I got ADB going..
Tried the ole adb reboot bootloader & adb reboot recovery.. no dice they both just reboot the phone.
I've got a power button on the back & volume up & down.
I tried volume up & down from powered off.. even letting go & holding them back down after a second like I saw 1 suggestion for.. nope
I tried releasing & re-holding just the power button which took me to a factory reset of the phone which is just volume up & down & power to confirm yes or no 2 twice..
Anybody have any idea how to actually get to recovery ?
The weird thing is this phone has a "Allow OEM Unlock" in the dev settings.
I have the same phone and the same problem. I searched a little on the matter and read that the recovery hasn't been released yet, whatever that means. I had to completely factory reset mine to get a virus out(hopefully) Good luck, please share if you find a solution
Hard reset says
Hard reset. Com showed me that you have to hold the power button and the volume down button until you see the LG logo and then let go of the power button and immediately press it again and continue holding until the LG logo goes off in the recovery menu will come up but it's a piss-poor recovery menu because it only allows you to delete all files on the phone
Doesn't allow you to sideload anything and custom recovery i assume?
I got the LG Rebel 4 LML211BL its from tracphone and I've tried and tried to unlock it but I'm pretty sure it's carrier locked...ive been in ADB shell, tried bootloader, tried pushing files into ADB....tracphone has it locked
I have a passcode locked LML212VL and cant get into download mode.. Ideas?
Reset it, go through setup to wifi page. Turn off mobile and then click to turn off the wifi at the same time you click next to continue setup.
Related
Hey XDA! my friend is currently locked out of my LG MyTouch. The phone came out a little over a week ago so there's no forum dedicated to it yet, so I'm posting here.
She used a pattern lock and can't remember the Pattern nor her Gmail account or her password. With the past two Android phones I had, I would just Boot into recovery (Vol. Down & Power button), but this phone won't load into one. I also tried Vol. Up and Power. Nothing. I then tried both, but it went into the "S/W Upgrade" screen. Is there anyway to bypass this without having to send it back?
Thanks a lot for time guys! Hope you can help.
Hey daft
im locked out too, and cant find a way to do a factory reset :S did you solve your problem?if so..how!!
did a quick search for you. didnt render any answers. try existing methods for entering recovery mode.
1.volume down+power
2.volume up +power
volume up+down+power
the phone deff has to have a recovery system. once u get in there use the volume down button to highlight factory reset then push power
then highlight wipe data/cache and hit power. when finished reboot system now
hope this helps
---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------
also if you are familiar with adb you can navigate to adb then type adb reboot recovery
hello
Vabeach, thanks i've already tried all of those:S
volume up and power
volume down and power
both of them dont do a thing :S
and when i try the volume up + down + power....the phone goes into S/W upgrading... could it be that i need to do the upgrade and then itll let me do the factory reset? :s
Try this. Hold volume down and power. Keep holding until the lg logo comes up. Once that goes away release both buttons
sent from my Nexus S
vabeachfc3s said:
Try this. Hold volume down and power. Keep holding until the lg logo comes up. Once that goes away release both buttons
sent from my Nexus S
Click to expand...
Click to collapse
hello everybody i have the EXACT same probler, and this ^^^ is not the solution... i tried many variations and would not work please contact me if solution is found thank you
Get adb on your comp. Navigate to adb. Type in adb devices. U will see your device with serial number. Then type adb reboot recovery. Problem solved.
sent from my Nexus S
finally
finally the t-mobile page decided to tell us how....
i tried the link but it wont let me post..so ill paste it
A master reset (factory reset) restores the original factory settings and erases all user data (including settings and downloaded content) stored in the phone's internal memory. It does not erase data stored on the SIM card or memory card (if available).
Note: If the handset is locked, frozen, or unresponsive, you can perform a master reset using the hardware keys instead of the menu.
Note: Timing is critical in pressing/releasing keys.
To perform a master reset using hardware keys, follow these steps:
Back up all necessary data. See: Preparing for a master reset on Android.
Turn off the phone.
Press and hold the Volume Down and Power keys.
Wait 3 seconds and press the Back and Menu keys.
Note: If you see the LG logo before pressing the Back and Menu keys, the reset hasnt been completed and you will need to restart.
Release the Power/Lock key after you see the LG logo.
Release the remaining keys after the LG logo flashes (blinks once).
