After so many days of testing and more testing, and scared of losing IMEI, I was finally able to find a custom rom for my J6+ (J610G). (Not yet tested in other variants of J6+)
This custom, and the Resurrection Remix (RR) GSI based on Android 8.1.0 (Oreo). (Link to the original thread for more information)
Requirements:
Bootloader Unlocked (Option "OEM Unlock" checked in "Developer Options").
TWRP Recovery installed.
Memory Card with 1.5GB of space.
Very attention.
STEP BY STEP BELOW:
(WARNING: YOU WILL LOSE ALL YOUR HOME MEMORY DATA AND DO NOT RESPONSIBLE FOR DAMAGES CAUSED TO YOUR SMARTPHONE, DO AT YOUR OWN RISK!)
1. Download the rom, "system-181221-arm-aonly-gapps.img" from this link, and move the file to the memory card.
(THE NEXT STEP WILL DELETE ALL YOUR DATA)
2. Restart TWRP, tap: Wipe >> Format Data >> type "yes" and swipe!
3. Go back to the home screen, tap: Install >> Select storage >> Check "Micro SD Card >> (Go to the folder where you moved the downloaded system.img).
4. When you find the folder, tap: Install Image (All files with extension ".img" will appear) >> Tap the image you downloaded previously >> Check the "System image" and give "Swipe".
5. After installation, return to the initial screen and go to: Wipe >> Advanced Wipe >> Check "System" and touch "Repair or Change File System".
6. Touch "Repair File System" and "Swipe" after the repair, go back and touch "Resize File System" and give "Swipe". (CAUTION: If there are errors while performing this step, repeat it a second time).
7. After performing the previous step, install a root solution of your choice. (I recommend the Magisk 18.1)
8. After installing the root solution, return to the splash screen and tap: Reboot >> Recovery!
9. After the TWRP is started, configure it the way you prefer, and then go to: Reboot >> System.
10. Wait for the startup, after the startup is completed, put your language, do not connect to any wifi network and skip as many steps as you can.
11. When you get to the main ROM screen, if you do not have a navigation bar, see the next step, if you skip right to step 13.
12. Go to Settings >> Personalize >> Slide to "Navigation" >> and check "Allow navigation bar".
13. After all the above steps are followed, activate an Internet connection(Mobile or Wifi).
14. Try for a Google account, if you give a famous error of lack of certificate, do not worry as much as there is to solve! Click on this link and follow the steps.
(WARNING: You will receive numerous notifications from Google Play Services until there is an account added to your smartphone).
15. After 10min. of the above steps are performed, you can add an account and you can take advantage of all Google apps.
Working:
Telephone Calls;
Camera;
Wifi / Bluetooth;
SIMCARD(1) and 3G/4G/LTE;
Access to internal and external memory.
Flashlight;
Battery saving;
Etc.
Bugs:
USB MTP
SIMCARD(2) does not work.
Need help?
Any questions? Suggestion?
Or did you find any way to improve this post?
Leave your answer in the comment below !!
Telegram Group for all J6+ Users:
https://t.me/joinchat/G2bPvhSTIt-CDtYQyljKqA
Thanks to:
@Fersho by solution for post "uncertified devices".
@mracar by the build of RR 8.1.0 rom!
Reserved1
Reserved2
finally I will test thank you
RMM Forever
RMM state for more than 8 days.
Unlocked OEM and now waiting RMM
Tried date trick several times.
Tried MiracleBox, but it doesn't detect my phone in download mode.
Anything else i could try?
TeuzHd said:
RMM state for more than 8 days.
Unlocked OEM and now waiting RMM
Tried date trick several times.
Tried MiracleBox, but it doesn't detect my phone in download mode.
Anything else i could try?
Click to expand...
Click to collapse
Your phone is J6+?
[QUOTE=JulioManeiro
Hello. I have samsung j6 plus. I uploaded different GSI android 9 and do not want to download. usually after starting the system, it returns to TRWP. one rom GSI that got in RR this March. but the problem is with the google play certificate. any suggestions?
where can I find matching GSI 9 for samsung j6 plus J610 FN?
I've got everything from the beginning ... it's back in TWRP. I do not know what to do next. maybe some advice ??
I have j6 plus. j 610FN. Maybe that's why I can not download GSI
JulioManeiro said:
Your phone is J6+?
Click to expand...
Click to collapse
of course
how to put this GSI ??? I always return to TWRP after uploading ..
krystianjolek said:
how to put this GSI ??? I always return to TWRP after uploading ..
Click to expand...
Click to collapse
You have downloaded this img?
You smartphone is arm?
TeuzHd said:
of course
Click to expand...
Click to collapse
You have to format factory you phone.
And wait by 168hours.
And active your develop options.
krystianjolek said:
JulioManeiro
Hello. I have samsung j6 plus. I uploaded different GSI android 9 and do not want to download. usually after starting the system said:
To solve google play certificate, link for this its in post above.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
JulioManeiro said:
You have to format factory you phone.
