Related
hi anyone knowns how to do that?
thanks in advance.
Sent from my XT925 using xda app-developers app
lhernand45 said:
hi anyone knowns how to do that?
thanks in advance.
Sent from my XT925 using xda app-developers app
Click to expand...
Click to collapse
Had same problem, this worked for me:
You Need:
PhoenixSuit
1) Install PhoenixSuit
2) Disconnect USB
3) Shut down tablet (Hold power for 10 sec)
4) Press and hold Home-button
5) Connecting USB (keep holding down Home button)
6) Press Power button 10-15 timer (While still holding down Home)
Now 1 of 2 thing happen
If 1: PhoenixSuit pops up and askes, want to reset? - Press yes.
If 2: Nothing.
7) Download stock Ainol firmware
8) Try to update tablet via PhoenixSuit (PhoenixSuit will say that i cant connect to tablet, but ask you to do step 1-6)
9) Do steps 1-6, and it should work this time. (well, did for me)
Hope this helps, else i got nothing
//DNN
DNN said:
Had same problem, this worked for me:
You Need:
PhoenixSuit
1) Install PhoenixSuit
2) Disconnect USB
3) Shut down tablet (Hold power for 10 sec)
4) Press and hold Home-button
5) Connecting USB (keep holding down Home button)
6) Press Power button 10-15 timer (While still holding down Home)
Now 1 of 2 thing happen
If 1: PhoenixSuit pops up and askes, want to reset? - Press yes.
If 2: Nothing.
7) Download stock Ainol firmware
8) Try to update tablet via PhoenixSuit (PhoenixSuit will say that i cant connect to tablet, but ask you to do step 1-6)
9) Do steps 1-6, and it should work this time. (well, did for me)
Hope this helps, else i got nothing
//DNN
Click to expand...
Click to collapse
Relax guys. I need a bit of advice from you experts around. Onda unfortunately isn't available in my country and they say it's not being imported anymore due to problems.
So this is where I end up.
I need help choosing Ainol Novo 9 Spark or Ainol Novo 10 Eternal (known as Captain with 2GB ram and 1200x800 display)
I like the Novo 9 Spark but I read it has wifi problems ( which im not sure is hardware or software) and low speaker volume and it's retina display eats a lot of battery, doesn't support all apps and isn't good for 3D gaming.
Where as Eternal (Captain) has no WiFi problems until now (supports 150mbps), a better battery life (11000 Mah) and as its 1200x800 display it is much faster and has a decent volume. But it has a cheap poor performance CPU ATM 7029 and poor GPU GC 1000. As its new it lacks custom roms and stock repacks too ..
Which one should I go for?
I'll be buying either one this week.
Sent from my GT-I9105
Sent from my GT-I9105
To buy or not to buy
Properly the wrong post for this, but short:
- Do you like to "play around" with your tablet (setting up, installing new firmware, clocking ...)
- Expect to surf internet, read stuff and watch movies alot? (where the Retina display realy comes to life)
My experience is, that stock Ainol 9 suckes; terrible software/firmware.
An update to "Rom by x-calibur sdk 3.2 Yandex 0718" transformed my Novo 9 to not only a usable tablet, but acually a pretty good one.
Games it plays, see: http://forum.xda-developers.com/showthread.php?t=2175446 - All games i have tried works.
Hardware is fine, not the best, not the worst - (but then again, cant expect top-end hardware in a cheap-end tablets); all in all i find it more than adequate.
Especialy the Retina display realy does af difference, crisp clear, but comes at a cost, more work fore the CPU = shorter battery time and less speed - I find it worth it, still get 7-8 hours gaming at max brightness.
Worst Things:
- Wifi antenna is not the best, with at desent router/accespoint you get ok signal (40-60 %), but if you have a big house and low wifi signal in some parts of your house, this might not be the tablet for you. - Its a Hardware problem, so no easy fix, its possible to replace the antenna, but its not a big enough problem fore me to start disasembeling my tablet.
