Hi I was trying to factory reset my mate 10 pro after changing the broken screen.
The problem is that when I go in the menu (power/Volume +) it asks me to type yes to erase all data.
The only problem that it registers only one touch from the touch screen than it stops and works only with the physical buttons (I can only type the Y of yes)
I am about to send it to a huawei center but is always very expensive.
Do you guys have a solution?
PS. the touch screen works when I boot on the "normal phone"
Schony125 said:
Hi I was trying to factory reset my mate 10 pro after changing the broken screen.
The problem is that when I go in the menu (power/Volume +) it asks me to type yes to erase all data.
The only problem that it registers only one touch from the touch screen than it stops and works only with the physical buttons (I can only type the Y of yes)
Click to expand...
Click to collapse
Try OTG & mouse .
i-get-the-same-problem-cananyone-assist-please
Related
I HAVE THE SPRINT TOUCH PRO STOCK ROM.
A WHILE AGO I REGRETABLY INSTALLED [ezInput 2.1]
[http://mylostblog.altervista.org/software/freeware/per-htc/htc-freeware-htc-keyboard-ezinput-21]
WHEN I DID THE SOFT RESET MY DEVICE GOT STUCK ON THE "TOUCH PRO SCREEN WITH Rom/Radio... info at the bottom.
I've tried several different things to try and make it work.
1. took out the battery and restart.
2. take out the memory card (where i installed) then baterry and restart
3. tried to connect to laptop (nothing)
notes: power button doesn't do anything
when i call my phone the LED light flickers for incoming call,
but, cannot answer.
tried searching for solutions on xda
http://forum.xda-developers.com/showthread.php?t=446719
i dont have "insurance" so i just cant get a new one
CAN ANYONE HELP ME WITH THIS PROBLEM???
NEW MESSAGE POPPED UP: the device is unable to boot beacuse either you have turned off the device incorrectly or tried to install an application from an untrusted source. press the volume up to reset your device or press any other button to cancel. this operation will delete all your personal data and restore the device to its factory settings.
You have to hard reset the device, like the message stated. If that doesn't do the trick, boot it in tricolor mode and reflash the ROM.
<SOLVED>
Problem solved. Factory reset. Good thing i had back-up.
So I think I officially bricked my nook tablet.
Rooted the nt, installed swype keyboard. Forgot to switch to regular android keyboard before I performed a soft reset. After soft reset no keyboard pops up in the tutorial setup screen. Performed a factory reset by holding the power button + volume up button + home button. Got the screen prompting if you want to hit home or power to format/not format. Clicked the home button.
No keyboard pops up still.
Thus you can't bypass the setup screen.
Any suggestions?
I'm thinking a visit to a barnes and noble store where you can login to the store wifi may bypass the wifi screen but you won't be able to type in your email for your account.
I get the sorry, swype has stopped unexpectedly error message even after I performed a factory reset.
if you are going to the store, you might as well ask them to reformat/re-install. They should have a microSD card with a signed image for the NT. While you are at it, maybe you can get them to expand the USERS partition and give you more than 1GB?
Force 8 bad boots *start it, wait for white splash screen with N on it then hold n button + power* for 8 times then it will automatically wipe itself.
Is that different than a factory reset?
Indirect said:
Force 8 bad boots *start it, wait for white splash screen with N on it then hold n button + power* for 8 times then it will automatically wipe itself.
Click to expand...
Click to collapse
I actually did the 8 or 10 (can't remember ) bad boots method without holding n and it still factory reset (cleared android market and root).
Edit:
Also, I got no format/don't format screen prompt. It just automatically started to wipe itself.
It's very different. It wipes the system (where you removed the keyboard from) and then it reinstalls the operating system.
Would it also reformat a memory card if you have one installed?
got my nook working again, thanks!
B&N developers do not work at the stores
discothan said:
While you are at it, maybe you can get them to expand the USERS partition and give you more than 1GB?
Click to expand...
Click to collapse
B&N stores don't have that capability.
Indirect said:
Force 8 bad boots *start it, wait for white splash screen with N on it then hold n button + power* for 8 times then it will automatically wipe itself.
Click to expand...
Click to collapse
Thanks, ever since I started from scratch "completely" I can sideload all kind of apks.
Hi All,
I have a Zopo ZP900. Unfortunately, My kid tried too many pattern attempts, WITH OUT a data connection.
I tried lot of ways to get the phone unlocked but Could not do it.
Can any one help me out to get rid of this? My phone debug mode itself is not turned on...
Thanks a lot...
With regards
Saravanakumar S A
If u dont have umportant data on it u can do a full wipe using the stock recovery
1 close the phone
2 press vol up + power or home + power or vol up +home + power to enter the recovery
3 using the vol buttons to choose and home key to select , select wipe data/system format and choose yes
4 reboot and you will found that the lock vanished but every thing is wiped (this won't affect the sd card only the system memory
Sent from my GT-S5360 using xda premium
Pattern locked with out Data connection
When I try, I am getting only the following screen.