And wait by 168hours.
And active your develop options.
Click to expand...
Click to collapse
Any problem if i activate it before? i mean, i have it activated now and i alredy have 10 days without any formating.
Now i'm trying to keep 7 days uptime, without turning the device off on university and everything
TeuzHd said:
Any problem if i activate it before? i mean, i have it activated now and i alredy have 10 days without any formating.
Now i'm trying to keep 7 days uptime, without turning the device off on university and everything
Click to expand...
Click to collapse
No problem, but you have formated data?
JulioManeiro said:
No problem, but you have formated data?
Click to expand...
Click to collapse
I had OEM unlocked, then it factory reseted and i forgot about RMM, so i logged in,, my rmm got locked.
After that i formated everything and cleared cache, and i'm waiting again now
TeuzHd said:
I had OEM unlocked, then it factory reseted and i forgot about RMM, so i logged in,, my rmm got locked.
After that i formated everything and cleared cache, and i'm waiting again now
Click to expand...
Click to collapse
Well, now all you have to do is wait, and this time do not forget the RMM.
More than 168 hours, no oem unlock button (oem is alredy unlocked, oem lock was off on download mode)
My RMM state is never going to be normal?
169 hours uptime
Current system info:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TeuzHd said:
More than 168 hours, no oem unlock button (oem is alredy unlocked, oem lock was off on download mode)
My RMM state is never going to be normal?
169 hours uptime
Current system info:
Click to expand...
Click to collapse
Go to download mode, and send photo for your download mode.
TeuzHd said:
Tried MiracleBox, but it doesn't detect my phone in download mode.
Anything else i could try?
Click to expand...
Click to collapse
How do u enter in download mode ?
Do U have black backround in download mode ?
U suppose to enter in download mode when phone is turned off, hold volume + and volume - together then connect usb cable, it will run download mode (with blue/green/mint background). then phone is detected in download mode.
Related
Team Win Recovery Project 3.1.1
Snapdragon ONLY.
In NO way it is compatible with Exynos variants including but not limited to International (F/FD), Korean (N), Exynos LDU (X) variants.
Note that this does NOT unlock your phone. You need to have an unlockable variant such as Chinese or HK to flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#include <std_disclaimer.h>
Special Notes:
1. DON'T FORGET TO TURN OFF REACTIVATION (Samsung Account) LOCK.
2. UNLOCK BL BEFORE FLASH.
3. KNOX will be tripped once you flashed custom binaries to your phone. (Your warranty WILL be voided.)
4. Samsung Pay, Samsung Firmware OTA (System Updates), Secure Folder and other features that require high-level security will NO LONGER once you flashed custom binaries. (You can flash custom ROMs to keep OS up to date.)
Download:
Galaxy S8 (dreamqlte - Snapdragon vaiants)
https://twrp.me/samsung/samsunggalaxys8qcom.html
Galaxy S8+ (dream2qlte - Snapdragon variants)
https://twrp.me/samsung/samsunggalaxys8plusqcom.html
Sources:
https://github.com/jesec
Changelog:
Check #2.
Guide:
Check #3.
Official Telegram Group: - General Discussion
Join to get quick support (when you find my guide confusing or meet any unexpected problem).
You can also discuss about ROMs(this group is "neutral" so you can discuss about or review any ROM. Note: Devs: Do NOT aggressively advertise your work.), get latest updates from developers or report possible bugs.
Invite Link
Show your appreciation:
Click Thanks!, Rate 5-star or/and Donate to me.
XDA:DevDB Information
TWRP for Galaxy S8 and S8+ (Snapdragon), Tool/Utility for the Samsung Galaxy S8
Contributors
jesec
Source Code: https://github.com/jesec
Version Information
Status: Stable
Created 2017-07-14
Last Updated 2018-06-20
Changelog:
July 25:
1. More additional security functions implemented by Samsung have been disabled. (those functions may lead to potential I/O issues)
2. A fatal mistake that leads to incompatibility with plus variant has been fixed.
July 15:
Initial Release
Guides:
Notice: It may wipe all your data including those in internal storage.
Pre - HOW-TO PREPARE FOR FLASH: (Chinese/HK variants)
SPECIAL NOTE: These variants do NOT have "OEM Unlock" option and you don't need to enable it. Only reactivation (Samsung Account) lock needs to be disabled.
1. On your phone, open Settings, go to "Cloud and Accounts" -> "Accounts".
2. Select your Samsung account, open menu, remove account. (That will make sure reactivation lock is disabled. Alternatively you can disable reactivation lock without delete your Samsung account. Result should be same. )
3. Download, install and run official unlock tool, CROM service.
4. Your phone is unlocked and ready to flash TWRP at this stage. Now you can proceed to part 1.
Part 1 - HOW-TO FLASH TWRP:
1. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
2. Download and extract Odin (Samsung's Flash Tool) to your computer.
3. Download a .tar image of TWRP.
4. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
5. Open Odin and place that TWRP tar file in the [AP] slot.
6. Connect your phone.
7. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
8. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
AT THIS STEP YOU CAN DIRECTLY GO TO PART 3 OF THIS GUIDE IF YOU WANT TO ROOT.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs, Kernels via TWRP.
