I already try to erase everything from Orange Fox and also with TWRP, I am trying to install the MIUI EU ROM but when it is starting it throws me the problem of encryption
Next time, do not interrupt the encryption process, it will make DATA and INTERNAL STORAGE impossible to access. So you have to sacrifice your files in it.
Requrements:
TWRP Official (Don't use OrangeFox, might have some problems)
Flash TWRP via FASTBOOT
fastboot flash recovery [twrp name].img
Click to expand...
Click to collapse
Reboot to TWRP
Skip the Encrypted Data, even though you typed your password, it will never decrypt it.
Go to WIPE
FORMAT DATA
DO NOT REBOOT TO DEVICE, Reboot to Recovery
Go to WIPE
ADVANCE WIPE
Select "Internal Storage" then WIPE
Now, reboot the device
After booting, if you encountered that the devices says "Internal storage corrupted because of encryption yada yada"
Boot again to the recovery and go to Wipe, Advance Wipe. Select "DATA" and "INTERNAL STORAGE" then WIPE
Darklouis said:
Default Encrypted Data File System is EXT4 so changing it, it will remove the encryption.
Click to expand...
Click to collapse
But it is combined with loss of data in this partition?
Does this process just change the file system and keep the data?
rolex0815 said:
But it is combined with loss of data in this partition?
Does this process just change the file system and keep the data?
Click to expand...
Click to collapse
When changing the file system, it will induce self-clean wipe (includes DATA and INTERNAL STORAGE) and no data including files will be remained.
Darklouis said:
Next time, do not interrupt the encryption process, it will make DATA and INTERNAL STORAGE impossible to access. So you have to sacrifice your files in it.
Requrements:
TWRP Official (Don't use OrangeFox, might have some problems)
Flash TWRP via FASTBOOT
Reboot to TWRP
Skip the Encrypted Data, even though you typed your password, it will never decrypt it.
Go to WIPE
Go to ADVANCE WIPE
Select DATA only and click REPAIR/CHANGE FILE SYSTEM
Select F2FS and wait for the magic
Default Encrypted Data File System is EXT4 so changing it, it will remove the encryption.
Click to expand...
Click to collapse
Hi i did all steps as u say but twrp doesnt show any of my files
aref_sh said:
Hi i did all steps as u say but twrp doesnt show any of my files
Click to expand...
Click to collapse
Lol reread his post, the first paragraph
aref_sh said:
Hi i did all steps as u say but twrp doesnt show any of my files
Click to expand...
Click to collapse
Skip it. The only importance is to remove encryption and sacrifice all files in INTERNAL STORAGE and in DATA.
Darklouis said:
Next time, do not interrupt the encryption process, it will make DATA and INTERNAL STORAGE impossible to access. So you have to sacrifice your files in it.
Requrements:
TWRP Official (Don't use OrangeFox, might have some problems)
Flash TWRP via FASTBOOT
Reboot to TWRP
Skip the Encrypted Data, even though you typed your password, it will never decrypt it.
Go to WIPE
Go to ADVANCE WIPE
Select DATA only and click REPAIR/CHANGE FILE SYSTEM
Select F2FS and wait for the magic
Default Encrypted Data File System is EXT4 so changing it, it will remove the encryption.
Click to expand...
Click to collapse
Default Encrypted Data File System is EXT4 why change to F2FS
why no repair in ext4???
thork_sk8 said:
Default Encrypted Data File System is EXT4 why change to F2FS
why no repair in ext4???
Click to expand...
Click to collapse
You can repair it, but sometimes it wont work, that's why changing partition type will work then revert it back.
Works on Xiaomi mi max 3
Thanks, it works for me on my mi max 3, MIUI 11.0.06
If you are using or changing userdata to f2fs then you need to flash this on your phone I think
https://forum.xda-developers.com/poco-f1/how-to/enable-f2fs-userdata-cache-t3901077/amp/
VeteranoX said:
Thanks, it works for me on my mi max 3, MIUI 11.0.06
Click to expand...
Click to collapse
what u have done bro i got phone max3 encyrpted i format reboot format still not working..
Mi Max 3
princemeedo said:
what u have done bro i got phone max3 encyrpted i format reboot format still not working..
Click to expand...
Click to collapse
The mi Max 3 is very especial, if you have a Mi Max 3 you must use the this: https://forum.xda-developers.com/mi-max-3/development/official-orangefox-recovery-project-t3890821
If you don't have a Mi Max 3 you should look for an OrangeFox recovery for you phone.