Factory mode
Full test
Item test
Test report
Clear eMMC
Version
Reboot
I could able to move the cursor up or down. But not ablke to choose anything else. Only option to get out of this to remove the battery.
Some time, I get an Android Icon, lying down and a red triange from its body!
sulursaro said:
When I try, I am getting only the following screen.
Factory mode
Full test
Item test
Test report
Clear eMMC
Version
Reboot
I could able to move the cursor up or down. But not ablke to choose anything else. Only option to get out of this to remove the battery.
Some time, I get an Android Icon, lying down and a red triange from its body!
Click to expand...
Click to collapse
simple go to Factory mode
then go to wipe data option
voila
phone is unlock
note ur data is deleted
but u can enjoy the feeling of new phone
Pattern locked with out Data connection
sammyroid said:
simple go to Factory mode
then go to wipe data option
voila
phone is unlock
note ur data is deleted
but u can enjoy the feeling of new phone
Click to expand...
Click to collapse
Dear Sammyroid,
But even in that I have a problem. I could not get into that Factory mode. This ZP900 had only 3 physical buttons. Nothing works so that I can choose the option. I am able to only move up and down using volume control. The home and power button are not working.
sulursaro said:
Dear Sammyroid,
But even in that I have a problem. I could not get into that Factory mode. This ZP900 had only 3 physical buttons. Nothing works so that I can choose the option. I am able to only move up and down using volume control. The home and power button are not working.
Click to expand...
Click to collapse
I also have Exactly the same problem....(i dont even know what this tablet's model is...it just shows up in the Android Market as J-Q8B)
1) It only has two physical buttons (Power on/off button and Volume key up/down) so there is NO "home" button I can press
2) It also doesn't have any "reset" hole I can poke into and get it to reset or something
3) Cant remove the battery also coz it doesnt have any screws I can open up to take out the battery
:,-( I am screwed....I think I just found myself a "new door-stopper" and/or paper weight.
Is there some other way around this?
I too faced this problem on my karbonn a9+ .... I gave to service centre and they repaired and gave back in 5 days :-/
Sent from my GT-S5360 using xda app-developers app
Hopefully someone can help me, my child has a Pendo Pad 7 Model no.PNDPP44QC7 with Kitkat 4.4 and it ended up with lots of malware/viruses and barely usable. This tablet only has a power button and no other buttons so I did not know how to boot into recovery mode to do factory reset and after trying reset through settings which made no difference so I gave the device ROOT access so I could try and delete the malware etc but of course i did not do any sort of backup and did not add CWM or TWRP recovery. I ended up deleting something wrong and now the device just hangs on the Pendo logo screen. I have since worked out how to boot into Recovery Mode and also Fastboot mode now but a bit too late I tried to do a wipe data/factory reset and this made no difference still hangs on Pendo logo.
I can't seem to find a CWM or TWRP image file to suit the tablet and possibly try putting tablet into fastboot mode and using ADB on computer and flash the recovery to tablet. ???
in recovery mode options i get are
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
but i can not seem to find any correct files to work with this tablet any help to get this tablet working again would be much appreciated Thanks
Good day! how did you manage to boot into Recovery Mode or Fast Mode?
After pressing the power button and seeing the display turn on. Keep spamming the power button and a menu will pop-up on screen with boot options. Short press of the power button cycles through the options, long press selects the option.
Mine was also stuck on a boot loop, even though I had not played around with any settings or tried to root etc. I was able to revive it by going into recovery mode and doing a factory reset.
Hey OP I've got hold of the same tablet I'm working on getting a rom dump atm. Bare with me I'll try and send a link for the img. If u can get into recovery mode where u can update zip. That's good if not try and via pc. Once u have a link to the tablets boatloader, rest is history.
Hi,
Wondering if I can follow up on this.
Mine is stuck on the PENDO boot screen, and I have tried the reset button, as well as the se commands PENDO suggested....
1. Press On/Off Switch (Power), wait for the Pendo Logo start up screen, and then press On/Off Switch (Power) twice right away.
2. Factory mode menu comes out after 10 seconds, two fingers touches panel together to move to select the one like the following picture shows (no need to understand the Chinese words, just follow through as what the picture shows)
3. Press On/Off Switch (Power) and the following picture below will show, press On/Off Switch (Power) again to proceed on Recovery Mode, and wait for system to restart.
Unfortunately, nothing still happens.
ADB will not reveal what device it is, nor will Win 10 recognise the device for it to show in Device Manager or connected devices.
Windows responds with a ding ding, but nothing shows up.