Part 3 - HOW-TO ROOT:
Note: Additional security layers implemented by Samsung make it impossible to get root access with a modified stock kernel. Thus, a custom kernel with security features disabled is MANDATORY.
1. Download a custom kernel with security features disabled.
- Reference: https://forum.xda-developers.com/galaxy-s8/samsung-galaxy-s8--s8-cross-device-development/kernel-jesse-s-kernel-galaxy-s8-s8-t3637640
1. Download the root package.
- Option 1: Magisk
- Option 2: SuperSU (untested)
2. Transfer the zips to your phone.
3. Flash the kernel.
4. Flash the root package.
how does this even work?
unitz0mbie said:
how does this even work?
Click to expand...
Click to collapse
You never heard about Jesec, the mighty one?
diazepambr said:
You never heard about Jesec, the mighty one?
Click to expand...
Click to collapse
i have seen the name before but never realized the power of a God among earth
Jesse is like the Matrix he only see's code format :laugh:
Amazing work!
Is this legitimate?
Anyone tried flashing it yet? Will it work without an unlocked bootloader?
I thought bootloader was locked?
Sent from my SM-G955U using Tapatalk
GHolbrook4 said:
Anyone tried flashing it yet? Will it work without an unlocked bootloader?
Click to expand...
Click to collapse
Prob not, I figured I would try anyway just to be 100% Certain does not flash through Odin and Fastboot OFC Doesnt ever connect to device since locked bootloader... Pretty sure it was uploaded for once the SD Version has Bootloader access
---------- Post added at 06:04 PM ---------- Previous post was at 06:03 PM ----------
lilrich17892 said:
I thought bootloader was locked?
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
It is
It's for the version with snapdragon and boot loader unlocked, i.e. China.
NeedleGames said:
It's for the version with snapdragon and boot loader unlocked, i.e. China.
Click to expand...
Click to collapse
China has SD?!?! Thought it was Exynos
GHolbrook4 said:
Anyone tried flashing it yet? Will it work without an unlocked bootloader?
Click to expand...
Click to collapse
Nope. SW REV CHECK FAIL : [recovery] Fused 1 > Binary 0 is the error on locked Bootloader
Does audio mods work for you guys?
Does this mean that it works with S8s on T-Mobile?
explorer-10 said:
Does this mean that it works with S8s on T-Mobile?
Click to expand...
Click to collapse
No, only for the Chinese Snapdragon phones. You can't root a s8 in the US because no one s figured out how to unlock the bootloader yet.
GHolbrook4 said:
No, only for the Chinese Snapdragon phones. You can't root a s8 in the US because no one s figured out how to unlock the bootloader yet.
Click to expand...
Click to collapse
well, damn. i wish it would say that in the headline on my Google feed instead of getting my hopes up. its like almost getting me there and then stopping right before i can finish on her face
NeedleGames said:
It's for the version with snapdragon and boot loader unlocked, i.e. China.
Click to expand...
Click to collapse
Also lock in China.
Team Win Recovery Project 3.1.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Exynos ONLY.
In NO way it is compatible with Snapdragon variants including but not limited to American(U/A/T/P/V), Chinese(0/8/6), Hong Kong(0), Japanese(SC-*), Canadian(W) variants.
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
Download: greatlte (Exynos variants - N950F/FD/X/N)
https://drive.google.com/file/d/0B7EuVd0yZ8ErSE5EQW12TVEtcVk/view?usp=sharing
Sources:
https://github.com/TeamWin
https://github.com/geiti94/android_device_samsung_greatlte
https://github.com/geiti94/android_kernel_samsung_universal8895_greatlte
Changelog:
Check #2.
Guide:
Check #3.
Bugs:
-A mouse pointer shows on display
XDA:DevDB Information
[RECOVERY]TWRP for Galaxy Note 8 (Exynos), Kernel for the Samsung Galaxy Note 8
Contributors
geiti94, @jesec for the S8+ TWRP tree i used as base
Kernel Special Features:
Version Information
Status: Beta
Created 2017-09-16
Last Updated 2017-09-21
Changelog:
Sep.21
Removed Mouse cursor. thx alot to @Tkkg1994 that joined now us too on n8
Added F2FS Support
Sep.17
Fixed MTP
Fixed ADB
Sep. 16:
Initial Release
Guides:
Notice: It may wipe all your data including those in internal storage.
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.) (for the moment not working)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/". (for the moment not working)
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU (untested)
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.
Omg I'm gonna die happy lol. Let me go and root now.
Sent from my SM-N950N using XDA-Developers Legacy app
Good work keep it up
This is great. Many thanks
Great job and many thanks for your efforts!
Do I get this right?
When I'm in download mode, I have to hold the 3 buttons again and press start in odin ?
Doesn't that interrupt the flash process ?
