Method for Rooting Your REALME U1!!
Now here is the full procedure of rooting ur REALME U1
Read this carefully!!
I am not responsible if anything happens to your phone!!I'm not responsible if it gets bricked or dies
Thanks to:
Thanks to BestTipsYT (Its Me)for extracting system and providing boot.img, recovery etc!
Thanks to BestTipsYT (Its Me) for patching boot image!
Thanks to BestTipsYT (Its Me) for testing Magisk
Thanks to Amit for The Suggestion Of This Method!!} - In Telegram
!!!!!!!!!!!But Before Doing This BootLoader Needs To Be Unlocked Then Proceed To This Process!!!!!!!!!!!!!!
How to flash Magisk boot image!!
•First : Enable Usb Debugging and Oem unlock in Developer options
•Second : Connect ur phone to ur PC "You may get a request to authorize USB debugging on the device, accept it."
•Third : Install ADB on ur PC
•Fourth : Copy the Magisk boot image into ur PC in ADB folder.
•Fifth : Now Click this in abd folder - Shift + Right click and select "Open Powershell or Open ADB "
•Sixth : Use the following command and boot into fastboot mode :
adb devices(to check if ur phone is connected)
Then :
adb reboot bootloader
After that :
fastboot flash boot rootboot.img
•After this reboot ur phone using manually.(By Holding Vol Up + Power Button)
Then install Magisk Manager
Here is the Link to download Magisk boot image : https://mega.nz/#!icdH1ABY!DWhCimsvZfYXKlD7WwP-nNeKe7UoYyPneq0N8B9y2uE
Here is the Link to download Magisk Manager : https://mega.nz/#!mck1UYID!DjPXl9SY-BLJdMtErcLWnC_v9eExt5r5PXUsPGUMmy8
If u guys have any doubt about how to install boot image using ADB , then u can Google it or YouTube it.
Or Alternatively Contact Me In MOD Edit:- Links Removed
NOTE!! IF YOU UPLOAD IT ON YOUTUBE OR WEBSITE WITHOUT GIVING CREDITS THEN I WILL GIVE YOU COPYRIGHT STRIKE TO END YOUR CARRIER OF YOUTUBE OR SITE!!THIS WORK BELONGS TO ME!!!!
Thanks man
Did you unlock bootloader from fastboot mode before doing this?
Sent from my Infinix X573 using Tapatalk
Skyhuppa said:
Thanks man
Did you unlock bootloader from fastboot mode before doing this?
Sent from my Infinix X573 using Tapatalk
Click to expand...
Click to collapse
ya bro its needed:good::good::good:
Thank you good friend
Sent from my Infinix X573 using Tapatalk
Skyhuppa said:
Thank you good friend
Sent from my Infinix X573 using Tapatalk
Click to expand...
Click to collapse
:good::good::good::good:
yuvarajv952 said:
:good::good::good::good:
Click to expand...
Click to collapse
i just got my phone bricked, followed all the steps, some help?
aayamz said:
i just got my phone bricked, followed all the steps, some help?
Click to expand...
Click to collapse
what was the process u done bro..???
bricked my phone trying this!
yuvarajv952 said:
Method for Rooting Your REALME U1!!
Now here is the full procedure of rooting ur REALME U1
Read this carefully!!
I am not responsible if anything happens to your phone!!I'm not responsible if it gets bricked or dies
Thanks to:
Thanks to BestTipsYT (Its Me)for extracting system and providing boot.img, recovery etc!
Thanks to BestTipsYT (Its Me) for patching boot image!
Thanks to BestTipsYT (Its Me) for testing Magisk
Thanks to Amit for The Suggestion Of This Method!!} - In Telegram
!!!!!!!!!!!But Before Doing This BootLoader Needs To Be Unlocked Then Proceed To This Process!!!!!!!!!!!!!!
How to flash Magisk boot image!!
•First : Enable Usb Debugging and Oem unlock in Developer options
•Second : Connect ur phone to ur PC "You may get a request to authorize USB debugging on the device, accept it."
•Third : Install ADB on ur PC
•Fourth : Copy the Magisk boot image into ur PC in ADB folder.
•Fifth : Now Click this in abd folder - Shift + Right click and select "Open Powershell or Open ADB "
•Sixth : Use the following command and boot into fastboot mode :
adb devices(to check if ur phone is connected)
Then :
adb reboot bootloader
After that :
fastboot flash boot rootboot.img
•After this reboot ur phone using manually.(By Holding Vol Up + Power Button)
Then install Magisk Manager
If u guys have any doubt about how to install boot image using ADB , then u can Google it or YouTube it.
Or Alternatively Contact Me In MOD Edit:- Links Removed
NOTE!! IF YOU UPLOAD IT ON YOUTUBE OR WEBSITE WITHOUT GIVING CREDITS THEN I WILL GIVE YOU COPYRIGHT STRIKE TO END YOUR CARRIER OF YOUTUBE OR SITE!!THIS WORK BELONGS TO ME!!!!
Click to expand...
Click to collapse
Hello, i did exactly how you mentioned and now my phone does not turn on.
Got my phone bricked. It doesn't start. Please test if it is still working for realme U1 after the latest color OS update.
Phone bricked
FYI i don't think its working after the latest update.
Will this work for colorOS 5.2 and android 8.1.0?