VeteranoX said:
The mi Max 3 is very especial, if you have a Mi Max 3 you must use the this: https://forum.xda-developers.com/mi-max-3/development/official-orangefox-recovery-project-t3890821
If you don't have a Mi Max 3 you should look for an OrangeFox recovery for you phone.
Click to expand...
Click to collapse
Thanx sir i will try n inform u with result best regards...
Sent from my iPhone using Tapatalk
Hey guys I need some help..
I bought a new mi max3 which is on stock muiu 10
Here are my steps to flash globe rom
1. Unlock bootloader
2. Fastboot twrp to recovery
3. fastboot to boot twrp
4. Could not see any file in twrp
5. Reboot phone and return to stock recovery
6. (At this stage I don't get it why it back to stock recovery everytime. I wasted so much time searching and fastboot different version of twrp or moded twrp but still revert to stock after boot)
https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084
7. Then I came across a thread on orange fox for max3
8. I tried and viola, I can browse the file now
9. Came across a thread about eu miui rom, it said to fastboot format user data first before flash eu rom, but not System
https://forum.xda-developers.com/mi-max-3/how-to/rom-xiaomi-eu-miui-10-mi-max-3-t3825680
10. I fastboot format user data, wipe data cache internal storage then flash globe rom, which is based on eu miui, remove cache again
11. I boot up the phone successfully but it shows "Encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible." only button available oñ screen is reset phone
12. But no response after clicking it
13. Then I came to this thread
14. Tried wipe Data and internal storage and still no luck
(At this stage I am able to go in orange fox and fast boot mode)
15. I haven't tried changing file system to F2FS yet as I am afraid that will brick my phone
Suggested by this thread and this
https://xiaomi.eu/community/threads...ted-and-cant-be-completed-after-reboot.45640/
Could you guys give me some advice?
Many thanks in advance please
cyycolin said:
Hey guys I need some help..
I bought a new mi max3 which is on stock muiu 10
Here are my steps to flash globe rom
1. Unlock bootloader
2. Fastboot twrp to recovery
3. fastboot to boot twrp
4. Could not see any file in twrp
5. Reboot phone and return to stock recovery
6. (At this stage I don't get it why it back to stock recovery everytime. I wasted so much time searching and fastboot different version of twrp or moded twrp but still revert to stock after boot)
https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084
7. Then I came across a thread on orange fox for max3
8. I tried and viola, I can browse the file now
9. Came across a thread about eu miui rom, it said to fastboot format user data first before flash eu rom, but not System
https://forum.xda-developers.com/mi-max-3/how-to/rom-xiaomi-eu-miui-10-mi-max-3-t3825680
10. I fastboot format user data, wipe data cache internal storage then flash globe rom, which is based on eu miui, remove cache again
11. I boot up the phone successfully but it shows "Encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible." only button available oñ screen is reset phone
12. But no response after clicking it
13. Then I came to this thread
14. Tried wipe Data and internal storage and still no luck
(At this stage I am able to go in orange fox and fast boot mode)
15. I haven't tried changing file system to F2FS yet as I am afraid that will brick my phone
Suggested by this thread and this
https://xiaomi.eu/community/threads...ted-and-cant-be-completed-after-reboot.45640/
Could you guys give me some advice?
Many thanks in advance please
Click to expand...
Click to collapse
Try Fixing the partition through TWRP
gems.2000 said:
Try Fixing the partition through TWRP
Click to expand...
Click to collapse
i did manage to boot up the phone finally by format "data" and "internal storage" file system to f2fs.
Thanks for your help!
cyycolin said:
i did manage to boot up the phone finally by format "data" and "internal storage" file system to f2fs.
Thanks for your help!
Click to expand...
Click to collapse
Sure Man, anytime !
Related
Hello,
I have received a lenovo s856 td-lte quadcore snapdragon
the smartphone now facing encryption unsuccessful issue and requested to reset.
and i don't know if the device is on usb debug turned ON
things that i have done with the phone
i proceed to reset as requested, format userdata / cache - still resulted to encryption unsuccessful
i hard reset the phone (volume - + power button), format userdata / cache - still resulted to encryption unsuccessful
i reinstall the stock firmware, through hard reset the phone (volume - + power button), update by external sd - still resulted to encryption unsuccessful
i reinstall the stock firmware, using QFIL flasher, completely flashed - still resulted to encryption unsuccessful
p/s as advised to use TWRP fix -
tried to install TWRP with 15 SECONDS ADB INSTALLER following the detailed tutorial, and failed (the adb command not found error message appeared )
is there any other method to flash TWRP?
