[VERGE] New Amazfit Verge Firmware 3.2.2.0 - Amazfit

Firmware Version [Verge]: 3.2.2.0
- Alexa Smart assistent support (only Available in U.S)
- Answer your call from iphone on watch through bluetooth.
The features above require Amazfit Watch v2.8.1(iOS) / v2.7.0(Android) or higher
New Amazfit Watch App (iOS)
[For Amazfit Verge]
- Added suport for Amazon Alexa voice assistant (currently only support the U.S)
- Added Make and Answer a Call on iPhone
- Added support for Find Watch on App
- Added new watchfaces
[For Amazfit App]
- Added Heart Rate, Steps and Sleep data sync to apple Healthkit
- Fixed some bugs
Work's fine.

allanluppi said:
Firmware Version [Verge]: 3.2.2.0
- Alexa Smart assistent support (only Available in U.S)
- Answer your call from iphone on watch through bluetooth.
The features above require Amazfit Watch v2.8.1(iOS) / v2.7.0(Android) or higher
New Amazfit Watch App (iOS)
[For Amazfit Verge]
- Added suport for Amazon Alexa voice assistant (currently only support the U.S)
- Added Make and Answer a Call on iPhone
- Added support for Find Watch on App
- Added new watchfaces
[For Amazfit App]
- Added Heart Rate, Steps and Sleep data sync to apple Healthkit
- Fixed some bugs
Work's fine.
Click to expand...
Click to collapse
Anyone knoews where i can get the 2.7.0 version to download?

miracleman0 said:
Anyone knoews where i can get the 2.7.0 version to download?
Click to expand...
Click to collapse
it should be available from the playstore, sometimes Googles CDN takes some time to deploy it globally

1immortal said:
it should be available from the playstore, sometimes Googles CDN takes some time to deploy it globally
Click to expand...
Click to collapse
Yeah, taking too long, i want to play with it
Thanks

Alexa
Already available, I couldnt get it work Alexa on Android/watch

Hi,
On my iPhone with the new update I stopped receiving call notifications.

Has anyone noticed the battery life is lower?

laffsj said:
Has anyone noticed the battery life is lower?
Click to expand...
Click to collapse
Yes, from 5 full days and 20% still of battery (no seconds hans, planned AOD and DND on, double tap on, raise wrist off, auto brightness on) i barely do 3 days

kogan92 said:
Yes, from 5 full days and 20% still of battery (no seconds hans, planned AOD and DND on, double tap on, raise wrist off, auto brightness on) i barely do 3 days
Click to expand...
Click to collapse
Dropped from 4 - 5 days (about 20 - 30% still was did not drained) with the same usage and settings to 3 - 4 days (often with 20 - 30% only battery) and 2 - 3 days (with 30 - 40% battery):
1. heart rate always activated (continuous heart rate tracking), but often without manual measurement (after updates, before updates was several times manual measurement),
2. double tap activated from 9:00 to 00:00 (24:00),
3. wrist up/lock screen activated from 9:00 to 00:00 (24:00),
4. don't disturb activated from 00:00 (24:00) to 9:00, brightness full bright 100%, but with auto reacton in place light (light sensor activated),
5. sport modes (all) deactivated and never was started after factory reset of watch,
6. watch face is installed GreatFit for Verge 3.90 version (that's 3rd party watch face, but with my knowledge don't effect for battery life at all watch face, but for detail information i writing this information too)
7. notifications is getting without sounds, only vibration
8. no call from watch, no music listening from watch
9. widget is added only weather, all others is not added in watch (you can add two widget in Watch App, so added only one)
10. All others features like: campass, timer, as i mentioned music, sports modes and ect., wasn't used in these period of battery and often is not turning on at all.
11. Second hand activated
My usage:
Some notifications (notifications i getting from some apps like my sport supporting team, they are three), from Facebook's messanger (average more as 10, but less than 20), from Gmail (average 5 - 10 letters per day), message (sms) average to 20, call notification i getting average to 10, maybe a little bit more as 15. It's average statistic.
Most time it's just wearing and checking time. This is my average usage. Which is not so much, but and is not at all without usage
---------- Post added at 08:45 PM ---------- Previous post was at 08:35 PM ----------
miracleman0 said:
Anyone knoews where i can get the 2.7.0 version to download?
Click to expand...
Click to collapse
Watch App 2.7.0? Google Play https://play.google.com/store/apps/details?id=com.huami.watch.hmwatchmanager, if in Google Play there is no 2.7.0 version for yours device, you can find this version here - https://www.apkmirror.com/apk/huami/amazfit-watch/. If you will have trouble with installation process from ApkMirror web site post here

ngrb said:
Hi,
On my iPhone with the new update I stopped receiving call notifications.
Click to expand...
Click to collapse
same problem for me. Did you solve that?