The Android Unpacking screen appears.
The phone will restart and complete the factory reset.
Note: If you unintentionally press the Volume Down, Volume Up and Power keys simultaneously, the phone will display a circle icon with two arrows and 'S/W Upgrade, Please wait while upgrading...' message. You will need to pull the battery and restart.
it worked on the first try!
happy holidays
Glad u found the answer
sent from my Nexus S
hey man thanks for this, have been searching for the answer for a while.. my phone didnt want to even power on.. now i am able to use it.. will turn it off and see if i can get it to turn on easily
Alex789 said:
finally the t-mobile page decided to tell us how....
i tried the link but it wont let me post..so ill paste it
A master reset (factory reset) restores the original factory settings and erases all user data (including settings and downloaded content) stored in the phone's internal memory. It does not erase data stored on the SIM card or memory card (if available).
Note: If the handset is locked, frozen, or unresponsive, you can perform a master reset using the hardware keys instead of the menu.
Note: Timing is critical in pressing/releasing keys.
To perform a master reset using hardware keys, follow these steps:
Back up all necessary data. See: Preparing for a master reset on Android.
Turn off the phone.
Press and hold the Volume Down and Power keys.
Wait 3 seconds and press the Back and Menu keys.
Note: If you see the LG logo before pressing the Back and Menu keys, the reset hasnt been completed and you will need to restart.
Release the Power/Lock key after you see the LG logo.
Release the remaining keys after the LG logo flashes (blinks once).
The Android Unpacking screen appears.
The phone will restart and complete the factory reset.
Note: If you unintentionally press the Volume Down, Volume Up and Power keys simultaneously, the phone will display a circle icon with two arrows and 'S/W Upgrade, Please wait while upgrading...' message. You will need to pull the battery and restart.
it worked on the first try!
happy holidays
Click to expand...
Click to collapse
this isnt working for me....it just goes straight to S/W upgrade with no lg logo....help
So, my Maxx suffered a power button failure and I should be receiving my warranty replacement from VZW sometime in the next day or two. Other than the power button not working, the phone is functioning fine. It reboots, runs normally, functions perfectly. I'm running .215 rooted and I want to return the phone back to stock before shipping it back. Problem is I can't access Boot Loader, no matter what I try. It's like it's not there anymore and when I command the phone into it using quick boot, adb, or the built-in menu, the phone just power cycles off. Let me try to explain:
I have Quick Boot installed and I can use it to boot into recovery without a problem. If I try to boot into Boot Loader, the phones powers off and stays off.
I've tried adb shell with the same results. I can connect to my PC and command the phone using shell commands but usin the 'adb reboot bootloader' command results in the same thing: phone power cycles off and stays off.
Even though my power button is AFU, I figured out I can still access the main recovery menu (the vol down to choose, vol up to select one) by holding down the vol up/down and plugging the phone into a charger. Same thing: power cycles off and stays off.
* Funny thing is although my power button doesn't work, I can still soft reset the phone by holding the power button in and vol down - which is what I need to do to exit recovery or other menus I need to input to a prompt using the power button.
Anyone know of this happening? MY guess is since my phone starts and functions normally otherwise, the boot loader is still there in some form. I just don't know how to access it. Any help would be much appreciated.
I can confirm this app will reboot bootloader
https://play.google.com/store/apps/details?id=org.riceknight.gs2reboot
Sent from my DROID RAZR using xda premium
Thanks Dave but not for me. Same result: phone power cycles off and just stays off when selecting reboot bootloader.
Sent from my DROID RAZR using xda premium
jeff_roey said:
So, my Maxx suffered a power button failure and I should be receiving my warranty replacement from VZW sometime in the next day or two. Other than the power button not working, the phone is functioning fine. It reboots, runs normally, functions perfectly. I'm running .215 rooted and I want to return the phone back to stock before shipping it back. Problem is I can't access Boot Loader, no matter what I try. It's like it's not there anymore and when I command the phone into it using quick boot, adb, or the built-in menu, the phone just power cycles off. Let me try to explain:
I have Quick Boot installed and I can use it to boot into recovery without a problem. If I try to boot into Boot Loader, the phones powers off and stays off.
I've tried adb shell with the same results. I can connect to my PC and command the phone using shell commands but usin the 'adb reboot bootloader' command results in the same thing: phone power cycles off and stays off.
