Hi, noob here!
I have a Coolpad Torino S (a cheap Chinese Android 5.1 phone) I was using to tether a few devices to the internet. A few days ago it started behaving oddly, so I restarted it. As expected, it restarted and brought up the manufacturer logo splash screen. It then went to a black screen and vibrated non-stop.
It has a non-removable battery, so I held down power until it switched off, but all it did was bring up the logo again (without turning off) and then vibrated relentlessly.
After a bit of trial and error, I managed to get into recovery. I wiped the cache and restarted - endless vibration.
I returned to recovery and factory reset the phone, then restarted - endless vibration.
I've never seen this behaviour from a phone before. I realise I've probably killed it, but I wonder if reflashing the firmware might stop this vibration issue (as it does seem like a software problem). The problem I face is that there does not seem to be a single stock or custom ROM anywhere on the web for this device. One Russian website claims to have the stock ROM, so I downloaded it, but the RAR file is password protected (with no hint as to what the password might be), and so utterly useless.
I'd appreciate any advice on how I might fix the phone or find a ROM!
The model number is E561 (bizarrely, there is a near-identical Coolpad phone - the Coolpad Fancy - that shares the same model number despite having different hardware in several key areas, so I don't know whether using that ROM is a risk worth taking).
Hi , here is right firmware for your device:
https://files.fm/u/5auxsp2g
How to flash examle :
https://www.youtube.com/watch?v=b_yyilVsn5I
Good luck ...
Teddy Lo said:
Hi , here is right firmware for your device:
Good luck ...
Click to expand...
Click to collapse
Thanks a lot! However, that appears to be for the Coolpad Fancy rather than the Torino S (same model number, different spec). The ROM in the link is for a phone with (apparently) half the storage capacity (8GB vs 16GB in the Torino S) and a different version of Bluetooth (4.0 vs 4.1 LE in the Torino S). I think I read somewhere else that the Fancy has a lower res video on the camera too.
Will it be safe to flash onto the wrong phone? Obviously it can't get much worse than its current state, but at least it's vaguely responding when I turn it on etc at the moment...
tesbreag said:
Thanks a lot! However, that appears to be for the Coolpad Fancy rather than the Torino S (same model number, different spec). The ROM in the link is for a phone with (apparently) half the storage capacity (8GB vs 16GB in the Torino S) and a different version of Bluetooth (4.0 vs 4.1 LE in the Torino S). I think I read somewhere else that the Fancy has a lower res video on the camera too.
Will it be safe to flash onto the wrong phone? Obviously it can't get much worse than its current state, but at least it's vaguely responding when I turn it on etc at the moment...
Click to expand...
Click to collapse
Hi , don't flash firmware for Fancy , I will upload on the internet correct firmware for Torino soon , sorry I didn't checked that first firmware is for Fancy . Stay updated
Teddy Lo said:
Hi , don't flash firmware for Fancy , I will upload on the internet correct firmware for Torino soon , sorry I didn't checked that first firmware is for Fancy . Stay updated
Click to expand...
Click to collapse
Hi again. Thanks for the clarification!
Just to confuse things more, my phone is the Coolpad Torino S. There is another phone called the Coolpad Torino which again is a different phone entirely (much bigger screen and very different hardware than the Torino S).
It is quite easy to find ROMs for the Fancy and (IIRC) the Torino. It's the Torino S that is impossible to find. so if you can help with that I'd be very grateful!
tesbreag said:
Hi again. Thanks for the clarification!
Just to confuse things more, my phone is the Coolpad Torino S. There is another phone called the Coolpad Torino which again is a different phone entirely (much bigger screen and very different hardware than the Torino S).
It is quite easy to find ROMs for the Fancy and (IIRC) the Torino. It's the Torino S that is impossible to find. so if you can help with that I'd be very grateful!
Click to expand...
Click to collapse
This firmware is for Torino S verion like in this video! If you don't know what is what send your device to repair center.
https://www.youtube.com/watch?v=VH8Shjl6_hs
Teddy Lo said:
This firmware is for Torino S verion like in this video! If you don't know what is what send your device to repair center.
https://www.youtube.com/watch?v=VH8Shjl6_hs
Click to expand...
Click to collapse
Thanks for the reply. I don't know if I said something wrong and if I did I apologise - it was never my intention. This whole Coolpad situation is very confusing, that was my only point (three phones, 2 with almost identical names and 2 with identical model numbers, all completely different!)
I did see that video before but based on the images I assumed it was for a manual update to a working phone (as it goes into settings etc). I will look into this solution if you think it is indeed the appropriate file?
Coolpad seem to offer zero support, so even if I wanted to send it to a repair centre, it would be impossible!
Thanks again!
tesbreag said:
Thanks for the reply. I don't know if I said something wrong and if I did I apologise - it was never my intention. This whole Coolpad situation is very confusing, that was my only point (three phones, 2 with almost identical names and 2 with identical model numbers, all completely different!)
I did see that video before but based on the images I assumed it was for a manual update to a working phone (as it goes into settings etc). I will look into this solution if you think it is indeed the appropriate file?
Coolpad seem to offer zero support, so even if I wanted to send it to a repair centre, it would be impossible!
Thanks again!
Click to expand...
Click to collapse
Hi , no problem dude just I wanted to help you to solve your problem with your device . That is truth that unknown device like yours is complicated with support and the only available firmware for your device was that what I send you.
This flash file is for your device Coolpad Torino S E561 (SK3-U00) Dual SIM also you have same new device with same firmware SK3-U00 . Google a little bit this and you will see the new devices has the same firmware version . I know it is shame for support but what can I say to you about is to don't buy unknown devices and if you thinking about buying like those devices do little research about their support and what problems can you face with that device .
I wish you all the best with your unbricking device .
With Respekt
Teddy Lo said:
Hi , no problem dude just I wanted to help you to solve your problem with your device . That is truth that unknown device like yours is complicated with support and the only available firmware for your device was that what I send you.
This flash file is for your device Coolpad Torino S E561 (SK3-U00) Dual SIM also you have same new device with same firmware SK3-U00 . Google a little bit this and you will see the new devices has the same firmware version . I know it is shame for support but what can I say to you about is to don't buy unknown devices and if you thinking about buying like those devices do little research about their support and what problems can you face with that device .
I wish you all the best with your unbricking device .
With Respekt
Click to expand...
Click to collapse
Thanks for all your help so far. I've downloaded and extracted the firmware file, and YGDP v4.03 as recommended.
One more question... would the Coolpad driver in the Fancy file you linked before be the same for the Torino S? I'm guessing the drivers are the standard Qualcomm USB drivers, right?
tesbreag said:
Thanks for all your help so far. I've downloaded and extracted the firmware file, and YGDP v4.03 as recommended.
One more question... would the Coolpad driver in the Fancy file you linked before be the same for the Torino S? I'm guessing the drivers are the standard Qualcomm USB drivers, right?
Click to expand...