---------- Post added at 06:53 PM ---------- Previous post was at 06:51 PM ----------
yuvarajv952 said:
Method for Rooting Your REALME U1!!
Now here is the full procedure of rooting ur REALME U1
Read this carefully!!
I am not responsible if anything happens to your phone!!I'm not responsible if it gets bricked or dies
Thanks to:
Thanks to BestTipsYT (Its Me)for extracting system and providing boot.img, recovery etc!
Thanks to BestTipsYT (Its Me) for patching boot image!
Thanks to BestTipsYT (Its Me) for testing Magisk
Thanks to Amit for The Suggestion Of This Method!!} - In Telegram
!!!!!!!!!!!But Before Doing This BootLoader Needs To Be Unlocked Then Proceed To This Process!!!!!!!!!!!!!!
How to flash Magisk boot image!!
•First : Enable Usb Debugging and Oem unlock in Developer options
•Second : Connect ur phone to ur PC "You may get a request to authorize USB debugging on the device, accept it."
•Third : Install ADB on ur PC
•Fourth : Copy the Magisk boot image into ur PC in ADB folder.
•Fifth : Now Click this in abd folder - Shift + Right click and select "Open Powershell or Open ADB "
•Sixth : Use the following command and boot into fastboot mode :
adb devices(to check if ur phone is connected)
Then :
adb reboot bootloader
After that :
fastboot flash boot rootboot.img
•After this reboot ur phone using manually.(By Holding Vol Up + Power Button)
Then install Magisk Manager
Here is the Link to download Magisk boot image : https://mega.nz/#!icdH1ABY!DWhCimsvZfYXKlD7WwP-nNeKe7UoYyPneq0N8B9y2uE
Here is the Link to download Magisk Manager : https://mega.nz/#!mck1UYID!DjPXl9SY-BLJdMtErcLWnC_v9eExt5r5PXUsPGUMmy8
If u guys have any doubt about how to install boot image using ADB , then u can Google it or YouTube it.
Or Alternatively Contact Me In MOD Edit:- Links Removed
NOTE!! IF YOU UPLOAD IT ON YOUTUBE OR WEBSITE WITHOUT GIVING CREDITS THEN I WILL GIVE YOU COPYRIGHT STRIKE TO END YOUR CARRIER OF YOUTUBE OR SITE!!THIS WORK BELONGS TO ME!!!!
Click to expand...
Click to collapse
Will this work on Color OS 5.2 and android 8.1.0?
Guys the main reason your phone got bricked is due to trying to root it from COS 5.2. COS 6.0 Will give you no errors while rooting your phone using this process.
Hope this helps!
Related
DESCRIPTION:
Today i found the New Root & Installing Custom Recovery(CWM) in KITKAT surely...
I will Provide correct info and help......All This you are gonna do is At your Own Risk... Damage to your device of any type is at your Own Responsibility,,, Don't point finger at me or I will Just Laugh at you...
PREREQUISITES:
First of all, You should Unlock Bootloader so that on every reboot, Your Root shouldn't damage. You can unlock bootloader by simple procedure...and also enable the USB Debugging from Developers options in settings...
PROCEDURE:
FOR UNLOCKING BOOTLOADER, FOLLOW THIS
Download the Attached PC Software Named "Huawei Product ID Generator" then Extract this zip file...
Now open it, fill all Info in it and select the device Y300-0000... After this, it will Generate a Product ID for your Phone....
Now go to this site Unlocking Code website
Login to this site using your Huawei id which you made in themes store or in huawei cloud!!
Use the Serial Number Written on BACK OF YOUR PHONE..!!
Fill like, samrtphone>Product Model should be "HUAWEI Y300-0000"
then fill all fields and captcha also.. Click Submit and get the UNLOCKING CODE....
you can unlock bootloader wid that code then and root permanently....
After receiving the unlock code, write down the code;
Now go in your 4C's Settings>About Phone.
Then tap on Build number 10 times,,, you will get the Developers options in Last of Settings app. Open Developers option and Turn On the USB DEBUGGING.
Now connect your device to PC in MTP mode and then install the ADB drivers for it....
To install adb drivers correctly, use the Software Adb Driver Installer from here
LINK FOR ADB DRIVER INSTALLER
Full ADB folder is also attached Below.... put this folder in drive C.
Now Direct the cursor on the folder ADB, hold Shift and the right mouse button and choose "Open Command Window";
connect your phone to the PC in the "media device";
at the command prompt prescribe ADB Devices ;
then we write ADB reboot bootloader (the device will reboot mode fastboot);
then typed fastboot oem unlock **************** (where the asterisks replace unlock code);
BOOTLOADER UNLOCKED NOW!!
Now You are Ready to install CWM recovery first.... Download the Root and CWM recovery File from here...
This File Also contain Stock Recovery of Kitkat Rom
4C Root+CWM by [email protected]
After this, unzip it and better come again in Fastboot Mode like above as explained, this time, move the recovery file to the adb folder which you want to install.
After that, type fastboot devices to see if your device is correctly attached to PC or Laptop. if yes then type this command in adb to install the Custom Recovery(CWM) in your phone.
fastboot flash recovery cwm.img
Then
fastboot reboot
This will reboot your phone and cwm installed.
Now move the Root.zip file to sd card and using CWM recovery, install it.. and Whoa!