Same problem.
After exchanging over 10 messages with the support of the Xiaomi, I found that they had no idea what to do to fix the problem. I'm totally disappointed with them. These days I received updete on application and xiaomi clock 3.2.3.0. The problem is still there. I hope someone soon finds a solution.
p.s After 2-3 restarts work fine.

Hi, I flashed the Verge 1801 with custom ROM 3.0.29.0, because of language) and everything worked fine. Than I decided to go with stock us/global ROM 3.2.2.0. Everything works for me again, except syncing data from watch to cloud/watch app.
It says:
Cannot verify access token
Please update Amazfit watch app to the latest version and try it again.
The same happened with any other ROM version I tried.
When I flash back to 3.0.29.0 everything works fine again.
Am I doing something wrong (pairing/unpairing...) Anybody had this issue solved?
Thanks,
Martin
Sent from my iPhone using Tapatalk

I don’t know how exactly, but sync thru wifi works now [emoji846]
Sent from my iPhone using Tapatalk

Related

Amazfit PACE - Original USA firmware - experiences

Here we can discuss everything about the original USA FW (1.3.4f ATM).
-=[ FIRMWARE v1.3.4f changelog: ]=- source: https://us.amazfit.com/blog/pace-update-october-2017
- Updated GPS firmware to v3.12
- Added countdown timer
- Tracking floors climbed through daily activities
- New backlight brightness level and mode settings
- Added support to control media playback on the phone
- Added "Night Run" and "Prototype Source" watchfaces
- Added auto-pause option for outdoor running and cycling
- Added support for high resolution mode in "I'm Runner" and "Night Run" watchfaces when wrist up is detected
- Optimized heart rate and sleep tracking algorithms
- Fixed inaccurate elevation output in certain sports types
- Improved real-time speed in outdoor cycling
- Fixed the issue of showing misaligned per mile marker and inaccurate pace when there's pause during an outdoor activity
- Optimized customized watchfaces
- Optimized system stability
- Other bug fixes
-=[ APP v1.7.4.2 changelog: ]=- source: https://us.amazfit.com/blog/pace-update-october-2017
- Added option to control music playback on the phone from Pace (Note: requires the latest Pace firmware)
- Support for timer widget reordering
- Optimized user login flow
- Updated algorithm lib to v1.1.09
Amazfit Watch app 1.5 is out!
After months of despair the Amazfit Watch app's update has appeared in the Play Store.
It has steps and sleep display with nice charts, so we're able to check our activity hourly, daily, weekly...
I hope Xiaomi / Huami will release a new FW for the USA version, because v1.3.2b is nice and stable, but lacks a few features of the Chinese FW, plus I had my first bug yesterday: after about 0.9 km of walk the watch displayed that I've accomplished half of the daily step goal, and the activity has restarted itself (so the watch hasn't rebooted), so I've lost the first third of my walk.
5tormChild said:
After months of despair the Amazfit Watch app's update has appeared in the Play Store.
It has steps and sleep display with nice charts, so we're able to check our activity hourly, daily, weekly...
I hope Xiaomi / Huami will release a new FW for the USA version, because v1.3.2b is nice and stable, but lacks a few features of the Chinese FW, plus I had my first bug yesterday: after about 0.9 km of walk the watch displayed that I've accomplished half of the daily step goal, and the activity has restarted itself (so the watch hasn't rebooted), so I've lost the first third of my walk.
Click to expand...
Click to collapse
Might as well go for the 1.6.0 dev version.
(Adds HR sync).
Waiting for new verson Amazfit app on IOS with step,sleep,hr...
Amazfit PACE FW 1.3.3a is out!
1.3.3a Release notes:
- Updated GPS firmware to v2.85
- Support .gpx import. Users can follow an imported route when running or biking and get alerts when deviating from the route
- Support activity data upload through WiFi
- Added "Daily Overview" widget to view users' daily activity in one place
- Show app list and provide access to all built-in apps on the watch
- Support weather info on customizable watchfaces
- Other bug fixes
(Thanks to Fco. Rafael Reyes for this awesome video!)
The digital watchfaces are working, but I'll share with you my experiences in a few days.