Even though my power button is AFU, I figured out I can still access the main recovery menu (the vol down to choose, vol up to select one) by holding down the vol up/down and plugging the phone into a charger. Same thing: power cycles off and stays off.
* Funny thing is although my power button doesn't work, I can still soft reset the phone by holding the power button in and vol down - which is what I need to do to exit recovery or other menus I need to input to a prompt using the power button.
Anyone know of this happening? MY guess is since my phone starts and functions normally otherwise, the boot loader is still there in some form. I just don't know how to access it. Any help would be much appreciated.
Click to expand...
Click to collapse
If there is no bootloader you won't be able to start your phone at all as its THAT what basically boots the whole hardware and software....
How about adb reboot bootloader or adb reboot recovery commands ?
maarawoe said:
If there is no bootloader you won't be able to start your phone at all as its THAT what basically boots the whole hardware and software....
How about adb reboot bootloader or adb reboot recovery commands ?
Click to expand...
Click to collapse
The bootloader being the phone's "bios" is kind of how I understood it so I'm figuring it's still gotta be there. I just can't seem to access it or get to the "device/battery OK, device disconnceted" menu. I tried adb reboot bootloader and got the same results: power cycle to off and stays off. adb reboot recovery works fine.
Knowing this phone is going to be turned back in, is there any other way I could re-install .211 without having access to the bootloader screen?
jeff_roey said:
The bootloader being the phone's "bios" is kind of how I understood it so I'm figuring it's still gotta be there. I just can't seem to access it or get to the "device/battery OK, device disconnceted" menu. I tried adb reboot bootloader and got the same results: power cycle to off and stays off. adb reboot recovery works fine.
Knowing this phone is going to be turned back in, is there any other way I could re-install .211 without having access to the bootloader screen?
Click to expand...
Click to collapse
Try the eternity project flasher or the motorola's rds lite if they will be able to put the phone to the flash mode as they do that automatically...
maarawoe said:
Try the eternity project flasher or the motorola's rds lite if they will be able to put the phone to the flash mode as they do that automatically...
Click to expand...
Click to collapse
I posted a thread over at DroidRAZR.com and got some good feedback and troubleshooting help. It looks like the bottom line is the power button failed in the 'on' postion. One of the folks that replied to the DR thread caused his device to show the same 'AP Fastboot power-off' that I was getting by entering the 'Boot Mode Selection Menu' and holding the power button down while he vol+ to select AP Fastboot. It caused me to look a little closer at what the device was doing and that seems to be exactly what's going on - I powered th phone down using the Quick Boot app and was able to soft reset by holding down the vol- key by itself (didn't need to press power in conjunction). After it SR and i released the vol- key, the device rebooted by itself.
For your info, that thread is here: http://www.droidrzr.com/index.php/topic/3782-cant-access-boot-loader-menu-no-matter-what/
I tried working a thin piece of paper in around the button but no luck there.
Hey guys,
Iv got a stock US tablet Z, SGP311 on 10.4.1.b.0.109
Iv tried holding power and volume + while booting to get into stock recovery, iv tried tapping Vol+ a few times while booting, iv tried holdin Vol+ for 3 seconds and then hitting power......i cant get this damn thing into recovery!
Can someone help??
Snazarian said:
Hey guys,
Iv got a stock US tablet Z, SGP311 on 10.4.1.b.0.109
Iv tried holding power and volume + while booting to get into stock recovery, iv tried tapping Vol+ a few times while booting, iv tried holdin Vol+ for 3 seconds and then hitting power......i cant get this damn thing into recovery!
Can someone help??
Click to expand...
Click to collapse
There is no Recovery Mode in the XTZ's stock firmware. Here is how to access the available functions of the stock firmware.
1. Power On
Press and hold the POWER button until notification light flashes once, then release POWER button.
2. Power Off
Press and hold the POWER button until menu appears, then select "Power off" and "OK".
3. Restart
Restart device to turn off all running applications and to free up memory.
3.1. Simultaneously press and hold the VOLUME UP and POWER buttons for 10 seconds.
3.2. After the notification light flashes three times, release the buttons.
3.3. The device will power off automatically.
3.4. After the device is powered off, power on the device.
4. Reset
Reset device to its original settings to free up memory.
Don't forget to back up any important data saved on the device!