- Play store wont recognize tablet properly - Basicly i cant download anything i have to pay fore, amazon app store works, but just not the same - I get by with downloading apk and donating.
I have no experience with the Novo 10.
//DNN
Thank you, have to learn knowledge.
Same problem
Sorry for my english. I got a Ainol Spark 9 updated to 4.2.2 with TWRP recovery. It turns off suddenly and when I try to turn on appears boot loop. I tried to update via PhoenixSuit pressing home button, conecting USB cable to PC and pressing 10 times nothing happens, Phoenix does not recognize the tablet.
Any suggestion? there is any way to hard reset the tablet pressing buttons?
Same problem with recognize the tablet
Mobeca said:
Sorry for my english. I got a Ainol Spark 9 updated to 4.2.2 with TWRP recovery. It turns off suddenly and when I try to turn on appears boot loop. I tried to update via PhoenixSuit pressing home button, conecting USB cable to PC and pressing 10 times nothing happens, Phoenix does not recognize the tablet.
Any suggestion? there is any way to hard reset the tablet pressing buttons?
Click to expand...
Click to collapse
Hi, I have the same problem. Can you help me please?
Thanks.
fiala said:
Hi, I have the same problem. Can you help me please?
Thanks.
Click to expand...
Click to collapse
DNN said:
Properly the wrong post for this, but short:
- Do you like to "play around" with your tablet (setting up, installing new firmware, clocking ...)
- Expect to surf internet, read stuff and watch movies alot? (where the Retina display realy comes to life)
My experience is, that stock Ainol 9 suckes; terrible software/firmware.
An update to "Rom by x-calibur sdk 3.2 Yandex 0718" transformed my Novo 9 to not only a usable tablet, but acually a pretty good one.
Games it plays, see: http://forum.xda-developers.com/showthread.php?t=2175446 - All games i have tried works.
Hardware is fine, not the best, not the worst - (but then again, cant expect top-end hardware in a cheap-end tablets); all in all i find it more than adequate.
Especialy the Retina display realy does af difference, crisp clear, but comes at a cost, more work fore the CPU = shorter battery time and less speed - I find it worth it, still get 7-8 hours gaming at max brightness.
Worst Things:
- Wifi antenna is not the best, with at desent router/accespoint you get ok signal (40-60 %), but if you have a big house and low wifi signal in some parts of your house, this might not be the tablet for you. - Its a Hardware problem, so no easy fix, its possible to replace the antenna, but its not a big enough problem fore me to start disasembeling my tablet.
- Play store wont recognize tablet properly - Basicly i cant download anything i have to pay fore, amazon app store works, but just not the same - I get by with downloading apk and donating.
I have no experience with the Novo 10.
//DNN
Click to expand...
Click to collapse
Mobeca said:
Sorry for my english. I got a Ainol Spark 9 updated to 4.2.2 with TWRP recovery. It turns off suddenly and when I try to turn on appears boot loop. I tried to update via PhoenixSuit pressing home button, conecting USB cable to PC and pressing 10 times nothing happens, Phoenix does not recognize the tablet.
Any suggestion? there is any way to hard reset the tablet pressing buttons?
Click to expand...
Click to collapse
Try reinstalling the rom and then, before rebooting, wipe the dalvik again. Others were having the same problem (with the Onda V972 - the same tablet) and this seemed to sort them out.
my ainol is not starting
i was doing a firmware update on my ainol novo spark using pheonix suit and usb was disturbed during upgrade and since then my ainol is not working.not even showing any display not even that of charging.can anybody help please?
ainol novo spark stuck on cyanogenmod
hello im having problem with ainol novo spark white i know this is a old subject but need help if anybody out there can help
i tried to update my tablet with 10.1 cyanogenmod and it worked but keep saying google play has stopped so i tried to download it and it didnt go in same thing long story short i rebooted several times and it got stuck on cyanogenmod logo i tried phonex suite package and it won reconized the device i tried every method im stuck please help
Well, my Spark died as you know so I contacted to seller online who sold me the device about my problem. Then they ask me for some info and pics showing the issue I sent back the tablet to warranty replacement and a couple months later they sent me a new tablet. I just spend the cost of shipping to China, that's all.
hard reset
When the tablet is completely off
1. Hold the Volume down button
2. Press and hold the power button. You will see a battery appear and a hear a beep shortly after. Release after about 15 seconds.