Its done and phone Rooted for sure... wid no bootloop chance..
Now Customize Your Phone Install Viper4Android And Roms Xposed ^_^
If You Want To Stock Recovery After Root Simply Use The Command In Fastboot Mode
fastboot flash recovery stock.img
Then
fastboot reboot
This way, you will have Stock Recovery back.
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
This is Based on Stock Huawei Kernel, Not compiled by Me...
Contributors:
@HassanMirza01
Version Information:
Status: Stable
Stable Release Date: 2015-09-28
Created on: 2015-05-29
Last Updated on: 2016-02-19
Reserved
I'll try it when i arrive home.
Enviado do meu CHC-U01 através de Tapatalk
I flashed the cwm zip .. But now unable to boot in to recovery .. After doing Vol up + power .. Honor title come n nothing happens .. Normal booting is fine , just recoverys bricked I think :crying:
Nops... keep pressing vol up for 3 sec then keep power button pressed also untill cwm appears... Dont release keys when logo appear... Release when cwm appears... @Srijit
Press thanks if i helped you
Followed all the steps but still not able to boot into cwm .. I have lollipop beta installed .. Is that the problem ? :crying:
Its for kitkat nd has kitkat kernel.....
inshaalmirza said:
Today i found the New Root & Installing Custom Recovery(CWM) for sure,,,
First of all, You should Unlock Bootloader so that on every reboot, Your Root shouldn't damage. You can unlock bootloader by simple procedure...and also enable the USB Debugging from Developers options in settings...
Just mail at [email protected] wid subject that unlock bootloader huawei honor 4c and in mail type all info..like imei, serial no. Product number nd model number...they will send you unlocking code....
you can unlock bootloader wid that code then and root permanently....
After receiving the unlock code, write down the code;
download the installer utility ADB and Fastboot and set (if you have them yet);
direct the cursor on the folder ADB, hold Shift and the right mouse button and choose "Open Command Window";
connect your phone to the PC in the "media device";
at the command prompt prescribe ADB Devices ;
then we write ADB reboot bootloader (the device will reboot mode fastboot);
then typed fastboot oem unlock **************** (where the asterisks replace unlock code);
Now You are Ready to install CWM recovery first.... Download the Root and CWM recovery File from here...
https://drive.google.com/file/d/0B0iMDu5QRxNicU1EalpZeHNUR3M/view?usp=sharing
After this, unzip it and better come again in Fastboot Mode like above as explained, this time, move the recovery file to the adb folder which you want to install.
After that, type fastboot devices to see if your device is correctly attached to PC or Laptop. if yes then type this command in adb to install the Custom Recovery(CWM) in your phone.
fastboot flash recovery recovery_cm.img
Then
fastboot reboot
This will reboot your phone and cwm installed.
Now move the Root.zip file to sd card and using CWM recovery, install it.. and Whoa!
Its done and phone Rooted for sure... wid no bootloop chance..
Now Customize Your Phone Install Viper4Android And Roms Xposed ^_^
If You Want To Stock Recovery After Root Simply Use The Command In Fastboot Mode
fastboot flash recovery recovery_official.img
Then
fastboot reboot
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
Credits: Gizdev site...
Click to expand...
Click to collapse
where is for lollipop,,
No lollipop cwm yet...
tested recovery and cannot made a advanced restore. Tried only system but after selection cannor made it to apply.
Anyone knows how?
I backup full... Nd its done
I still dont have the bootloader unlock code
Sent from my ALCATEL ONE TOUCH 7047D using XDA Forums
Lol.... Follow procedure carefully... Nd dont write anything other
Honor 4x I need custom rom and cwm r lollipop update
Sent from my Che1-L04 using Tapatalk
inshaalmirza said:
I backup full... Nd its done
Click to expand...
Click to collapse
Me to.
I tried to restore only system but don't know how.
Everything else seems to work OK.
Enviado do meu CHC-U01 através de Tapatalk
OP! how do you able to get CWM,
does it came from own recovery of 4C? if yes, can you show how
Custom recoveries use the kernel properties of device.... Not the stock recovery converted to cwm.....
Hey. Kingo root android application make tempory root your device. After restart mobile. Back to normal
Sent from my CHM-U01 using XDA Forums
Unlock bootloader... Then it wont come back to normal...
HELP ! HELP ! HELP !
hard bricked by flashing a miui rom from twrp without deleting the emmc file :crying::crying::crying::crying::crying::crying:
i can only go to fastboot , no recovery , miui logo for 3 seconds
please someone help me !!! :crying::crying:
will the test point work ?
Edit :-
Thank you all , i managed to unbtick using test point .!!
I know enough to tell you that I'd you can get fastboot yo work, its not bricked. Honestly I don't own the device. I own lg g3. And it might be different for this device but you can try pushing recovery from fasyboot mode using your PC. You might wanna google how to tbh and ask around ppl with similar device if possible. Pushing through fastboot/adb is most common so pushing recovery will format recovery partition and install/push new one. That will get you working recovery. (I hope). Happy flashing.
In fastboot check if bootloader is locked by running the device info command... It is not locked you have hopes... Use fastboot to flash fastboot rom package with modified emmc file and modded image...