Pinu'u said:
Do I get this right?
When I'm in download mode, I have to hold the 3 buttons again and press start in odin ?
Doesn't that interrupt the flash process ?
Click to expand...
Click to collapse
No go To Download Mode in The smartphone and Then .via Odin Select AP and The Recovery IMG Then Flash ans Phone Reboot automaticly
Oh yeah baby
Thanks time to de bloats and install my favorite apps
Sent from my SM-N950N using XDA-Developers Legacy app
Thanks a lot TWRP up and rocking. Great work !!
Edit : Can confirm that SuperSU v2.82 is working also !!
Anybody know if this will also work with N950F/DS model? Thanks.
xpdragon said:
Anybody know if this will also work with N950F/DS model? Thanks.
Click to expand...
Click to collapse
Works since i have it byself is the dual sim one right? when yes is same modell as mine
Mine don't have oem unlock options in developers mode. Need to wait for sw update or other opinion. ??
Sent from my SM-N950F using Tapatalk
geiti94 said:
Works since i have it byself is the dual sim one right? when yes is same modell as mine
Click to expand...
Click to collapse
Yes, it is dual sim model. Thanks for the reply.
your fantastic!!! one day without root and twrp!! im so happy now ^^. now i can continue with modding on my new great phone.
Finish work and lets go home flashing
Was just about to port it by myself and then I saw Your thread . Great Job Geiti! Guess I will take care of building AOSP for N950F then .
pswin09 said:
Mine don't have oem unlock options in developers mode. Need to wait for sw update or other opinion.
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
There's no guarantee a software update will ever unlock your bootloader if the OEM Unlock option is not available for you. I would suggest selling it and buying a new one that does have the option. If you really want to root or install custom ROMs, why take the risk when you spent $1000 on this phone for a specific purpose?
If you just bought your phone, it must still be brand new and in pristine condition. You should sell it for almost full price. The demand is really high right now so you'll have no problems selling it fast.
pswin09 said:
Mine don't have oem unlock options in developers mode. Need to wait for sw update or other opinion.
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
can be your carrier blocked the oem unlock. download a debranded firmware like the one with AUT or DBT csc and flash it with odin and look if you have then the menu. But flash it only when you have a N950F or a N950F/DS
Has anyone tested Android Pay after doing this?
This is the stock Rom of N & M for Yoga Book LTE & WIFI for the needers
if any dev want to help me developing a dual boot for Yoga Book, just PM me or join Telegram Group for Yoga Book devs and users:
MOD EDIT: LINK REMOVED
Prees the Thanks button if that helps you
How to install it:
Be careful, these steps will erase all your data on tablet and will downgrade rom (stock marshmallow)
First of all: read and understand all of the instructions.
1. Download the stock ROM
https://cloud.kolyandex.su/index.php/s/4WDt6ghOzHAyP4s (Nougat WiFi version)
https://easy-firmware.com/home/browse/category/id/19521/ (Marshmallo LTE version)
https://androidfilehost.com/?fid=817550096634799507 (Marshmallo WiFi version)
2. Extract it to some folder
3. Download Intel Platform Tool Lite from here: https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
4. Install Intel Platform Tool Lite
4. Boot into fastboot mode
5. Run Intel Platform Tool Lite
6. Make sure your tablet is recognized by the tool (otherwise you need to enable USB-debug in Developer settings)
7. Select "flash_update_from_eng.json" from folder in (2)
8. Push "start to flash"
9. Wait... (You should check tablet's screen in order to lock/unlock bootloader (it should be locked after flash in order to install OTA updates))
10. Reboot tablet
11. Your keyboard might not work: that is normal (just use on-screen keyboard for now)
12. After initial setup: open Contacts app, create new one (if there are no contacts yet), tap search and enter ####6020#
13. Choose your region
14. Reboot
15. Setup again (now halo should work)
16. Go into settings -> about -> updates and update till the last version (may take several hours)
17. Say thanks for alexjustes for his Amazing Steps
Thank you so much for posting this!
Have you tried flashing this through @danjac's TWRP build? I know trying to restore any nandroid backup made after the OTA upgrade to Nougat results in a boot loop.
beltani said:
Thank you so much for posting this!
Have you tried flashing this through @danjac's TWRP build? I know trying to restore any nandroid backup made after the OTA upgrade to Nougat results in a boot loop.
Click to expand...
Click to collapse
Unfort. no, because i dont have a YB Android Version, i have win ver.
THE MAXIMUM POWER said:
Unfort. no, because i dont have a YB Android Version, i have win ver.
Click to expand...
Click to collapse
I'm 99% sure this isn't flashable in custom recovery, at least without some modification and repackaging. It's a package designed for Intel Phone Flash Tools.
Still a huge asset, though, so thanks again!
beltani said:
I'm 99% sure this isn't flashable in custom recovery, at least without some modification and repackaging. It's a package designed for Intel Phone Flash Tools.
Still a huge asset, though, so thanks again!
Click to expand...