3. The device will now boot into boot loader with ability to hard reset.
dead bricked spark 9 tablet
mickrick said:
Try reinstalling the rom and then, before rebooting, wipe the dalvik again. Others were having the same problem (with the Onda V972 - the same tablet) and this seemed to sort them out.
Click to expand...
Click to collapse
hi All,
my SPARK 9, AINOL NOVO tablet started freezing repeatedly, and kept displaying that apps downloaded from google playstore were no longer compatible and stopped working. soft factory resets did not solve the problem as the apps kept misbehaving as before. i had to force close it after another episode of freezing by pressing down the power button. after this, the tablet did not come on again.
the tablet now shows the following symptoms:
1. not recognized by PC or phoenix software
2. does not display battery charging icon when connected to charger but tablet becomes warm after some time.
3. i have read that in order for phoenix software to recognize the tablet, one must use a screwdriver to bridge certain pins, but before proceeding , the pin configuration of the chipset in the tablet should be identified -as my tablet is also AINOL, but the spark 9-so i am posting the chipset pictures, pls if this procedure will work with the spark 9 kindly assist. i have tried to upload the pictures of the motherboard showing the two NAND FLASH chips on board, but the link does not display paths on my laptop but rather a URL.
there are 2 flash NAND's on the motherboard with these serial numbers"
SK hynix
H27UCG8T2BTR
BC 309AA
M12KG9320H & M12KH8120H
i have downloaded this rom: Novo9-Spark-LX-20130422v1-1, i hope to flash it to the tablet once phoenix can recognize the tablet.
thanks.
thanks.
Hi guys
I have just purchased the Pipo M6 Pro (Which has built in GPS) from Pipomall.
Even though the the battery is fully charged. I still cant get the unit to turn on. Tried the on/off button by holding it in many times.
Anyway finally the reset button resets it and that does work. I'll go away for 10 or so minutes and try to turn the device off standby mode to which it does not do anything. Makes me think tha unit is off so i then try to turn it on by holding the button down for 5 seconds. Nothing. Only a 'reset' at the back of the unit turns it on.
I have got onto Pipomall where i bought it from about this.
They have directed me to this website to a firmware upgrade. However the firmware upgrade doesnt exist for the M6 Pro. Only for the M6.
I really need a firmware for the M6 Pro in English as this is the one that has GPS & built in 3G.
I am guessing the firmware upgrade is my only option? Unless theres any other suggestions you can think of?
Quite disappointed about this.
If i can't upgrade it i'll have to send it back i think.
Thanks.
Where can I download the firmware?
Thanks for the help people.
I have done the factory reset.
Gonna wait some time and see if the issue occurs.
If it does i iwll do the upgrade,
If the upgrade fixes the issue i will let you all know that its worked ok.
Thanks so much again
MartK87 said:
Thanks for the help people.
I have done the factory reset.
Gonna wait some time and see if the issue occurs.
If it does i iwll do the upgrade,
If the upgrade fixes the issue i will let you all know that its worked ok.
Thanks so much again
Click to expand...
Click to collapse
Is your M6 Pro performing satisfactorily now? Would be great if you could give us a short review of it as there aren't any online yet. I'm particularly interested in knowing if the GPS is any good. Thanks
I have an s1 pro and it will charger but not power on. I tried the upgrade tool but I keep getting IDB fail. Can anyone help. The tech guy says I have to keep guessing with the buttons during the upgrade till I find the flash.