Its locked
Only way is to do test point method or take it to a service center
#BATMAN# said:
HELP ! HELP ! HELP !
hard bricked by flashing a miui rom from twrp without deleting the emmc file :crying::crying::crying::crying::crying::crying:
i can only go to fastboot , no recovery , miui logo for 3 seconds
please someone help me !!! :crying::crying:
will the test point work ?
Click to expand...
Click to collapse
try 1. this:http://en.miui.com/thread-235865-1-1.html
2. http://en.miui.com/thread-244814-1-1.html
3.http://en.miui.com/forum.php?mod=viewthread&tid=257227&highlight=test%2Bpoint%2Bredmi%2Bnote%2B3
4.http://en.miui.com/thread-245347-1-1.html
Let me know if you have succes!Good luck!
Luiggi79 said:
try 1. this:http://en.miui.com/thread-235865-1-1.html
2. http://en.miui.com/thread-244814-1-1.html
3.http://en.miui.com/forum.php?mod=viewthread&tid=257227&highlight=test%2Bpoint%2Bredmi%2Bnote%2B3
4.http://en.miui.com/thread-245347-1-1.html
Let me know if you have succes!Good luck!
Click to expand...
Click to collapse
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
faced the same problem bro better give it in care if dnt wnt to give it to care just go to( http://en.miui.com/thread-235865-1-1.html ) or try ( http://xiaomitips.com/guide/fix-bricked-redmi-note-3-no-unlock-permission/ ) this if all didnt work go to care bro
#BATMAN# said:
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
Click to expand...
Click to collapse
Steps:
A).On the computer in windows disable driver signature enforcement featrure and turn off any protection like security suites,AV software or firewalls.To disable driver signature enforcement you must open command prompt and type:a)bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS and press enter
b)bcdedit.exe -set TESTSIGNING ON and press enter
c)reboot computer
d) install MI flash after reboot;download it from here :http://en.miui.com/thread-235865-1-1.html
B) On the phone:
1.Hold Vol - and Vol + and plug Usb cable in computer&phone
2.download ADB files from here http://en.miui.com/thread-235865-1-1.html
3.extract files from archive to folder
4. in this folder,where you have extracted adb files press:shift on keyboard and right click on the mouse in the same time and choose "open command window here"
5.in command window type:a)adb devices and press enter
b)adb reboot edl and press enter
Now you are in download mode
6.from device manager install qualcomm driver;it should be seen in other devices section;right click---update driver----navigate to :C/Program files(X86)/XIaomi/Mi flash/Qualcomm/Driver;Note:you need x64 windows computer for this operation
7.start MI flash---right click and run as administrator;browse for rom folder,you need a fastboot rom(the rom need with suffix tgz to be;not zip).Put the tgz archive(rom) in Local Disk C and extract with winrar!!!!!!(use winrar) to folder;rename the created folder to ROM.In MI flash when do browse for folder SELECT ENTIRE FOLDER NOT JUST THE FOLDER IMAGES.OK?
8.in MI Flash window press refresh button from up side;the device should appear on the list
9.in MI Flash windows in the down side of windows tick the litlle circle who say:Flash all
10.Press flash button from up
1.1. Wait until it finish flashing procedure:should appear in the right side from device peration completed succesfully
12.Remove usb cable and press power button on the device;keep the power button pressed until the device give you a vibration,the release it
Luiggi79 said:
Steps:
A).On the computer in windows disable driver signature enforcement featrure and turn off any protection like security suites,AV software or firewalls.To disable driver signature enforcement you must open command prompt and type:a)bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS and press enter
b)bcdedit.exe -set TESTSIGNING ON and press enter
c)reboot computer
d) install MI flash after reboot;download it from here :http://en.miui.com/thread-235865-1-1.html
B) On the phone:
1.Hold Vol - and Vol + and plug Usb cable in computer&phone
2.download ADB files from here http://en.miui.com/thread-235865-1-1.html
3.extract files from archive to folder
4. in this folder,where you have extracted adb files press:shift on keyboard and right click on the mouse in the same time and choose "open command window here"
5.in command window type:a)adb devices and press enter
b)adb reboot edl and press enter
Now you are in download mode
6.from device manager install qualcomm driver;it should be seen in other devices section;right click---update driver----navigate to :C/Program files(X86)/XIaomi/Mi flash/Qualcomm/Driver;Note:you need x64 windows computer for this operation
7.start MI flash---right click and run as administrator;browse for rom folder,you need a fastboot rom(the rom need with suffix tgz to be;not zip).Put the tgz archive(rom) in Local Disk C and extract with winrar!!!!!!(use winrar) to folder;rename the created folder to ROM.In MI flash when do browse for folder SELECT ENTIRE FOLDER NOT JUST THE FOLDER IMAGES.OK?
8.in MI Flash window press refresh button from up side;the device should appear on the list
9.in MI Flash windows in the down side of windows tick the litlle circle who say:Flash all
10.Press flash button from up
1.1. Wait until it finish flashing procedure:should appear in the right side from device peration completed succesfully
12.Remove usb cable and press power button on the device;keep the power button pressed until the device give you a vibration,the release it
Click to expand...
Click to collapse
im trying now! hopefully it will work :good::good:
#BATMAN# said:
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
Click to expand...
Click to collapse
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Stuck at mi logo
Device unlocked
bootloader unlocked
twrp working
how to get rid of this
fylim said:
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Click to expand...
