Audio mods? - LG V30 Questions & Answers

Does anybody know some good audio mods? For Magisk, xposed, or twrp in general?

Tech180 said:
Does anybody know some good audio mods? For Magisk, xposed, or twrp in general?
Click to expand...
Click to collapse
For aosp use 24bit mod

Tech180 said:
Does anybody know some good audio mods? For Magisk, xposed, or twrp in general?
Click to expand...
Click to collapse
Look down in the Mods Section. I recommend Anxious Magisk mod if you have North America variant on stock rooted firmware.
--|Enables|--
All Lockscreen Weather Animations, Anxious Kernel Script, DTS:X 3D Surround (US998 20g+, VS996 20i+), Dual Speakers for North American Variants, EmojiOne 4.5 w/ Water Gun, G7 Camera Features (Updated Camera App, Google Lens, Super Bright Mode, Updated AI & Filter Data), Google Phone (Stable), G7 Equalizer Settings, Google Sans, High Impedance Mode for Everything, Pie/Pixel Roboto & Various Other Fonts, Pixel WiFi Mod, Sunshower as Default Alarm, The big adventure as Default Ringtone, US GPS Config, YouTube Vanced (Black);
Click to expand...
Click to collapse
Of you don't have North American variant, you can still install the DTS 3D Stereo surround sound yourself on most rooted stock firmware (if you have LG firmware with necessary libs). Plus the DTS equalizer

I have a set of flc8s. Subjectively speaking, I've pretty much hit listening nirvana in my price range on portable audio equipment while using flac files.
My audio settings are:
- DTS:X Surround mod (for some electronic tracks. I usually prefer it off for most types of music)
- 24 bit - High impedance - Dual speaker mod output
- LG equilizer (is nice to have, but I never use it).
- Neutron Player with these settings:
Under the "Audio Hardware" menu, select "Generic Driver" ON,. (which also has a sub-menu: Generic Driver -> Hi-Res Codec = ON, Generic Driver -> Hi-Res Speaker = ON), "Direct USB Driver", "DSD over PCM (DoP)" and "Follow Source Frequency" options. Note that the "Direct USB Driver" option is just for USB output. Using the latest update under Oreo (Android 8), these settings don't need to change.
A great tip from*@james444*- by default the V30 only has a brightness slider in the pull-down notification shade, but you can configure it to add a volume slider too, by pulling that shade all the way down, selecting "Edit", tapping the top-right hamburger menu, and toggling on "Volume". This is useful, because Neutron doesn't (yet) give you access to the fine-grained volume control when the quad DAC is active. By configuring the shade to have a volume slider, you don't need to leave the Neutron app in order to recover that fine-grained volume control.
p. s. I've also enabled volume control in the notification area. It allows you fine volume control while in apps.
Link
p. p. s. If this phone ever breaks I'll be compelled to buy another one it sounds so good.
US998 -> VS99620i

I use ainur sauron + audio modification library + viper4android xhifi. Available as magisk modules.
Sent from my LG-US998 using Tapatalk

