Hello and Servus,
I recently got a Homtom from my neighboor to look at because its full of bloatsoftware and seems to have battery issuses.
First I tried to install TWRP by this guide "https://romprovider.com/2018/10/homtom-zoji-z7-root/" and this one "https://www.getdroidtips.com/twrp-recovery-zoji-z7/"
I was able to "install" twrp using adb but I was stucked in a bootloop after this, couldnt even get to recovery /twrp, so I tried my way with the Smart Phone Flash Tool.
Some problems where persistent and I couldnt connect my phone with the tool until I had to format it via.
After formating the phone and installing the stock rom I got from here "https://rootmygalaxy.net/stock-rom-on-zoji-z7-official-firmware/" I am now stuck even worse. I dont even have a bootloop, the phone just starts and goes off.
Even worse was it, after I tried to flash to a "higher" version I got from this post "https://forum.xda-developers.com/general/general/zoji-z7-4g-smartphone-t3613364" - I just got a display bug and couldn't do anything, so I flashed the stock rom again.
Right now the only thing that works is fastboot. If I try to boot it in recovery or else it just goes off.
Is there someone who can help me there ?
Related
I've just bought an Oppo phone (with MTK6589 chipset.) 2 days ago I decided to root and flash CWM recovery to my phone. Rooting gone well and the phone is now rooted. Then I flashed CWM with Mobile Uncle Tool. It said that I flashed sucessfully, I got no error. But when I reboot the phone to recovery mode, nothing happend, the phone just did a normal reboot! I tried to flash other third-party recovery mode such as TWRP and MIUI recovery but I got the same problem: the phone couldn't get into recovery. The screen with a text "Recovery mode" appeared in 3s and the phone just did a normal reboot. I couldn't even format factory, all I got was just a normal reboot. I even tried many tools on Google Play and MTK flashtool but there were no hope.
Now my phone is working normally but can't get into recovery mode. Please help me.
Please help me. I've search over the Internet for my problem but it seems that no one have the same one.
Plz guy I can't take it back to the store.
I also have the same issue of not getting into recovery mode
Restarts only in recovery mode
Is there any solution for this
Hi,
A friend has a brand new Redmi Note 2 and after few hours the phone been bricked, so I flash by following this tuto > en.miui. dot .com/thread-187696-1-1.html
It works !
2 weeks later the phone bootloop again, so we followed this tuto again but didn't worked. It was pretty hard to access the Flashboot menu, seems the vol buttons were not working. Sometimes we reached the boot menu, but the phone was freezing on the menu and booted again.
Finally I reached the flashboot, I wiped it successfully !
But nope, the phone is still bootlooping.
Any ideas ? Of course today he tried to go to the shop, but the "professional" said him he never heard about this brand and this problem, so he can't fix it...
Cheers
Use Flash Tool and flash Recovery again
I've flash again and still bootlooping ..
I can't access the storage part on the phone.
Is it possible to put a rom custom ?
The phone try to load something but still loading ...
Have you try a full wipe that means that all data is deleted ? What Firmware have you installed ? What Recovery is on your phone ?
Hello everybody, My father's old S2 was running well till today, then suddenly it didn't wake up. Tried restarting and got a kernel panic. Then, nothing. The phone stucks on the I9100 logo or sometimes tries to boot, but it's stuck. It DOESN'T enter recovery mode, only download one. I was running a modded Nougat or Marshmallow ROM, and I've found a soft-brick/NAND RW corruption thread here:
https://forum.xda-developers.com/galaxy-s2/help/guide-fix-unflashable-soft-bricked-gsii-t1457458
It's quite old and I don't know if it works, it refers to the old ICS, and, since I don't want to mess up things more than this, I prefer to ask you if someone has some other recent discussions or solutions for me.
Thank you so much in advance!
Guys can someone please help me? I tried that guide but I can't enter recovery mode, I tried flashing the CMW recovery with ODIN and it always get stuck on "NAND write start!". There is no chance to revive the phone? I can't flash a ROM with ODIN too, it gets stuck at the same point..