Click to collapse
me too , im still searching for a solution ......:crying::crying::crying::crying::crying:
the only solution i found was the test point but im trying to fix it without opening my phone
i you find anything please let me know !!!!!!!!!!!!!!!!
avrrv3689 said:
Device unlocked
bootloader unlocked
twrp working
how to get rid of this
Click to expand...
Click to collapse
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
#BATMAN# said:
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
Click to expand...
Click to collapse
finlly got out of it
thanxx
can u suggest a procedure to unlock bootloader and root the device and twrp without bricking or bootloop
avrrv3689 said:
finlly got out of it
thanxx
can u suggest a procedure to unlock bootloader and root the device and twrp without bricking or bootloop
Click to expand...
Click to collapse
Read these carefully #DO AT YOUR OWN RISK#
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-instruction-unlock-bootloader-t3355904
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-twrp-root-7-2-3-t3359492
http://forum.xda-developers.com/redmi-note-3/how-to/redmi-note3-prokenzo-guiderom-global-t3341102
:good: hit thanks if i helped you :good:
#BATMAN# said:
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
Click to expand...
Click to collapse
"BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY"
If bootloader is unlocked officially then can we flash any MIUI recovery ROM using TWRP without need of modifying Recovery ROM (deleting bootloader file , patch boot.img) ? can we switch to any MIUI ROM then easily ?
akhil17kr said:
"BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY"
If bootloader is unlocked officially then can we flash any MIUI recovery ROM using TWRP without need of modifying Recovery ROM (deleting bootloader file , patch boot.img) ? can we switch to any MIUI ROM then easily ?
Click to expand...
Click to collapse
Yes i think you can but im not 100% sure :good::good:
#BATMAN# said:
Yes i think you can but im not 100% sure :good::good:
Click to expand...
Click to collapse
Oh Lol , have asked many people but none of them are sure about this .. but i have asked from mi chat they said once bootloader is unlocked you can't lock it back by flashing MIUI roms as it's security feature . SO we can say unofficial method is problem if you like to switch to between ROM's but official one will not create any problems ..still not sure though have to ask who have done through Official method.
fylim said:
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Click to expand...
Click to collapse
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
To enter in download mode see this youtube video:https://www.youtube.com/watch?v=4Fs5n3W1c8U
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
#BATMAN# said:
me too , im still searching for a solution ......:crying::crying::crying::crying::crying:
the only solution i found was the test point but im trying to fix it without opening my phone
i you find anything please let me know !!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here: http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
How to enter in download mode see this youtube video :https://www.youtube.com/watch?v=4Fs5n3W1c8U
Luiggi79 said:
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
To enter in download mode see this youtube video:https://www.youtube.com/watch?v=4Fs5n3W1c8U
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here: http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
How to enter in download mode see this youtube video :https://www.youtube.com/watch?v=4Fs5n3W1c8U
Click to expand...
Click to collapse
didn't work for me !:crying::crying:
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
redminote3 said:
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
Click to expand...
Click to collapse
But my pc dont see phone (mi pc suite , and mi flash ) .
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
still problem
redminote3 said:
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
Click to expand...
Click to collapse
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
innynizty said:
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
Click to expand...
Click to collapse
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
innynizty said:
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
Click to expand...
Click to collapse
which miflash version used for now? pls ensure you use 201604xx (64 bit only) or 20160830 (32/64 bit)
to flash device, already bunch of guide on guide section. pls do some research there.
to unlock your phone, you can follow below unofficial ways or official ways which require to apply to mi server
en.miui.com/thread-253680-1-1.html
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
innynizty said:
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
Click to expand...
Click to collapse
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
[email protected] said:
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
The solution is here:
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B8198j2pU-9ZcjVFZjFkLVAtT1E/view?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
https://www.youtube.com/watch?v=T--f7ClmQVM
Click to expand...
Click to collapse
When i click on edl they only shows me " waiting for device" ?
innynizty said:
When i click on edl they only shows me " waiting for device" ?
Click to expand...
Click to collapse
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
[email protected] said:
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
Click to expand...
Click to collapse
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
innynizty said:
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
Click to expand...
Click to collapse
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
[email protected] said:
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
Click to expand...
Click to collapse
I cant turn on my phone and enable nothink , i know how to root phone and other .
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
[email protected] said:
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
Click to expand...
Click to collapse
I try to install miui and then my phone stuck in xiaomi logo ;/
innynizty said:
I try to install miui and then my phone stuck in xiaomi logo ;/
Click to expand...
Click to collapse
It means it has no ROM installed now....
Even without that turning on you could boot into edl and unlock and flash twrp..
Don't know... Try again and search on net.. Now
Im also facing same issue???
Sent from my ASUS_T00J using Tapatalk
Do like people write before and Its easy to repair, Thanks boys
Guide to root Mi5
First of all you should unlock the bootloader first then only we can root our MI5
If You want to Unlock the bootloader MI5 follow this link :
http://en.miui.com/thread-267361-1-1.html
You can request the unlock code with any rom - Example global or Stable rom it doesnt matter (U should enable the developer options and enable the OEM unlocking and Usb debugging on
You have to create MIUI account and request the code - You have to wait for 3 days for receive the unlock code
after received the code. u can try with MI unlock code with this app . it will say binding time is too less u have to wait some time. It will say like that . (U dont want to wait try older version of Unlocking app ) it may allow u to unlock instantly ..