4.1. Go to Settings > Backup & reset > Factory data reset > Reset tablet.
5. Enable Safe Mode
5.1. Power off the device.
5.2. Press and hold the POWER button until the notification light flashes once.
5.3. Wait until the Xperia™ logotype disappears.
5.4. Press and hold the VOLUME DOWN button.
5.5. The device will restart in Safe Mode.
5.6. To exit Safe Mode, restart the device.
6. Flash Mode
6.1. Power off the device.
6.2. Connect a USB cable to the device.
6.3. Press and hold the VOLUME DOWN button.
6.4. Connect the USB cable to a computer.
6.5. Wait until the notification light flashes red-green once, then release VOLUME DOWN button.
6.6. To exit Flash Mode, disconnect the USB cable.
7. Fastboot Mode.
7.1. Power off the device.
7.2. Connect a USB cable to the device.
7.3. Press and hold the VOLUME UP button.
7.4. Connect the USB cable to a computer.
7.5. Wait until the notification light flashes red then solid blue, then release VOLUME UP button.
7.6. To exit Fastboot Mode, disconnect the USB cable.
8. Service Menu
8.1. Start the Contacts app.
8.2. Go into Settings.
8.3. Touch the blank area at middle bottom of screen for at least five seconds then stop touching screen.
8.4. "Enter service mode" button will be displayed.
8.5. Press the "Enter service mode" button.
8.6. Enter *#*#7378423#*#* (*#*#SERVICE#*#*).
8.7. Service menu will be displayed.
8.Notes.1. Enter *#*#4636#*#* (*#*#INFO#*#*) to display testing information.
8.Notes.2. Enter *#*#73556673#*#* (*#*#SELLMORE#*#*) to toggle Demo Mode activation on/off. WARNING! Activating Demo Mode will delete all personal content (photos, etc.) and settings.
How do you flash CM then ?
Cat McGowan said:
There is no Recovery Mode in the XTZ's stock firmware.
Click to expand...
Click to collapse
Thanks for telling ! I had been looking for this information for a long time.
Apparently, my service info says "bootloader unlock allowed: yes", I wonder if it means that I actually unlocked it or that the device would accept me to do it.
I moreover wonder how one can manage to install CM or root its device without using Recovery Mode. I saw on your signature you rooted your device. May I ask how you did that ?
ducasse.isidore said:
Thanks for telling ! I had been looking for this information for a long time.
Apparently, my service info says "bootloader unlock allowed: yes", I wonder if it means that I actually unlocked it or that the device would accept me to do it.
I moreover wonder how one can manage to install CM or root its device without using Recovery Mode. I saw on your signature you rooted your device. May I ask how you did that ?
Click to expand...
Click to collapse
It means your bootloader CAN BE unlocked.
To install a ROM, such as CM, you first unlock your bootloader, then move the ROM zip to your device. After that, you flash the included kernel from the zip with fastboot. Then, you boot into the included recovery from the kernel and flash the whole ROM.
Sent from my LT26i using Tapatalk
Felimenta97 said:
It means your bootloader CAN BE unlocked.
To install a ROM, such as CM, you first unlock your bootloader, then move the ROM zip to your device. After that, you flash the included kernel from the zip with fastboot. Then, you boot into the included recovery from the kernel and flash the whole ROM.
Sent from my LT26i using Tapatalk
Click to expand...
Click to collapse
I finally found a solution to my problem : I unlocked the device using flashtool-0.9.11's gui procedure, instead of flashtool's fastboot. It succeeded and I can successfully flash anything I want on the device.
I found your rational approach to my problem useful. It helped me isolate a solution. Thanks !
Hi there
I know this is an old thread. But my problem is same. I got this devide called sony experia tablet z lte ntt docomo x variant
My problem is that it got a lock screen and i have forgot the password. So i want to reset it.
But the problem is how do i do that, there isnt a recovery on this thing.
I was playing around with the buttons and i dont know how ,or which combination i pressed the tab booted to a factory reset screen but i wanst sure to reset that time so i exited from that and tablets lock screen appeared.
And now i cant figure out that how to do this again. Please help me
......
Hi there
I know this is an old thread. But my problem is same. I got this devide called sony experia tablet z lte ntt docomo x variant
My problem is that it got a lock screen and i have forgot the password. So i want to reset it.
But the problem is how do i do that, there isnt a recovery on this thing.