After a day: 1.3.3a seems to be faster than the 1.3.2b was. My experiences:
- Uploading data directly from the watch is so kewl - it just works!
- There is a battery icon on the 6 segments display besides the small clock.
- At the end of a session the finalizing is a lot faster, like it takes half of the time needed before.
- The battery life seems to be the same as it was before, so it's good.
- The digital watchfaces are working now.
- The GPS firmware is also new, so we'll see if it's more accurate or not.
I'll share my further experiences with you in a few days. I'll walk over 40 km during the weekend, so I'll have some more time testing the GPS.
Syncing problem with strava
I cannot just sync my activity to strava. It's so frustrating. Can anyone tell whether they have been able to see their activities on strava. I have tried all the methods logging in and out of strava again and again but it doesn't work.
pandot29 said:
I cannot just sync my activity to strava. It's so frustrating. Can anyone tell whether they have been able to see their activities on strava. I have tried all the methods logging in and out of strava again and again but it doesn't work.
Click to expand...
Click to collapse
Are you running the latest (1.3.3a) FW? Everything is fine for me, even uploading the data to Strava directly from my watch.
Maybe you should unpair your watch to see if pairing it again would solve your problem or not.
Syncing problem with strava
5tormChild said:
Are you running the latest (1.3.3a) FW? Everything is fine for me, even uploading the data to Strava directly from my watch.
Maybe you should unpair your watch to see if pairing it again would solve your problem or not.
Click to expand...
Click to collapse
Yeah I am now running 1.3.3a version but still not able to sync with strava, though I am using Google login in both that is amazfit and strava can it be a problem.
pandot29 said:
Yeah I am now running 1.3.3a version but still not able to sync with strava, though I am using Google login in both that is amazfit and strava can it be a problem.
Click to expand...
Click to collapse
I don't know, but try to log out from Amazfit and Strava, and log back in again.
If that doesn't help, try to unpair and re-pair your watch.
I've updated to 1.3.3a but can't see the "app list"
- Show app list and provide access to all built-in apps on the watch
Any ideas?
Hi,I have problem on Amazfit smartwatch, after last update 1.3.3a ,battery drain to fast about 7% per 1 hours. I did reset and unpair and without positiv result. Can somehow do a hard reset? Do not anyone have a similar problem? Before update was everything ok.
Thanks...
MirkoS said:
Hi,I have problem on Amazfit smartwatch, after last update 1.3.3a ,battery drain to fast about 7% per 1 hours. I did reset and unpair and without positiv result. Can somehow do a hard reset? Do not anyone have a similar problem? Before update was everything ok.
Thanks...
Click to expand...
Click to collapse
Did you try to completely turn off your watch and then back on?
I had this problem once with Redmi 3 phone. Restart didn't help but when I turned it off and then back on, the batter was OK.
Poslano sa mog Redmi 3 koristeći Tapatalk
I did a hard reset one of this days but the problem with mine is the battery goes like 50%in 6 hours but only if I turn off the Bluetooth of the phone . Otherwise it's OK .
Anyone else?
Enviado do meu SM-G850F através de Tapatalk
I tried it several times and without result, battery 1% per 10min down ...
Same issue here...
Battery drain and GPS speed/pace does not update on watch face with accurate numbers during workout.
Did any of you try to contact Huami US support? I don't know if they answer e-mails but there's no harm in trying...
Poslano sa mog Redmi 3 koristeći Tapatalk
They don't answer unfortunately
Stuck on updating page for 4 days now
Hi, I was on 1.3.2b and received a notification to update 1.3.3. So I went and update the watch, and the watch has now been stuck on the updating Please do not power off the watch for the last 4 days. What happen was 2 days ago the battery went flat, so I plugged it into the charger it boots up and proceed with the updating process again but still stuck when it finally reaches the end. Any help would be highly appreciated. Thanks!