Sent from my XT907 using XDA Premium 4 mobile app
MartK87 said:
Hi guys
I have just purchased the Pipo M6 Pro (Which has built in GPS) from Pipomall.
Even though the the battery is fully charged. I still cant get the unit to turn on. Tried the on/off button by holding it in many times.
Anyway finally the reset button resets it and that does work. I'll go away for 10 or so minutes and try to turn the device off standby mode to which it does not do anything. Makes me think tha unit is off so i then try to turn it on by holding the button down for 5 seconds. Nothing. Only a 'reset' at the back of the unit turns it on.
I have got onto Pipomall where i bought it from about this.
They have directed me to this website to a firmware upgrade. However the firmware upgrade doesnt exist for the M6 Pro. Only for the M6.
I really need a firmware for the M6 Pro in English as this is the one that has GPS & built in 3G.
I am guessing the firmware upgrade is my only option? Unless theres any other suggestions you can think of?
Quite disappointed about this.
If i can't upgrade it i'll have to send it back i think.
Thanks.
Click to expand...
Click to collapse
Hi!
Have you found a solution for the reset button because mine does the exact same thing.
Mel
Hello,
I bought a PIPO M6 pro too,
Actually two of them. Both have the same issue: the day it arrived they turned on, without problems.
After some hours I put them under charge... and after that, they don't turn on anymore.
No sign of life.
I tried with the reset button, reset-On/Off button combo, any other combinatrion of buttons...
Nothing happens.
What should I do? Did anyone have the same issue?
Ah.. first one I send it back to the seller.. the second one is the substitute! (
Thanks in advance,
Alessandro
I got the sumvision voyager 2 which is the same as the m6 pro but rebadged for the UK. Its a rocking tablet especially once you put a custom ROM on it. There's plenty of developers around, though unlike my old archos g9 there doesnt seem to be any on here. We have overclocking ROMs and overclocked ram roms to get rid of any lag, which to be fair from stock I haven't experienced. Though mine has the app memory modded to 4gb from 2gb, the ROM I use can go up to 16gb for apps if necessary. Compared Tony old 1gb/16gb G9 Turbo this tablet really blows it away especially on the display and battery life.
Pipo firmware is available on the .cn pipo websitewebsite
Lostra73 said:
Hello,
I bought a PIPO M6 pro too,
Actually two of them. Both have the same issue: the day it arrived they turned on, without problems.
After some hours I put them under charge... and after that, they don't turn on anymore.
No sign of life.
I tried with the reset button, reset-On/Off button combo, any other combinatrion of buttons...
Nothing happens.
What should I do? Did anyone have the same issue?
Ah.. first one I send it back to the seller.. the second one is the substitute! (
Thanks in advance,
Alessandro
Click to expand...
Click to collapse
May the charger is bad? so the tablet can't turn on
Hello friends I have already more than 3 months with the phone so brick paperweight, I led him to more technical 7 where live in santa barbara de barinas-Venezuela, also went to the neighbouring cities and nothing in any side give me solution most say is the screen I really very much doubt it because that made long before that big donkey to install the twrp when already had the CWM as recovery. I have read forums and forums and I'm trying to do it through gives you the ADB, I want to fix my phone because it buy a new one in my country currently with our monetary situation is buy a new cell phone and hold 1 year of hunger... to be able to buy it. do I hope that if some expert in android 4.4 software. 4kitkat read this I throw hand, and friends else this case is cataloged as a SoftBrick, HardBrick or a BootLoop? Thanks again and Merry Christmas to all. Here below I explain what happened. Buy the Samsung Galaxy Grand prime duos SM-G530H with android 4.4.4 as two weeks ago, as you can see this practically new what happened was the following rootee the terminal as it had already done in my terminal most everything went well. then download the TWRP MANAGER application from the store play gave him super user permissions and locate a TWRP recovery for the grand prime not found for model SM-G530H. There was when I made the stupid more large I have echo I found recovery for other models of samsung and download the recovery for the Grand duos the download and cell phone install it from the same application I turn off and turned on the screen but this look with blue screen with black and vibrates and turns off and again it does the same thing again and again you can see and not start. promise them is that not come to think that my cell phone was going to stay dead, the issue is to remove the battery if so have worked and the same. attempt to start mode recovery and not or it worked I was the same lit blue screen with black and vibrated and turned off. so I spent in download mode, lit in blue with black screen and turned off. Friends I am desperate because I tried everything and not me because I've taken the battery more thousand times, pc does not recognize me the device that simply does not fit into download mode. not load by gets blue screen with black. try a USB jig you buy from eBay and not worked a and also one of the technical goals that the to revised happened a jtag I think q is called so is seemed to a usb jing but saw that the changed him as voltages but none worked and told men that this fried. So no longer will be if they had some experience regarding my case would appreciate... translated by google
Did you get this sorted out ?