Related

[Q] Z2 Sound enhacement in all apps

As the title says, is there any way to route the other apps to use the sound enhacements? For example poweramp has a Music Fx feature, when activated, it uses the system's sound enhacements but youtube and other apps such as browsers have a low quality sound.
I use existenz premium lp.
I used to have existenz kk which had improved sound in all apps.
Simple. Should you be rooted and have recovery, flash any desired sound mod. If you are not rooted and have recovery, there is not much you can do...
I think you don't understand my problem. I already have two mods that give me exactly what I want but the sound effects are only available in Sony apps such as Walkman video album, and poweramp because it can be forced to use the system's sound.
kanej2006 said:
Simple. Should you be rooted and have recovery, flash any desired sound mod. If you are not rooted and have recovery, there is not much you can do...
Click to expand...
Click to collapse
mihailgreceanu said:
I think you don't understand my problem. I already have two mods that give me exactly what I want but the sound effects are only available in Sony apps such as Walkman video album, and poweramp because it can be forced to use the system's sound.
Click to expand...
Click to collapse
The sound mod that I flashed increased ALL volume. Games, videos, music, youtube, etc...
kanej2006 said:
The sound mod that I flashed increased ALL volume. Games, videos, music, youtube, etc...
Click to expand...
Click to collapse
Bro you really don't get it. Of course the mod gives a more powerful volume, I'm not complaining about volume, I'm taking about quality here. The sound effects do not apply to other apps. I'm a perfectionist and I feel even a tiny difference and believe me it's far from the best it can do (YouTube sound vs power amp/Walkman etc).
mihailgreceanu said:
Bro you really don't get it. Of course the mod gives a more powerful volume, I'm not complaining about volume, I'm taking about quality here. The sound effects do not apply to other apps. I'm a perfectionist and I feel even a tiny difference and believe me it's far from the best it can do (YouTube sound vs power amp/Walkman etc).
Click to expand...
Click to collapse
I understand now, lol. You want high QUALITY audio?
Well, on lollipop I am using Project PXBA™ 2.0:
http://forum.xda-developers.com/crossdevice-dev/sony/sound-mod-z2-z3-5-1-1-project-pxba-t3197101
Ps. You must be on Lollipop 5.1.1 in order for the sound mod to work correctly.
This mod is one of the best, if not the best possible mod should you want the best quality sound.
Here is what you get with the mod:
*Z5 Premuim latest build's Audio System
*Beats Audio
*htc boom sound effects with harman kardon
*Sony icx1237 scripts
*Improved ALSA with many plugins and custom configs
*Improved audio resolution
*Maxx , SRS & DTS to increase Bass & Clarity
*Stereo Speaker MOD (for Call)
*Enabled AudioPreProcessing features (auto noise suppressor & gain)
*Improved built in speaker and headphone's gain/volume
*More Dynamic Range with wider soundstage
*Best Asound (28224kHz 64bit) (Thanks Project Desire)
*Forcing 24-64 playback
*Highly boosted - X-Loud , Clear Audio+ , FM-Radio , Clearphase
*More 2x Power (lossless) effects than older version
*Work with Viper4Android
kanej2006 said:
I understand now, lol. You want high QUALITY audio?
Well, on lollipop I am using Project PXBA™ 2.0:
http://forum.xda-developers.com/crossdevice-dev/sony/sound-mod-z2-z3-5-1-1-project-pxba-t3197101
Ps. You must be on Lollipop 5.1.1 in order for the sound mod to work correctly.
This mod is one of the best, if not the best possible mod should you want the best quality sound.
Here is what you get with the mod:
*Z5 Premuim latest build's Audio System
*Beats Audio
*htc boom sound effects with harman kardon
*Sony icx1237 scripts
*Improved ALSA with many plugins and custom configs
*Improved audio resolution
*Maxx , SRS & DTS to increase Bass & Clarity
*Stereo Speaker MOD (for Call)
*Enabled AudioPreProcessing features (auto noise suppressor & gain)
*Improved built in speaker and headphone's gain/volume
*More Dynamic Range with wider soundstage
*Best Asound (28224kHz 64bit) (Thanks Project Desire)
*Forcing 24-64 playback
*Highly boosted - X-Loud , Clear Audio+ , FM-Radio , Clearphase
*More 2x Power (lossless) effects than older version
*Work with Viper4Android
Click to expand...
Click to collapse
Do you suffer any negative effects using this sound mod like poor call quality? Cheers!
Sent from my D6503 using XDA-Developers mobile app
RuffBuster said:
Do you suffer any negative effects using this sound mod like poor call quality? Cheers!
Sent from my D6503 using XDA-Developers mobile app
Click to expand...
Click to collapse
Not at all. Just far higher quality and far louder. Best of all you get dual speakers ringing when you get phone calls/sms messages and also dual speakers when using loudspeaker in a phone call!
mihailgreceanu said:
As the title says, is there any way to route the other apps to use the sound enhacements? For example poweramp has a Music Fx feature, when activated, it uses the system's sound enhacements but youtube and other apps such as browsers have a low quality sound.
I use existenz premium lp.
I used to have existenz kk which had improved sound in all apps.
Click to expand...
Click to collapse
I think you mean the equalizer setting.
As far I know, the global equalizer affecting all apps by default was removed by Google in Lollipop and instead the apps need to have option inside to enable its own equalizer or the system equalizer.
Sent from my D6503 using Tapatalk
mihailgreceanu said:
I think you don't understand my problem. I already have two mods that give me exactly what I want but the sound effects are only available in Sony apps such as Walkman video album, and poweramp because it can be forced to use the system's sound.
Click to expand...
Click to collapse
You may try my guide on how to make Viper4android to work with tunein (just go into my threads).
Tunein always didn't support any audio mods, but following my guide changes that.
Sent from my Redmi Note 3 using XDA-Developers mobile app
mr.loverlover said:
You may try my guide on how to make Viper4android to work with tunein (just go into my threads).
Tunein always didn't support any audio mods, but following my guide changes that.
Sent from my Redmi Note 3 using XDA-Developers mobile app
Click to expand...
Click to collapse
who uses tunein? not me obviously and i didn t say anything about tunein
Somebody uses it and I just gave you some idea how to make musicfx to work with every audio player. But since you're not interested in trying it then why do you ask for help?
mihailgreceanu said:
who uses tunein?[emoji14]not me obviously and i didn t say anything about tunein
Click to expand...
Click to collapse
Sent from my Redmi Note 3 using XDA-Developers mobile app