Click to collapse
Same, it can only flashed through fastboot mode
I got myself into quite the pickle today. I've been considering selling my Yogabook to switch to a Chromebook 2-in-1. I wanted to get the device back to as full vanilla as possible. I "thought" the first step was to lock the bootloader again and then do a full factory reset, apparently not... After booting back up from locking the bootloader I kept getting an Intel "bootloader error code 01" and Android would not start. It would take me to fastboot mode on it's own but I was unable to use the power button to make a selection and the device would just power off after 5 minutes. Thankfully from there or fore powering off I could hold Volume up on startup and get to fastboot manually or recovery. It being in a locked state now though I couldn't do much of anything else, no flashing anything other than loader, no format, no erase, and TWRP was not able to be booted.
Anyway I finally read a post about DNX mode and how to get to it, but nothing on how to really use it or any decent information imho. After finally finding some users on another part of the forum discussing a DNX flashing tool made for their devices HTC I went searching for a tool for the Lenovo. Lenovo has nothing for this (shame on you Lenovo!) but Intel does have it and it can be used with the recovery image posted above in this thread (and I assume all the others running around). And here is the URL for the tool
https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
You just have to load a valid JSON file containing the proper config information for the ROM you are flashing iwithin the Intel tool. For this particular version of the ROM I did have to modify the "flash_recover_dnx.json" file to remove this section
Code:
{
"duration" : 5000,
"restrict" : null,
"tool" : "sleep"
},
Otherwise the flash tool would not load it due to the a bad tool from this JSON config named "tool". No other changes to the settings of the Intel flashing tool were needed.
Just click "Start to Flash" and once it was done all was well. Took a little over five minutes, it unlocked, flashed, and locked the device again itself.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No more Intel error stating the device isn't secure every reboot. I did lose all my data that was on it doing this but I wasn't worried about that going into it.
After initial setup in Android I did have to do the trick noted here to get the Halo keyboard working again which then required initial setup once more.
Hope this helps others.
@MarkAllen, thank you for your valuable information. This will help people unbrick their devices.
MarkAllen said:
I got myself into quite the pickle today. I've been considering selling my Yogabook to switch to a Chromebook 2-in-1. I wanted to get the device back to as full vanilla as possible. I "thought" the first step was to lock the bootloader again and then do a full factory reset, apparently not... After booting back up from locking the bootloader I kept getting an Intel "bootloader error code 01" and Android would not start. It would take me to fastboot mode on it's own but I was unable to use the power button to make a selection and the device would just power off after 5 minutes. Thankfully from there or fore powering off I could hold Volume up on startup and get to fastboot manually or recovery. It being in a locked state now though I couldn't do much of anything else, no flashing anything other than loader, no format, no erase, and TWRP was not able to be booted.
Anyway I finally read a post about DNX mode and how to get to it, but nothing on how to really use it or any decent information imho. After finally finding some users on another part of the forum discussing a DNX flashing tool made for their devices HTC I went searching for a tool for the Lenovo. Lenovo has nothing for this (shame on you Lenovo!) but Intel does have it and it can be used with the recovery image posted above in this thread (and I assume all the others running around). And here is the URL for the tool
https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
You just have to load a valid JSON file containing the proper config information for the ROM you are flashing iwithin the Intel tool. For this particular version of the ROM I did have to modify the "flash_recover_dnx.json" file to remove this section
Code:
{
"duration" : 5000,
"restrict" : null,
"tool" : "sleep"
},
Otherwise the flash tool would not load it due to the a bad tool from this JSON config named "tool". No other changes to the settings of the Intel flashing tool were needed.
Just click "Start to Flash" and once it was done all was well. Took a little over five minutes, it unlocked, flashed, and locked the device again itself.
No more Intel error stating the device isn't secure every reboot. I did lose all my data that was on it doing this but I wasn't worried about that going into it.
After initial setup in Android I did have to do the trick noted here to get the Halo keyboard working again which then required initial setup once more.
Hope this helps others.
Click to expand...
Click to collapse
Thank You for the INFOS
The tool does not recognized my device
Please help to flash my yoga book.
Got these with the stock .json file as described above:
06/18/18 12:00:01.188 ERROR : No description value in command sleep
06/18/18 12:00:01.188 ERROR : Cannot create command with tool "sleep"
06/18/18 12:00:01.188 ERROR : Tool sleep not found or invalid tool configuration
Opened that file in notepad and deleted the sleep section - started flashing.
The usb drivers are definitely required, I lost the connection because they weren't loaded. I installed them and refreshed device manager and she started receiving the flash.
Used Win7 to flash also, the intel page says its not supported.
Flash success and locked bootloader after entering the country code - thanks very much all!
jeitana said:
Please help to flash my yoga book.
Click to expand...
