How to get btsnoop_hci? - LG V30 Questions & Answers

Hi
I want to capture my bluetooth traffic on my stock V30 (Europe). I enabled developer options and
activated "Bluetooth HCI-Snoop-Prtokol...". I then rebooted the phone and re-enabled bluetooth, but
there is no file btsnoop_hci anywere in the filemanager. Any ideas?

got it. I had to use adb via usb:
Code:
adb bugreport anewbugreportfolder
adb pull /bugreports/bugreport-joan_global_com-OPR1.170623.026-2019-05-06-12-06-24.zip
and then unzip the file and the log is in the "FS/data/misc/bluetooth/logs/" folder.

Related

[Q] How to fix edit of platform.xml gone wrong on Note3 SM-N9005?

I did a search and have found similar threads. However, people seem to have been intelligent and back up stuff or installed recovery apps before screwing around with their phones. I did not.
I have a Samsung Note3. Kit Kat 4.4.2 installed OTA once I had it up and running. I rooted it. However, the version of Kit-kat has a famous issue in that it would not allow apps to write to the SD card. I found a site with manual instructions to edit the platform.xml to overcome this issue. The site is as below:
winaero.com/blog/unlock-external-sd-card-writing-for-all-apps-in-android-4-4-kitkat/
However, something went awry after rebooting. I could not see anything on my SD card and I was unable to edit the platform.xml. A solution seemed to be to flash the ROM (using ODIN 3.07). I did this and currently have Baseband version N9005XXUENB1 and Build Number KOT49H.N9005XXUENB7
However, the still has lots of issues. I can stick in a password on wifi and connect to the network but it does not actually communicate with the internet. The H with up and down arrows appears for 3g connectivitiy but also does not work. Bluetooth does not work. Youtube has stopped working errors are common. I am unable to install any apps as cannot use play store, etc. I have pictures and mp3s on my SD card but gallery comes up empty as does music app. The only "file explorer" I seem to have is "my files" app. It comes up as empty (although it shows Total storage available for both SD memory and device storage as using 25/32 and 22/29 respectively.
I am guessing that flashing the ROM did not remedy the corrupt platform.xml in the permissions folder. I think the folder path was etc/permission/platform.xml although am not an expert with android. I was hoping someone might be able to give me a solution to fix the issue. Preferably a completely fresh and clean wipe type solution. Although as I am a "newbie" the greater the simplicity of the solution the better.
Apologies for the length of this issue!
T
laconical said:
I did a search and have found similar threads. However, people seem to have been intelligent and back up stuff or installed recovery apps before screwing around with their phones. I did not.
I have a Samsung Note3. Kit Kat 4.4.2 installed OTA once I had it up and running. I rooted it. However, the version of Kit-kat has a famous issue in that it would not allow apps to write to the SD card. I found a site with manual instructions to edit the platform.xml to overcome this issue. The site is as below:
winaero.com/blog/unlock-external-sd-card-writing-for-all-apps-in-android-4-4-kitkat/
However, something went awry after rebooting. I could not see anything on my SD card and I was unable to edit the platform.xml. A solution seemed to be to flash the ROM (using ODIN 3.07). I did this and currently have Baseband version N9005XXUENB1 and Build Number KOT49H.N9005XXUENB7
However, the still has lots of issues. I can stick in a password on wifi and connect to the network but it does not actually communicate with the internet. The H with up and down arrows appears for 3g connectivitiy but also does not work. Bluetooth does not work. Youtube has stopped working errors are common. I am unable to install any apps as cannot use play store, etc. I have pictures and mp3s on my SD card but gallery comes up empty as does music app. The only "file explorer" I seem to have is "my files" app. It comes up as empty (although it shows Total storage available for both SD memory and device storage as using 25/32 and 22/29 respectively.
I am guessing that flashing the ROM did not remedy the corrupt platform.xml in the permissions folder. I think the folder path was etc/permission/platform.xml although am not an expert with android. I was hoping someone might be able to give me a solution to fix the issue. Preferably a completely fresh and clean wipe type solution. Although as I am a "newbie" the greater the simplicity of the solution the better.
Apologies for the length of this issue!
T
Click to expand...
Click to collapse
Sounds like a bit of a pickle. Since you know that Odin is working and the firmware you have at least flashes correctly, I'd consider installing a custom recovery, backing up EFS folder (and the rom too, just in case there is some weird issue with Odin the 2nd time around) , then wipe everything - /system included. This will make your phone not be able to boot up at all because it will wipe the OS off. Then just boot directly to Download and redo the firmware flash. Something else to consider since you do have the international version, is that some of the firmwares you install might be more carrier or region specific, so there might be a better option to install. I know that there is a some slightly newer version that has NC2 in it as I was trying to fix one of these phones the other day that could not register on any network and ran across that build. Do you remember the build number of the software before you started modding?