|kenzo/kate|audio mod|30-04-19|shox Audio Mod v4|reborn

Hello!
Unleash the audio quality of your Redmi Note 3!
This is a sound mod especially designed for the Redmi Note 3 Pro (kenzo /kate) and its Qualcomm Snapdragon 650 chipset.
It also offers option for enhancing audio via speaker,
It is a hardware level modification that enables the disabled CLS_H_HIFI DAC mode of our chipset that enhances the sound.
The aim of this mod is to offer the ability to take full advantage of the IIR filter implementation offered by Qualcomm audio codecs (WCD93xx). The IIR filters are implemented in hardware as a cascade of five biquads that can be designed independently.
FEATURES :
It enhances the soundstage and just ensures a clean audio to be put-out by the hardware. It increases the dynamic range of bass and treble the device can handle.
It enables HiFi or high performance audio on your smartphone without any hissing sound.
The filters are implemented in hardware and independent of the ROM, kernel, and media playback software used.
It is fully compatible with other audio mods like Ainur audio, ARISE sound, ExtremeBeats, and also Viper, James DSP
The additional impact on battery usage is virtually non-existent
Options for enhancing speaker audio:
HTC 10, which uses the earpiece as a secondary speaker
Stereo, which uses the earpiece as the second speaker to provide true stereo sound from speakers.
INSTALLATION :
1. Download the latest release of shox audio from the drive link attached to the second post.
2. Flash zip in TWRP recovery.
3. Follow the onscreen instructions and select the appropriate options.
4. Feel the shox effect!
Note : You have to reflash the mod after every ROM or kernel update
DOWNLOADS:
Download the latest version of shox audio below:
https://drive.google.com/folderview?id=0B5ratNhH-7mGU3AtTVFmekE4VG8
PS:Tested and working on a kenzo/kate smartphone on all roms.
This mod just enhances the soundstage and just ensures a clean audio to be put-out by the hardware. It increases the dynamic range of bass and treble the device can handle.(heavy equalizer and viper4android users definitely know what I'm talking about)
Link to official viper4android website:
https://vipersaudio.com/blog/
The zip file you download is not a recovery flashable one. It contains the Viper4Android apk. So extract the zip and install the apk.. Please dont complain about it.
Recommended tips:
1)I recommend AGNi kernel by @psndna88, Darkness kernel by @MOVZX or Guyver kernel by @MEGAX91 because it has slimbus overclock which enhances audio quality and my mod on his kernel gives the best audio experience. I have also included patched kernels of other devs also if you need them too..
2)Flash Ainur Sauron audio mod made by @UltraM8 along with this mod for a much better experience.This is currently the best audio mod which is the cleanest..Please thank him for his great work...
Link here: https://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516
3)Users who need more tweaking to the audio can use Viper4Android.
4)I have included some of the best IRS samples for viper4android(according to me). So try it out if you are using viper4android for complete control over your music. Extract the zip and place the contents in viper4android/kernel directory of your internal storage.(the zip provided is not recovery flashable).
5)People who use MX player for videos can enable SW audio boost which will further increase the sound levels through speakers without any distortions..
It is recommended not to listen through speakers at full volume for longer periods.. Keep the volume low by 1 or 2 steps from the max.
6)People who think that the present max volume through headphones isn't enough can install viper4android and increase output gain to 6dB in master gate..
My personal Viper4Android settings:
Master power - on
Playback gain control - off
FET compressor - off
Viper DDC - on, set to sennheiser hd558
Spectrum extension - on, set to 1.0
Firequalizer - off
Convolver - off
Differential surround, field surround, headphone surround+, reverberation - all set to off
Dynamic system - off
Viper bass - off
Viper clarity - off
Tube sound simulator - off
AnalogX - on, set to extreme
Some other info:
My earphones :
1) Sennheiser cx180 street-II - daily outdoor use.
2) Skullcandy Ink'D - used rarely.
3) Sony MDR-ED12LP - used when I'm at home.
List of smartphones I own right now:
1) Xiaomi Redmi Note 3(kenzo)
2) Samsung Galaxy S(i9000)
3) Xiaomi Redmi Note 4(Mido)
4) Samsung Galaxy Note(n7000)
CHANGELOGS:-
V1 - initial release.
V1.1 - tweaked the values a bit to further remove the hissing noise as reported by @MurdererFight.(thanks bro for being the first tester and reporting me)
V1.2 - added some tweaks which will truly enable HiFi audio through DAC with the help of a magisk module..now the DAC detects the impedance of the earphone or the headphone connected.this ensures proper voltage levels through the amp for the earphones/headphones.
V1.3 - Merged surround audio mod along with hifi audio..
Enjoy stereo-like sound on your kenzo (earpiece speaker also outputs sound now xD, videos feel more alive to watch now).Thanks to @AgentBuBu for the soundmod.