I was playing around with the buttons and i dont know how ,or which combination i pressed the tab booted to a factory reset screen but i wanst sure to reset that time so i exited from that and tablets lock screen appeared.
And now i cant figure out that how to do this again. Please help me
......
Press and hold the Power and Volume Down keys for 10 seconds.
The device will reset and restart.
Hey everyone (Again),
So i managed to unlock the bootloader and everything went smoothly but I flashed my recovery i can't get into it now it comes up with an error message everytime i try to get into recovery it says ' Your software cannot be checked for corruption' any way to get rid of this or do i have to re- lock the bootloader just to fix it and get recovery working.
Thanks again.
Anyone?
ZuneYT said:
Hey everyone (Again),
So i managed to unlock the bootloader and everything went smoothly but I flashed my recovery i can't get into it now it comes up with an error message everytime i try to get into recovery it says ' Your software cannot be checked for corruption' any way to get rid of this or do i have to re- lock the bootloader just to fix it and get recovery working.
Thanks again.
Click to expand...
Click to collapse
That's not an error message, that's the message you'll see every bit if you unlock the bootloader. Do NOT relock your bootloader after installing custom recovery. Also to get into recovery (provided you installed it correctly and it wasn't erased after it booted info Android) is to turn your phone off (or pull battery) and then hold volume down & power button, one you see the LG logo let go of the power button only (still hold volume down) for about 1 second and then press the power button again and hope (never let go of volume down). It will ask you if you want to reset your phone, select yes two times and you will enter TWRP. If it actually resets your phone, TWRP isn't installed. Usually after installing TWRP you need to pull battery then use above method to boot into recovery, mount system partition and use TWRP file manner to delete come named "recovery from boot.p". You can also go ahead and install SuperSU or magisk (use magisk if you need to be able to pass safety net). Hopefully this helps you, also next time please include what model phone you have and what steps exactly you did as it's easier for others to attempt to help you.
Mines a H850 running nougat as well but thats the only thing it wont boot to recovery because when i hold down the volume down button and the power button the lg logo shows up but then after 4 seconds that google message will pop up and that gets in the way of doing the method to get onto recovery thats my problem
ZuneYT said:
Mines a H850 running nougat as well but thats the only thing it wont boot to recovery because when i hold down the volume down button and the power button the lg logo shows up but then after 4 seconds that google message will pop up and that gets in the way of doing the method to get onto recovery thats my problem
Click to expand...
Click to collapse
You have to follow exactly what I posted earlier. If you do that, it will show the factory reset screen which is you have TWRP installed, it will not into TWRP.
1) Power off phone
2) Press and hold volume down (do not let go until you see factory reset screen)
3) Press and hold power button, when you see LG logo, let go of power button for 1 second and then press and hold again.
If you do not follow step 3, you'll never be able to boot to recovery using button combo, it will just go to that message and then boot into Android.
jeffsga88 said:
You have to follow exactly what I posted earlier. If you do that, it will show the factory reset screen which is you have TWRP installed, it will not into TWRP.
1) Power off phone
2) Press and hold volume down (do not let go until you see factory reset screen)
3) Press and hold power button, when you see LG logo, let go of power button for 1 second and then press and hold again.
If you do not follow step 3, you'll never be able to boot to recovery using button combo, it will just go to that message and then boot into Android.
Click to expand...
Click to collapse
Thanks for that! I got it working cheers
I'm actually having a similar issue too.
To clarify, I'm using a LG G5 (h830 variant) that is running resurrection remix.
I remember getting into recovery just to flash the updated modem and bootloader zips so I can fix the issue with powering off the device.
Now I noticed after doing that, I cannot get into recovery either with rebooting or with the button combo.
Thankfully I am rooted with magisk and this is probably the first time that I encountered this issue.
I don't want to further risk anything (because my phone is set up and don't want to lose any data) but would flashing twrp through the official app work just fine?
jeffsga88 said:
That's not an error message, that's the message you'll see every bit if you unlock the bootloader. Do NOT relock your bootloader after installing custom recovery. Also to get into recovery (provided you installed it correctly and it wasn't erased after it booted info Android) is to turn your phone off (or pull battery) and then hold volume down & power button, one you see the LG logo let go of the power button only (still hold volume down) for about 1 second and then press the power button again and hope (never let go of volume down). It will ask you if you want to reset your phone, select yes two times and you will enter TWRP. If it actually resets your phone, TWRP isn't installed. Usually after installing TWRP you need to pull battery then use above method to boot into recovery, mount system partition and use TWRP file manner to delete come named "recovery from boot.p". You can also go ahead and install SuperSU or magisk (use magisk if you need to be able to pass safety net). Hopefully this helps you, also next time please include what model phone you have and what steps exactly you did as it's easier for others to attempt to help you.