Click to collapse
Probably it will work if not use this one:
https://drive.google.com/uc?id=1M4HjlqcwcTUJNRKufa5Vr4oejVTUE24D&export=download
Good luck , and let me know if you fixed
Teddy Lo said:
Probably it will work if not use this one:
https://drive.google.com/uc?id=1M4HjlqcwcTUJNRKufa5Vr4oejVTUE24D&export=download
Good luck , and let me know if you fixed
Click to expand...
Click to collapse
After a great deal of messing around with different versions of YGDP and various CoolPad drivers, I finally got to the point where YGDP was able to find and transfer data to my phone.
10 minutes later, the phone rebooted and now it seems to be fully working!
Many thanks for your help!
An update on this, a year and a pandemic on. The phone has died again, and this time YGDP won't bring it back.
It is failing with a flash write error, so I can only assume this is now a hardware fault, unless any XDA geniuses can suggest anything further to try? YGDP gives the following errors:
Code:
12:32:38 CELL0: Start to download emmc_appsboot.mbn file ...
12:32:38 CELL0: transmit emmc_appsboot.mbn file size info OK
12:32:39 CELL0: Fail to transmit emmc_appsboot.mbn file Flag code
12:32:39 CELL0: Res:flash write failure
12:32:39 CELL0: Fail to transmit emmc_appsboot.mbn file data !
12:32:39 CELL0: Lock bootloader ...
12:32:39 CELL0: Download failed,please try again!!
12:32:39 CELL0: Total download time elapsed: 0 min : 2 sec
12:32:39 CELL0: Downloading all files: Failed!
I can still get into Recovery (which also flashes up a litany of cache read/mount errors), and have tried wiping caches and factory resetting multiple times.
Any final suggestions before I consign it to the scrapheap?
Hey same issue here, can you please explain how you managed to get it to recovery?
coolpad e502
Related
Dear Lenovo Support,
I regret to say that unfortunately I had an opportunity to update the Android version of my phone Lenovo P780 from Android 4.2.2(stock version) to Android 4.4 Kit-Kat ver. latest released by your good Company, that I have downloaded directly from the Integrated Lenovo system update over Air/Wi-Fi.
Then, just right after update installation and phone restart I immediately started experiencing worst ever problem with Voice quality transmission while talking on the phone with any of subscribers/friends/colleagues.
Nobody can hear my voice at all or hears rustling with constant voice interruptions. Very poor voice quality transmission indeed.
You are kindly requested to support my case and provide qualified instructions on how to fix this problem and avoid farther problems, as it is impossible to use the phone anymore while such problems exists.
Thanking you in advance for your kind assistance which is highly appreciated and hoping to receive your soonest reply,
Regards,
Alexander Kozubay
E-mail: [email protected]
kozav100 said:
Dear Lenovo Support,
I regret to say that unfortunately I had an opportunity to update the Android version of my phone Lenovo P780 from Android 4.2.2(stock version) to Android 4.4 Kit-Kat ver. latest released by your good Company, that I have downloaded directly from the Integrated Lenovo system update over Air/Wi-Fi.
Then, just right after update installation and phone restart I immediately started experiencing worst ever problem with Voice quality transmission while talking on the phone with any of subscribers/friends/colleagues.
Nobody can hear my voice at all or hears rustling with constant voice interruptions. Very poor voice quality transmission indeed.
You are kindly requested to support my case and provide qualified instructions on how to fix this problem and avoid farther problems, as it is impossible to use the phone anymore while such problems exists.
Thanking you in advance for your kind assistance which is highly appreciated and hoping to receive your soonest reply,
Regards,
Alexander Kozubay
E-mail: [email protected]
Click to expand...
Click to collapse
Look in post How about some modems in the section Vibe.
Root your phone and try change modems from there. Backup first.
Reply
Dear stympy,
Thank you very much for replying to this matter.
If I get you right, this is distinctively a problem with modem, whereas the version of the modem included in general update to Kit-Kat version for users worldwide that Chinese developers Lenovo published is not compatible to work with all countries cellular network providers, particularly in my country - Ukraine and the only solution for fixing the problem is to find a compatible/proper firmware of the modem.
Please confirm.
Since, my Lenovo P780 is fixed to stock version and never been rooted before, can you please advise if root is compulsory and provide the link with step-by step guide in order to root the phone if it is compulsory to change the modem version and the link with modem versions.
Also, please advise if I will need to change for a custom rom in case of modem change etc.
Thanks again for your kind support,
Regards,
Alexander Kozubay
stympy said:
Look in post How about some modems in the section Vibe.
Root your phone and try change modems from there. Backup first.
Click to expand...
Click to collapse
kozav100 said:
Dear stympy,
Thank you very much for replying to this matter.
If I get you right, this is distinctively a problem with modem, whereas the version of the modem included in general update to Kit-Kat version for users worldwide that Chinese developers Lenovo published is not compatible to work with all countries cellular network providers, particularly in my country - Ukraine and the only solution for fixing the problem is to find a compatible/proper firmware of the modem.
Please confirm.
Since, my Lenovo P780 is fixed to stock version and never been rooted before, can you please advise if root is compulsory and provide the link with step-by step guide in order to root the phone if it is compulsory to change the modem version and the link with modem versions.
Also, please advise if I will need to change for a custom rom in case of modem change etc.
Thanks again for your kind support,
Regards,
Alexander Kozubay
Click to expand...
Click to collapse
Hi Alexander. Yes
First you must tell me if your system has been updated to KK version.Andoid 4.4.2.
Second you must tell me allso if your ROM is ROW(Rest Of the World) or Chinese.
Here is the link with how to root your phone:http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605.
This is for ROW.
Because you are from Ukraine(by the way i am sorry what is going on in your country now) here are 2 sites with two awsome comunityes from i learn alot of things:
http://4pda.ru/forum/index.php?showtopic=566352
http://lenovo-forums.ru/topic/1703-...ля-lenovo-p780-custom-rom/page-91#entry214290
I hope this will help you alot. Good Luck.
Radiomodule
Good day stympy,
Sorry for not replying for a long time. Getting back to the issue where nothing changed to a good side and I still experience problems when nobody hears me properly as if I am living underground in the tunnel and the Wi-Fi signal by the way is not stable.
My Lenovo P780 has the next firmvware:
1. Firmware ver. P780_ROW_S223, 2014/09/01 - last one updated over air recently
2. Firmware of radio module: P780.ROW.V104, 2014/09/01
Not sure whether the phone was rooted before, as I got it new device but from the seller-guy who flashed the phone.
Do I have a chinese or european version ?>
Please advise what are my next actions to normalise the work of the device.
Thanks in advance for your support
stympy said:
Hi Alexander. Yes
First you must tell me if your system has been updated to KK version.Andoid 4.4.2.
Second you must tell me allso if your ROM is ROW(Rest Of the World) or Chinese.
Here is the link with how to root your phone:http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605.
This is for ROW.