Sent from my SM-G530H using XDA Forums
[sm-g530bt] I am exactly with the same problem : /
haet2016 said:
Hello friends I have already more than 3 months with the phone so brick paperweight, I led him to more technical 7 where live in santa barbara de barinas-Venezuela, also went to the neighbouring cities and nothing in any side give me solution most say is the screen I really very much doubt it because that made long before that big donkey to install the twrp when already had the CWM as recovery. I have read forums and forums and I'm trying to do it through gives you the ADB, I want to fix my phone because it buy a new one in my country currently with our monetary situation is buy a new cell phone and hold 1 year of hunger... to be able to buy it. do I hope that if some expert in android 4.4 software. 4kitkat read this I throw hand, and friends else this case is cataloged as a SoftBrick, HardBrick or a BootLoop? Thanks again and Merry Christmas to all. Here below I explain what happened. Buy the Samsung Galaxy Grand prime duos SM-G530H with android 4.4.4 as two weeks ago, as you can see this practically new what happened was the following rootee the terminal as it had already done in my terminal most everything went well. then download the TWRP MANAGER application from the store play gave him super user permissions and locate a TWRP recovery for the grand prime not found for model SM-G530H. There was when I made the stupid more large I have echo I found recovery for other models of samsung and download the recovery for the Grand duos the download and cell phone install it from the same application I turn off and turned on the screen but this look with blue screen with black and vibrates and turns off and again it does the same thing again and again you can see and not start. promise them is that not come to think that my cell phone was going to stay dead, the issue is to remove the battery if so have worked and the same. attempt to start mode recovery and not or it worked I was the same lit blue screen with black and vibrated and turned off. so I spent in download mode, lit in blue with black screen and turned off. Friends I am desperate because I tried everything and not me because I've taken the battery more thousand times, pc does not recognize me the device that simply does not fit into download mode. not load by gets blue screen with black. try a USB jig you buy from eBay and not worked a and also one of the technical goals that the to revised happened a jtag I think q is called so is seemed to a usb jing but saw that the changed him as voltages but none worked and told men that this fried. So no longer will be if they had some experience regarding my case would appreciate... translated by google
Click to expand...
Click to collapse
Can you solve it? I am exactly with the same problem: /
I installed TWRP and my GRAND PRIME does not turn on. It does not go into fast boot mode. Only a blue and vibrating light is blinking.
Video Link:
https://www.youtube.com/watch?v=vM_9warqENU
Hi all,
after 3 days of searching, maybe I've found something sounds good, but I'll stay in test mode for a while and I'll keep you in touch in case it is really stable.
What's happend :
3 days ago I did a simple ''factory reset'' and since then I experience a continous reboots after a minute or two alive in Android official 6.0.1 and a bootloops when processor cames really hot.
At this time on internet you can find lots of people with the same issue and all of us without any solutions at all.