I just merged his mod with mine..
V1.4 - Changed the earpiece thresholds to remove the crackling sound and readjusted both the speaker sound to the same level. Now enjoy stereo like never before on your kenzo's speakers. Thanks to @Androbots for reporting this.Also made the mod universal by making a magisk and SuperSU version..
V1.45 - Readjusted the values again for both earpiece and loudspeaker to remove distortion completely, increased audio volume through headphone jack without disturbing the quality. So, now there's a very little drop in the audio but the quality is absolute eargasm.
v1.5 - Readjusted and increased the volume of both earpiece and speaker without inducing distortions. The sound level is more than stock now.
And further pushed the volume through headphones for louder volume..Now the stereo feel is amazing..
And included biQuads support for headphones for expert users. Now you can correct the frequency response of your beloved cans, IEMs.
Link for biQuads is here:
https://forum.xda-developers.com/showpost.php?p=70194192&postcount=226
v1.6 - This time made sure to keep the audio levels same at the earpiece and loudspeaker to increase the stereo and ambience.
Very little changes to headphone volume again. Removed some unused codes. Its true stereo now. Enjoy the stereo on speakers like never before
v1.7 - Fixed the messed up headphone gain as reported by @AravindhStanley and now has 2 new versions...
1) Stereo Version - The present version which you guys are using..earpiece acts as the left speaker and loudspeaker acts as the right speaker. The speaker volume and earpiece volume is balanced
2) HTC 10 Version - The new one!!!! it is based on the new HTC 10 loudspeaker audio output.. Its mono but still uses earpiece for sound. But here the earpiece acts as a mid range and bass booster and significantly increases the detail of sound heard through speakers. Here, the loudspeaker is louder than the earpiece. The earpiece just adds detail here. So don't complain about unbalanced audio levels as its kept unbalanced.
This version removes all the audio libs to disable audio offloading to the dsp..Now the audio goes straight to the DAC untouched..
So please flash your audio mods once again after flashing the mod to get them back working.
Now biQuads is fixed by the founder @chdloc himself..So its finally working now....
I recommend all the users to try both the version and keep the ones which you like.
The link to new biQuads is here:
https://forum.xda-developers.com/showpost.php?p=70194192&postcount=226
v1.7fix - This is only for HTC 10 version...Many users would have experienced no audio from the loudspeaker after flashing v1.7(it wasn't intended to work like that). This issue has been fixed. Now enjoy audio on both earpiece and loudspeaker. Loudspeaker has louder volume than earpiece as earpiece just acts like a mid range and bass booster like before.. Enjoy the sound now..
v1.8 - Made significant changes to headphone audio....
Now the audio is decoded at 24bit 192khz..but still the output is 16bit 48khz..wait for the Poweramp to fix it or if anyone knows how to edit audioflinger please pm me...if audioflinger is hacked, 24bit 192khz audio can be made systemwide....
And enabled hardware Dolby and DTS-HPX support...
Use any of the sound mod which has support for them...you will feel a difference..
Nothing much changed in speaker audio..
Reflash your audio mods again....dirty flash
v1.9 - Rebased with the stock mixer_paths.XML and edited it from the start again..its much clean and removed useless codes from the file..
Fixed the bug - in-call voice through speakers even though the phone was in earpiece mode as reported by @AravindhStanley
Finally the mod is universal! One flashable zip for all ROMs and kernels so no hustle of magisk or su versions.
Dropped the HTC10 version as I dint see much potential in it..It will be continued only on demand..
Temporarily removed biQuads support as it requires an in-depth inspection..will include it in the next build..
V2.0 - *Fixed low audio volume on headphones as reported by many....
*Introducing a stock version, which only tweaks the headphone audio leaving the speakers untouched(stock config)
*Reincarnated the HTC10 version as requested by @mahmoudthassan
V2.1 - *added bass filter for earpiece in both htc10 and stereo version to protect the speaker..
*added a bass filter for headphones also to improve bass range which also reduces distortion..
*created an uninstaller for the mod..
V2.2 - *renamed the mod from HI-FI AUDIO PATCH to shox Audio Mod.
*finally implemented biQuads and added my sound signature to the headphone audio output.
*increased the amp volume to 16 to increase output volume.
*included patched kernels which disable audio codec power gating also for the mod as it is mandatory.
V2.3 -
*Finally integrated aroma installer to the mod which contains all the version in one zip file.
*added high impedance version enabled compander which maxes out the amp gain to default 20 for higher impedance earphones (greater than 32ohm) along with the default one which keeps compander off and amp gain to 16
