Hello, recently I've used flashify, and I tried to flash a twrp exclusive file. When I flash it, my phones screen turns black and I cannot power on the phone. Can anyone please help me?
Its sounds like you have flashed the recovery incorrectly. Flashify provides flashing of recovery and boot. Most probably you have flashed recovery in boot mistakenly and thats the cause of your phone not booting up.
your device have a Mediatek helio p60 chip, which makes it possible to reflash things using sp flash tools but before that. You have to fetch stock boot.img for your device to make it work again. Just download the firmware for your device and extract boot.img from it and reflash using sp flash tools.
Make sure to have proper Preloader drivers installed in your system before going ahead otherwise it'll not detect your phone. And the phone must have to be in switched off state. After that load the scatter file in the tool which I believe will come with the firmware package. After loading the scatter you'll see a list of things that will be flashed in your device. Just check or uncheck the things you want to flash. I suggest you to flash both recovery and boot back to stock and it will be running like normal.
Good luck
Happy & safe flashing:fingers-crossed:
Hit thanks if I helped you.:laugh:
Related
Hello. As the title says, I need help flashing a recovery to my Sony Xperia Z Ultra (c8606) with unlocked bootloader. I have tried using FlashTool to flash the TWRP img file found on their website. I connect the phone to fastboot mode, click on Select Kernel to Flash, and select the file labeled: twrp-2.8.5.0-togari. The file flashes, but always softbricks my phone (The LED light flashes red when it is plugged in, and holding down the power button only causes the phone to vibrate briefly every couple seconds). This forces me to re-flash a FTF file (C6806_14.5.A.0.242_Customized USA.ftf) to unbrick. I have tried flashing other kernels (108_DualRec_Jackie099) and other FTF files (C6806_14.3.A.0.681 US_Unbranded.ftf), with the same result.
Can anyone tell me what the problem is and what do I do? I want TWRP recovery installed on my phone (preferably the one found on their website), but everything I have tried just bricks my phone.
Please help me!
Okay, this is a bit complicated TWRP must be flashed to the fota partition of the phone, either using the fastboot command "fastboot flash FOTAKernel image.img" or, if you have rooted your ZU, then install an app called Rashr, open it and install TWRP from the app, just follow the instructions BUT it is useless on stock roms because the stock kernel doesn't support loading a recovery from the fota partition, although all AOSP and CM based roms supports it and there also was a stock kernel that supported it, I have forgotten its name. You were trying to flash the recovery as the main kernel but the system obviously can't boot from it, that is the root of the problem, it would be perfect if it were working that way
Regards
If you're trying to flash recovery or kernels you can use rashr on the play store. If you want twrp download nuts flushable recovery and flash it with twrp manager on the play store.
Hi. I just want to ask about TWRP recovery that is Compatible with my Phone :
Starmabile PLAY Click
Android 5.1 Lollipop
Spreadtrum SC7731
4.5"
Quadcore
Anyone with a Phone with same specs as mine that is using A TWRP ?
Please help. I wanna try yours.
Cant find on google with the same specs with my phone with twrp working.
I have tried those TWRP on google but none of them works. All of them take me Only to the Bootlogo. Only thing i know as of now is i have to port twrp to my stock recovery or to my phone.
Anyone please help.
maucerezo said:
Hi. I just want to ask about TWRP recovery that is Compatible with my Phone :
Starmabile PLAY Click
Android 5.1 Lollipop
Spreadtrum SC7731
4.5"
Quadcore
Anyone with a Phone with same specs as mine that is using A TWRP ?
Please help. I wanna try yours.
Cant find on google with the same specs with my phone with twrp working.
I have tried those TWRP on google but none of them works. All of them take me Only to the Bootlogo. Only thing i know as of now is i have to port twrp to my stock recovery or to my phone.
Anyone please help.
Click to expand...
Click to collapse
Hi Bro,
i have sc7731c (karbonn titanium 3D Plex ) device too. and i have tried many available img but none of them worked this would be because these devices are new and there no suitable recovery available simply because people have not made any till now..
There is many programs that allows u to create a new custom recovery if there is no recovery is available for your device try to goggle it.
On windows, philz magic touch recovery tool, android kitchen recovery image unpacker and so on.
Can i make you custom recovery using your stock image if you're too lazy
as i said above i have been trying to flash online available recoveries and accidentally flashed my stock u could help me out this
can u provide me you stock recovery image file ?
@Maucurezo
Hey dude! Im a pinoy. Im running with my STARMOBILE PLAY CLICK. As same as yours. Im running on the same Spreadtrum SC7731C and I flashed a Custom Recovery but it would only bring me to bootload. I kept finding solutions to get my Stock recovery but failed. We have the same Problem. I need the Custom recovery too. Help us admins
You can try and do it yourself. Porting TWRP and CWM to a new device. You'll need the stock rom for your device or simply make an image "dump" of the system files (boot.img, etc) via adb. Goodluck.