Downloaded Watch Face is not showing up on Android Wear

Ever since I got the most software update earlier July 2017 on my Zenwatch 2, my Zenwatch 2's battery is horrible, it barely last 10 hours with a little usage with brightness set to lowest. I did factory reset hope to fix the issue, after I did factory reset I was trying to download my watch face back to my watch, I noticed it is not showing up at all so I try download any other watch faces and none of it are showing on the Android Wear app. Currently I am stuck using only stock watch faces. Anyone else having similar issue?
You have to add the custom watch faces in face designer on the watch. Swipe left and tap add more watch faces at the right hand end of the list of watch faces. You need to also have the custom watch face app or apps installed on both your phone and watch.
You will need to go into your play store on the watch and add the custom face apps to the watch. You should see any app that is on your phone and which has a complimentary watch app in the list at the bottom of the scroll called apps on your phone.
autosurgeon said:
You have to add the custom watch faces in face designer on the watch. Swipe left and tap add more watch faces at the right hand end of the list of watch faces. You need to also have the custom watch face app or apps installed on both your phone and watch.
You will need to go into your play store on the watch and add the custom face apps to the watch. You should see any app that is on your phone and which has a complimentary watch app in the list at the bottom of the scroll called apps on your phone.
Click to expand...
Click to collapse
I did do that, before the new update any watch faces I download show up in the Android Wear app, right now none of the custom watch faces I download are showing in Android Wear.
They won't. It works a bit different now. You have to use the app that comes with each one to manage them and then add them to your watch as I detailed.
Read a better explanation at the provided link. https://support.google.com/androidwear/answer/6140435?hl=en
autosurgeon said:
They won't. It works a bit different now. You have to use the app that comes with each one to manage them and then add them to your watch as I detailed.
Read a better explanation at the provided link. https://support.google.com/androidwear/answer/6140435?hl=en
Click to expand...
Click to collapse
I noticed only the watch faces I download directly from the Watch's Play store showed up on my watch and my Android Wear app, but any watch faces I download from Play store on my phone is not showing up on neither my watch or Android Wear, so base on what I found out is that if any of my previous purchase of watch faces didn't found on the app store on my watch that basically mean it is not supported in the latest version of Android Wear.
That could bead well. Just like anything the app developer has to update his or her app to work with aw 2.0
henban89 said:
I noticed only the watch faces I download directly from the Watch's Play store showed up on my watch and my Android Wear app, but any watch faces I download from Play store on my phone is not showing up on neither my watch or Android Wear, so base on what I found out is that if any of my previous purchase of watch faces didn't found on the app store on my watch that basically mean it is not supported in the latest version of Android Wear.
Click to expand...
Click to collapse
You must go on the "PlayStore" app on YOUR watch and look at the section "app from phone" to install faces/apps wich is yet on your phone. With Wear 2, phone faces/apps are not automatically installed on the watch. Users must install all or only the one they want.
dersie said:
You must go on the "PlayStore" app on YOUR watch and look at the section "app from phone" to install faces/apps wich is yet on your phone. With Wear 2, phone faces/apps are not automatically installed on the watch. Users must install all or only the one they want.
Click to expand...
Click to collapse
If that the case then I will say I HATE this update, it used to be so easier if I want to download watch face on my watch I can download on my phone Play Store then it will automatically add to my watch. Also I quite sure new update rendered my Zenwatch's battery unusable, my battery drop 100% to 5% within 10 hours, I used to get to able through almost 2 full days without charging it.
Have you performed a factory reset on the watch?
autosurgeon said:
Have you performed a factory reset on the watch?
Click to expand...
Click to collapse
Yes, twin already. Didn't helped for now I am force to turned off ambient mode and set brightness to lowest just get watch with usable battery life again though still no luck getting back the watch face "LED Time" I purchased download to my watch. I am currently addressing this issue to the developer who made that face watch so hopefully that issue can be fixed from the developer who design the watch face. I am extremely irritated with new update that screw up my watch. By the way trying find watch face on my watch by typing in name with small tiny screen was fun! (sarcasm). I wish someone would make those developers who released the latest Android Wear update to type on their Smartwatch with their life depend on it.
Turn off automatic wifi as that uses lots of power and likely you did not have that turned on with 1.5
My battery life was pretty bad for a few days after the update, but once I let it run down completely and die, then charge to 100% it was back to normal.
neezy13 said:
My battery life was pretty bad for a few days after the update, but once I let it run down completely and die, then charge to 100% it was back to normal.
Click to expand...
Click to collapse
I hope that is the case, I charge my watch to 100% took it off the charger around 1pm by 11pm my battery life down to 5%. Since I turn ambient mode off battery seen to getting better even though I previously had ambient turn on the entire time before the update and my watch managed to last almost 2 full days.
autosurgeon said:
Turn off automatic wifi as that uses lots of power and likely you did not have that turned on with 1.5
Click to expand...
Click to collapse
Actually I did have my wifi turn on as well as ambient turn on before 2.0 update. that was my setting and it lasts me almost 2 days. I don't use my watch to make call or send text message, I mainly use it just to check a few notification though out the day and obviously to tell time so I don't have heavy usage on it.
The latest update to the Android Wear app on your phone.should allow watch face modding and changes once again from the app.