*enabled CLS_H_LP mode for all other audio streams except headphones(this is always CLS_H_HIFI, its the reason this audio mod was made lol) in order to save power while playing audio through speakers.
*removed high pass filter at 150hz for htc10 variant which was present in v2.2 to enhance music experience.
V2.4 -
*fixed installation script bugs as the wrong versions were getting installed which were different from the selected one.
*built on a newer aroma base borrowed from darkness kernel private build.(thanks to @MOVZX) and made the installer simple and effective. Surp
*reverted CLS_H_LP HPH Mode for speakers and earpiece stream because of audio issues. Its always CLS_H_HIFI for all streams.
*disabled compander for high impedance (greater than 16ohms)mixer paths as I felt that it caused a loss in treble and highs.
*implemented biQuads for loudspeaker in stereo version to make thr sound match with earpiece. Now both the speakers output nice and detailed music.
V2.5 -
*made many changes to aroma installer.
*added everything to the aroma installer. Now you can install and uninstall the mod from a single aroma zip itself.
*changed the aroma theme from ICS to HTC.
*best part - added DPG patch to the aroma installer itself. From now there's no need of flashing DPG version of the kernels. Just select yes for patch cmdline disable power gating and the anykernel2 script patches the kernel to work with shox Audio(thanks to @osm0sis and @scrubjay55).
V2.6 -
*added some hardware eq presets using biQuads based on 5-band parametric EQ from neutron music player.
*there are currently 7 presets including the shox signature -
1)shox(default)
2)Acoustic
3)Rock
4)Pop
5)Bass
6)Treble
7)Middle
*these eq presets does not depend on any app and works for all headphone streams.
*removed OTA survival as the users have to flash shox again anyway to patch cmdline after they update a ROM. So removed it as it is kinda useless.
*updated the in-built cmdline patch script which dynamically detects the present cmdline and adds DPG patch lines only when it is not present in cmdline. So no more confusion of patching DPG for any kernel from now on.
*rebased on new dark material AROMA theme borrowed from Zetsubou kernel(thanks to @Ashish94).
V2.65 -
*made minor changes to the anykernel script which now properly patched the cmdline without breaking the selinux for some users.
V3.0 -
*added flat eq.
*added neutral eq
*added Oreo support
*audiophile mode.
*speaker privacy mode.
*speaker boost mode.(needs to be fixed. Doesn't work yet)
*new flash script written from scratch.(added commands as writing from scratch would be a nightmare)
Guide to create your own biQuads:
This is a guide for creating your own biQuads which replaces the existing ones in the mod.
As you all know, biQuads is a set of 5 IIR filters which can be used to enhance the music and also correct the frequency response of the headphones/earphones which you use.
Continue from here only if you know what sampling rate, bit width, lowpass, highpass, peak filters mean. Otherwise google those terms and learn what they are and what they do
So here's how to design your own biQuads and listen the music in your way:
1) Download biQuads flashable zip from the XDA thread here:
https://forum.xda-developers.com/android/software/reference-qualcomm-audio-codec-iir-t3093000
Thank @chdloc for this great work.
2) Flash the zip in recovery and reboot.
3) You will see an app named biQuads in the apps drawer.
4) Open the app and give it root access.
5)As I told earlier, there are biQuads numbering from 1 to 5
6)After every filter you create for every number, tap design biQuad and wait for 20-30sec. You will be redirected to another window where the app check whether the filter is designed correctly or not with a spectrum graph. After that, increase the biQuad number
7) Do the same step 6 again and again from 1 to 5 until your biQuads is ready.
8)Finally, select review filter where you get a final graph and parameters of different IIR filters.
9)Then select save and give your biQuads a name(make sure there are no spaces included in the name). Click accept and the file gets saved in /sdcard with the filename you specified.
10)Open the *.coeffs from /sdcard where * is the name you specified for the biQuads in a text editor.
11) Replace IIR2 with IIR0 wherever found and change INP1 to INP2 wherever found.
12) Finally copy everything from the file and replace the contents in the mixer paths(present in /system/etc) under path name headphones. You will find similar lines there which are my biQuads already implemented.(make sure that you file editor has root access)
13) Replace those lines perfectly and align the lines as they were. Save the file when you are done and reboot.
14) Magic.
Hi , I'm using NOS stable with stock kernel & already have Dolby Atmos installed . What's the use of this mod ? HiFi DAC enhances sound output via headphone jack right ...
Sent from my Redmi Note 3 using Tapatalk
Hey ppl!