Do a custom recovery like twrp(recommended) and wipe all the partitions and install stock ROM again after that wipe with the recovery immediately after the flash then flash the phone again it will set things straight
Sent from my Cubotx9 using Tapatalk
Tali099 said:
Do a custom recovery like twrp(recommended) and wipe all the partitions and install stock ROM again after that wipe with the recovery immediately after the flash then flash the phone again it will set things straight
Sent from my Cubotx9 using Tapatalk
Click to expand...
Click to collapse
Is your internal storage or SD card data is encrypted. It maybe your Android can not read your data.
Ashwinrg said:
Is your internal storage or SD card data is encrypted. It maybe your Android can not read your data.
Click to expand...
Click to collapse
its internal sd
Ashwinrg said:
Is your internal storage or SD card data is encrypted. It maybe your Android can not read your data.
Click to expand...
Click to collapse
What I suggested should fix it
Sent from my Cubotx9 using Tapatalk
Tali099 said:
What I suggested should fix it
Sent from my Cubotx9 using Tapatalk
Click to expand...
Click to collapse
hi, i tried to TWRP with 15 SECONDS ADB INSTALLER following the detailed tutorial, and failed (the command not found error message appeared )
is there any other method to flash TWRP?
thanks for your previous replies.
octact said:
hi, i tried to TWRP with 15 SECONDS ADB INSTALLER following the detailed tutorial, and failed (the command not found error message appeared )
is there any other method to flash TWRP?
thanks for your previous replies.
Click to expand...
Click to collapse
Copy ADB and fastboot files to c:/windows/system32 folder. See your ADB and fastboot commands works.
Needed:
Unlocked Honor7x on emui 8 and twrp
I have tested this and found it working.
All you need to do is copy data/hw_init to your external sd
Then format data in twrp and flash the zip attached to this thread
Reboot
If it boots to system, then it's done
If it boots to erecovery and asks you to wipe data, then wipe data and boot to twrp
Make a data backup, format data, restore the back up you just made
Copy back hw_init from external sd to data
Reboot
Your device will be decrypted
more detailed instructions will follow
Sudeep Duhoon said:
Needed:
Unlocked Honor7x on emui 8 and twrp
I have tested this and found it working.
All you need to do is copy data/hw_init to your external sd
Then format data in twrp and flash the zip attached to this thread
Reboot
If it boots to system, then it's done
If it boots to erecovery and asks you to wipe data, then wipe data and boot to twrp
Make a data backup, format data, restore the back up you just made
Copy back hw_init from external sd to data
Reboot
Your device will be decrypted
more detailed instructions will follow
Click to expand...
Click to collapse
I did similar. I made almost same edits to fstab file in boot.img( removed verity, and "filencrypt") flashed modded boot.img and formatted /data. Phone boots normal, and twrp has full access to /data. But a side effect is developer options menu force closes when try to open it. Do you know why?
mrmazak said:
I did similar. I made almost same edits to fstab file in boot.img( removed verity, and "filencrypt") flashed modded boot.img and formatted /data. Phone boots normal, and twrp has full access to /data. But a side effect is developer options menu force closes when try to open it. Do you know why?
Click to expand...
Click to collapse
Can you post that boot.img? Or for emui 8 ramdisk or kernel img whichever is needed for oreo, this mod doesnt work for me
iGamer77z7 said:
Can you post that boot.img?
Click to expand...
Click to collapse
this is for emui 5 , android 7
It gave the trouble of crashing the settings app. so I did not continue using it.
USE AT YOUR OWN RISK.
copy the folder "/data/hw_init" before continuing.
Better way to apply this , instead of formatting in twrp, just factory reset in stock recovery. This way you do not wipe out the hw_init folder.
once done factory reset in stock recovery, plug in usb cable and select reboot from recovery screen. then hold volume down. Thais will reboot to fastboot.
Then "fastboot flash boot boot-decrypt.img"
mrmazak said:
this is for emui 5 , android 7
It gave the trouble of crashing the settings app. so I did not continue using it.
USE AT YOUR OWN RISK.
copy the folder "/data/hw_init" before continuing.