Click to collapse
Try installing Android SDK drivers in you PC
Guys, if anyone faced a Probleme during his way to flash the ROM, PLZ tell me the problems with More Details
_Deeb0_ said:
Got these with the stock .json file as described above:
06/18/18 12:00:01.188 ERROR : No description value in command sleep
06/18/18 12:00:01.188 ERROR : Cannot create command with tool "sleep"
06/18/18 12:00:01.188 ERROR : Tool sleep not found or invalid tool configuration
Opened that file in notepad and deleted the sleep section - started flashing.
The usb drivers are definitely required, I lost the connection because they weren't loaded. I installed them and refreshed device manager and she started receiving the flash.
Used Win7 to flash also, the intel page says its not supported.
Flash success and locked bootloader after entering the country code - thanks very much all!
Click to expand...
Click to collapse
Is this compatible with the Yoga Book A12?
I have been away for a while. Why should I want to install this rom?
Ok I wanted to reset this tablet because the SystemUI ap was using %25 of the cpu constantly, I do not know when and hopw this piece of **** got to that level of crappy update, must be some google crap
- Can I unlock the OEM bootloader?
- Can I still use the twrp->Magisk method to root this?
thanks
Shawnki91 said:
Is this compatible with the Yoga Book A12?
Click to expand...
Click to collapse
Sorry but no
hajkan said:
I have been away for a while. Why should I want to install this rom?
Click to expand...
Click to collapse
No Need to reinstall this Rom if you have already your System, both are 100 % same
hajkan said:
Ok I wanted to reset this tablet because the SystemUI ap was using %25 of the cpu constantly, I do not know when and hopw this piece of **** got to that level of crappy update, must be some google crap
- Can I unlock the OEM bootloader?
- Can I still use the twrp->Magisk method to root this?
thanks
Click to expand...
Click to collapse
Reinstall the Rom will fix this, but doing factory reset will fix this too
In case anyone wants the wifi only M firmware here it is https://androidfilehost.com/?fid=817550096634799507
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- = Treble Zoom = -
This custom ROM based on Havoc-OS 3.5.
Prerequisites - bootloader must be unlocked, clean Stock firmware and TWRP must be installed.
What's done:
- integrated GAPPS (Play Market, Chrome, Google Dialer, Messages, Contacts, etc.), but nothing extra. YouTube has been removed because I use YouTube Vanced);
- installed Nova Launcher (I recommend using it as the main one), RootExplorer, Asus File Manager (for simple tasks), Asus Gallery, AdAway ads blocker, Motor Command Center 2;
- integrated Moto camera from the latest firmware draining. Fully working with the work of all camera modules! In addition the best, in my opinion, for this ROM and our phone Google Camera mod;
- working Adaptive Brightness;
- cleaned up and made the system a little bit easier.
Installation Instruction
1. Download the Project Treble system image archive. Unpack the archive and copy the ROM image to an external SDCard.
2. Copy to external SD Card Magisk Installer https://github.com/topjohnwu/Magisk (latest version for today Magisk v20.4), Disable_Dm-Verity_ForceEncrypt https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389 (latest version for today Disable_Dm-Verity_ForceEncrypt_03.04.2020 https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip ) and Permissiver_v4 (see attachments)
3. Reboot in TWRP and go to the "Wipe" tab, "Advanced Wipe" and select Dalvik, System, Data, and then go back two steps back and do a "Swipe Factory reset".
4. Install the Treble Zoom system image. In the "Install" tab in the lower right corner click "Install image" and select ROM Image. A window will open in which you should select partition "System Image" in which the image where to be installed. Swipe for confirm flash.
5. When the installation is complete, go to "Wipe" and perform a "Format Data".
6. Install the Magisk.zip, Disable_Dm-V_ForceEncrypt.zip and Permissiver_v4.zip. Reboot into the system and make the settings, use the Project Treble working system.
The first launch will be a bit long, don't worry and be happy!
Noticed problems on Treble Zoom - Does not pass SafetyNet check (ctsProfile: false; basicIntegrity: true). On Google Play, your device is not certified, but applications are installed and updated. Wired headphones are plugged in. When connected, the Bluetooth headset in the Dialer application works, but when listening to audio, video, YouTube is not.
Fingerprint Unlocking by fingerprint is implemented for scanners on the back of the phone. This problem can be corrected in the following way:
Connect the device to your PC and enter the following commands
Code:
adb shell
su
setprop persist.sys.fp.fod.location.X_Y 450,1760
setprop persist.sys.fp.fod.size.width_height 194,194
reboot
A green circle will appear in the display of your device, which is responsible for your fingerprint.
Niiiiice!!! I will try it ?
It Is Android 10?? You have some screenshot??
Does the fingerprint under the display work with this ROM?
Honzule89 said:
It Is Android 10?? You have some screenshot??
Click to expand...
Click to collapse
Yes, it's Android 10.
No screenshots. It's like Andriod 10.
Honzule89 said:
Does the fingerprint under the display work with this ROM?
Click to expand...
Click to collapse
Unlocking by fingerprint is implemented for scanners on the back of the phone.