If you guys are interested in audio modding or want to know about audio mods and audio in-depth, you can join this telegram group. Believe me, you won't be disappointed.
Link here:
https://telegram.me/joinchat/DXdmNERAlSzg1U--tujB5A
Here's the link for shox testers group:
https://t.me/joinchat/Ggq39kJnNrotMMi2zbKyqw
Make sure that you join here if you have some suggestions or wanna test the latest releases of shox audio.
VaibhavKumar07 said:
Hi , I'm using NOS stable with stock kernel & already have Dolby Atmos installed . What's the use of this mod ? HiFi DAC enhances sound output via headphone jack right ...
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
You are right..
This globally changes the experience as this enhances audio at a hardware-level instead of Dolby which enhances at a software level.
Please try this and inform me about your new audio experience.
ScreaMySkrillEX
Please thank me guys if this works for you all.and don't forget to vote in the poll....
For me there is no audio output anymore. AOSIP 5.8 and Infected
EDIT: Flashed the zip and now it's working but hissing sound is still there
MurdererFight said:
For me there is no audio output anymore. AOSIP 5.8 and Infected
EDIT: Flashed the zip and now it's working but hissing sound is still there
Click to expand...
Click to collapse
Thanks for using this..
And thank you for your reply.
Can you tell me which kernel are you using??
Important note: don't change the headphone gain values in kernel adiutor or ex kernel manager let it be the default one..
Sorry dude..
I didnt read your post correctly..
You are on infected kernel..
Has the hissing sound increased or decreased after flashing this??
ScreaMySkrillEX said:
Sorry dude..
I didnt read your post correctly..
You are on infected kernel..
Has the hissing sound increased or decreased after flashing this??
Click to expand...
Click to collapse
It increased a bit but less than normal, but the sound quality increased! It's not big by the way. Thanks for the mod!
(Also, I don't remember if Infected use Franco or Flar2 audio control but I remember that Flar2 give that little noise)
MurdererFight said:
It increased a bit but less than normal, but the sound quality increased! It's not big by the way. Thanks for the mod!
(Also, I don't remember if Infected use Franco or Flar2 audio control but I remember that Flar2 give that little noise)
Click to expand...
Click to collapse
No bro..
 @flar2 sound control actually reduces the noise..
Please try flashing elementalx kernel..
You will definitely enjoy the audio..
MurdererFight said:
It increased a bit but less than normal, but the sound quality increased! It's not big by the way. Thanks for the mod!
(Also, I don't remember if Infected use Franco or Flar2 audio control but I remember that Flar2 give that little noise)
Click to expand...
Click to collapse
No bro..
 @flar2 sound control actually reduces the noise..
Please try flashing elementalx kernel..
You will definitely enjoy the audio..
Here's an update
Try flashing this for more noise removal..
ScreaMySkrillEX said:
No bro..
@flar2 sound control actually reduces the noise..
Please try flashing elementalx kernel..
You will definitely enjoy the audio..
Here's an update
Try flashing this for more noise removal..
Click to expand...
Click to collapse
Reduced a but more, still perceptible but it's because of V4Arise. Thanks for the update
MurdererFight said:
Reduced a but more, still perceptible but it's because of V4Arise. Thanks for the update
Click to expand...
Click to collapse
OK. I recommend you to use viper4android standalone apk without arise sound mod as it clogs the audio by adding noise to the soundstage.
Thank you
ScreaMySkrillEX
Appreciate the credit man, thanks!
ZeroInfinity said:
Appreciate the credit man, thanks!
Click to expand...
Click to collapse
You are really the god of android audio modding
I firstly appreciate you for your great work..
Please keep your great work going..
V1.2 is up!!
Changes:
Added some tweaks which will truly enable HiFi audio through the DAC with the help of a magisk module..now the DAC detects the impedance of the earphone or headphone connected.this ensure proper voltage levels through the amp for the earphone/headphone.
Enjoy more subtle and richful audio..
ScreaMySkrillEX
ScreaMySkrillEX said:
V1.2 is up!!
Changes:
Added some tweaks which will truly enable HiFi audio through the DAC with the help of a magisk module..now the DAC detects the impedance of the earphone or headphone connected.this ensure proper voltage levels through the amp for the earphone/headphone.
Enjoy more subtle and richful audio..
ScreaMySkrillEX
Click to expand...
Click to collapse
Wanna try this..
I'm having Nitrogen OS 7.1.2 Stock Kernel, Zcx TWRP with SuperSU installed (Not Magisk),
Arise Dolby ATMOS,
VIPER4ARISE.
Can I use this with Arise Mod?
Ajendra25 said:
Wanna try this..
I'm having Nitrogen OS 7.1.2 Stock Kernel, Zcx TWRP with SuperSU installed (Not Magisk),
Arise Dolby ATMOS,
VIPER4ARISE.
Can I use this with Arise Mod?
Click to expand...
Click to collapse
Yeah! Sure you can..
Try it and tell me..
Please vote the poll..