Better way to apply this , instead of formatting in twrp, just factory reset in stock recovery. This way you do not wipe out the hw_init folder.
once done factory reset in stock recovery, plug in usb cable and select reboot from recovery screen. then hold volume down. Thais will reboot to fastboot.
Then "fastboot flash boot boot-decrypt.img"
Click to expand...
Click to collapse
sorry I realized my mistake and edited my post, I was looking for an emui 8 solution, I'll keep trying unless you have an edited ramdisk or kernel img, not sure which one does force encrypt. Edit: Honestly I'm not on EMUI 8 currently, I am in the process of flashing gsi treble and wanted to decrpyt while my data was wiped.
EDIT: Got it, fastboot -w and factory reset in stock recovery did the trick along with flashing the included zip file
iGamer77z7 said:
sorry I realized my mistake and edited my post, I was looking for an emui 8 solution, I'll keep trying unless you have an edited ramdisk or kernel img, not sure which one does force encrypt. Edit: Honestly I'm not on EMUI 8 currently, I am in the process of flashing gsi treble and wanted to decrpyt while my data was wiped.
EDIT: Got it, fastboot -w and factory reset in stock recovery did the trick along with flashing the included zip file
Click to expand...
Click to collapse
How to backup data partition... please tell?
Okay ,so i was on miui9 and decided to flash miui10. I flashed it and restarted the phone, the boot up was talking too Long so I thought maybe the flash was not successful. And I rebooted into TWRP. But unfortunately it encrypted it. I got around it using default_password . But flash and wipes were not successful anymore. I couldn't Access internal storage too. I tried restarting and this time it said " encryption was interrupted, you can no longer access your data, format your phone to unlock... Etc"
Please tell me how i can backup or decrypt my phone's storage. Twrp , fastboot are still accessible. Please help I can't format the phone.
sssaini007 said:
Okay ,so i was on miui9 and decided to flash miui10. I flashed it and restarted the phone, the boot up was talking too Long so I thought maybe the flash was not successful. And I rebooted into TWRP. But unfortunately it encrypted it. I got around it using default_password . But flash and wipes were not successful anymore. I couldn't Access internal storage too. I tried restarting and this time it said " encryption was interrupted, you can no longer access your data, format your phone to unlock... Etc"
Please tell me how i can backup or decrypt my phone's storage. Twrp , fastboot are still accessible. Please help I can't format the phone.
Click to expand...
Click to collapse
Go to twrp -> wipe - > format data --> type yes to format .
naik2902 said:
Go to twrp -> wipe - > format data --> type yes to format .
Click to expand...
Click to collapse
I literally said , I can't format. Cause i don't want to lose my dats.
sssaini007 said:
I literally said , I can't format. Cause i don't want to lose my dats.
Click to expand...
Click to collapse
Ok.
naik2902 said:
Ok.
Click to expand...
Click to collapse
You have no other choice except going back to previous ROM. (connect to pc, mount usb storage allowes you to save your data like photos and stuff)
Sophia92 said:
You have no other choice except going back to previous ROM. (connect to pc, mount usb storage allowes you to save your data like photos and stuff)
Click to expand...
Click to collapse
I can't do that. I tried that but didn't work.
Also I was thinking maybe fastboot flash can fix ,but instead it looked the BL and removed TWRP and didn't even solve the problem.
I tried using mi unlocker to unlock but it Said "this account can't unlock this device"
sssaini007 said:
I can't do that. I tried that but didn't work.
Also I was thinking maybe fastboot flash can fix ,but instead it looked the BL and removed TWRP and didn't even solve the problem.
I tried using mi unlocker to unlock but it Said "this account can't unlock this device"
Click to expand...
Click to collapse
Forgot to mention: connect to pc while you are in recovery (trwp if possible). If you don't have this installed, search here in rn3 forum, for zcx twrp and flash this from fastboot mode.
Sophia92 said:
Forgot to mention: connect to pc while you are in recovery (trwp if possible). If you don't have this installed, search here in rn3 forum, for zcx twrp and flash this from fastboot mode.
Click to expand...
Click to collapse
Thank you so much
I will try to flash zcx recovery with fastboot, as i have BL locked too, i Will flash it by replacing the boot.img from miui rom .
And will try mounting usb From zcx twrp.
Btw, I did tried it once in previous official TWRP. Sd card and internal storage did showed up in pc ,but internal storage was inaccessible. Let's Hope zcx makes a difference.
Hello everyone, im kinda new here and i have a question:
How do i correctly root my phone? I know that ill still be able to get updates since its xiaomi, but i dont really know how to do it since i dont trust supersu and kingoroot, could you help me out?