Because you are from Ukraine(by the way i am sorry what is going on in your country now) here are 2 sites with two awsome comunityes from i learn alot of things:
http://4pda.ru/forum/index.php?showtopic=566352
http://lenovo-forums.ru/topic/1703-...ля-lenovo-p780-custom-rom/page-91#entry214290
I hope this will help you alot. Good Luck.
Click to expand...
Click to collapse
kozav100 said:
Good day stympy,
Sorry for not replying for a long time. Getting back to the issue where nothing changed to a good side and I still experience problems when nobody hears me properly as if I am living underground in the tunnel and the Wi-Fi signal by the way is not stable.
My Lenovo P780 has the next firmvware:
1. Firmware ver. P780_ROW_S223, 2014/09/01 - last one updated over air recently
2. Firmware of radio module: P780.ROW.V104, 2014/09/01
Not sure whether the phone was rooted before, as I got it new device but from the seller-guy who flashed the phone.
Do I have a chinese or european version ?>
Please advise what are my next actions to normalise the work of the device.
Thanks in advance for your support
Click to expand...
Click to collapse
Hi. You have the ROW version , thats mean: Rest Of the Worl, not Chinese.
To check if your phone has root, can download any root checker from market and see.
The next step is to change modem software you must root your phone and install custom recovery like TWRP or CWM.
After root and custom recovery go to my post: How about some modems and you will find there alot of modems for KK. That modems you must use. Not others. They are located in folder:Modems for S221 LATEST UPDATE. For Europe i recomend: modem_P780_V101_Life_Vibe.zip
Your firmware is the last OTA for sure.
Good Luck.
Modem change
Thanks for your clear explanations stympy. For sure will try out today, evening time.
Before I proceed can you please advise
1. How to make proper backup.
2. Is there a way to test the quality and level of the signal after modem change procedure to see and check if the level of transmission of signal is high enough to be sure that this modem firmware suits me best.
Thanks a lot in advance
Will revert with results in any case.
stympy said:
Hi. You have the ROW version , thats mean: Rest Of the Worl, not Chinese.
To check if your phone has root, can download any root checker from market and see.
The next step is to change modem software you must root your phone and install custom recovery like TWRP or CWM.
After root and custom recovery go to my post: How about some modems and you will find there alot of modems for KK. That modems you must use. Not others. They are located in folder:Modems for S221 LATEST UPDATE. For Europe i recomend: modem_P780_V101_Life_Vibe.zip
Your firmware is the last OTA for sure.
Good Luck.
Click to expand...
Click to collapse
kozav100 said:
Thanks for your clear explanations stympy. For sure will try out today, evening time.
Before I proceed can you please advise
1. How to make proper backup.
2. Is there a way to test the quality and level of the signal after modem change procedure to see and check if the level of transmission of signal is high enough to be sure that this modem firmware suits me best.
Thanks a lot in advance
Will revert with results in any case.
Click to expand...
Click to collapse
Hi.
1.The proper backup for me is with custom recovery TWRP. You can allso backup the 2 folders(system/etc/mddb and firmware) with the modem software with ZIPME fom Google Magazin.
2. The quality and level of signal after modem change is to keep monitoring you phone signal and speak. After this you will see if signal is crushing and the one who you talk is hearing you and revert !
Usb driver
URGENT URGENT URGENT
Please provide a link for downloading a USB driver for Lenovo P780 on Windows XP x86
Thanks
stympy said:
Hi.
1.The proper backup for me is with custom recovery TWRP. You can allso backup the 2 folders(system/etc/mddb and firmware) with the modem software with ZIPME fom Google Magazin.
2. The quality and level of signal after modem change is to keep monitoring you phone signal and speak. After this you will see if signal is crushing and the one who you talk is hearing you and revert !
Click to expand...
Click to collapse
kozav100 said:
URGENT URGENT URGENT
Please provide a link for downloading a USB driver for Lenovo P780 on Windows XP x86
Thanks
Click to expand...
Click to collapse
If its so urgent... try this one !
****, I am still stuck on with USB driver Installation.
The files you have provided, I have successfully downloaded them.
When I connect the device to my laptop, the PC sees the device and asks for a driver, I have installed these drivers you provided but my laptop does not recognize them as compatible drivers saying that device is not recognised, I am stuck and I think I can not move any further because of this
Zero results
As the result of my many hours attempts yesterday to make the phone working and recognized by the PC properly lead to zero results.
The problem with the driver. The PC detects the connected device asks for a driver, installed the drivers you have provided stympy. But Lenovo P780 icon doesn't appear in the list of devices in My Computer or Explorer or when appears after Clicking on it, does not show the content at all. Empty list.
Owning many different phones, I neved had such a problem before. All devices after short drivers installation were always recognizable at first connection.
Strange and very dissapointing.
kozav100
kozav100 said:
As the result of my many hours attempts yesterday to make the phone working and recognized by the PC properly lead to zero results.
The problem with the driver. The PC detects the connected device asks for a driver, installed the drivers you have provided stympy. But Lenovo P780 icon doesn't appear in the list of devices in My Computer or Explorer or when appears after Clicking on it, does not show the content at all. Empty list.
Owning many different phones, I neved had such a problem before. All devices after short drivers installation were always recognizable at first connection.
Strange and very dissapointing.
kozav100
Click to expand...
Click to collapse
Hi. The computer with windows installed recognize this piece of hardware for just a second in device manager. I have windows 7 installed and when i connect the phone some autorun starts with the driver. Your phone does that ?
Attempts for phone root with intention to change the modem
Dear stympy and the rest of to whom it may concern,
Writing again to submit my dissapointment that has no positivie results at all. Not able to root, install TWRP or any other ROM Manager software etc...nothing!
Would like to specify that I have a Lenovo P780 device with 4 GB memory and most likely a device for sale on Chinese markets as labels on the cover box of the phone and stickers under the back cover are in Chinese language.
Although, the device I bought from a seller as new device was upgraded to a firmware he said, in fact I do update my firmware over air which is designated for the "Rest of the World" (as per Settings info.).
I go through the step-by-step guide written by stympy and I am stuck with SP Flash Tools software.. I tried using the SP Flash Tools as per the guide while the phone is in switched on and off conditions but the utility does nothing to the phone, as if it the phone is not recognized by SP Flash Tools.
When I connect the phone to the PC in the switched off condition I get the message thatn an as USB device not recognized asking for a driver (I browse to the drivers folder indicating the correct driver initially it was recognized and now not anymore) but when I Connect the phone to the PC in the switched on condition then phone is fine, immediately get recognized and I get access to the Internal Memory and SD Card content.
Very, very strange and ridiculous behaviour.
Same problem actuall to other PC connected with my Lenovo P780.
I wonder if there is another way to root my phone and change modem firmware. Please keep me advised accordingly,
Thanks a lot for your support
kozav100
kozav100 said:
Dear stympy and the rest of to whom it may concern,
Writing again to submit my dissapointment that has no positivie results at all. Not able to root, install TWRP or any other ROM Manager software etc...nothing!