[APP] Real 3D surround music experience.

After extensive music search i never thought this music app can beat doulby atmos or other music mods likes v4a.
Yes i definitely say without tuning anything this music app is giving awsome music experience in real 3D sound effect.
Along with v4A this is cherry on ice scream.
Overview of app and settings :
https://youtu.be/EZAbeLawjgQ
Download the app: (unreleased free version)
https://play.google.com/store/apps/details?id=com.tamalbasak.musicplayer3d
What app gives:
1) its a music app with great 3d equilizer control.
2)looks awesome with material desing
How to:
1)Open app configure it give all permissions
2)enable virtual3d and surround 3d tab
3)) set equizer as per u r Requiment but i recommend keep all stock because there will be some sound distortion
4)now all is done but if you want more great sound
Then u need v4A
Open app and Enable spectrum extension tab
Field surround tab , diffential surround tab, viper clarity tab.
Done
Now play music only via 3D music 7.1 app only
Feel the difference.
Specially how can i describe sound is like i am hearing music sound separated for each ear phones pairs sitting in larg cinema hall sound is coming from All directions that's aswome though such effects are available for doulby and v4a but here that impact is very good as compared to them.
May be earphones are also reposible for best sound.
Here earphones i am using
https://youtu.be/89kZxHuhhWc
I test it, you must close developer options to run the app, didn't work with root or bootloader open, but you can use magiskhide for this
Toni Moon said:
I test it, you must close developer options to run the app, didn't work with root or bootloader open, but you can use magiskhide for this
Click to expand...
Click to collapse
Newest version doesn't need to do that.
How is the sound? Can u plz tell users
The sound it's similar to Dolby Atmos effect, more spacial if now the tool hasn't restrictions i test it again.
So this sound mod only works within the app and not on apps like youtube or spotify?
This sound effect was kind of cringy for me. Using v4a audiophile on liquidremix pie... Does this really sound nice to you guys? For me it felt like sitting high in a sewer... But there was alot of settings I didn't bother playing with, that's nice I guess... And why do I need to use magisk hide to run it
bartjeh1991 said:
So this sound mod only works within the app and not on apps like youtube or spotify?
Click to expand...
Click to collapse
Yes it only for mp3 music
efinityy said:
This sound effect was kind of cringy for me. Using v4a audiophile on liquidremix pie... Does this really sound nice to you guys? For me it felt like sitting high in a sewer... But there was alot of settings I didn't bother playing with, that's nice I guess... And why do I need to use magisk hide to run it
Click to expand...
Click to collapse
Its 3d effect is awsome but along with v4a is more awsome . donts use audiophile profile just enable tabs that i mentioned in video for v4a and keep all stock settings for music app too make sure virtual 3d and 7. 1 surround effect is enabled.
And then play music.
Specially how can i describe sound is like i am hearing music sound separated for each ear phones pairs sitting in larg cinema hall sound is coming from All directions that's aswome though such effects are available for doulby and v4a but here that impact is very good as compared to them.
May be earphones are also reposible for best sound.
Here earphones i am using
https://youtu.be/89kZxHuhhWc
I have just downloaded it keeps saying developer option is on, I can't really keep developer options off, but thanks anyway, cheers.
vtec303 said:
I have just downloaded it keeps saying developer option is on, I can't really keep developer options off, but thanks anyway, cheers.
Click to expand...
Click to collapse
Disable developer option, hide app from Root in magisk.
Open app Configure it then after that you can enable developers option but always hide it from root
pankspoo said:
Disable developer option, hide app from Root in magisk.
Open app Configure it then after that you can enable developers option but always hide it from root
Click to expand...
Click to collapse
I use poweramp, the DSP on it is really good with a lot of settings and works well with root and DO on, I will stick to that, but thanks for your help, cheers.
pankspoo said:
Its 3d effect is awsome but along with v4a is more awsome . donts use audiophile profile just enable tabs that i mentioned in video for v4a and keep all stock settings for music app too make sure virtual 3d and 7. 1 surround effect is enabled.
And then play music.
Specially how can i describe sound is like i am hearing music sound separated for each ear phones pairs sitting in larg cinema hall sound is coming from All directions that's aswome though such effects are available for doulby and v4a but here that impact is very good as compared to them.
May be earphones are also reposible for best sound.
Here earphones i am using
Click to expand...
Click to collapse
I hear a Ms latency only (differential surround in v4a) with this and audiophile, I'll try this with your settings and see how it works out
Over the years I have probably tried almost everything there is to try of the high-end and higher-end(Free,paid and costly)type music player applications out there.Currently running the 7+1 Surround Sound and 3D based X3 Music Player was in fact an actually startling surprise sound wise,I can recall.So natural,with an audio transparency so visible and audio tactile that I actually teared up from emotional sensory overload the first time I listened to it.And still may do yet,for the very same reason.But I will definitely also try this combination.
So only with mp3s and only with headphones? On top of that you have to install a module, disable dev options (cringy), hide from magisk just to open?
Basically this tells me "IF" this module were to brick my phone I would be SOL due to no longer having dev options enabled..... Thank you for the work but I'll pass on this one.
dgunn said:
So only with mp3s and only with headphones? On top of that you have to install a module, disable dev options (cringy), hide from magisk just to open?
Basically this tells me "IF" this module were to brick my phone I would be SOL due to no longer having dev options enabled..... Thank you for the work but I'll pass on this one.
Click to expand...
Click to collapse
Its not deal breaking and it will not brick anything.
3d virtual surround sound is top notch as compared to any mod like v4a, doulby atmos or audiofx