If you need any technical info from my phone, just ask in the comments
install twrp 3.2.3 and magisk 17.2 files to your pc and flash twrp to your phone using adb. After u flashed twrp to your phone enter it and flash magisk file from sd card or flash drive with otg cable. (your data might be deleted)
Kaanarchy said:
install twrp 3.2.3 and magisk 17.2 files to your pc and flash twrp to your phone using adb. After u flashed twrp to your phone enter it and flash magisk file from sd card or flash drive with otg cable. (your data might be deleted)
Click to expand...
Click to collapse
umm, eh, i didnt understand a word you were saying after "flash twrp"
I did this. Coming from miui 10.0.4
- Restart in fastboot mode.
- Flash TWRP
- Enter recovery. Flash magisk. Maybe here u will got a problem with data partition... ( I have it.. my solution was using orange fox).
- After this u got your device rooted... Restart in system. Install magisk APK.
If you have that problem with the data partition...
Here in the forum there is a lot of info about that.
After you flashed twrp from adb via "fastboot flash recovery twrp.img" command; hold volume up + power on/off button until you see the teamwin title from your phone. So you must be in twrp now.. Your data will be crypted because using twrp for the first time. Go to wipe - format data, write "yes" and confirm. Reboot recovery by going to ‘Reboot’ -> ‘Recovery’. go to the ‘Mount’ menu. press the ‘Enable MTP’ button. Transfer Magisk 17.2 to your phone's internal storage (check other posts for guide, you will use adb sideload) or you can just move your magisk file to your sd card or your flash drive(you will need otg cable to connect flash drive to phone) . Return to menu, go to install, press magisk.zip and then swipe to flash it. When the installation is complete, press the ‘Wipe Cache/Dalvik’ button. And that's it now just reboot your system
foxmonter said:
I did this. Coming from miui 10.0.4
- Restart in fastboot mode.
- Flash TWRP
- Enter recovery. Flash magisk. Maybe here u will got a problem with data partition... ( I have it.. my solution was using orange fox).
- After this u got your device rooted... Restart in system. Install magisk APK.
If you have that problem with the data partition...
Here in the forum there is a lot of info about that.
Click to expand...
Click to collapse
I'm stuck on Orange Fox for hours now. In twrp there is a chance for loosing my data, so I am using orange fox. After unlocking the bootloader I flashed the Orange Fox recovery and while performing a nandroid backup, it shows me a error saying "error on uevent". But the nandroid backup finished and so I carried on with the process. Now I wiped my data, system and dalvik and normal cache. I clicked on install and on the ROM(arrow) and swiped right. The installation after sometime of progress abruptly ends giving Error 7. So I thought of Restoring back my nandroid backup and it did complete but with an error 255. Can you help me?
Yeshu_bablu said:
I'm stuck on Orange Fox for hours now. In twrp there is a chance for loosing my data, so I am using orange fox. After unlocking the bootloader I flashed the Orange Fox recovery and while performing a nandroid backup, it shows me a error saying "error on uevent". But the nandroid backup finished and so I carried on with the process. Now I wiped my data, system and dalvik and normal cache. I clicked on install and on the ROM(arrow) and swiped right. The installation after sometime of progress abruptly ends giving Error 7. So I thought of Restoring back my nandroid backup and it did complete but with an error 255. Can you help me?
Click to expand...
Click to collapse
All your answers are here: https://forum.xda-developers.com/showpost.php?p=76885728&postcount=3
PS: I hope you rebooted the recovery after doing all that wiping, and before doing anything else.
First of all I must apologize for my low level of English.
I will try to explain something strange that happens to my Pocophone since the arrival of the OTA with Android 10 and Miui11
Since I bought the Poco I have always used TWRP as recovery.
I currently use the 3.3.0.0 official TWRP version downloaded from its official app and I have no problem until the past weekend-
However, I have tried installing OrangeFox Recovery Project (OFRP), PitchBlack Recovery Project (PBRP) and an unofficial TWRP mod whose name is twrp-3.3.1-2-beryllium-adil2.img
And now I tell you I miss it.
If I boot into recovery using TWRP 3.3.0.0 it does not ask me for password, but if I flash OFRP, PBRP or mod 3.3.1.2 adil 2, it always asks me for a password when booting and tells me that the partition /data is encrypted. I do not know the password and I have never encrypted the Poco. Also the 3 revoveries show that is not installed any Tom, but when a reboot the system works perfectly.