Would like to specify that I have a Lenovo P780 device with 4 GB memory and most likely a device for sale on Chinese markets as labels on the cover box of the phone and stickers under the back cover are in Chinese language.
Although, the device I bought from a seller as new device was upgraded to a firmware he said, in fact I do update my firmware over air which is designated for the "Rest of the World" (as per Settings info.).
I go through the step-by-step guide written by stympy and I am stuck with SP Flash Tools software.. I tried using the SP Flash Tools as per the guide while the phone is in switched on and off conditions but the utility does nothing to the phone, as if it the phone is not recognized by SP Flash Tools.
When I connect the phone to the PC in the switched off condition I get the message thatn an as USB device not recognized asking for a driver (I browse to the drivers folder indicating the correct driver initially it was recognized and now not anymore) but when I Connect the phone to the PC in the switched on condition then phone is fine, immediately get recognized and I get access to the Internal Memory and SD Card content.
Very, very strange and ridiculous behaviour.
Same problem actuall to other PC connected with my Lenovo P780.
I wonder if there is another way to root my phone and change modem firmware. Please keep me advised accordingly,
Thanks a lot for your support
kozav100
Click to expand...
Click to collapse
Hi. Lets try this trick :
1. Look on the internet for this app called 1 Mobile Market apk
2. Download and install.
3. There you will find alot of chinese app for rooting.
4. Install and try to root your phone.
5. If you succeed instal Mobileuncle Tool and flash TWRP recovery from there.
6. After this you can flash modems
7. Good luck.
8. Waiting for feedback.
Sent from my Lenovo P780
SUCCEEDED!!!
I am back with good news. I managed, I managed!!!! Yeeehaaaa!!!!
I managed to flash TWRP and root by the method you have described above stympy.
Now, what I was doing wrong is that upon running SP Flash Tools software I was connecting the phone with USB Cable before pressing the Download Not Firmware upgrade button and NOT AFTER as advised (1) and my second fault is that I used only one scatter file coming together with TWRP and recovery.img.
I have succeeded flashing with the alternative scatter files for 4 GB version.
Check with Root checker - device rooted!!
Now, going further I have put the model firmware as "modem_P780_V23_S226_ROW" on the internal memory of the phone and will try to install it via TWRP manager.
Please advise if this firmware will not work well or work as bad as previous one, Do i just install another modem firmware on top of the installed one and that is it ?
Thanks
kozav100 said:
I am back with good news. I managed, I managed!!!! Yeeehaaaa!!!!
I managed to flash TWRP and root by the method you have described above stympy.
Now, what I was doing wrong is that upon running SP Flash Tools software I was connecting the phone with USB Cable before pressing the Download Not Firmware upgrade button and NOT AFTER as advised (1) and my second fault is that I used only one scatter file coming together with TWRP and recovery.img.
I have succeeded flashing with the alternative scatter files for 4 GB version.
Check with Root checker - device rooted!!
Now, going further I have put the model firmware as "modem_P780_V23_S226_ROW" on the internal memory of the phone and will try to install it via TWRP manager.
Please advise if this firmware will not work well or work as bad as previous one, Do i just install another modem firmware on top of the installed one and that is it ?
Thanks
Click to expand...
Click to collapse
Hi. Yes you are right. Flash modem reboot see if works, if dont work reflash other so on and on and on.. When you flash new modem will overite the old modem.
Good Luck, and waiting for feedback.
Modem Firmware change success
Dear stympy,
Once again writing my feedback to confirm success in modem firmware flashing, changing to "modem_P780_V23_S226_ROW". (looks to be latest one available to download and with hopes that most corrected version)
From now on the voice quality is better enough than before, the voice quality is much clearer and higher, but still not smooth enough.
During the tel.conversations on the other line, the person who I am talking to hears my speech with interruptions from time to time.
Do you think I still need to give another tries for alternative firmware ?
Please provide again the link to the folder with modem firmwares stored and also advise which firmware best suits my case.
Thanks
Regards,
kozav100
kozav100 said:
Dear stympy,
Once again writing my feedback to confirm success in modem firmware flashing, changing to "modem_P780_V23_S226_ROW". (looks to be latest one available to download and with hopes that most corrected version)
From now on the voice quality is better enough than before, the voice quality is much clearer and higher, but still not smooth enough.
During the tel.conversations on the other line, the person who I am talking to hears my speech with interruptions from time to time.
Do you think I still need to give another tries for alternative firmware ?
Please provide again the link to the folder with modem firmwares stored and also advise which firmware best suits my case.
Thanks
Regards,
kozav100
Click to expand...
Click to collapse
Hi. You could try one more who i think is the same as v23. The modem from LiFe rom must do the job. I used both and have no problems.
Good Luck.
I will for sure try the firmware you have advised above.
Moreover, I proceed to receive an OTA Updates for the Android system, but taking into account the last issue with modem, understanding that it will not do any good only harm. What do you think about it ?
Regards,
kozav100
Guys, the phone went into brick mode simply while charging. Please help me with links or ideas on how to find / create a debricking .zip or folder to flash this Qualcomm Snapdragon 400 - 8930AB device.
Why would a service get use of my money when I know it is possible to reanimate this small evil by myself? People keep talking on russian forums about using tools like xPRG ... HEX/ MBN files... Miflash for Qualcomm... QPST software.. and stuff like this... but they are very general in explaning things... Help me!
Thanks!
Same problem here please help anyone
Mango Polo said:
Guys, the phone went into brick mode simply while charging. Please help me with links or ideas on how to find / create a debricking .zip or folder to flash this Qualcomm Snapdragon 400 - 8930AB device.
Why would a service get use of my money when I know it is possible to reanimate this small evil by myself? People keep talking on russian forums about using tools like xPRG ... HEX/ MBN files... Miflash for Qualcomm... QPST software.. and stuff like this... but they are very general in explaning things... Help me!
Thanks!
Click to expand...
Click to collapse
Take care
I hope this is not necroposting, but what do you mean for brick? Explain, is it hardware or software? And how is it going now?
L-K said:
I hope this is not necroposting, but what do you mean for brick? Explain, is it hardware or software? And how is it going now?
Click to expand...
Click to collapse
Necroposting at its finest, but i thought i would write here, so the thread creator might find something useful.