Follow this guide for unlocking app : http://en.miui.com/thread-536201-1-1.html
After unlocking the bootloader u have to flash twrp recovery
check this link for recovery : https://dl.twrp.me/gemini/ ( always use latest one)
download it and flash through fastboot mode.
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
(Simple - You have TWRP recovery now)
ROOT GUIDE :
After installing TWRP recovery download super su zip file from chainfire
Download it from here : https://download.chainfire.eu/696/supersu/
flash it through TWRP ( Entering procedure for twrp by pressing power button + Volume up button)
Flashing through fastboot :
Step 1 : Connect ur phone to fastboot mode
Step 2 : Download it from this thread MI Flash tool http://xiaomiadvices.com/download-xiaomi-mi-flash-tool/
Step 3 : Download the fastboot rom this thread : http://xiaomiadvices.com/download-miui-8-global-stable-rom-fastboot-recovery-rom/
Step 4 : Flash it through fastboot mode - ( Note fastboot firmware is not in flashable extension - u have to change it the correct extension and it will work only place in C drive only (I mean which drive the os is installed ) - I attach the screenshot guide to change the extension later on - or else Google it
Step 5 : Flash it through the MI FLASH app and select flash all -
thats it
UNBRICK GUIDE: (also Relocking bootloader)
unfortunately ur device is bricked means u cant turn on ur device . any button will not work in ur phone so.. first u connect ur phone in data cable .. u might be see the QC bootloader driver will install in ur computer . After that u cant flash anything in MI flash tool . coz MI flashtool will not recognize ur device .
So .
Step 1 : Download MI5 CHINA PC suite to ur computer and install it ( English version will not work ) china version only updated
Step 2 : http://zhushou.xiaomi.com/ this link china pc suite is available
step 3 : Download firmware for our device http://en.miui.com/download-299.html download it from here (Global or Developer version thats not an issue)
Step 4 : Connect ur phone and open the pc suite . it has the option to select the update file in first menu ( I too dont know wat is written in that pc suite ) coz all is in chinese version ) check all the options u will find the option like select the update file that time u should press shift then only u can able to access the select option after that select the downloaded firmware ) simple u can see green option after selecting firmware. ( If u have doubt u can ask me in pm any time)
Step 5 : Flashing time it will take upto 30 minutes .
step 6 : After flashing it will automatically relock the bootloader .
Thats it . u have successfully unbricked the phone
(In some cases PC also not recognize the QC bootloader also .. that case is needed some hardware knowledge to open it the phone see this video to unbrick the hard stages : https://www.youtube.com/watch?v=ED96PJ-qYMM - See this video
IMPORTANT STEP :
After flashing ur mobile may not be turn on . that time put ur charger and PRESS HOME BUTTON + VOLUME UP AND DOWN+ POWER BUTTON together for 5 minutes it will on .
Sorry for my bad English
This all stuff i experienced much . So i shared with u all .
Thanks. More guide is coming soon :good:
This subforum is only for development threads..
hi i have a problem i installed custom kernel and after that my phone cannot see a sim card and saying invalid phone id etc.
what can i do now?
i tried to flash official firmware and nothing
After installing twrp is necessary to do any kind of wipes? does this method have any issues with encryption? Thanks
kurpiq said:
hi i have a problem i installed custom kernel and after that my phone cannot see a sim card and saying invalid phone id etc.
what can i do now?
i tried to flash official firmware and nothing
Click to expand...
Click to collapse
Which rom you are using??? flash the correct firmware.. if it is 7.1.2 nougat rom . flash 7.7.6 dev firmware
TheIceDragon said:
After installing twrp is necessary to do any kind of wipes? does this method have any issues with encryption? Thanks
Click to expand...
Click to collapse
No issues with your encryption
i have successfully flashed it, but the phone still cannot turn on, tried to put on charger and PRESS HOME BUTTON + VOLUME UP AND DOWN+ POWER BUTTON together for 5 minutes still cannot.... how? please help...
mi5
tyikki said:
i have successfully flashed it, but the phone still cannot turn on, tried to put on charger and PRESS HOME BUTTON + VOLUME UP AND DOWN+ POWER BUTTON together for 5 minutes still cannot.... how? please help...
Click to expand...
Click to collapse
i have this problem too for about too week, the only way you can turn on phone by flashing android 6 roms, such as ""gemini_global_images_V8.1.4.0.MAAMIDI_20161201.0000.00_6.0_global_e30a02e467.tgz"" the phone has problem with nougat.
my bootloader is unlocked but i cant change or update recovery
before two weeks ago i had miui 8.2.2 (nougat) on my phone with twrp but after restart take too long too turn on i flash it again and it is never run again on nougat ((((
---------- Post added at 10:42 AM ---------- Previous post was at 10:40 AM ----------
arunon2013 said:
Guide to root Mi5
First of all you should unlock the bootloader first then only we can root our MI5
If You want to Unlock the bootloader MI5 follow this link :
http://en.miui.com/thread-267361-1-1.html
You can request the unlock code with any rom - Example global or Stable rom it doesnt matter (U should enable the developer options and enable the OEM unlocking and Usb debugging on
You have to create MIUI account and request the code - You have to wait for 3 days for receive the unlock code
after received the code. u can try with MI unlock code with this app . it will say binding time is too less u have to wait some time. It will say like that . (U dont want to wait try older version of Unlocking app ) it may allow u to unlock instantly ..