Some colleagues have indicated to me that the data partition had been encrypted so I followed the next process to try to install a clean rom.
1. Boot in bootloader with Power + Vol-
2. Via fastboot flash OFRP
3. Boot in recovery (OFRP)
4. Format data and factory reset
5. Reboot recovery OFRP
6. Wipe: cache, Dalvik/Cache, Data and System partitions
7. Install rom XiaomiEU V11.0.4.0.QEJMIXM.zip
8. Flash DFE + Magisk
9. Reboot system
10. Complete ROM configuration
When I start again in recovery, it asks me for a password, informs me that data is encrypted and I cannot mount it, and I can't install anything.
However, if I flash TWRP 3.3.0.0 via fastboot, it no longer asks me for a password and I can mount the data partition and work normally.
If I flash again OFPR, PBRP or twrp-3.3.1-2-beryllium-adil2.img, ask me for a password again and it tells me that / data is encrypted
I tried to delete from /data/system the files locksettings.db, locksettings.db-shm and locksettings.db-wal but it continues asking me for a password if the recovery is always different of TWRP 3.3.0.0
otraver said:
First of all I must apologize for my low level of English.
I will try to explain something strange that happens to my Pocophone since the arrival of the OTA with Android 10 and Miui11
Since I bought the Poco I have always used TWRP as recovery.
I currently use the 3.3.0.0 official TWRP version downloaded from its official app and I have no problem until the past weekend-
However, I have tried installing OrangeFox Recovery Project (OFRP), PitchBlack Recovery Project (PBRP) and an unofficial TWRP mod whose name is twrp-3.3.1-2-beryllium-adil2.img
And now I tell you I miss it.
Click to expand...
Click to collapse
First off, your post belongs in the Q & A section. Please ask a moderator to move it as it has nothing to do with ROMs or development. Secondly, if official TWRP works, use it. Stop switching between recoveries and getting yourself all flustered.
PS: your English is fine. Don't sweat it.
Sent from my Galaxy Tab S5e using XDA Labs
Thank's for your answer.
guhvanoh said:
First off, your post belongs in the Q & A section. Please ask a moderator to move it as it has nothing to do with ROMs or development.
Click to expand...
Click to collapse
I don't know how conctact with the moderator. I'm a veteran user of the XDA-forums but I don't usually write frequently because my difficulty with the English language.
Secondly, if official TWRP works, use it. Stop switching between recoveries and getting yourself all flustered.
PS: your English is fine. Don't sweat it.
Click to expand...
Click to collapse
You're right. Here, in my country, we usually use this saying "if something works, don't touch it"
I wanted to try other recoveries because the official TWRP does not support USB-OTG access well.
About one year ago, I tried using a 256GB flashdrive with a m.2 ssd to perform a faster backup of the rom, but TWRP don't recognize the drive.
I read in these forums that TWRP had a problem managing USB-OTG and installed PBRP and it worked fine until last week I received the Miui11/Android10 OTA. After flashing it, PBRP started asking me for the password and displaying the message "I don't detect any rom installed". Despite having a recent backup (I always do it before flashing) I was a little scared.
I decided to reinstall TWRP by fastboot and I was surprised that the rom had been updated and everything worked ok.
As some colleagues tell me that I have the encrypted / data partition, I tried to make a format of the / data partition and new installation, with the result I commented above.
However, when I received the previous OTA, which was Android9 and Miui11, there was no problem.
I just wanted to share this strange situation.
I appreciate your message.
otraver said:
Thank's for your answer.
I don't know how conctact with the moderator. I'm a veteran user of the XDA-forums but I don't usually write frequently because my difficulty with the English language.
I appreciate your message.
Click to expand...
Click to collapse
Not a problem. If you view this in a web browser there is a button at the bottom left or right to report a post. Use that and ask for this thread to be moved.
PS: your English is still great.
Sent from my Galaxy Tab S5e using XDA Labs
otraver said:
First of all I must apologize for my low level of English.
I will try to explain something strange that happens to my Pocophone since the arrival of the OTA with Android 10 and Miui11
Since I bought the Poco I have always used TWRP as recovery.
I currently use the 3.3.0.0 official TWRP version downloaded from its official app and I have no problem until the past weekend-
However, I have tried installing OrangeFox Recovery Project (OFRP), PitchBlack Recovery Project (PBRP) and an unofficial TWRP mod whose name is twrp-3.3.1-2-beryllium-adil2.img
And now I tell you I miss it.