Now here the list of my tries :
- Did again a ''factory reset'' with Sony companion and Sony flashtool Emma : no changes
- Call Sony for support? Warranty still okay? : do not waste your time, Sony wants your money and thats it ! (take a try anyway, you will see by yourself)
- So let's root the phone! Even if you do not know what to do, you can find looots of Tutorials and lots of very geek competent guys to help you (better than Sony support anyway), thanks XDA Developers !!!
- Even if I've completely erased all partitions with TRWP, when flashing and back again in stock Android with xperifirm : still no changes !!!
Now, during those tries I've noticed that the temperature of processor is dangerously high, and that for every startup process.
You know, at the end I think that the bootloop (I guess in that case only) it is made by temperature mainboard automatic protection.
Anyway, before to play freesbee with and go to buy a new one, I've tried to :
- open the back side (very simple but all operations should made very carefully)
- unplugged the battery for 15 minutes
- take off processor's metal protection to avoid heat retention
- plugged the battery again
- close the back side and started Android
Since then the phone is still alive !!! Just working as it should...
I'm trying all I can do to stress it to see if any problems happend again, installing back all apps, using Root features to uninstall useless Google or Sony apps, restet the phone several times.
The processor still heat up every time you do something or restart, but I do not experiencing sudden rebooting or bootloops again at the moment.
As far as I'm concerned, I would say as well that it is a processor issue, but I'm not a scientist, so I guess this apply to different Xperia models and not only to M4 Aqua Dual.
DO NOT FORGET that this is not a real solution. I just did the only thing that you cannot normally do with that kind of phone : unplug the battery.
I hope I can give some good ideas to all of you, or maybe a good way to a solution .
Happy to share,
Flaximuss
More information please
Well, now I'm sure it is hw problem.
A guy solved this doing some trick:
www(dot)youtube.com/watch?v=mgCSPAmJld4&feature=youtu.be
and it works pretty nice, for a while.
I'm more interested in your solution, how far it didn't bootloop, etc.
Could you tell me how is your phone doing?
I betrayed my Sony Is there any way to bring it back???
banzylaxD said:
Well, now I'm sure it is hw problem.
A guy solved this doing some trick:
www(dot)youtube.com/watch?v=mgCSPAmJld4&feature=youtu.be
and it works pretty nice, for a while.
I'm more interested in your solution, how far it didn't bootloop, etc.
Could you tell me how is your phone doing?
Click to expand...
Click to collapse
So, I will explain what has happened.
I received a Warning Statin "Unfortunately, Hike as stopped" followed by "Unfortunately Google has stopped" "Unfortunately home has stopped"...
So I shut my phone off, which I used to do every time and restarted it.
My what happened next is something I haven't experienced before.
My Xperia, just displayed "SONY" logo and nothing else. I know to flash and I have done that many times before. So I was lethargic that I could easily bring my sony back to the world. but that didn't happen anyway :crying: :crying:
I read so many threads in XDA but none of them could have faced what I'm facing. Coz my Sony Xperia Aqua M4 will not vibrate so I couldn't able to differentiate Hard and Soft boot.
After waiting for a restless 24hours I tried to open my Sony Xperia Aqua M4 that's when the real problem started...
I found a video that if we remove the battery and reinsert it then everything will be fine.
so, I removed the back cover.
Flip opened that Copper Layer (I really don't know its purpose though) and unplugged 3 battery plugs. That when the things began to get out of my hand.
After reinserting the plug I started my mobile once again only to see the Sony Logo and not the blue waves. So I tried to restart the mobile by pressing the Rest button near the SD Card Slot only then I came to know it stopped working.
So once again I unplugged the battery and this time I had that copper layer trimmed and replugged the battery.
And this time no Sony Logo too :crying: but I could feel the temperature of metal on the board rising to its peak. I don't know what to do...
Is there a way to make my Sony work again?
Pieces of Advice Please.......
Temporal solution
If you don't want to disarm your phone I got one solution:
1) Press the screen with your thumb and the back panel with index finge, near the nfc logo
2) At the time of starting it helps sometimes.