Pixel 3 - improve battery life

Opening this thread because battery life could be better even though it's only ~2950mAh. Currently I'm getting a bettery life of 20h with moderate usage. So I started to gather infos about how to reduce battery drain and usage.
Improvements:
- AlwaysOnDisplay: off
- Playing now: off
- reduce brightness
Are there any Google APPs which can be safely deactivated without getting the phone lunatic nor have heavy impact on the system?
And why is the Google APP so large? On my Moto G5+ it was around 35MB and now it's ten times bigger?
TGHH said:
Opening this thread because battery life could be better even though it's only ~2950mAh. Currently I'm getting a bettery life of 20h with moderate usage. So I started to gather infos about how to reduce battery drain and usage.
Improvements:
- AlwaysOnDisplay: off
- Playing now: off
- reduce brightness
Are there any Google APPs which can be safely deactivated without getting the phone lunatic nor have heavy impact on the system?
And why is the Google APP so large? On my Moto G5+ it was around 35MB and now it's ten times bigger?
Click to expand...
Click to collapse
I wondered the same as you before receiving my Pixel 3. Comjing from a Galaxy S8 battery / SoT was always an issue, I barely made it trough a whole day of work without recharging at 5 PM.
With the Pixel 3 I did the following:
- Set it up and migrate everything from the S8 (via the Assistant in the Setup screen)
- Restored my ringtones and Notification sounds
- disabled the following Apps (because I don't use them): Action Services, Android Auto, Chrome, Connectivity Health Services, Device Health Services, Device Policy, Gmail (I use Aquamail instead), Google Connectivity Services, Google Play Movies, Google Play Music, Google Suport Services, Live Transcribe, Pixel Ambient Services, Youtube (I prefer Youtube Vanced and MigroG instead)
- Set up a ton of Cal and Carddav Accounts for my personal cloud services
- Disabled the automativ battery saver (which would kick in at 15% by default)
- Set up Automate: toogle WiFi on automatically when I reach a specific location (I know this is build in, but with the build in version it doesn't switch of when I leave the location) and disable it when I leave, Disable Bluetooth when not in use for 5 Minutes, automatically activate DnD when I'm charging after a specific Time (I charge every night) and disable it when I remove it from the Qi Charger
That's what I set up because of my experience with the S8 and because I want most things automatically done.
Yesterday I pushed the phone to the limit (a whole workday plus 2 Hours Spotify and 3 Hours Gaming):
imagebanana.com/s/1383/8vZEWmFF.html
P.S.:Sorry for the broken Link, just copy the Link into your webbrowser. I lost my old account and had to set up a new one, where I will be allowed to post links after 10 Posts
TGHH said:
Opening this thread because battery life could be better even though it's only ~2950mAh. Currently I'm getting a bettery life of 20h with moderate usage. So I started to gather infos about how to reduce battery drain and usage.
Click to expand...
Click to collapse
Why don't just turn on Battery Saver? It shuts down some functions, like instant response for "Hey Google", idles background running apps etc. It also switches on dark theme at least in settings. I didn't measure exact battery life, but it feels, it lives longer. However, there were some days (I think, once in a couple months) when the battery drained almost in half in literally some hours. Since I registered it aftermath, I can not recall what could lead to that, but since I live in Los Angeles with some areas of pretty bad coverage (in hills areas, on some freeways), it's possible those caused the drainage. Also it could be the result of some glitches that Pixel is famous for, so I just rebooted it and it stopped drain the battery for that reason or because I was already out of bad coverage areas.
Since it's still April, don't forget about secret Google's signals to control all its gadgets and their owners.
Unlock
Root
Elemental kernel
Substratum swift black theme
Profit
TimLux said:
I wondered the same as you before receiving my Pixel 3. Comjing from a Galaxy S8 battery / SoT was always an issue, I barely made it trough a whole day of work without recharging at 5 PM.
With the Pixel 3 I did the following:
- Set it up and migrate everything from the S8 (via the Assistant in the Setup screen)
- Restored my ringtones and Notification sounds
- disabled the following Apps (because I don't use them): Action Services, Android Auto, Chrome, Connectivity Health Services, Device Health Services, Device Policy, Gmail (I use Aquamail instead), Google Connectivity Services, Google Play Movies, Google Play Music, Google Suport Services, Live Transcribe, Pixel Ambient Services, Youtube (I prefer Youtube Vanced and MigroG instead)
- Set up a ton of Cal and Carddav Accounts for my personal cloud services