Here is my problem, samsung galaxy express 2 aka sm g3815, gone bricked while charging, i had custom recovery installed, although i do not seem to be able to remember the version, and root, flashed with Odin, everything worked perfectly for...almost a year, i guess. One day, my lil hero died. :crying: My computer seems to detect something plugged in, saying that it some QHUSB_DLOAD device. On some research I understood the Qualcomm reverted or switched to some sort of fail-safe state where it requires files to be written back in the device(correct me if im wrong). It`s been in deep coma for a few months now, everyone said "just buy a new phone and save yourself the hassle". Nope, my mind is set on repairing my hero. On other threads i found out it is possible to revive a phone in this state, using a class 10 or above microSD card and writing a debrick image. Problem was, i searched the seas of gold for the darn debrick image, none found. Until a few days ago, one of my workmates has a Galaxy Express 2, and said he can hand it to me so that i can copy what i need from it after the holidays. Both phones run on 4.4.2, his phone is all stock rom, no cwm or twrp, no root no nothing. It is coming in my hands in a few days. Does anyone have the patience to clearly write what must i do to get my hero working again? It`s been sucky here without it, currently stuck with a samsung Star 3 i reflashed myself, but that lil thing ain`t no Android. I have two class 10 microSD cards, one 8 Gb, one 16 Gb,with backup done, and i saw on other threads that i need to use the 8 gb one, since the phone`s internal was 8 gb. Anyway, sorry for the long novel, it`s my style tho, give as much info as you can so the people helping you know what they`re messing with haha feel free to ask for any extra information. If we ever meet, I`ll buy you a beer or two.....dozens
Cheers!
hi i bought this tablet few weeks ago and i have in my hands for around a week , i'm having some serious issues to use it because the rom basically sucks (continous crash of almost every app, sometimes it reboots by himself etc.)
i wanted to ask if other people have it and if they're facing the same issues , and the most important thing :if there is a twrp and a custom rom to replace this abomination
sorry for my bad english
I received this tablet a week ago and it just restarted once. Not that bad.
I just have another issue: battery charging. Just 3 days ago, I found that the i8 max couldn't be fully charged! Charging stopped at 83% even I plugged in for whole night. I will try the soft-reset tonight and see what happened.
Anyone having similar problem?
snufkin said:
I received this tablet a week ago and it just restarted once. Not that bad.
I just have another issue: battery charging. Just 3 days ago, I found that the i8 max couldn't be fully charged! Charging stopped at 83% even I plugged in for whole night. I will try the soft-reset tonight and see what happened.
Anyone having similar problem?
Click to expand...
Click to collapse
Tried using Power + Vol- but the device kept rebooting. Then pressing Power + Vol+ gave me a boot menu. I selected wipe cache and reboot again ...... no luck. The battery meter stayed at 86% after 8 hours of charging
Seems we need a better rom.
Finally i succesfully unlocked bootloader , flashed a twrp (starting with a xiaomi redmi note 4 twrp i make the porting to make it works on voyo)
And flashed superSU too
But the experience on this tablet still sucks
The firmware from voyo website is not able to flash with sp tools , or twrp so is useless .
If somebody successfully port or create an alternative rom for this tab let us know
antoniob91 said:
Finally i succesfully unlocked bootloader , flashed a twrp (starting with a xiaomi redmi note 4 twrp i make the porting to make it works on voyo)
And flashed superSU too
But the experience on this tablet still sucks
The firmware from voyo website is not able to flash with sp tools , or twrp so is useless .
If somebody successfully port or create an alternative rom for this tab let us know
Click to expand...
Click to collapse
If you could share instructions and files for bootloader unlock and root to the forum, that would be greatly appreciated. Cheers.
Now it's easier
For unlock bootloader you need to download mediatek drivers on Windows and activate usb debug and oem unlock bootloader (or similar) in dev option , from then open a powershell and use adb like other phones
For twrp , google "voyo i8 max twrp" guide and download link are there (i think it s not allowed to post external link)
For root download superSU and flash from twrp
If you need other infos , ask
Sorry for my bad english , it's difficult to write a guide in another language
antoniob91 said:
Now it's easier
For unlock bootloader you need to download mediatek drivers on Windows and activate usb debug and oem unlock bootloader (or similar) in dev option , from then open a powershell and use adb like other phones
For twrp , google "voyo i8 max twrp" guide and download link are there (i think it s not allowed to post external link)
For root download superSU and flash from twrp
If you need other infos , ask
Sorry for my bad english , it's difficult to write a guide in another language
Click to expand...
Click to collapse
Hi. Thanks. My difficulty is actually to find the TWRP file for the i8 Max. Googling it leads you to the GetDroidTips website which gives you a link to the twrp file that is on a Russian forum page. However the download link on that Russian forum page is dead. I tried to contact the writer of the article on GetDroidTips website, but he's not responding. All I want really is a valid download link to the twrp file. Everything else I should be able to do fine from there...
Could someone post the TWRP file someplace...
Once I can load TWRP and root I'll make a backup of the bare firmware and make it available.
antoniob91 said:
Finally i succesfully unlocked bootloader , flashed a twrp (starting with a xiaomi redmi note 4 twrp i make the porting to make it works on voyo)
And flashed superSU too
But the experience on this tablet still sucks
The firmware from voyo website is not able to flash with sp tools , or twrp so is useless .
If somebody successfully port or create an alternative rom for this tab let us know
Click to expand...
Click to collapse
Any chance you could post a link to the TWRP you used. The Russian site no longer has it
Need it too
hs4842 said:
Any chance you could post a link to the TWRP you used. The Russian site no longer has it
Click to expand...
Click to collapse
Hi,
Twrp for Voyo I8 Max
Can someone help please?
Hi all,
I follow Aditya Singh's article to port 3 twrp recoverys for Voyo i8 max.
Installing with SP Flash Tool, I can boot to each recovery of them.
You can choose one of them and I hope it works well on you pad.
* I'm not a pro. Thus, I may NOT provide help for your technical problems. I also NOT sure those recoverys won't damage your pad or data. If you have doubts about this, please do not download them.
Download link: (As a new guy, I can't post any link now. Open it by yourself)
drive.google.com/drive/folders/1DSPQWmFFQlDvPLZUKupo8TpU2dHTueYB
Note:
1. The original twrp recoverys are prepared for Xiaomi Redmi Note4_MTK by cofface and geoanto555.
2. Aditya Singh's article is "How to Port TWRP for MediaTek 64 bit MT67XX Devices!!"
Jacky Lan said:
Hi all,
I follow Aditya Singh's article to port 3 twrp recoverys for Voyo i8 max.
Installing with SP Flash Tool, I can boot to each recovery of them.
You can choose one of them and I hope it works well on you pad."
Click to expand...
Click to collapse
I have the i8 Plus framework file that Voyo has for an i8 reload image. I will try my hand at creating TWRP file and see how they differ. Really need to get my device rooted so I can get the CPU control optimised and to see just how much of the OS is faked by parms in the kernel.
Already had one Octa-Core pad that was actually a dual core hyped up. Lucky for me the guy was in the USA and filed for a refund on it. Only found out after I rooted it and reran tests to really see what was on the inside.
Even so, there are a lot of great reviews about my device. Perhaps I'll try my hand at porting Dirty Unicorn, Remix OS, or Android 8.x.
As is, I'll pay my review after I load the second SIM with my new number.
ADMINISTRATOR: Can we get our own forum group for our device?
Device: Voyo i8 Max
Device code: i8-max
Thanks
Hi bro,
Honestly, I don't figure out what you mean 'cause my English is poor. I guess you wanna find a method to root your i8 plus. I port a twrp for i8 plus with the same method I mentioned.
Again, I don't guarantee that this recovery will not damage your device. You MUST take risk by yourself.