Personal modes in Quad Dac?

Hi.
Is there any way to "hack" quad dac and have an option to add own equalizer modes to it?
its modes are reduculous. "Bas boost" destroys whole the music experience.
And we have no option to ad our own curves/modes to it.
Any help?
Martinezz123 said:
Hi.
Is there any way to "hack" quad dac and have an option to add own equalizer modes to it?
its modes are reduculous. "Bas boost" destroys whole the music experience.
And we have no option to ad our own curves/modes to it.
Any help?
Click to expand...
Click to collapse
Hack? It's called Root, when you are the admin of your handheld computer -- your smartphone.
With root you can not only enable the LG DTS Surround Sound framework present in latter Oreo and Pie firmware (or not, your choice) you can also install the LG Equalizer and set your own custom profile.
See attached screenshot. See the word "Custom" at the bottom.
Go here for more information on how to root your V30:
ROOT Your LG V30!
https://forum.xda-developers.com/lg-v30/how-to/root-v30-t3927154

Any Dolby audio mod for Android 11 no root?

Is there any dolby audio mod for Android 11 with equalizer such as atmos, digital plus or dolby audio without root ?
As far as I know no you must have root. I've used Dolby Digital v7.3 from 2nd post located here quite a bit on my last device which was a OnePlus 6t and it worked very well. There was a small bug that didn't effect anything where when I initially set DD up, when turning one of the setting on or off I would have to reopen the app because it would close and push me out of it when making these adjustments. I don't mean the EQ adjustments in talking about the four other sound switches on the app below where the EQ is ok DD. This is a known bug but like I said if didn't cause anything to not work I would just flash 7.3 in magisk manager then during initial set-up I would turn on these settings one by one and one at a tone due to this issue and the app pushing me out every time I turned on a switch. Once I had all four on how I wanted them then I would adjust the EQ depending on what I was listening to.. I don't think there are Dolby Mods that can be used without root... I believe they'd have to be made as part of the rom to be that way like Atmos comes on some devices but I've never seen anything like this besides from an oem that doesn't require root.
Dolby Digital 7.3 is in the second post here:
[6.0-12.0][Magisk]Dolby Digital Plus[upd.20211005]
Dolby Digital Plus for 9.0-12.0 OS Need selinux permissive Hi. I present the mod Dolby Digital Plus (interface and functionality is the same as that of Dolby Atmos). Theoretically should work on OS 6.0-9.0. I checked only on Oreo and Pie...
forum.xda-developers.com
flash713 said:
As far as I know no you must have root. I've used Dolby Digital v7.3 from 2nd post located here quite a bit on my last device which was a OnePlus 6t and it worked very well. There was a small bug that didn't effect anything where when I initially set DD up, when turning one of the setting on or off I would have to reopen the app because it would close and push me out of it when making these adjustments. I don't mean the EQ adjustments in talking about the four other sound switches on the app below where the EQ is ok DD. This is a known bug but like I said if didn't cause anything to not work I would just flash 7.3 in magisk manager then during initial set-up I would turn on these settings one by one and one at a tone due to this issue and the app pushing me out every time I turned on a switch. Once I had all four on how I wanted them then I would adjust the EQ depending on what I was listening to.. I don't think there are Dolby Mods that can be used without root... I believe they'd have to be made as part of the rom to be that way like Atmos comes on some devices but I've never seen anything like this besides from an oem that doesn't require root.
Dolby Digital 7.3 is in the second post here:
[6.0-12.0][Magisk]Dolby Digital Plus[upd.20211005]
Dolby Digital Plus for 9.0-12.0 OS Need selinux permissive Hi. I present the mod Dolby Digital Plus (interface and functionality is the same as that of Dolby Atmos). Theoretically should work on OS 6.0-9.0. I checked only on Oreo and Pie...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks
It was very helpful.
snehasish2000 said:
Is there any dolby audio mod for Android 11 with equalizer such as atmos, digital plus or dolby audio without root ?
Click to expand...
Click to collapse
Hi mate,
Try eqfy app from official Google store - it's damm good. I used to have rooted device and have done some research to get good app without root that do job really good and that is what I have found.

Categories

Resources