Hello. Thanks for the reply.
I am going to ask what are probably very obvious questions but I am a little out of my depth.
1) What does installing a custom recovery involve?
2)How would I backup the EFS directory? When I had ES file explorer I would have been able to try and find it. However, as it is I do not know how to find the directory and back it up. I have connected the phone to a windows laptop and it shows up as note3 but there are no folders or files visible in either the phone or on the card.
3) What is the procedure to "wipe everything"?
I think the final part I know how to do with ODIN. Just go to download boot and load and run odin with the ROM.
I got the BTU ROM is that not for the UK? I tried looking up what NC2 was but did not really find anything the explained what it is.
Thanks again and sorry for the ignorance on my side.
Let's put the custom recovery and all that on the back burner for now.
Was your phone unlocked from the factory or did you get it from a carrier? If from a carrier, which, and is it unlocked now or you are still using it with the original carrier? This one is for Vodaphone http://www.sammobile.com/firmwares/3/?download=27401 but if you are unlocked, it should work anyway, I believe.
Thanks to the people for their replies. I managed to solve the issue as below.
As mentioned previously I had flashed using ODIN and BTU version of N9005XXUENB7. The only other thing that was then required was to enter the recovery (I think power + volume up + home and then release power once samsung name appears). I then selected wipe data/factory. A reboot later and everything was solved.
es0tericcha0s said:
Sounds like a bit of a pickle. Since you know that Odin is working and the firmware you have at least flashes correctly, I'd consider installing a custom recovery, backing up EFS folder (and the rom too, just in case there is some weird issue with Odin the 2nd time around) , then wipe everything - /system included. This will make your phone not be able to boot up at all because it will wipe the OS off. Then just boot directly to Download and redo the firmware flash. Something else to consider since you do have the international version, is that some of the firmwares you install might be more carrier or region specific, so there might be a better option to install. I know that there is a some slightly newer version that has NC2 in it as I was trying to fix one of these phones the other day that could not register on any network and ran across that build. Do you remember the build number of the software before you started modding?
Click to expand...
Click to collapse
Hi, The other day i tried to fix the Platform.xml. on my S5. i noticed sometime after that when i move files using the "My files" app, the phone would not refresh the files so that they would show up in gallery, videos etc.. I tried to undo the Media_rw by using SD Maid to find the Platform.xml and Axel to rewrite the Xml. In the platform.xml. i deleted the Media_rw and replaced the old xml with the old (original) one. I rebooted my phone. On swiping to open the screen i noticed alot of apps crashing one after the other. I when back to SD Maid and searched for Platform.xml and opened it with Axel but it said file not found.. i can not use the internet, i cant use most apps, i cant even use the Kies on my computer. I cant save anything to the storage either. I really need help. Odin is the only thing i can use. but i dont know how i can reset the xml files on my phone.. What exactly am i do to?
please
christaph3r said:
Hi, The other day i tried to fix the Platform.xml. on my S5. i noticed sometime after that when i move files using the "My files" app, the phone would not refresh the files so that they would show up in gallery, videos etc.. I tried to undo the Media_rw by using SD Maid to find the Platform.xml and Axel to rewrite the Xml. In the platform.xml. i deleted the Media_rw and replaced the old xml with the old (original) one. I rebooted my phone. On swiping to open the screen i noticed alot of apps crashing one after the other. I when back to SD Maid and searched for Platform.xml and opened it with Axel but it said file not found.. i can not use the internet, i cant use most apps, i cant even use the Kies on my computer. I cant save anything to the storage either. I really need help. Odin is the only thing i can use. but i dont know how i can reset the xml files on my phone.. What exactly am i do to?
please
Click to expand...
Click to collapse
Hey, I was wondering if you ever got a fix on this without factory reset. I am having the exact same issue.
Same boat here. Please someone help!
woahs said:
Hey, I was wondering if you ever got a fix on this without factory reset. I am having the exact same issue.
Click to expand...
Click to collapse
I am having exact same problem. After editing the platform.xml, my Note 3 is behaving the same way: no access to any storage area (including USB drive), no remote access/online access (even though WIFI and 4G appear to connect just fine), most apps fail with 'Unfortunately ... has stopped' error message, no Google Play...
I really don't want to do a factory reset, but really, does it even help? Is there a way to put the platform.xml back? Is there a way to access the phone via USB cable?
vbcomer said:
I am having exact same problem. After editing the platform.xml, my Note 3 is behaving the same way: no access to any storage area (including USB drive), no remote access/online access (even though WIFI and 4G appear to connect just fine), most apps fail with 'Unfortunately ... has stopped' error message, no Google Play...