- Disabled the automativ battery saver (which would kick in at 15% by default)
- Set up Automate: toogle WiFi on automatically when I reach a specific location (I know this is build in, but with the build in version it doesn't switch of when I leave the location) and disable it when I leave, Disable Bluetooth when not in use for 5 Minutes, automatically activate DnD when I'm charging after a specific Time (I charge every night) and disable it when I remove it from the Qi Charger
That's what I set up because of my experience with the S8 and because I want most things automatically done.
Yesterday I pushed the phone to the limit (a whole workday plus 2 Hours Spotify and 3 Hours Gaming):
imagebanana.com/s/1383/8vZEWmFF.html
P.S.:Sorry for the broken Link, just copy the Link into your webbrowser. I lost my old account and had to set up a new one, where I will be allowed to post links after 10 Posts
Click to expand...
Click to collapse
Your setup of apps and syncing is very close to mine! Some of the services you mentioned are still running on my Pixel. That's a good starting point for further optimisation. Very appreciate your help!
Che Kirila said:
Why don't just turn on Battery Saver? It shuts down some functions, like instant response for "Hey Google", idles background running apps etc. It also switches on dark theme at least in settings. I didn't measure exact battery life, but it feels, it lives longer. However, there were some days (I think, once in a couple months) when......
Since it's still April, don't forget about secret Google's signals to control all its gadgets and their owners.
Click to expand...
Click to collapse
I applied already the standards for saving battery life (AoD, etc.) and as I don't use the Google services also those I was sure it doesn't break anything. Getting rid of the services I don't use is a good start for optimise it.
b1337 said:
Unlock
Root
Elemental kernel
Substratum swift black theme
Profit
Click to expand...
Click to collapse
Unlock and root will come by time but for now I keep it locked. ??
TGHH said:
Unlock and root will come by time but for now I keep it locked.
Click to expand...
Click to collapse
literally no point but ok
b1337 said:
literally no point but ok
Click to expand...
Click to collapse
Yes, it is. Loosing warranty.
Never had a problem with this since Nexus one
b1337 said:
Never had a problem with this since Nexus one
Click to expand...
Click to collapse
Well, it's not about the process of unlocking and rooting the phone, but just the legal side.
I would not get any service for free if I unlocked it.
I rooted every phone I had but as my Pixel is new I will wait till I'm sure that there are no hardware problems occurring.
TGHH said:
I applied already the standards for saving battery life (AoD, etc.) and as I don't use the Google services also those I was sure it doesn't break anything. Getting rid of the services I don't use is a good start for optimise it.
Click to expand...
Click to collapse
Do you mean you applied that after special mode "Battery Saver" as additions to it? That standard mode was enough for me to keep my battery charge mostly over 50% after full day.
Che Kirila said:
Do you mean you applied that after special mode "Battery Saver" as additions to it? That standard mode was enough for me to keep my battery charge mostly over 50% after full day.
Click to expand...
Click to collapse
Yep, that's what I ment. I identified already one of the drainers - my Openvpn client is consuming quite a lot. After switching to Blockada (as AdBlocker) battery consumption is quite okay.
But let's see what can be achieved by further optimization.
Try to use the private DNS setting instead, I figured this would save even more battery than a locally hosted VPN
TimLux said:
Try to use the private DNS setting instead, I figured this would save even more battery than a locally hosted VPN
Click to expand...
Click to collapse
I will try, but one after the other. Otherwise I don't know what was a good setting.
Seems like I found descent settings to make battery last longer. So let's see how this turns out during the week (this is my normal use case - mail, some music, business stuff, photos; I don't play!).
I'll let u know what I did, so maybe others can profit as well.
While in standby/mails/some browsing the drain is descent. While listening to some music using BT the drain is quite visible as you can see.
What?? When you use the device it uses more battery then when it sleeps? crazy
b1337 said:
What?? When you use the device it uses more battery then when it sleeps? crazy
Click to expand...
Click to collapse
LOL - sorry, maybe misleading. Yes, I used it for reading mail, some websites. So maybe I should have written moderate use.
b1337 said:
Unlock
Root
Elemental kernel
Substratum swift black theme
Profit
Click to expand...
Click to collapse
Which CPU mode do you use? I typically use "on demand"