It is an hardware problem.
The solution worked but...
AnotherGlitch said:
If you don't want to disarm your phone I got one solution:
1) Press the screen with your thumb and the back panel with index finge, near the nfc logo
2) At the time of starting it helps sometimes.
It is an hardware problem.
Click to expand...
Click to collapse
Hi, the phone has started up, however, is there any way to make the solution last?
Please it would be really nice that there is a chance to recover the phone.
gruelth said:
Hi, the phone has started up, however, is there any way to make the solution last?
Please it would be really nice that there is a chance to recover the phone.
Click to expand...
Click to collapse
Of course there is a way to save your phone, but nowadays the process cost more than buying another M4 AQUA used. You can do "reballing" or a little "reflow" in any refurbishing store if you want but I recommend changing that phone. It is not so good to use mate.
Hello everyone
I have Samsung Tab S3 since it's release in 2017 .. and it was a very nice tab till a couple months ago ..
It started restarting by itself .. and it happenes always when I'm not using it or when I'm pausing a video ..
And when I leave it for a couple hours i find out that it's turned off and it can't be turned on till I hard restart it ..
I tried :
Emptying the battery to the end then recharge and didn't work.
Removing SD card and didn't work.
Entering safe mode and still restarted.
Wipe cash partition didn't work.
Factory reset and didn't work.
And finally flash stock ROM with Odin without rooting .. problem not solved
When I put the tab on power saver the restarting takes so much longer to happen ..
Could it be a hardware related thing? Or a battery thing?
Thank you in advanced for your help
*Edit 1 (problem fixed) : I rooted my tablet and installed Kernel Auditor app and changed the governor to Userspace and set the minimum frequency of the CPU to 422 instead of 307 and made the app do the settings change on boot . After this it had not restarted for 3 days.
*Edit 2 lately I flashed lineageOS unofficial 18.1 android 11 into the tablet and edited the big clusters only to interval governor while keeping the small ones with blue schedule. My tablet now is working like a charm with no issue.
Has the battery SOT time noticeably decreased?
If below 80% of its original capacity it's time to replace it.
Any swelling is a battery failure, replace asap.
Changes in charging behavior could indicate a failure as well.
Has it been dropped or exposed to moisture? You see where this is going... mobos can also randomly fail.
Does it happen in safe mode?
Check it to rule out 3rd party apps.
Original rom, don't update the system apps, all power management should be disabled.
Pull SD card if it has one for now before reload.
blackhawk said:
Has the battery SOT time noticeably decreased?
If below 80% of its original capacity it's time to replace it.
Any swelling is a battery failure, replace asap.
Changes in charging behavior could indicate a failure as well.
Has it been dropped or exposed to moisture? You see where this is going... mobos can also randomly fail.
Does it happen in safe mode?
Check it to rule out 3rd party apps.
Original rom, don't update the system apps, all power management should be disabled.
Pull SD card if it has one for now before reload.
Click to expand...
Click to collapse
Thank you for replying
*After the restarting it gets stuck and shuts down and you have to turn it on by (down+power), if you turn it on immediately you have the same battery percentage but if I let it through the night and force turning it on the battery is decreased alot, it looks like when the tab is off after the freezing and restarting it is consuming alot of battery even if it's off.
*I tried the safe mode it still restarts
*I went to the beach 6 months ago and it stopped charging because of the moisture for about a week then it got back to its normal state
*I noticed that When I boot into (downloading mode) or (recovery mode) it stays on for days and doesn't restart or freeze
If you got salt water in it, it's already dead.
Needs to be pulled apart and inspected for corrosion damage. Sorry...
blackhawk said:
If you got salt water in it, it's already dead.
Needs to be pulled apart and inspected for corrosion damage. Sorry...
Click to expand...
Click to collapse
You mean the motherboard or the battery is dead ?