Moto Zoom has a fingerprint under the display, which means that this reader will be inoperative and the phone can only be unlocked with a gesture or pin. It is a great pity. I will not install this ROM. But still great work
Honzule89 said:
Moto Zoom has a fingerprint under the display, which means that this reader will be inoperative and the phone can only be unlocked with a gesture or pin. It is a great pity.
Click to expand...
Click to collapse
This is GSI. This is a basic image of the firmware, not for a concrete model. Are you ready to donate for Moto Oe Zoom specific firmware development?
Honzule89 said:
I will not install this ROM.
Click to expand...
Click to collapse
The choice is yours. No one is forcing anyone. It's just that up until now it hasn't been possible to get a working system on Android 10.
After the flashes I get this:
Failed to mount '/system's (Invalid argument)
After I unpack the image zip, I rename to .img, maybe that's why, help me please...
ilia3367 said:
Yes, it's Android 10.
No screenshots. It's like Andriod 10.
Click to expand...
Click to collapse
You're truly incredible, thank-you SOOOOOO much for your work. :laugh:
It's amazing that unofficial development is an entire OS version better than OEM work! :good:
Hi,
nice job....i would donate for development....fix bluetooth?
giar72 said:
....fix bluetooth?
Click to expand...
Click to collapse
I tried to fix it, but I couldn't...
sorry...
Hell yeah, nice work. Probably not going to install it since I rely on Google pay and Bluetooth headphones regularly, but it's nice to finally see some roms for this device.
problem help please
ilia3367 said:
- = Treble Zoom = -
This custom ROM based on Havoc-OS 3.5.
Prerequisites - bootloader must be unlocked, clean Stock firmware and TWRP must be installed.
What's done:
- integrated GAPPS (Play Market, Chrome, Google Dialer, Messages, Contacts, etc.), but nothing extra. YouTube has been removed because I use YouTube Vanced);
- installed Nova Launcher (I recommend using it as the main one), RootExplorer, Asus File Manager (for simple tasks), Asus Gallery, AdAway ads blocker, Motor Command Center 2;
- integrated Moto camera from the latest firmware draining. Fully working with the work of all camera modules! In addition the best, in my opinion, for this ROM and our phone Google Camera mod;
- working Adaptive Brightness;
- cleaned up and made the system a little bit easier.
Installation Instruction
1. Download the Project Treble system image archive. Unpack the archive and copy the ROM image to an external SDCard.
2. Copy to external SD Card Magisk Installer https://github.com/topjohnwu/Magisk (latest version for today Magisk v20.4), Disable_Dm-Verity_ForceEncrypt https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389 (latest version for today Disable_Dm-Verity_ForceEncrypt_03.04.2020 https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip ) and Permissiver_v4 (see attachments)
3. Reboot in TWRP and go to the "Wipe" tab, "Advanced Wipe" and select Dalvik, System, Data, and then go back two steps back and do a "Swipe Factory reset".
4. Install the Treble Zoom system image. In the "Install" tab in the lower right corner click "Install image" and select ROM Image. A window will open in which you should select partition "System Image" in which the image where to be installed. Swipe for confirm flash.
5. When the installation is complete, go to "Wipe" and perform a "Format Data".
6. Install the Magisk.zip, Disable_Dm-V_ForceEncrypt.zip and Permissiver_v4.zip. Reboot into the system and make the settings, use the Project Treble working system.
The first launch will be a bit long, don't worry and be happy!
Noticed problems on Treble Zoom - Does not pass SafetyNet check (ctsProfile: false; basicIntegrity: true). On Google Play, your device is not certified, but applications are installed and updated. Wired headphones are plugged in. When connected, the Bluetooth headset in the Dialer application works, but when listening to audio, video, YouTube is not.
Fingerprint Unlocking by fingerprint is implemented for scanners on the back of the phone. This problem can be corrected in the following way:
Connect the device to your PC and enter the following commands
Code:
adb shell
su
setprop persist.sys.fp.fod.location.X_Y 450,1760
setprop persist.sys.fp.fod.size.width_height 194,194
A green circle will appear in the display of your device, which is responsible for your fingerprint.
Click to expand...
Click to collapse
so i tried to install the rom everything wwent well untill it kept booting to twrp then installed again and now it wont boot at all when plugged in it only lights up the moto sign on the back what can i do?
forgot to mention
death1426 said:
so i tried to install the rom everything wwent well untill it kept booting to twrp then installed again and now it wont boot at all when plugged in it only lights up the moto sign on the back what can i do?
Click to expand...
Click to collapse
i think i accidentally hit boot on slot b on twrp if so how can i fix this if it wont boot into bootloader?
To load into slot A, execute the command:
fastboot --set-active=a
Does it still has the moto shortcuts? Like alsways on display and the flashlight gesture?
There is a 3.8 version in the Havoc-os 3.5 link, can I flash it on One Zoom?...
thirdphotographer said:
There is a 3.8 version in the Havoc-os 3.5 link, can I flash it on One Zoom?...
Click to expand...