I really don't want to do a factory reset, but really, does it even help? Is there a way to put the platform.xml back? Is there a way to access the phone via USB cable?
Click to expand...
Click to collapse
Update: I went ahead and successfully install the all-in-one file to the phone via Odin, but it still has the same issues. Can someone give a hint? thanks
FIX!!!
Hi I'm a god at searching(hence the Go)but an Noob(hence the obie) to Dev on Android but a computer techy(in other words I fix computers upgrade ETC.) Now if you followed EXACT instructions you SHOULD have the Backup copy of platform.xml. If not reply and I'll give those instructions.
So I did the same as this post did to get my issue as well but there's a SOLUTION I just found W/o getting rid of your loved files and its easy!
1. Download the ADB also included in The Android SDK by Google (approx. 3XX MB)
2. DOWNLOAD Root Explorer.APK
3. Extract ADB Dev kit( name should be roughly adt-bundle-windows-x86_64-20140702.zip)Note: I prefered it at C:\Android it avoided Name too long error
4. Open CMD Type: cd C:\<location ADB was extracted>\sdk\platform-tools(if you followed my note it will be "C:\Android\adt-bundle-windows-x86_64-20140702\sdk\platform-tools") and press enter... HINT TO COPY PASTE IN CMD RIGHT CLICK SAVES TIME!!!!
5. Install Root Explorer so you can backup your files(if any) I was unlucky having none on the phone but SD storage is ok!
To do this type ADB INSTALL <Location of Root explorer.exe> For standard windows users with default download locations it would be "C:\Users\<USER NAME>\Downloads\Root Explorer v3.1.9.apk" <COPY PASTE
6. Copy the original back to System>ETC>Permissions and overwrite
7. Factory reset!
Links?
sorry guys bt i have the same note 3 and i delete the platform.xml file .....i did a factory reset bt nothing happened ...can u help plz
Re:FIX!
But you have to set the permissions of platform.xml as 0777.Right?
Step 5 how should it works
Android Goobie said:
Hi I'm a god at searching(hence the Go)but an Noob(hence the obie) to Dev on Android but a computer techy(in other words I fix computers upgrade ETC.) Now if you followed EXACT instructions you SHOULD have the Backup copy of platform.xml. If not reply and I'll give those instructions.
So I did the same as this post did to get my issue as well but there's a SOLUTION I just found W/o getting rid of your loved files and its easy!
1. Download the ADB also included in The Android SDK by Google (approx. 3XX MB)
2. DOWNLOAD Root Explorer.APK
3. Extract ADB Dev kit( name should be roughly adt-bundle-windows-x86_64-20140702.zip)Note: I prefered it at C:\Android it avoided Name too long error
4. Open CMD Type: cd C:\<location ADB was extracted>\sdk\platform-tools(if you followed my note it will be "C:\Android\adt-bundle-windows-x86_64-20140702\sdk\platform-tools") and press enter... HINT TO COPY PASTE IN CMD RIGHT CLICK SAVES TIME!!!!
5. Install Root Explorer so you can backup your files(if any) I was unlucky having none on the phone but SD storage is ok!
To do this type ADB INSTALL <Location of Root explorer.exe> For standard windows users with default download locations it would be "C:\Users\<USER NAME>\Downloads\Root Explorer v3.1.9.apk" <COPY PASTE
6. Copy the original back to System>ETC>Permissions and overwrite
7. Factory reset!
Links?
Click to expand...
Click to collapse
Hi have next message in the install root step could you help me please
Android Debug Bridge version 1.0.31
-a - directs adb to listen on all interfaces for a connection
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <specific device> - directs command to the device or emulator with
the given
serial number or qualifier. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
-H - Name of adb server host (default: localhost)
-P - Port of adb server (default: 5037)
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push [-p] <local> <remote>
- copy file/dir to device
('-p' to display the transfer progress)
adb pull [-p] [-a] <remote> [<local>]
- copy file/dir from device
('-p' to display the transfer progress)
('-a' means copy timestamp and mode) adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward --list - list all forward socket connections.
the format is a list of lines with the followin
g format:
<serial> " " <local> " " <remote> "\n" adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only) adb forward --no-rebind <local> <remote>
- same as 'adb forward <local> <remote>' but fails
if <local> is already forwarded
adb forward --remove <local> - remove a specific forward socket connection
adb forward --remove-all - remove all forward socket connections
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-d] [-s] [--algo <algorithm name> --key <hex-encoded ke
y> --iv <hex-encoded iv>] <file>
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-d' means allow version code downgrade)
('-s' means install on SD card instead of inter
nal storage)
('--algo', '--key', and '--iv' mean the file is
encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all]
[-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>
.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-obb|-noobb enable/disable backup of any installed apk expansion
(aka .obb) files associated with each application; the default is noobb.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.) adb restore <file> - restore device contents from the <file> backup
archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1 [parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.