Link: drive.google.com/file/d/1p3RZcLO73-jm1Xm5gdvBwUhoIGHiZFjX
By the way, what do you mean about "ADMINISTRATOR: Can we..."?
Note: twrp recovery comes from following link:
www androidiani com
/forum/modding-vernee-thor/506324-vernee-thor-mt6753-3gb-ram-16gb-flash-modding.html
hs4842 said:
I have the i8 Plus framework file that Voyo has for an i8 reload image. I will try my hand at creating TWRP file and see how they differ. Really need to get my device rooted so I can get the CPU control optimised and to see just how much of the OS is faked by parms in the kernel.
Already had one Octa-Core pad that was actually a dual core hyped up. Lucky for me the guy was in the USA and filed for a refund on it. Only found out after I rooted it and reran tests to really see what was on the inside.
Even so, there are a lot of great reviews about my device. Perhaps I'll try my hand at porting Dirty Unicorn, Remix OS, or Android 8.x.
As is, I'll pay my review after I load the second SIM with my new number.
ADMINISTRATOR: Can we get our own forum group for our device?
Device: Voyo i8 Max
Device code: i8-max
Thanks
Click to expand...
Click to collapse
Worked like magic
thanks a lot
Jacky Lan said:
Hi all,
I follow Aditya Singh's article to port 3 twrp recoverys for Voyo i8 max.
Installing with SP Flash Tool, I can boot to each recovery of them.
You can choose one of them and I hope it works well on you pad.
* I'm not a pro. Thus, I may NOT provide help for your technical problems. I also NOT sure those recoverys won't damage your pad or data. If you have doubts about this, please do not download them.
Download link: (As a new guy, I can't post any link now. Open it by yourself)
drive.google.com/drive/folders/1DSPQWmFFQlDvPLZUKupo8TpU2dHTueYB
Note:
1. The original twrp recoverys are prepared for Xiaomi Redmi Note4_MTK by cofface and geoanto555.
2. Aditya Singh's article is "How to Port TWRP for MediaTek 64 bit MT67XX Devices!!"
Click to expand...
Click to collapse
antoniob91 said:
The firmware from voyo website is not able to flash with sp tools , or twrp so is useless .
If somebody successfully port or create an alternative rom for this tab let us know
Click to expand...
Click to collapse
The file on the Voyo site is for the i8-Plus. I have sent repeated emails to "VoyoJack" and have received no response. I have another email address for him and I will try that way. I have recently tried to review the files and found that the framework is the wrong one. I think Voyo made a mistake in posting it - but it is possible that the same framework loads on both devices. Voyo has yet to confirm this.
The actual .img file is a SP Tools recovery image with scatter. (If you don't know what that means, look up how the SP Tools program works).
hs4842 said:
The framework file, while a .img extension, is actually a zip file with all the ADB pulls of the software. Which makes me think they slapped together something to appease folk like us. But it does contain the boot loader and the scatter files needed to make a working TWRP.
Click to expand...
Click to collapse
Actually the file is a scatter retrieved file that is an entire copy of the i8 Plus framework - that is loaded on i8 Plus and Max (not sure if loaded on PRO). The USA versions of the i8 Max have additional security measures to keep folks from modifying them. Although bootloader unlock programs for other Voyo products seem to work on this device as well.
The device may very well have fake IMEI numbers. The IMEI number does not pass validation. While they will work on most networks, they are still invalid IMEI numbers. Additionally, the serial numbers of these devices are 0123456789ABCDEF - which means they are common hack loads of Android on the device. Even though the device has great performance, the drawbacks of having them work on LTE networks, and overheating of the communications chip are common problems. The overheating causes the device to cut back on communications. Which pretty much sucks if you are trying to play an onlilne game with multiple users.
I have the Voyo i8 Max with two different carriers loaded. AT&T and T-Mobile respectively. It works. It does what I want it to do. However, the fact this has IMEI issues, is darn near almost impossible to root, and has a support system that sucks (zero communications and support from Voyo) should turn away users that are less daring.
Jacky Lan said:
Hi all,
I follow Aditya Singh's article to port 3 twrp recoverys for Voyo i8 max.
Installing with SP Flash Tool, I can boot to each recovery of them.
You can choose one of them and I hope it works well on you pad.
Download link: (As a new guy, I can't post any link now. Open it by yourself)
drive.google.com/drive/folders/1DSPQWmFFQlDvPLZUKupo8TpU2dHTueYB
Click to expand...
Click to collapse
I have confirmed that these files do in fact work. However: A word of caution. I had problems getting my device to boot after installing TWRP. It should be noted that you will have to unlock your boot loader (the Voyo Boot Loader Unlock program for other devices worked for mine too. The Fastboot commands are simple enough to run by hand get the job done). This will wipe your device and reboot.
Since Voyo is a Chinese company, the USA has restrictions on what the device has to employ for security. That includes a trusted, locked bootloader. Once you unlock it your device will display a warning that your device is no longer trusted, and give you a (long) 5 second delay before booting. This will also cause a number of Google services to see your device as not being in compliance.
Translation: You won't be able to watch Netflix on your device....but seriously - Who would want to?? Just load Showbox.apk on it, and Blokada (blokada.org) to kill the ads. (with regards to Blokada - do not load the Mother Of All Ads filter. It will crash blokada)
You must:
1. Install Super User app on your SD Card **BEFORE** you install TWRP. This is the program that cleans up some of the mess the TWRP install leaves behind.
2. Install TWRP via SP Tools. Be sure to backup your recovery.img file before you start (via SP Tools - learn how to use this app before you mess with it)
3. Clear Cache and Delvic cache.
4. Reboot back into Recovery mode
5. Install Super User app. This will clean up the device so you don't get stuck while booting.
At this point you can load and configure your device. Problem is you will not be able to enjoy anything other than GSM speeds (3G) until you fix your IMEI numbers.
***YOU WILL NEED TO DO THE FOLLOWING***
6. The IMEI numbers that ship with the Voyo i8 Max are invalid. Go online to site that has an IMEI Generator and generate a IMEI based on Samsung Galaxy LTE device of your choice. Record two of the numbers down (for SIM1 and SIM2). You'll need these in a moment.
Just be careful that the IMEI number you pick is not a duplicate of someone else's phone or you might get blocked.
7. Use the App Ghost Phone to set the new IMEI numbers. After you have set the numbers, shut your phone off for at least 10 minutes. This will let the network forget your device is 3G. After ten minutes turn your device on and if you have 4G LTE in your range, you will see the 4G icon and either another 4G icon, that means you only have 4G in your area for fastest speed, or 4G and LTE noted for LTE speeds.
After I done this I loaded Androoster and Root Booster to speed my device up even further. Bringing the look and feel of my phablet up to workstation level operations. Installed Viper for Android for added sound features and increase of volume (speaker is very weak on the tablet). Added VPN software, Anti-Virus, and Adaware for near ad free use. Although a lot of ads now are fed by the host server of the app and adware does not block those completely.