If the mobo got salt water on it or even water in it can destroy it. Current flow greatly accelerates corrosion.
The tab needs be dissembled*, dried and inspected for damage especially where there's high current flow and exposed conductors.
Sooner is better...
*pull battery connector asap
Ruudvan10101 said:
Hello everyone
I have Samsung Tab S3 since it's release in 2017 .. and it was a very nice tab till a couple months ago ..
It started restarting by itself .. and it happenes always when I'm not using it or when I'm pausing a video ..
And when I leave it for a couple hours i find out that it's turned off and it can't be turned on till I hard restart it ..
I tried :
Emptying the battery to the end then recharge and didn't work.
Removing SD card and didn't work.
Entering safe mode and still restarted.
Wipe cash partition didn't work.
Factory reset and didn't work.
And finally flash stock ROM with Odin without rooting .. problem not solved
When I put the tab on power saver the restarting takes so much longer to happen ..
Could it be a hardware related thing? Or a battery thing?
Thank you in advanced for your help
Click to expand...
Click to collapse
I had to replace motherboard
My tablet turns off by itself
Good evening. As the title says, my SM-T820 turns off randomly. I've changed the battery and installed several official firmwares with no luck so I don't know what else I could try, if anybody has any idea please tell me. Thank you so much Kind...
forum.xda-developers.com
blackhawk said:
If the mobo got salt water on it or even water in it can destroy it. Current flow greatly accelerates corrosion.
The tab needs be dissembled*, dried and inspected for damage especially where there's high current flow and exposed conductors.
Sooner is better...
*pull battery connector asap
Click to expand...
Click to collapse
Problem solved
It has been 3 days without a restart
I edited the thread with the fix
zenon21 said:
I had to replace motherboard
My tablet turns off by itself
Good evening. As the title says, my SM-T820 turns off randomly. I've changed the battery and installed several official firmwares with no luck so I don't know what else I could try, if anybody has any idea please tell me. Thank you so much Kind...
forum.xda-developers.com
Click to expand...
Click to collapse
Problem solved
It has been 3 days without a restart
I edited the thread with the fix
How did you root your device what software did you use?
is it still fine?
ThePilotWhoCantFly said:
How did you root your device what software did you use?
is it still fine?
Click to expand...
Click to collapse
Search about lineageOS 18.1 unofficial for tab S3 thread .. you will find all the tutorials to install the custom ROM and root the device ..
Ruudvan10101 said:
Search about lineageOS 18.1 unofficial for tab S3 thread .. you will find all the tutorials to install the custom ROM and root the device ..
Click to expand...
Click to collapse
Ah thank you, not sure if this is true but if you install a custom rom will you will lose functionality of the s-pen?
ThePilotWhoCantFly said:
Ah thank you, not sure if this is true but if you install a custom rom will you will lose functionality of the s-pen?
Click to expand...
Click to collapse
You are welcome
it will still work but the button will stop working .. after all you will get a 2017 tablet to work with Android 11 with an amazing speed and without all that bloatware that were slowing the device. And if you didn't like it you can go back to the stock rom whenever you want .
Ruudvan10101 said:
You are welcome
it will still work but the button will stop working .. after all you will get a 2017 tablet to work with Android 11 with an amazing speed and without all that bloatware that were slowing the device. And if you didn't like it you can go back to the stock rom whenever you want .
Click to expand...
Click to collapse
Right, thank you ill give it a go over the weekend
Ruudvan10101 said:
You are welcome
it will still work but the button will stop working .. after all you will get a 2017 tablet to work with Android 11 with an amazing speed and without all that bloatware that were slowing the device. And if you didn't like it you can go back to the stock rom whenever you want .
Click to expand...
Click to collapse
It worked has not crashed yet and I found that s-pen button thing annoying anyway so thanks again for the help
I sometimes find my S3 has shut down and requires a long press of the power button to boot up. I have not determined the cause. I wonder if just root will allow deleting enough bloatware to make a difference