Mtknoled.apk

Hi guys,
i have a problem. I did execute the mtknoled.apk becoause oft some battery issues.
And the result was not gold, because my battery Problem still was not fixed, and the notification light was disabled.
Now I want my led notification work again.
Can someone help me out, with an apk which enables the led again?! Would be great!
THX in advance
Not sure if this is still needed but here's what worked for me:
1) install and launch Minimal ADB and Fastboot;
2) once the phone is connected and recognized, execute
Code:
adb shell settings put system notification_light_pulse 1
You can verify the result with:
Code:
adb shell settings get system notification_light_pulse
It will give "0" if disabled and "1" if enabled.

[GUIDE] How to connect adb over wifi

Heres how to connect to android wear using adb over wifi, theres still some issues, so ill put it here and if someone has some information please share with us:
On wear:
Go to config -> about -> tap the version umber 7 times (it will enable dev options)
Now go back to config menu
Go to developer options
Enable adb (it will also enable the option adb over bluetooth)
On phone:
Open android wear app
Tap the cog icon
Enable Debug over wifi -> Check that the host will be connected (its the android wear)
Now open cmd (you will need to have adb on your path variable):
adb forward tcp:4444 localabstract:/adb-hub
adb connect localhost:4444 // if this gives an error try replacing localhost with 127.0.0.1
adb -s localhost:4444 tcpip 5555 // if this gives an error try replacing localhost with 127.0.0.1
On phone:
Disable adb over bluetooth
Disable bluetooth
On wear:
Go to config -> developer options -> disable the option auto change wifi state
Go to wifi, connect to your wifi
still on wifi, theres an advanced options, there you can get your ip address
on cmd:
adb connect 192.168.1.3:5555 // replace 192.168.1.3 with your android wear ip
THE PROBLEM:
Android wear keeps desconnecting the wifi for a lot of reasons, some that i know:
It detect bluetooth connection (its an automatic power save feature)
But even if you disconnect from bluetooth, sometimes it keep disconnecting.
THE SOLUTION:
I have found a feature under developer options named: Enable wifi state change. This is enabled by default, so disabling it should prevent the wear from disconnecting from wifi, and it does. But sometimes android wear auto enable this feature, even if you turn it off manually. If someone know something about it, or another way to prevent wifi disconnection, please share with us.
On phone:
Open android wear app
Tap the cog icon
Enable Debug over wifi -> Check that the host will be connected (its the android wear)
==============================
Unfortunately doesn't work on my phone, cannot find the "Debug over wifi" option, only Debug over bluetooth available.
The same here!! How did you proceed?
Do you know if there is any way to figure out the port being used?
sagits2016 said:
adb connect localhost:4444 // if this gives an error try replacing localhost with 127.0.0.1
Click to expand...
Click to collapse
Thank you SO MUCH!! I have been trying to connect my watch for days!

Script to Hide System Apps from Launcher - Stock English Firmware

Hello,
Even tho I am very upset because my brand new Amazfit Pace has broken GPS (courtesy of GearBest, I am requesting a DOA replacement), here is a (maybe) useful script to hide unused system apps from launcher, either builtin or custom one. Made for 1.3.4f US firmware but may work with other versions (it may not hide all apps tho).
You can do it wirelessly if you enable watch's WiFi and keep screen on (anox' PaceOn app from XDA recommended):
Code:
adb connect WATCH_IP
where WATCH_IP is your actual IP on watch. Then uncompress the file and move it to where you have adb:
Code:
adb push amazfit_hide_apps.sh /sdcard/
or copy it to watch's internal memory (/sdcard), then:
Code:
adb shell sh /sdcard/amazfit_hide_apps.sh
If you want to get the log file:
Code:
adb pull /sdcard/loghide.txt
As a bonus, this Java app can be used to view and control watch via ADB only:
https://github.com/MajeurAndroid/Adb-Remote-Screen
Cheers