Click to collapse
This ROM is not the original GSI Havoc-OS image.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Steps to Install Pixel Experience Plus GSI Android 13 on Samsung Galaxy S20 SCG01 Japan
Note: I am not the Developer I am sharing…
-Almost everything,
Fingerprint Working
Face unlock not Working only on A13
Phh setting Qualcomm Enable (use alternative audio policy ) unleash the power of snapdragon Audio Clarity for Music Lover
DON'T FLASH GAPPS, ALREADY INCLUDED
Download Links
Odin https://www.odinflash.com/download
TWRP Recovery TWRP 3.7.0_12
Vbmeta_disabled Download
Pixel Experience GSI Download full https://github.com/ponces/treble_build_pe/releases
Magisk Download
Unlock the bootloader
1. Go to your phone's settings
2. Scroll down and click on the "About phone" section
3. Click on "Software information"
4. Tap on the build number several times until you see a message saying "Developer mode has been turned on"
5. Go back to the settings homepage
6. Scroll down to the very bottom and select the "Developer options" section
7. Enable the "OEM unlocking" option
8. Scroll down and enable the "USB Debugging" Option
9. Connect your phone to your computer with a USB cable
10. Turn off your phone
12. Connect Use to only in PC press volume up + volume down at the same hold same time now connect C port to Phone
13. When you see the blue "Warning" screen, long press the volume up button to unlock bootloader
14. After the reset, start a new device setup and connect only to the internet skip all.
15.Enable Developer option if you can see Bootloader unlock tick Now good to go.
Install TWRP Custom Recovery
16. Open Odin
17. Uncheck auto reboot in Odin and flash TWRP in AP slot and vbmeta_disabled.tar in USERDATA Start Flash. (If failed you are not connected internet after Unlocked Bootloader so Follow up 14)
18.Hold volume down and power until the screen goes black then immediately switch to holding volume up and power to reboot into TWRP.
19.Go to Advanced > Terminal, type: multidisabler. (You will see " - Finished." When it is done.)
20.Go to wipe, format data, and type "yes" to confirm.
21.go Back Select "Dalvik / ART Cache" "Data" and "Cache”.
21. Reboot to TWRP
Install Pixel Experience GSI
22. Extract Pixel Experience file now you can see IMG file change name to system.img
23. Copy the system.img and Magisk files to internal storage.
24. TWRP Click Install and down below you can see INSTALL IMAGE choose system.img path is System.
25. Flash Magisk and reboot.
79. Set-up your new ROM !!
ENJOY !!!
To fix safty net (very important) no ned to flash any file.
1. flash magisk after reboot update the magisk and hide magisk manage reboot.
2. Now enable zysik in magisk setting choose play store and play services clear data for both reboot bhammmmm your safetynet is fixed.
SCREEN SHOT
To avoid any confusion between this and full ROMs that include kernels, I have changed the title of your post to appropriately reflect that this is a GSI.
Thanks.
Does this work on g986n
Does this work on g986n
DesrtSailor said:
Does this work on g986n
Click to expand...
Click to collapse
You can try it's an GSI ROM. use this recovery for your Model
https://androidfilehost.com/?w=files&flid=316866
Great one bro. Will VOLTE & all the functions in camera works?
There are 3 versions of gsi available. Normal, lite, vndklite. Which one we need to flash?
Pixel Experience GSI download requires authorization
please post the kernel version screen shot.
psychem said:
please post the kernel version screen shot.
Click to expand...
Click to collapse
bnskdd said:
Pixel Experience GSI download requires authorization
Click to expand...
Click to collapse
No Need any authorization Just download full rom i have tested with full rom only if you want you can check with Slim rom As well.
pratheepdx said:
No Need any authorization Just download full rom i have tested with full rom only if you want you can check with Slim rom As well.
Click to expand...
Click to collapse
Successfully swiped in, thank you for your contribution
High refresh rate working?
The updater function is not working.
Fingerprint sensor is not detecting finger, keeps saying lift and re touch again.
120 fps working finger print is working with latest firmware SCG01KDU1CVG3. try to flash latest stock firmware which is mentioned above and try again.
@pratheepdx bro I have installed the latest files as mentioned still fingerprint is not working. and when I go into the updater option it crashes for some reason. The fingerprint is very crucial and if possible please fix it..
Olink007 said:
@pratheepdx bro I have installed the latest files as mentioned still fingerprint is not working. and when I go into the updater option it crashes for some reason. The fingerprint is very crucial and if possible please fix
Click to expand...
Click to collapse
Do you have tempered glass for your screen or something else? its happens to me as well even with Stock Firmware once removed the issue was resolved for me I've verified that the Pixel GSI Android 13 Fingerprint works without any issue and Android 12 GSI Face Unlock and fingerprint both function flawlessly.
Does this work on s20 ultra snapdragon G9880 ?
Does it support Adaptive brightness? cause I can't find it in the settings.
paazoka said:
Does this work on s20 ultra snapdragon G9880 ?
Click to expand...
Click to collapse
If your bootloader unlockable of course this GSI will work. Try at your own risk.