Amazfit GTR 47mm - notifications are not available.

Hello,
I knew that this kind of subject have been posted here few times, I've checked each of them and tried to make steps that have been showed in answers on my device. Unfortunately nothing have worked.
I will try to describe the issue with all possible steps that I've made before posting this subject.
1. I've received an Amazfit GTR 47 mm yesterday, I'm using an iPhone 7 (iOS ver. 13) — everything looks fine, no pairing problem via amazfit app, but when I've tried to check the notifications I saw that. I can only see when someone is calling me and if the alarm is on. WhatsApp, Facebook, SMS doesn't work.
2. All the notifications in the app (tried on amazfir and mifit (was using miband 3 before the watch)) and on phone are on — like they were while i used the band (with shown all the notifications on it).
3. I've tried to pair the watch with second phone based on android - of course everything works fine ( made the factory reset etc)
4. I've deleted the watch and app from android phone, again factory reset, installed the app on iPhone, restarted the iPhone, added the watch as a new one - and still nothing.
i dont have any idea what can i do... if You need and it will help i can make a hundred of screenshots with my settings.
Mine is the same. I'm on IOS 13.2 Beta and I no longer get SMS or phone call notifications. It works fine on Android. I am waiting for the next update so I can go back to a stock IOS 13. Hopefully this will fix it though not holding my breath.
FYI I was having SMS notifications issues with my Garmin Vivoactive 3 as well.
Same here! Doesn’t work on iOS 13!
hi,
I have a iphone, 13.2 beta rom and the solution for your problem, that I found is:
- first you must be loged in amazfit app
- then go to Iphone>Bluetooth>Amazfit GTR> Share system notifications
- there you must turn off, and the turn on, the button for share system notifications, to restart the notification protocol
Everytime you close the app amazfit or reboot the system, you must do this procedure.
I don't know if in the next 13.2 iOS public release the behavior will be the same, but this way we can fix this anoying bug.
Serq071 said:
Hello,
I knew that this kind of subject have been posted here few times, I've checked each of them and tried to make steps that have been showed in answers on my device. Unfortunately nothing have worked.
I will try to describe the issue with all possible steps that I've made before posting this subject.
1. I've received an Amazfit GTR 47 mm yesterday, I'm using an iPhone 7 (iOS ver. 13) — everything looks fine, no pairing problem via amazfit app, but when I've tried to check the notifications I saw that. I can only see when someone is calling me and if the alarm is on. WhatsApp, Facebook, SMS doesn't work.
2. All the notifications in the app (tried on amazfir and mifit (was using miband 3 before the watch)) and on phone are on — like they were while i used the band (with shown all the notifications on it).
3. I've tried to pair the watch with second phone based on android - of course everything works fine ( made the factory reset etc)
4. I've deleted the watch and app from android phone, again factory reset, installed the app on iPhone, restarted the iPhone, added the watch as a new one - and still nothing.
i dont have any idea what can i do... if You need and it will help i can make a hundred of screenshots with my settings.
Click to expand...
Click to collapse
unpair the watch
uninstall amazfit app and install the app again.
before connecting the watch give all the permissions and then connect.
I've done that, but not have fixed. For me is worst, because i've bougth a Mi 9t 128 G and i have an Amazfit GTR. Some one have any information if Android 10 block this?.
Same here. None of the suggestions worked for me...