I am stuck, and any info gladly accepted.
Thanks
bump please
ozviewer said:
Hi,
Wondering if I can follow up on this.
Mine is stuck on the PENDO boot screen, and I have tried the reset button, as well as the se commands PENDO suggested....
1. Press On/Off Switch (Power), wait for the Pendo Logo start up screen, and then press On/Off Switch (Power) twice right away.
2. Factory mode menu comes out after 10 seconds, two fingers touches panel together to move to select the one like the following picture shows (no need to understand the Chinese words, just follow through as what the picture shows)
3. Press On/Off Switch (Power) and the following picture below will show, press On/Off Switch (Power) again to proceed on Recovery Mode, and wait for system to restart.
Unfortunately, nothing still happens.
ADB will not reveal what device it is, nor will Win 10 recognise the device for it to show in Device Manager or connected devices.
Windows responds with a ding ding, but nothing shows up.
I am stuck, and any info gladly accepted.
Thanks
Click to expand...
Click to collapse
not working in my pendotab window 8
Hi,
I could get no further with mine, the same as you.
I contacted Pendo Support, and explained it would work but not boot, I even asked for the image file so I could reload it in recovery mode, however, they did not have access to it, the Chinese manufacturer had not made it available to them.
As I described it was not damaged, but simply not working, they agreed to send me a replacement, even though it was out of warranty, as really, as I said to them, it was not fit for purpose.
I had to send the old one back, but they sent me a satchel in which to do so, at no cost to me.
They sent me the new one very promptly.
Hope is not lost,
Someone has finally manage to extract the factory ROM for the pendo PNDPP44QC7. Just search the model number on needrom.
phoenixemer.blogspot.com.au/2017/04/pendo-pad7-pndpp44qc7.html
password : emerlitspendotab7
TWRP custom recovery
drive.google.com/open?id=0B3k_2dFOmDBGRmljV3JuSUZiUkU
I tried to upgrade a similar device to 5.x, some changes, but some options now not working I have a clone Q88H device, A33 quadcore processor 7" clone. Kernel 3.4.39, firm ware 2.1 Need to go back to 4.4.2 w latest update. Hopefully Play store will work again, as I need it. That, or change to windows version. advice pls?
drusid said:
Hope is not lost,
Someone has finally manage to extract the factory ROM for the pendo PNDPP44QC7. Just search the model number on needrom.
phoenixemer.blogspot.com.au/2017/04/pendo-pad7-pndpp44qc7.html
password : emerlitspendotab7
TWRP custom recovery
drive.google.com/open?id=0B3k_2dFOmDBGRmljV3JuSUZiUkU
Click to expand...
Click to collapse
Please i dont have a needrom account i cant download plz who Can send me the direct link to m'y account
Hello Community,
I got my Hisense A5 as a second hand device – possibly from chinahandys. It had google apps installed and no visible chinese bloatware.
Played around a bit for a few days then enabled developer settings and by accident checked some screen / hardware acceleration options.
Immediately after, the eink display did not update showing vertical lines. After rebooting, I still see the Hisense logo and immediately after that, vertical lines / glitches.
Obviously, the phone works as I can answer calls (by sliding my finger "blindly" across the spot the UI elements are) but I cannot see what I am doing as the screen never refeshes anymore. However, I can confirm the screen itself is working as it cleans/resets and shows the clean logo after a reset. Immediately after that, it freezes again and shows vertical lines only.
I tried holding down Vol down + Power and resetting the phone (deleting user data as fas as I could translate the CN font) but that did not reset the system / wipe the settings.
As the screen does not respnd / update, I cannot even select the transfer mode after connecting a USB cable. ADB cannot connect the device.
Can anybody help?
Thanks!
login to google account and remote erase device
https://www.google.com/android/devicemanager
in case you don't have bonded google account, boot into Android System Recovery <3e> (in english language!) and factory reset device.
Warning: Don't do this if you forgot google password, factory reset from recovery mode will trigger FRP lock.
https://www.hardreset.info/devices/hisense/hisense-a5/recovery-mode
aIecxs said:
login to google account and remote erase device
https://www.google.com/android/devicemanager
in case you don't have bonded google account, boot into Android System Recovery <3e> (in english language!) and factory reset device.
Warning: Don't do this if you forgot google password, factory reset from recovery mode will trigger FRP lock.
https://www.hardreset.info/devices/hisense/hisense-a5/recovery-mode
Click to expand...
Click to collapse
Hi and thanks for your advice.
I was able to reset the phone via the VISION recovery (I don't know why the phone did not load into bootloader).
For anyone coming across this: I used another phone to translate the chinese text using google translate / camera and found out the reset & wipe option requires you to press VOLUME to confirm. In the past, I only selected the one available option button but that turned out to to be "abort & reboot".
Thanks again!