I have used my machine for almost two months now and really enjoy it. While the device does not have a GPS, Waze does a good job at ignoring this fact. Google Maps is useless on this device without a good Compass. There exists a kit project for a Bluetooth compass that is reported to work with this device.
Be careful of the type of Bluetooth headphones you choose. I have a mono-speaker Cobra trucker headset. It links well but nothing plays through it except phone calls. For generic mono with mic get a gaming bluetooth cheap headset. Or spend the money for Parrot Trucker headset. For Music, direct wire or find a good over-the-ear set that does Bluetooth very well. Found a $10 set on Wish that did the job so well I bought 2 (one for the Mrs.).
I'm still bugging Voyo for the I8 Max install firmware. The one they have is the i8 Plus SD dump. Doesn't work with our gear, but we can use it as a template for mods if necessary. Particularly with TWRP.
I hope this helps. Please click thanks and keep the good stuff rolling...
Need rom dump of I8 Max
Hello,
I'm new to the I8 Max and have had no joy with Voyo, who do not really seem interested in the foreign markets.
I am very interested in your post and I tried to flash the TWRP recovery but now my I8 Max will not work - it is bricked. I need a rom dump of the system from SP Flash Tool or WwR_MTK_2.40 so I can restore the entire firmware including bootloader. If anybody out there can help, it would be appreciated. MediaTek chips are very robust and as long as I can obtain the original firmware, I should be able to flash back to a working state using SP Flash tool. If someone has the correct firmware from the manufacturer, that would be a blessing. I appreciate any and all help offered.
silver-net-surfer said:
Hello,
I'm new to the I8 Max and have had no joy with Voyo, who do not really seem interested in the foreign markets.
I am very interested in your post and I tried to flash the TWRP recovery but now my I8 Max will not work - it is bricked. I need a rom dump of the system from SP Flash Tool or WwR_MTK_2.40 so I can restore the entire firmware including bootloader. If anybody out there can help, it would be appreciated. MediaTek chips are very robust and as long as I can obtain the original firmware, I should be able to flash back to a working state using SP Flash tool. If someone has the correct firmware from the manufacturer, that would be a blessing. I appreciate any and all help offered.
Click to expand...
Click to collapse
Following FWs are official released. (Replace '|' by '/' and '#' by '.')
Release at 20180223 from Chinese site https:||pan#baidu#com/s/1smg0knN
Release at 20180809 from English site https:||www#dropbox#com/sh/pk4ig0nu2d57oa0/AADFgYJRWA6QD8TP5WXCf4Nna?dl=0
Chinese site http:||www#myvoyo#com/xiazai/anzhou/i8%5FMax/down/
English site http:||en#myvoyo#com/xiazai/V%5Ftablets%5Fseries/i8%5FMax/down/
Hi guys. I just boarded the Voyo i8 max ship so lets see what else we find out.
Mine does have GPS. Google maps locks a location with hardware gps only. I don't use google location services and never will (in any of my devices).
No compass still. That's fine with me and I knew beforehand.
I think voyo does have interest in the overseas market as the device has keyboard and manuals in some kind of English but is not interested in having real customer support (as spected from a cheap China device). No suprises for me there.
Screen is a little unresponsive to touch probably because of the plastic screen protector or because of the 'palm rejection' from the pressure pen compatibility. I won't take the screen protector until the pen arrives... if it ever arrives (bought from Geekbuying).
Scroll is sluggish due to kernel tweaks or something but you can 'fix' it.
Awesome solution to the choppy scrolling: SuperTouch app from the play store. I'm amazed this really worked and no root needed to boot! Honesty don't know how that shlt works but it does. Set it to 500 smooth level because I didn't pay for the full app but damn, I might do as well because the recommended smooth level for this device's specs is more than triple! But you need to pay a few bucks.
Audio suck balls. Mono and as loud as a wishper. It almost makes the job done. I will try to hack the butt out of this device in a couple of monts and try to install real speakers and getting stereo might be a challenge depending of how stupid voyo 'engieneers' were.
Cameras are a joke (as spected).
Screen is nice (probably half the reason we bought this device) but spect bleeeding and quirks. Mine has shadow eyeliner at the right edge.
Keyboard is not worth buying unless at a discount or you really, really need a screen cover. I know I do. Plus point being bluetooth, bad point having the worse back shortcut ever. Home is esc, back is that mac flowr thingy + tiny ass backspace and recent apps...kinda shortcut is alt+tab. Alt+F4 is impossible to do with this keyboard.
The experience of the typing. Its usable, better than touch typing the screen while sitting on the desktop, but way worse than using swype, swiftkey or google board gliding. Still a pain because its like typing in a remote control.
It attaches to the device pretty poorly. It preffers to attach to the front of the device.
Unlike the voyo i8 pro this one has google play working out of the box.
Wifi is poor at medium range and unusable at long range. 2.4ghz. Haven't testet 5ghz.
4G is unavailable to me as my carriers only use B2 and B4 which this tablet doesn't support (haven't put a SIM yet but will in a couple weeks).
The pen... buttons don't work according to everyone. I can't tell, mine was never shipped.
That's all so far. I have had this device for almost an hour.
My friends given me a S9+ clone with some major issues so I figured rooting or reflashing ROM would fix those, but every single ROM I tried doesn't work and just some up with and error shown in an attached image. Phones currently soft bricked and won't turn on. From what I learned this is a firmware compatibility issue but the problem is I cannot find one compatible with this clone. I managed to snap a picture while the phone was still running, revealing the firmware details. It would be very helpful If theres anyone who could provide me a link with a possibly compatible firmware.
Flippy485 said:
My friends given me a S9+ clone with some major issues so I figured rooting or reflashing ROM would fix those, but every single ROM I tried doesn't work and just some up with and error shown in an attached image. Phones currently soft bricked and won't turn on. From what I learned this is a firmware compatibility issue but the problem is I cannot find one compatible with this clone. I managed to snap a picture while the phone was still running, revealing the firmware details. It would be very helpful If theres anyone who could provide me a link with a possibly compatible firmware.
Click to expand...
Click to collapse
Unfortunately you're probably out of luck, the best you probably could have done is just use the phone as it was. I had something similar, it was an S7 edge clone, also running a mediatek processor. If you're lucky you might find a Chinese forum with some firmware on it.
Edit: where did you get the firmwares that you tried flashing?
YrrchSebor said:
Unfortunately you're probably out of luck, the best you probably could have done is just use the phone as it was. I had something similar, it was an S7 edge clone, also running a mediatek processor. If you're lucky you might find a Chinese forum with some firmware on it.
Edit: where did you get the firmwares that you tried flashing?
Click to expand...
Click to collapse
Believe me I didn't want to mess with the phone that much but you couldn't download anything on it, even from the play store and calls were broken too. So this was meant to be the last chance for this guy. I got the firmwares from general googling. Here's the list of few I tried:
MT6580__alps__boway6580_weg_gm_l__boway6580_weg_gm_l__5.1__ALPS.L1.MP6.V2.19_BOWAY6580.WEG.GM.L_P8
MT6580__samsung__SM-G960U__hero2qltechn__7.0__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55
samsung s9+___MT6580__samsung__SM-G960F__dream2qltesq__7.0__alps-mp-m0.mp1-V2.34_hexing6580.we.m_P15
There's probably 3 more I tried and deleted.
