Flashing 6.0 ROM black screens - Elephone P9000 Questions & Answers

Hey so at one point I bricked my P9000 by flashing recovery then I got it back with meta-mode. The only ROM I could get to flash in meta was 170904 which is a 7.1 ROM.
You guys have any idea why when I flash 6.0 isn't bootable? Does the preloader need a wipe? I wasn't able to get meta to take the 6 preloader and boot it, even with other versions of 6... advice? experience with downgrading? anything?
I'd stick with 170904 if the friggin thing didn't have so many problems with internet connectivity, I feel like I'm restarting the thing every other minute getting it to stay connected.
I've tried flashing 160224 & 160315. I've been looking for 0810 but can't find an active link. (all of which are 6.0 roms)

Related

[Q] Rooting Help

I I rooted my phone and honestly im new to all this. I installed a new lollipop rom released by Oneplus on my oneplus one today, and after not too long got tired of the bugs and my service constantly crashing, so i tried to re install the original ROM but i messed up. Now im stuck in fastboot and my computer discovers the device but i have no os and no recovery mode, any flashing i try to do on fastboot results in a FAILED<COMMAND WRITE FAILED <INVALID ARGUMENT>> PLEASE HELP

Stuck at Galaxy Edge boot screen

Hi guys! Can you help me please? I'm having the worst time.
After flashing any rom posted here, when I reboot I can't get pass from the boot screen. I tried so many roms and nothing, the only rom that actually boots is the CM Rom, but it is so instable that if the screen is turned off, I can't turn it on again.
Also I tried flashing stock rom, but Odin gives me error .
So I'm really desperate, what can I do, its been two days of trying and trying
I'm also having this same problem, it only starts with ROM CM

Lenovo Tab3 (TB3-710I) bricked!

Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
flagpol said:
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
Click to expand...
Click to collapse
Do you find the solution yet? Cause I face the same problem too..
Tzul please help.. :crying:
me too, please help
similar issue, cant power on, keep on vibrate loop interval, no display, not detected by pc
flagpol said:
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
Click to expand...
Click to collapse
Hi, did you find anything?
I have three TB3-710l (they are the company I work for), I have successfully root 2 of them but the newest tablet doesn't have the same luck.
First I install TWRP by Tzul, but the TWRP have an error never mount anything.
Second I try to flash stock firmware (Lenovo_Tab_3_TB3-710I_MT6580_S000032_160921) then the same happened, never turn on and just vibrates.
Always using SPFT, and now I have the same problem has you: always shows that it cannot load DRAM (4032 error or 0xFC0 error).
EDIT: Hi, for everyone who get in here with this problem, please read all this thread.
I unbrick my tablet with this answer in specific.
Good Luck!
asdrubalsantander said:
Hi, did you find anything?
I have three TB3-710l (they are the company I work for), I have successfully root 2 of them but the newest tablet doesn't have the same luck.
First I install TWRP by Tzul, but the TWRP have an error never mount anything.
Second I try to flash stock firmware (Lenovo_Tab_3_TB3-710I_MT6580_S000032_160921) then the same happened, never turn on and just vibrates.
Always using SPFT, and now I have the same problem has you: always shows that it cannot load DRAM (4032 error or 0xFC0 error).
EDIT: Hi, for everyone who get in here with this problem, please read all this thread.
I unbrick my tablet with this answer in specific.
Good Luck!
Click to expand...
Click to collapse
THis might WOrk i ve havent tried yet ,tho i wanna flash it now
https://forum.xda-developers.com/android/development/tb3-710i-tb3-710f-rom-stock-rom-lenovo-t3437810
same problem faced,can any developer please help us

umi device detected as cmi by TWRP

Hi, I'm trying to flash miui 12 or 12.5 into my mi 10 because my carrier never bothered beyond 11.6.0.
I've followed some tutorial here at XDA and when trying to install a umi rom, it gives me error 7 and tells me my device is cmi and the rom is meant for umi. I've tried several different roms with no success. I also tried flashing a cmi rom but it doesn't boot, since TWRP detected the device as such, but after a successful installation, it will not boot properly, it gets stuck at MI screen and restarts over and over.
Any help would be much appreciated.
Edit: I managed to solve it by redoing everything from scratch (at lease form where I was able to, since my phone was unable to boot Android).

ASUS_X01AD not working properly after flashing custom ROM

Thank you for reading this thread.
Dear XDA members,
I tried rooting my device "ASUS_X01AD" 3days ago. But somehow i failed and brick my phone.
Googled a way to unbrick and manage to boot it back but it was not my original ROM.
So i tried download other Custom ROM and Stock ROM,
Pixel Exp (Flashed and stuck in bootloop (not fastboot loop)
Havoc (Failed to flash)
Cherish OS (Flashed and stuck in bootloop (not fastboot loop)
After that i use this (https://www.asus.com/my/mobile/phones/zenfone/zenfone-max-m2/helpdesk_bios/)
But after that i notice i have some problem with it, IMEI unknown and without android 10 update the device wont get wifi turn on.
Im not sure if i did any wrong in following guides, But please help me with my favourite device.
Almost all guides i already follow in XDA threads but maybe i miss some steps,
Also try to enable diag *#3424#* but my pc wont detect unless i boot it up with Volume + & - qualqom usb will detect but still i cant use qfil qcn restorer option
The reason why i want to root it because i want to recover my internal storage data with data recovery.
Been using this device 5 years ago .
Thank you again for reading my thread.

Categories

Resources