Stratos stopped to sync with Amazfit app

Hi, I own this watch for 2 weeks now and everything was working fine until the day before yesterday, I opened Amazfit app w/o Internet connection (was not aware at the time, automatic task) so I was kicked out from app and been asked to relogin, cool I did so and then my data been wiped: no steps, no sleep, no HR, weight was all that left (and the only thing that is still working).
So I tried to reboot both watch and phone (Xiaomi Mi6), no luck, also tried to let it be and see the other day, no luck, now it is 3rd day when I am keep seeing no data is going through.
I tried to force manual sync on the watch in Settings that went just fine with successful message after 100%, in the end I unpaired watch (factory reset), still no luck.
Someone told me me to try N&F app and it does read all the data, so how come official app does not, any ideas?
BTW: from time to time Amazfit app shows me that there is not connected devices and when I go to my profile under Amazfit Stratos it shows "Not activated". I activate it every time it says not activated, but it changes nothing about data.
Hello bro, got same problem, Amazfit app stopped syncing activities for few days now. However it's syncings steps properly. Can't work it out, hope someone will help us.
hello, sometimes this happens when there are problems with servers from Xiaomi. That is why there are problems with synchronization and downloading weather data. Usually it lasts from several hours to several days, it is not a continuous problem, There are also problems logging in to the Xiaomi account. I recommend patience and wait a few days.
Wysłane z mojego MI 8 Explorer Edition przy użyciu Tapatalka
I hope so, but when servers are down or something is wrong with them it should not work for everyone and not just one person I believe.
I am worried because I have been using huami bands for years now and nothing like this has happened in the past (in MiFit app).
It's been a week now, is official app really that bad? On day 1, 2 and 3 I was able to force sync watch from it's settings (of course I was getting nothing in app anyway), then I could not even manually sync it to amazfit servers.
All this time I'm also using Notify & Fitness for Amazfit to store my data (which works fine)..
Same here... when synchronization works, then Strava upload doesnt work. Now Strava work, but synchro with app doesnt. xD
Waiting for Xiaomi respond.
Hi, same problem for me on iOS 13.2 with the last amazfit app 3.4.5
all my sleep, step, heart are synchronized, but all my sport activities won't be synchronized.
i just create a ticket to support.
when i try to force "sync data" on different wireless network, i still have "error, verify your network"
after delete/resintall app on my iphone, i loose all my sport activities on iphone, but, i still have it on my watch. (i just backup my watch!)
[email protected] said:
Hi, same problem for me on iOS 13.2 with the last amazfit app 3.4.5
all my sleep, step, heart are synchronized, but all my sport activities won't be synchronized.
i just create a ticket to support.
when i try to force "sync data" on different wireless network, i still have "error, verify your network"
after delete/resintall app on my iphone, i loose all my sport activities on iphone, but, i still have it on my watch. (i just backup my watch!)
Click to expand...
Click to collapse
Same issue for me, on 25th October all activity information on the Amazfit App has stopped being shown. A few days later the same is also true with the step graphics information. I'm running iOS 13.2.2 and the Amazfit App 3.4.5. What is weird is that the information is being sent to Strava and also being held by Apple Health. Just nothing is being shown on the Amazfit iOS App. Sleep, heart rate are all working OK, it is just that I have not record of steps taken over the day when you click on the Walking Man icon (which takes you to the Steps screen) or any activities logged such as running or walking. Up until now I have been very impressed with the Stratos watch and the APP. Does anyone have a recommended fix yet? Watch has the latest firmware installed. Thx
Same issue for me.....
JoeW99 said:
Same issue for me, on 25th October all activity information on the Amazfit App has stopped being shown. A few days later the same is also true with the step graphics information. I'm running iOS 13.2.2 and the Amazfit App 3.4.5. What is weird is that the information is being sent to Strava and also being held by Apple Health. Just nothing is being shown on the Amazfit iOS App. Sleep, heart rate are all working OK, it is just that I have not record of steps taken over the day when you click on the Walking Man icon (which takes you to the Steps screen) or any activities logged such as running or walking. Up until now I have been very impressed with the Stratos watch and the APP. Does anyone have a recommended fix yet? Watch has the latest firmware installed. Thx
Click to expand...
Click to collapse
Hi,
in fact, i resolve my problem alone (thanks amazfit support :mad : )
Before all, i backup all my watch (with AmazeBKP_v1.2)
IMPORTANT, put the watch in airplane if you don't want loosing all your sport activity into the watch.
i'll explain what i do:
1. put the watch in airplane
2. try to see if the watch is connected to amazfit app, normally no, because it is in airplane.
3. if you don"t see the watch, go to amazfit app, and remove the watch from your account.
4. log off from amazfit app
5. Remove the app
6. reinstall the app !
7. logon with your account
8. add the watch ! ... now, for adding a watch to amazfit you need a QR Code... but, if you want a QR Code, you need to reset your watch ! nooooooooooooooooo !!!!!
open a cmd, go in a folder where there are adb (personnally i use adb from amazeBKP), and type: adb shell am start -n com.huami.watch.setupwizard/.InitPairQRActivity
9. the watch QR code appear, you can add it in your amazfit account.
10. force synchronize data from the watch (need wifi)
11. wait a few minute
With this step my amazfit app work again, and i retreive my 179 Sport session ! OUF !!!
For your information if you don't put the watch in airplane first, when you will remove the watch from your account, the watch will be reset automatically and you loose all !!!
Regards
Everything seems to be fixed by Amazfit!!! Activities are now synchronized!!!
Not for everyone, not for me at least.
Nitter78 said:
Everything seems to be fixed by Amazfit!!! Activities are now synchronized!!!
Click to expand...
Click to collapse
From today for me, sync working too.
In my case I cannot sync sport activities without doing a manual upload first. Amazfit app stays at 10% for more than a minute and then the message disappears.
Anyone else had this problem?
BTW, using a Stratos 3 with 4.2.2.1 ROM
theopulus said:
In my case I cannot sync sport activities without doing a manual upload first. Amazfit app stays at 10% for more than a minute and then the message disappears.
Anyone else had this problem?
BTW, using a Stratos 3 with 4.2.2.1 ROM
Click to expand...
Click to collapse
Yes, same problem here.
Tried for few times to unpair/pair, reinstall app, but last activity is from 17.11, although I have 3 more... reported the issue through the app few times and got back thanks from customer service but nothing else happens.
BTW, how do you upload manually? Thanks.
---------- Post added at 10:15 AM ---------- Previous post was at 10:12 AM ----------
intrak said:
From today for me, sync working too.
Click to expand...
Click to collapse
For how long has been it failing? Almost one week for me, don't know what to do or if it will fix automatically after X days...
Getting annoyed.
Thanks.
3 weeks for me and still counting... I have this watch for 4 weeks, so it does not work 90% of the time.
Yesterday after unpair/pair and removing the app worked for a while and workout form yesterday was sync ok, but today again nothing happens...
Yes only manual sync is working(using WiFi)
Go in sync menu from watch then manual sync.
Only with this I have my workout.
Don't know if the pb is from the watch or app
winni21 said:
Yes only manual sync is working(using WiFi)
Go in sync menu from watch then manual sync.
Only with this I have my workout.
Don't know if the pb is from the watch or app
Click to expand...
Click to collapse
The bad news is Ultra Mode doesn't have manual sync, so if you use it and there is a workout not syncing, you lose it.
theopulus said:
The bad news is Ultra Mode doesn't have manual sync, so if you use it and there is a workout not syncing, you lose it.
Click to expand...
Click to collapse
The workout you're doing in ultra mode are not visible in normal mode?

Categories

Resources