Controle a tablet remotely with ADB

I have a small local network:
• A router not connected to the Internet
• 20 tablets that connect to it
• a computer under linux with LAMP
• a computer under windows with WAMP
When I want to install new apps on the tablets, I have to plug them one by one into a computer and run ADB commands. Would it be possible to execute these commands over WiFi? All tablets are rooted and the network is secure because there is no internet access. So I wouldn't be afraid to use security holes to carry out adb commands over WiFi.
Example of remarkable ADB commands:
• Place files on the tablet: adb push C:/APPLICATIONS/TitaniumBackup/ /sdcard/
• Install several applications: for %f in (C:\ APPLICATIONS\*.Apk) do adb install -t -g -r "%f"
• Start an application: adb shell am start -n com.package.name/com.package.name.ActivityName
•take photos
• activate or deactivate wifi
• Re-boot the tablet: adb reboot
• etc.
I would like to be able to do this on all 20 tablets via the wifi network rather than plugging them one by one into my computer.
Thank you in advance for any ideas you can share with me.
Michael5713 said:
I have a small local network:
• A router not connected to the Internet
• 20 tablets that connect to it
• a computer under linux with LAMP
• a computer under windows with WAMP
When I want to install new apps on the tablets, I have to plug them one by one into a computer and run ADB commands. Would it be possible to execute these commands over WiFi? All tablets are rooted and the network is secure because there is no internet access. So I wouldn't be afraid to use security holes to carry out adb commands over WiFi.
Click to expand...
Click to collapse
Keyword: Wireless ADB. See also here.
Michael5713 said:
I have a small local network:
• A router not connected to the Internet
• 20 tablets that connect to it
• a computer under linux with LAMP
• a computer under windows with WAMP
When I want to install new apps on the tablets, I have to plug them one by one into a computer and run ADB commands. Would it be possible to execute these commands over WiFi? All tablets are rooted and the network is secure because there is no internet access. So I wouldn't be afraid to use security holes to carry out adb commands over WiFi.
Example of remarkable ADB commands:
• Place files on the tablet: adb push C:/APPLICATIONS/TitaniumBackup/ /sdcard/
• Install several applications: for %f in (C:\ APPLICATIONS\*.Apk) do adb install -t -g -r "%f"
• Start an application: adb shell am start -n com.package.name/com.package.name.ActivityName
•take photos
• activate or deactivate wifi
• Re-boot the tablet: adb reboot
• etc.
I would like to be able to do this on all 20 tablets via the wifi network rather than plugging them one by one into my computer.
Thank you in advance for any ideas you can share with me.
Click to expand...
Click to collapse
Yes, android supports ADB over WiFi.
Do a google search for:
"ADB over Wifi"
Sent from my SM-S767VL using Tapatalk
Yes, indeed, the answer was easily found on the web. I asked it because that day I split one big issue into several smaller ones to post requests on your forum. And I never imagined it would be so easy to connect 20 tablets to each other using a local wifi network and adb. The app jwoegerbauer recommended to me is just wonderful. Now I can:
- simultaneously install an application on the 20 tablets from my PC:
FOR /F "skip=1" %x IN ('adb devices') DO start adb -s %x install -r "my-apk.apk"
- uninstall an application on the 20 tablets
- place folders or files I want where I want on all the tablets (they are rooted):
FOR /F "skip=1" %x IN ('adb devices') DO start adb -s %x push C:/my-file/ /sdcard/
- take a file from each tablet or delete it
- even take a screenshot of the tablet I want:
adb -s 192.168.43.122:5555 shell screencap /sdcard/testadb/screen.png
or 20 tablets:
FOR /F "skip=1" %x IN ('adb devices') DO start adb -s %x shell screencap /sdcard/testadb/screen.png
Many thanks to jwoegerbauer for recommending the Wireless ADB application to me.
However, I would like to explore the matter further. The problem I'm looking to solve is to manage a group of tablets without internet and without having to pay an MDM (Android mobile device manager). With ADB, I can install and uninstall applications and send or receive files. Here is what remains to be done:
- I am learning how to remotely change the settings of my 20 tablets. Imagine how tedious it is to turn on the wifi on each of the tablets, then select a network and enter the password. Sometimes I need to turn off wifi or change networks on all tablets. I also have to change the default display or font size. Last week, I've had to set the time and time zone on each one because "network provided time" does not work in a local area network not connected to the Internet. I will tell you which adb formulas I have tested if anyone is interested.
- I also started an other thread on xda-developers: Remotely modify the settings of an android application. Indeed, it takes a plenty of time to manually change the preferences and datas of an application already installed on 20 tablets. If you have any ideas on this, I'd be happy to read your ideas on the forum.
AFAIK USB hubs with 20 ports exist

Categories

Resources