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
talvigi said:
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
Click to expand...
Click to collapse
Dload inside put update.app file, restart in updatemode
chamaruco said:
Dload inside put update.app file, restart in updatemode
Click to expand...
Click to collapse
But my mobile does not boot into CWM recovery mode as i have seen in my previous Qmobile A8 it always restarts in the defualt recovery mode which only give options to "1. reboot, 2. update from SDcard, 3. update from cashe, 4. wipe/delete user data and wipe/delete cache and in the last there is a calibarate TP, AND OFF COURSE THESE ALL ARE THE ANDROID BUILTIN RECOVERY STEPS NOT OF THE CWM
And off course there is not any file or folder named update.app in the downloaded .zip/extracted file. "as i have mentioned above the folder contains a folder named META-INF and three img files named as boot cust and system while a .bin file named logo too.
THANKS FOR YOUR TIME AND HELP.
foffa said:
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
Click to expand...
Click to collapse
So after I select the Reworked scatter file there is only the sec_ro partition checked to flash. So after flashing it do I now select the previous scatter file and then flash everything (including preloader)?
hello everyone ..... i will share the root trick without ubl (unlock bootloader)
this method only applies to root magisk only.
this trick I have tested with mobile phone huawei y5 2017 with android version 6.0
and xiaomi redmi note 3 mtk ..
what you prepare as follows:
1.Firmware same with your phone type (my recommendation is flash FW on your phone)
2.Boot.img from the appropriate firmware of your phone type
3.magisk manager
execution steps:
1. make sure the phone is connected internet
2. open the phone settings to activate usb debugging and install the source check from the outside in the security settings.
3. copy boot.img into sdcard on phone
4. install magisk manager application and open the application,
go to the settings on the top left and search "booted boot output format and you can choose according to your needs (if select img.tar, this works with Odin samsung). make your choice (if img = flash with fastboot or spflashtool, ufibox.
go back and select pairs and you will see 3 options "download zip, patch boot img file, install "
please select "patch img boot file" select file and search boot.img stored in sdcard and ok ... magisk manager will download automatically ... just wait until there is installation process is complete.
after finished you see its results in the internal memory in the folder "magisk manager"
there is a file named "patched_boot.img" that means success
copy patched_boot.img to laptop / pc and rename it to "boot.img" and flash it with the appropriate tool of your phone.
if boot.tar in flash with odin
if boot.img flash with spflashtool (if your chipset is mtk)
just install patched_boot.img your phone is rooted
thanks to @topjohnwu
I am sorry, my English is not good
*remember that all the risks in modification are at risk and I am not responsible for all your failures .....
thanks for visiting and hopefully to suc ...
Does this work with Sony Xperia X Performance (Android oreo) that has ubl no?
Hello everyone
I hope somebody can help me. I have a Huawei y6 scc-u21 that I need to fix. I have downloaded a firmware flash file to reflash the phone however, after doing so, I found that the gapps are not installed. I tried to download and install every update but still I did not have gapps installed.
Also, I noticed that after flashing and everytime I do a factory reset, the phone would not prompt me to a setup process and just automatically goes to the normal interface. Some settings are missing too.
Please help. Without GAPPS this phone is basically useless. Doesn't even get a signal even though a SIM card is inserted.
Thanks.
I had the same problem.. here is what i do to solve it:
1- download u21 cm2 backup file from here:
http://www.mobilekse.com/2018/09/huawei-y6-scc-u2131-all-file-firmware.html?m=1
2. Extract it with 7zip.
3 download an sd card update "update.app".
4. install the update with sd card.
5- extract the file with "huawei update extractor" and get "BOOT.img" , "ABOOT.img" and "CUST.img" rename them to lowercase and put them to the folder of the first firmware of step 1/
6- open qfil, select flat buit, select the programmer path from the firmware folder then select from the top: tools then partition manager.
7- select boot.img partition and with a right click select manage partition.
8- choose the boot.img extracted and replaced.
9- do the same for aboot.img and cust.img
10- the phone will exit this dump mode and you will find playstore, keyboard, notfications..
Ask me if you found anything not clear