Follow this guide for unlocking app : http://en.miui.com/thread-536201-1-1.html
After unlocking the bootloader u have to flash twrp recovery
check this link for recovery : https://dl.twrp.me/gemini/ ( always use latest one)
download it and flash through fastboot mode.
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
(Simple - You have TWRP recovery now)
ROOT GUIDE :
After installing TWRP recovery download super su zip file from chainfire
Download it from here : https://download.chainfire.eu/696/supersu/
flash it through TWRP ( Entering procedure for twrp by pressing power button + Volume up button)
Flashing through fastboot :
Step 1 : Connect ur phone to fastboot mode
Step 2 : Download it from this thread MI Flash tool http://xiaomiadvices.com/download-xiaomi-mi-flash-tool/
Step 3 : Download the fastboot rom this thread : http://xiaomiadvices.com/download-miui-8-global-stable-rom-fastboot-recovery-rom/
Step 4 : Flash it through fastboot mode - ( Note fastboot firmware is not in flashable extension - u have to change it the correct extension and it will work only place in C drive only (I mean which drive the os is installed ) - I attach the screenshot guide to change the extension later on - or else Google it
Step 5 : Flash it through the MI FLASH app and select flash all -
thats it
UNBRICK GUIDE: (also Relocking bootloader)
unfortunately ur device is bricked means u cant turn on ur device . any button will not work in ur phone so.. first u connect ur phone in data cable .. u might be see the QC bootloader driver will install in ur computer . After that u cant flash anything in MI flash tool . coz MI flashtool will not recognize ur device .
So .
Step 1 : Download MI5 CHINA PC suite to ur computer and install it ( English version will not work ) china version only updated
Step 2 : http://zhushou.xiaomi.com/ this link china pc suite is available
step 3 : Download firmware for our device http://en.miui.com/download-299.html download it from here (Global or Developer version thats not an issue)
Step 4 : Connect ur phone and open the pc suite . it has the option to select the update file in first menu ( I too dont know wat is written in that pc suite ) coz all is in chinese version ) check all the options u will find the option like select the update file that time u should press shift then only u can able to access the select option after that select the downloaded firmware ) simple u can see green option after selecting firmware. ( If u have doubt u can ask me in pm any time)
Step 5 : Flashing time it will take upto 30 minutes .
step 6 : After flashing it will automatically relock the bootloader .
Thats it . u have successfully unbricked the phone
(In some cases PC also not recognize the QC bootloader also .. that case is needed some hardware knowledge to open it the phone see this video to unbrick the hard stages : https://www.youtube.com/watch?v=ED96PJ-qYMM - See this video
IMPORTANT STEP :
After flashing ur mobile may not be turn on . that time put ur charger and PRESS HOME BUTTON + VOLUME UP AND DOWN+ POWER BUTTON together for 5 minutes it will on .
Sorry for my bad English
This all stuff i experienced much . So i shared with u all .
Thanks. More guide is coming soon :good:
Click to expand...
Click to collapse
i have problem too for about too week, the only way you can turn on phone by flashing android 6 roms, such as ""gemini_global_images_V8.1.4.0.MAAMIDI_20161201.0000.00_6.0_global_e30a02e467.tgz"", the phone has problem with nougat.
my bootloader is unlocked but i cant change or update recovery
before two weeks ago i had miui 8.2.2 (nougat) on my phone with twrp but after restart take too long (about 2hoursto turn on i flash it again and it is never run again on nougat ((((
tried to flash it with the newest MiFlash201612220 and V8.5.2.0, all successful, but it still cannot turn on.... anyone can help???
Hi after installing twrp via fastboot I am not able to enter twrp in any way, help?
hard brick Mi5
Hi! My phone brick during charge when i was asleep... he gets stuck in Mi logo and I 've tryed everything... no luck
After several types of attempts ...
in ADB window I was looking for the device with the wrong command -> is fastboot device and not adb device ... my device apears on hexadecimal
in mi flash comes the same id of the fastboot ADB (hexadecimal) and not the expectable COM "1"
I tried to flash fastboot rom without success, it says that I have the device locked ...
I have already filled in the form to unlock the bootloader already five months ago and I never received the code
- via fastboot ADB (recognizes the terminal but its designation is hexadecimal and not COM as intended) i already install all drivers , include qualcomm, but it never apears no manager device...
- via EDL (popup mode) is not possible because it is locked
- Mi unluck - blocks us 99% and says that "corrent acount is not bound to this device"
- Mi flash - recognize the device (hexadecimal), try to flash the rom via fastboot and says that the device is locked
I am desperate and without options ...
i think some hardware may be burn...
Hello there
I think I have bricked my phone quite bad. I tried the things you said but still the phone does not switch on. The interesting thing is that the green indicating light switches on and also when I press the power button the phone vibrates. I dont know what else should I do. Can you also tell me if I really have to press power + volume up and down + home button for 5 mins?
Thanks for the reply in advance.
I want to root my device:angel: Huawei GR5 mini NMO-L31 emui 5.0. so I unlock bootloader and flash twrp IMG file.