Click to expand...
Click to collapse
YOU SAVE MY LIFE!!!
i ran fastboot oem lock with custom firmware and the phone did not boot anymore and also does not enter in recovery mode
after 3 days installing many types of firmwares with this simple reset metod the phone boot again! :good::good::good::good:
jeffsga88 said:
You have to follow exactly what I posted earlier. If you do that, it will show the factory reset screen which is you have TWRP installed, it will not into TWRP.
1) Power off phone
2) Press and hold volume down (do not let go until you see factory reset screen)
3) Press and hold power button, when you see LG logo, let go of power button for 1 second and then press and hold again.
If you do not follow step 3, you'll never be able to boot to recovery using button combo, it will just go to that message and then boot into Android.
Click to expand...
Click to collapse
I know this is old,Just wanted to say thank it worked for me...
Been a while since I used LG and never with official bootloader unlock so I was thrown off by resetting to recovery as at first i never had the lg screen just the bootloader warning start
For those T-Mo G5 (H830) with unlocked bootloader, you will not see any LG logo. Once you see the lcd backlight comes on, immediately release the power button and press it again, all the while holding down the vol down button.
When you see the bootloader unlocked phone is unsafe msg by LG on the screen, it will already be too late and past the stage where you can boot to recovery. Simply power down and redo in that case.
(Needed to do the above as the latest Magisk 20.0 broke root and adb on H830, thus there was no way to get into recovery other than using the physical buttons. The Magisk Canary version of 20.1 works though.)
HELP! Blue Wave 8 33GT tablet stuck in recovery mode with "No command" message
I got my Blue Wave 8 33GT (not HD+) tablet completely bricked. First of all, I know this is not really a popular device and some of you might not have a single knowledge about this one, but I hope in any way you might help me get this device working again. Thank you in advance!
Some info about this device:
Bluewave's website: Wave 8
Android OS version: 4.4 KitKat
Device processor: Rockchip-based (RK31)
What just happened? It suddenly reboots while I'm playing and gone into recovery mode with an Android and a "No command." message. Now it won't boot the system anymore whenever I reboot, it always going into this recovery mode.
It has no volume buttons, just a reset, a hard back button and power button. Holding down the power and back button goes into the recovery mode directly. Through normal boot, it flashes the Bluewave logo twice then goes into the recovery. While the reset button immediately turn the device off. There's nothing else I can think of that I can do in this case.
My laptop can recognize it as an ADB Device in recovery mode and I think I may be able to flash it via Rockchip BatchTool, but the instructions I've read states that the device should be up and with a USB debugging enabled which I am not currently able to do in recovery mode. Device is rooted and working totally fine until this happened.
Anyone got into this kind of problem and able to go through it? Please, any help is greatly appreciated.
P.S
Just let me know if there are any additional info I could give you.
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
AutomaticSearches said:
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
Click to expand...
Click to collapse
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Humble Potato II said:
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Click to expand...
Click to collapse
May be this site help: http://bluewave-global.com/wave_8.php#frame4
"Long press the power button to restart the device. If restarting fails, hard reset the tablet by poking the Reset hole using a pin. " it is from FAQ
maybe this could help.
1. Press the power button to get the option menu for
Power off
Reboot
Silence phone option.
2. on that menu you have to hold down that power off option on your touch screen while also holding down the home push button on the side of your tablet.
3. This brings up a screen to reboot into safe mode..(these are the 3 steps the company does not tell you that is why no one gets it to work.
4. HIt yes for safe mode and then hold down your power and home buttons on side of tablet till the dopo Logo appears.
5. Release both buttons and hit the power button one time and then hold only the home button down till a menu option appears.
6. Use the home button to move down to factory reset and press the power button to select. Once it says complete then use the power button to select reboot.
Problem solved. Hope this will help everyone out.
The only way is to remove the battery, attached again the battery then power it on their is no hard reset on blue wave the go to settings factory reset