Also had the issue once that my device suddenly wouldn't boot up anymore. Also recovery didn't work. I fixed by flashing another recovery via Odin in download mode.
Did take quite long though until I finally succeeded, because at some recovery flashes Odin wouldn't pass 'NAND write start' or something. I tried with different recoveries and USB ports and somehow managed to get it working again. Then I wiped data, cache, system and reinstalled the ROM and Gapps.
Hope this helps.
Hi guys, i need help.
was using my phone this morning and suddenly it restarted itself.
the phone passed through boot icon and went to "almost" into launcher screen.
my phone is rooted and thought that it might be due to software, hence i flashed stock firmware into it.
so now it is in stock rom and stock recovery.
but the phone still restarts.
it will still pass through the boot icon and since it is fresh installed, it goes to the setup screen, but from the the phone restarts again.
it seems like it restarts everytime it finish boot.
thinking that it might be screen issue, so i go into (stock)recovery mode, i try to navigate around in it by going to wipe phone, install from storage, and the phone doesnt restart.
please advise what might be the cause or issue since i had already flashed stock rom, so i guess rom isnt a problem, and phone doesnt restart when it is in recovery mode...
Hello! I posted on the official forum for Blackview but so far I haven't gotten a response. TL;DR, my phone, a Blackview BV5800 PRO, could not boot up (stuck on logo) and using recovery mode doesn't work. I get mounting issues when I try to factory reset, wiping the partition cache, and even mounting it (an option).
So my last resort was to attempt to re-flash the ROM using the provided ROM file by the OEM, which they did have on their forum. The first time around when I downloaded the ROM plus the SP Flash Tool, followed the instructions and all, it appears to be flashing just fine. As soon as it finished with the checkmark on screen, the phone is stuck in a black screen and Windows keeps detecting the device over and over, but nothing happens on the phone. From my research online, this is a feature of all MediaTek devices in an attempt to restore a factory ROM.
Now, when I try to flash again with the SP Flash Tool with the same ROM, I am getting a "STATUS_DA_HASH_MISMATCH" error. Or sometimes i get the "STATUS_BROM_CMD_SEND_DA_FAIL error. At this point, I tried every possible option within the tool itself as well as trying all combinations on the phone Power + Vol down/up/both then plugging it to my PC, nothing. It keeps showing the same error.
Frustrated with this, did I screw up something? Did the preloader corrupt during the first run? I don't know what to do at this point.
snowlite said:
Hello! I posted on the official forum for Blackview but so far I haven't gotten a response. TL;DR, my phone, a Blackview BV5800 PRO, could not boot up (stuck on logo) and using recovery mode doesn't work. I get mounting issues when I try to factory reset, wiping the partition cache, and even mounting it (an option).
So my last resort was to attempt to re-flash the ROM using the provided ROM file by the OEM, which they did have on their forum. The first time around when I downloaded the ROM plus the SP Flash Tool, followed the instructions and all, it appears to be flashing just fine. As soon as it finished with the checkmark on screen, the phone is stuck in a black screen and Windows keeps detecting the device over and over, but nothing happens on the phone. From my research online, this is a feature of all MediaTek devices in an attempt to restore a factory ROM.
Now, when I try to flash again with the SP Flash Tool with the same ROM, I am getting a "STATUS_DA_HASH_MISMATCH" error. Or sometimes i get the "STATUS_BROM_CMD_SEND_DA_FAIL error. At this point, I tried every possible option within the tool itself as well as trying all combinations on the phone Power + Vol down/up/both then plugging it to my PC, nothing. It keeps showing the same error.
Frustrated with this, did I screw up something? Did the preloader corrupt during the first run? I don't know what to do at this point.
Click to expand...
Click to collapse
hey..
did u solve ur pb..? i have another phone wihch called blackview A60 pro i m getting same error.. it was working fine then suddenly dead..and no flashing or etc..