I use this commands...
adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot
It worked successfuly:good:. But when I tried to go on recovery mode by powering off my device and perss power button and volume up Button my phone shows a warning message and below that it shows your device is booting now.
I wait about 1 hour but it still the same.
What to do now?
Please help me xda-devolopers with possible way.
THANK YOU.
I mistakenly posted it before in android themes.sorry.:crying:
Hi , can you post here a warning message which appears on your screen ?
Teddy Lo said:
Hi , can you post here a warning message which appears on your screen ?
Click to expand...
Click to collapse
Your device has been unlocked
and can't be trusted.
Your device is booting now...
It was the message I stuck in there.
Please help.
A.Greninja said:
Your device has been unlocked
and can't be trusted.
Your device is booting now...
It was the message I stuck in there.
Please help.
Click to expand...
Click to collapse
Help brothers..
I can't belived I posted back to you all the steps to unbrick your device also with pictures , but I don't see here ? Who knows , maybe is not alowed or a didn't Confirm a post . I will reply you later again .
---------- Post added at 03:43 PM ---------- Previous post was at 03:25 PM ----------
#1 Download Huawei Extractor and extract to one new folder on Desktop , for example "Huawei Firmware Extractor"
http://forum.xda-developers.com/attachment.php?attachmentid=3966156
#2 Download Update.zip and extract to one new folder on Desktop , for example "Huawei Update rom"
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1581/g104/v83821/f1/full/update.zip
#3 Run Huawei Extractor , locate to UPDATE.APP from extracted rom
and do exactly like this :
https://www.youtube.com/watch?v=XAtoaL6i_i0
#4 Download and install Minimal ADB & FastBoot
https://forum.xda-developers.com/showthread.php?t=2317790
#5 Make sure your device is OFF , and press together Vol - and Power button in order to poot your phone in FastBoot mode
#6 Open Minimal Adb & FastBoot Command tool , and connect your device .
#7 Next steps is to write this command and drag your , recovery.img , boot.img and system .img in Command tool
fastboot flash recovery (drag your recovery.img) and press Enter
fastboot flash boot (drag your boot.img) and press Enter
fastboot flash system (drag your system.img) and press Enter
Once is Finish you can flash this full version
http://www.stechguide.com/download-huawei-gr5-mini-nougat-firmware/
Read more for better understanding.
http://www.stechguide.com/download-huawei-gr5-mini-nougat-firmware/
Teddy Lo said:
I can't belived I posted back to you all the steps to unbrick your device also with pictures , but I don't see here ? Who knows , maybe is not alowed or a didn't Confirm a post . I will reply you later again .
---------- Post added at 03:43 PM ---------- Previous post was at 03:25 PM ----------
#1 Download Huawei Extractor and extract to one new folder on Desktop , for example "Huawei Firmware Extractor"
http://forum.xda-developers.com/attachment.php?attachmentid=3966156
#2 Download Update.zip and extract to one new folder on Desktop , for example "Huawei Update rom"
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1581/g104/v83821/f1/full/update.zip
#3 Run Huawei Extractor , locate to UPDATE.APP from extracted rom
and do exactly like this :
#4 Download and install Minimal ADB & FastBoot
https://forum.xda-developers.com/showthread.php?t=2317790
#5 Make sure your device is OFF , and press together Vol - and Power button in order to poot your phone in FastBoot mode
#6 Open Minimal Adb & FastBoot Command tool , and connect your device .
#7 Next steps is to write this command and drag your , recovery.img , boot.img and system .img in Command tool
fastboot flash recovery (drag your recovery.img) and press Enter
fastboot flash boot (drag your boot.img) and press Enter
fastboot flash system (drag your system.img) and press Enter
Once is Finish you can flash this full version
http://www.stechguide.com/download-huawei-gr5-mini-nougat-firmware/
Read more for better understanding.
http://www.stechguide.com/download-huawei-gr5-mini-nougat-firmware/
Click to expand...
Click to collapse
I am currently using this device.
It is not bricked.
Please help me to install twrp and root it.
Huawei GR5 mini. NMO-L31. EMUI 5.0
Huawei GR5 mini. NMO-L31. EMUI 5.0 /TWRP Recovery
A.Greninja said:
I am currently using this device.
It is not bricked.
Please help me to install twrp and root it.
Huawei GR5 mini. NMO-L31. EMUI 5.0
Click to expand...
Click to collapse
In order to install custom recovery you need to unlock your Bootloader , to do that follow instruction step by step.
https://www.youtube.com/watch?v=9ClbjG0ic4U
WARNING !!! I'm not responsible if you break your device or what ever , do at your own risk!
Good Luck
Sorry!
But the link you send me is for emui 4.0
But my one is emui 5.0
And I used this method but failed.
Note:I have unlocked my bootloader.
Try this one, and again do at your own risk!
How to Install TWRP Recovery Huawei GR5 2017 EMUI 5.0 | TWRP Recovery For Honor 6x Nougat 7.0
Search on yt with this tittle , other ways is to relax start searching .
No method is working.....
I'm so sad.
I lost every hope of rooting my device.
Who knows what to do?
A.Greninja said:
No method is working.....
I'm so sad.
I lost every hope of rooting my device.
Who knows what to do?
Click to expand...
Click to collapse
Try with this one https://www.gizdev.com/root-huawei-gr5-2017-emui-5-0-install-twrp/ :good: I wish you best of luck