If I boot into recovery using TWRP 3.3.0.0 it does not ask me for password, but if I flash OFRP, PBRP or mod 3.3.1.2 adil 2, it always asks me for a password when booting and tells me that the partition /data is encrypted. I do not know the password and I have never encrypted the Poco. Also the 3 revoveries show that is not installed any Tom, but when a reboot the system works perfectly.
Some colleagues have indicated to me that the data partition had been encrypted so I followed the next process to try to install a clean rom.
1. Boot in bootloader with Power + Vol-
2. Via fastboot flash OFRP
3. Boot in recovery (OFRP)
4. Format data and factory reset
5. Reboot recovery OFRP
6. Wipe: cache, Dalvik/Cache, Data and System partitions
7. Install rom XiaomiEU V11.0.4.0.QEJMIXM.zip
8. Flash DFE + Magisk
9. Reboot system
10. Complete ROM configuration
When I start again in recovery, it asks me for a password, informs me that data is encrypted and I cannot mount it, and I can't install anything.
However, if I flash TWRP 3.3.0.0 via fastboot, it no longer asks me for a password and I can mount the data partition and work normally.
If I flash again OFPR, PBRP or twrp-3.3.1-2-beryllium-adil2.img, ask me for a password again and it tells me that / data is encrypted
I tried to delete from /data/system the files locksettings.db, locksettings.db-shm and locksettings.db-wal but it continues asking me for a password if the recovery is always different of TWRP 3.3.0.0
Click to expand...
Click to collapse
Hi bro I also facing same issue my problem is I m using orange fox recovery 10.0.1 version and when I flash miuiQ stable global with dfe it ask me to enter password when I boot to recovery don't know what happened. By the way is twrp official work perfectly????
---------- Post added at 04:07 PM ---------- Previous post was at 04:01 PM ----------
otraver said:
Thank's for your answer.
I don't know how conctact with the moderator. I'm a veteran user of the XDA-forums but I don't usually write frequently because my difficulty with the English language.
You're right. Here, in my country, we usually use this saying "if something works, don't touch it"
I wanted to try other recoveries because the official TWRP does not support USB-OTG access well.
About one year ago, I tried using a 256GB flashdrive with a m.2 ssd to perform a faster backup of the rom, but TWRP don't recognize the drive.
I read in these forums that TWRP had a problem managing USB-OTG and installed PBRP and it worked fine until last week I received the Miui11/Android10 OTA. After flashing it, PBRP started asking me for the password and displaying the message "I don't detect any rom installed". Despite having a recent backup (I always do it before flashing) I was a little scared.
I decided to reinstall TWRP by fastboot and I was surprised that the rom had been updated and everything worked ok.
As some colleagues tell me that I have the encrypted / data partition, I tried to make a format of the / data partition and new installation, with the result I commented above.
However, when I received the previous OTA, which was Android9 and Miui11, there was no problem.
I just wanted to share this strange situation.
I appreciate your message.
Click to expand...
Click to collapse
So bro twrp official never give encryption error if I flash miuiQ using it right ?
Hey there!
I have the same Situation here and I figured at least some points out:
- the Upgrade to Android 10 encrypted the data Partition. You can see that in in your phone settings under security and password. For some security reasons of Android Q I guess.
But what password and how to change is a mystery. There are tons of articles out there which are related to "encrypt with lock screen password" but thats something different. We have this Option too in developer settings but it is not Set. So the way of our New encrypted device is still a Secret.
- Official twrp is the only one to decrypt the data correct. If you go to the "save logs" section in twrp and save it you can see the log and it says that it decrypts with Standard password. But I wasnt able to find out that this is. And as I stated before we dont use the lockscreen password to decrypt, I tried to change and disable it but guess what... I didn't change anything.
I hope we can figure out as a community what's exactly going on here.
THE PASSWORD IS:
"default_password"
guhvanoh said:
Not a problem. If you view this in a web browser there is a button at the bottom left or right to report a post. Use that and ask for this thread to be moved.
Click to expand...
Click to collapse
Reported, thanks
sachin5555 said:
Hi bro I also facing same issue my problem is I m using orange fox recovery 10.0.1 version and when I flash miuiQ stable global with dfe it ask me to enter password when I boot to recovery don't know what happened. By the way is twrp official work perfectly????
Click to expand...