Flippy485 said:
Believe me I didn't want to mess with the phone that much but you couldn't download anything on it, even from the play store and calls were broken too. So this was meant to be the last chance for this guy. I got the firmwares from general googling. Here's the list of few I tried:
MT6580__alps__boway6580_weg_gm_l__boway6580_weg_gm_l__5.1__ALPS.L1.MP6.V2.19_BOWAY6580.WEG.GM.L_P8
MT6580__samsung__SM-G960U__hero2qltechn__7.0__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55
samsung s9+___MT6580__samsung__SM-G960F__dream2qltesq__7.0__alps-mp-m0.mp1-V2.34_hexing6580.we.m_P15
There's probably 3 more I tried and deleted.
Click to expand...
Click to collapse
I see, wow. Good job trying anyway. Do you think it could have been an issue with lacking the radio bands to work with your carrier?
YrrchSebor said:
I see, wow. Good job trying anyway. Do you think it could have been an issue with lacking the radio bands to work with your carrier?
Click to expand...
Click to collapse
Actually no. I could hear the other person, but from thier side they could only hear static noise. I tested microphones and they worked so who know's what's the issue.
So after a lot of suffering I actually got further and I can now download stuff to the phone. One firmware in particular can be flashed but the "userdata" partition cannot I just get the "not enough space" error. I'm no expert but this partition may contain some crucial config files. So when I boot the phone I only see vertical lines. Right now I'm trying to modify the android scatter file but I feel like a child while doing this.
Flippy485 said:
So after a lot of suffering I actually got further and I can now download stuff to the phone. One firmware in particular can be flashed but the "userdata" partition cannot I just get the "not enough space" error. I'm no expert but this partition may contain some crucial config files. So when I boot the phone I only see vertical lines. Right now I'm trying to modify the android scatter file but I feel like a child while doing this.
Click to expand...
Click to collapse
Way to go! What is that phone flash tool you're using?
YrrchSebor said:
Way to go! What is that phone flash tool you're using?
Click to expand...
Click to collapse
SP Flash Tool for MTK devices.
Hello. I read your topic about the software, fake samsung s9 + clone. I have a very similar situation. My friend's parents gave it to me to do something and I tried flashtool to upload the same software and now the phone is dead. The computer detects this phone ... Do you have any suggestions on what you could do?
I had same problem and fixed it Just change the proloder
If u don't have prooader I have 10 prooader files for s9+ clone diffrent models
Just change proloaer
Then windows should show mtk proader vcom driver on device manager
I will uploads files when I go to work
mosirezaei said:
If u don't have prooader I have 10 prooader files for s9+ clone diffrent models
Just change proloaer
Then windows should show mtk proader vcom driver on device manager
I will uploads files when I go to work
Click to expand...
Click to collapse
hello I need those preloader files to save the phone
I suffer the same, if I can get information about it, how did it work?
Same problem with my same model of S9+ Clone
Dear
I have same model of Samsung Clone S9+ and also have same problem. I flashed my phone with wrong firmware and my phone has only white screen. i changed an other firmware then it totally dead and dont turn ON then I use an other then there are some vertical lines. Can you help me??
Do you find correct firmware for your phone?
Thanks
I know this is not going to help get your phones going.. But serious, if you do not want to experience these types of issue.. By all means do not a clone phone.. If you can not afford the real deal. Then buy something within your budget, or save up until you can purchase it...
cic108 said:
Same problem with my same model of S9+ Clone
Dear
I have same model of Samsung Clone S9+ and also have same problem. I flashed my phone with wrong firmware and my phone has only white screen. i changed an other firmware then it totally dead and dont turn ON then I use an other then there are some vertical lines. Can you help me??
Do you find correct firmware for your phone?
Thanks
Click to expand...
Click to collapse
MT6580_S9+ - Google Drive
drive.google.com
more than 12 firmwares
Try searching on needrom but most likely it will be paid firmware, good luck
kirichen said:
MT6580_S9+ - Google Drive
drive.google.com
more than 12 firmwares
Click to expand...
Click to collapse
here is the proloader files i uploaded on Gdrive
Dear Friends,
maybe you find this request stupid, but... My small daughter became an old crappy tablet as a gift. For YouTube an some movies was the machine OK, but was full with trash software and apps. I decided to re-flash the device with the latest possible and clean FW (the thing i do with every device...). The mentioned device is a cheap Polish license, Chinese made machine. Finding the right FW was absolutely not easy, but i found one exactly for this device. Regarding to the comments it was, but the reality was not. The flash went without problems via SP Flash Tool, but after that the device doesnt start-up. The PRELOADER was maybe from other model, or it was somewhere mismatch but the SP Flash Tool let me flash the device and bricked it -> DRAM ERROR 4032. Since this time, i try to download and flash tons of GBs of FWs, but without luck. Always DRAM error, chip or EMMC / NAND mismatch. I have never experinced troubles like this...
I have some information about the device, can you please assist me to restore to FW ?
Lark Evolution X2 7 3G-GPS
Android 4.2 or 4.4.2
MT6572
Thank you very much !
dwnldr said:
Dear Friends,
maybe you find this request stupid, but... My small daughter became an old crappy tablet as a gift. For YouTube an some movies was the machine OK, but was full with trash software and apps. I decided to re-flash the device with the latest possible and clean FW (the thing i do with every device...). The mentioned device is a cheap Polish license, Chinese made machine. Finding the right FW was absolutely not easy, but i found one exactly for this device. Regarding to the comments it was, but the reality was not. The flash went without problems via SP Flash Tool, but after that the device doesnt start-up. The PRELOADER was maybe from other model, or it was somewhere mismatch but the SP Flash Tool let me flash the device and bricked it -> DRAM ERROR 4032. Since this time, i try to download and flash tons of GBs of FWs, but without luck. Always DRAM error, chip or EMMC / NAND mismatch. I have never experinced troubles like this...
I have some information about the device, can you please assist me to restore to FW ?
Lark Evolution X2 7 3G-GPS
Android 4.2 or 4.4.2
MT6572
Thank you very much !
Click to expand...
Click to collapse
?
https://www.needrom.com/download/lark-evolution-x2-7-3g-gps-android-jelly-bean-4-4-2/
joke19 said:
?
https://www.needrom.com/download/lark-evolution-x2-7-3g-gps-android-jelly-bean-4-4-2/
Click to expand...
Click to collapse
Thank you very much for your response. That was exactly the first ROM which i used, and the ROM which bricked the device. In scatter file and in the description is mentioned MT6582 as chip. My opinion was, this is mistake, so i edited the the scatter file to MT6572 to match my needs. But as i wrote upper, it was something different...