Click to collapse
I'm ussing the 3.3.0.0 and works perfectly...
So bro twrp official never give encryption error if I flash miuiQ using it right ?
Click to expand...
Click to collapse
In my case I have not had any problems.
I am currently using the global stable 11.0.4.0 QEJMIXM + TWRP 3.3.0.0 + Magisk 20.3
Fritzko said:
Hey there!
I have the same Situation here and I figured at least some points out:
- the Upgrade to Android 10 encrypted the data Partition. You can see that in in your phone settings under security and password. For some security reasons of Android Q I guess.
But what password and how to change is a mystery. There are tons of articles out there which are related to "encrypt with lock screen password" but thats something different. We have this Option too in developer settings but it is not Set. So the way of our New encrypted device is still a Secret.
Click to expand...
Click to collapse
I have checked what you say about ""encrypt with lock screen password" in developer settings and in my case it is disabled.
- Official twrp is the only one to decrypt the data correct. If you go to the "save logs" section in twrp and save it you can see the log and it says that it decrypts with Standard password. But I wasnt able to find out that this is. And as I stated before we dont use the lockscreen password to decrypt, I tried to change and disable it but guess what... I didn't change anything.
I hope we can figure out as a community what's exactly going on here.
Click to expand...
Click to collapse
Where can I find the logs you comment to check?
fraggy2 said:
THE PASSWORD IS:
"default_password"
Click to expand...
Click to collapse
Seriously?
I will not be able to try it until tomorrow. The motherboard of my PC has said that it doesn't work anymore and I am waiting for the arrival of a new one.
Where can I find the logs you comment to check?
Click to expand...
Click to collapse
Go to Twrp > advanced > copy logs. They are saved on your sd card.
fraggy2 said:
THE PASSWORD IS:
"default_password"
Click to expand...
Click to collapse
I tried wit "default_password" (without quotes) and don't work
Fritzko said:
Hey there!
- Official twrp is the only one to decrypt the data correct. If you go to the "save logs" section in twrp and save it you can see the log and it says that it decrypts with Standard password. But I wasnt able to find out that this is. And as I stated before we dont use the lockscreen password to decrypt, I tried to change and disable it but guess what... I didn't change anything.
Click to expand...
Click to collapse
I checked the TWRP logs and have you reason
Code:
I:Unmounting main partitions...
Successfully decrypted with default password.
I:Decrypt adopted storage starting
I:PageManager::LoadFileToBuffer loading filename: '/data/system/storage.xml' directly
I:successfully loaded storage.xml
Updating partition details...
I am using SHRP recovery for poco for 2 months now and I haven't faced any encryption problem (recovery asking for password). I would recommend you to try it buddy.
Champ16 said:
I am using SHRP recovery for poco for 2 months now and I haven't faced any encryption problem (recovery asking for password). I would recommend you to try it buddy.
Click to expand...
Click to collapse
If i flash it over twrp will it ask me to enter password?
sachin5555 said:
If i flash it over twrp will it ask me to enter password?
Click to expand...
Click to collapse
No
Champ16 said:
No
Click to expand...
Click to collapse
Done ! Thank u
Champ16 said:
I am using SHRP recovery for poco for 2 months now and I haven't faced any encryption problem (recovery asking for password). I would recommend you to try it buddy.
Click to expand...
Click to collapse
I don't think it works, but sure I will try it.
I have already tried everything I have been reading through many forums and I always get the same result.: the ****ing password
I have tried to deactivate the PIN, screen pattern, passwords, I have even logged off the Mi account and then I have tried to flash OFRP, PBRP and a TWRP mod and always, always ask me for password
I've tried booting on TWRP
1. Factory reset
2. Format data (not only wipe) (I answer "yes")
3. Reboot recovery
4. wipe cache, Dalvik / cache, Data and System
5 Install rom (miui_POCOF1Global_V11.0.4.0.QEJMIXM_74f88e6c8f_10.0.zip)
5. Flash twrp
6. Flash orange fox + DFE + magisk
7. Start rom and configure.
And without entering a PIN or blocking pattern, only gmail and Mi account and when returning to reboot in recovery it asks me again for a password.
SOLUTION:
I removed lockscreen password and flashed official TWRP.
Now it's decrypted successfully
The same kind of thing happened to me. I wish that I had seen this thread before. Lost all my data. ???
You can check it here
https://forum.xda-developers.com/poco-f1/help/miui-11-eu-android-10-encrypted-data-t4049421