TWRP for sc7731c hope it helps
hi all a have a sc7731c phone on android 6.0 and i was able to install twrp on my device
it all started when i found a stock rom on the web (Google your device for stock - rom or - firmware)
once i had the rom i started searching for a way to extract the stock recovery from the rom
and i found this tool SPD_Upgrade_Tool_R4.0.0001 using this tool i extracted my stock
recovery from the ROM ( recovery.img ) , first stage complete i had a stock recovery
taken from a rom for my phone - brand and model must be right on the stock
firmware/rom or you risk damaging you phone (DO NOT CHEAT PLZ)
ps:wen you unpack the firmware/rom you should get a .pac file
ps:finding my stock rom took me several days of search.
now for STAGE 2 i had a stock recovery a needed to change it
for twrp another few days of search i came across a site
called hovatek here i found a tool to port (change) the
stock recovery to boot the twrp recovery the tool name is
[Hovatek] Spreadtrum (SPD) Auto TWRP Recovery Porter V1.0 by Team Hovatek (x86)
i run my stock recovery with this tool the tool creates a modified recovery on the
output folder( a few kb bigger ) stage 2 done.
STAGE 3
1- a fully working ADB, for this your best option is android-studio
2-turn on USB debuging and OEM unlock in DEV options
3-name the new recovery file recovery.img
4-your device has to be in USB MTP mode
5-if ADB is properly installed and Windows has the correct android device
driver you should be able to use these commands using android-studio's ADB
command-adb devices
-if the device is detected a serial number apears
command-adb reboot bootloader
-the device reboots to a black screen with small white letters saying FASTBOOT mode
command-fastboot devices
-the device displays the serial number again
command-fastboot flash recovery recovery.img
- if all went well it will say successful
command-fastboot reboot
-dont remenber if it booted straight to twrp or if i had to use power + volume up
-by the way on my phone to get in the default recover its 1 second hold power
and then with the power pressed for 1 sec add volume up 3 sec and let go of both
any way it worked i hope it helps ppl with these sc7731c phones
i have twrp 3.0.0 fully working
tips: youtube vídeos on how to use SPD_Upgrade_Tool_R4.0.0001
the hovatek site has a great tutorial on how to use the recovery porter tool
the last part the ADB commands was a ***** as Windows did not install my device
correctly and this is crucial -install phone driver manualy/Google device/Google android device. good luck
ps: all merit goes to the developers of these tool, a great ty to them :highfive:
ps: at the start i did NOT have root, the success flashing the ported twrp recovery
was followed bi the installation of the magisk15.3.zip and voila twrp+root
any one help me i port twrp using adb but after i flash my twrp upside down on sc7731ceb it works fine but the twrp upside down any help me
pauljack2 said:
any one help me i port twrp using adb but after i flash my twrp upside down on sc7731ceb it works fine but the twrp upside down any help me
Click to expand...
Click to collapse
humm,.. as far as i now adb does not port recovery image´s you mean you found an image for sc7731?? phone and there are at least 4 or 5 variations of the sc7731 board and you
flashed it on your phone, by shear luck you did not soft-brick or brick your phone and it actualy Works, :cyclops:
you need to search Google/xda/hovatek site for your brand and model´s stock recovery or even better your custom recovery
or as an alternative your stock ROM/FIRMWARE and then extract the stock recovery from ROM/FIRM port it and flash it
im prety shure someone out there has a phone like your´s and you can , when you find it download the stock recovery - the custom recovery - or the ROM/FIRMWARE file
the hovatek site has a great auto port tool all you need is your stock recovery follow the vídeo simple steps and flash it now that you have root just use
twrp oficial app to flash it ,se my tutorial above it will be easy once you have the stock recovery or rom/firmware
i have a 50 buck cheap phone wierd brand,it took me several days to find the stock rom/firmware once i did all worked just fine no strange stuff
hovetek site also has a lot of rom´s/firmware files for many brands and model´s , again search Google/xda/hovatek for your model + stock recovery or recovery.img, custom recovery.
good luck
i have stock recovery so i copy the recovery from my stock and i use carlivimg so i can unpack my recovery.img but i have really problem on upside down but i work fine i flash supersu on it now i have rooted my phone. my phone by the way is ding ding defi go SC7731ceb i use TWRP 3.0.2.0 it works fine but if you update the latest twrp you have problem on failed mount and .etc
ANY can help that upside down ??? thats my problem now on my recovery
but you can port recovery using fastboot
i commend
c:/adb>adb devices
adb>adb reboot bootleader
adb>fastboot flash recovery recovery.img
thats i port my recovery on sc7731ceb
using pc
pauljack2 said:
i have stock recovery so i copy the recovery from my stock and i use carlivimg so i can unpack my recovery.img but i have really problem on upside down but i work fine i flash supersu on it now i have rooted my phone. my phone by the way is ding ding defi go SC7731ceb i use TWRP 3.0.2.0 it works fine but if you update the latest twrp you have problem on failed mount and .etc
ANY can help that upside down ??? thats my problem now on my recovery
but you can port recovery using fastboot
i commend
c:/adb>adb devices
adb>adb reboot bootleader
adb>fastboot flash recovery recovery.img
thats i port my recovery on sc7731ceb
using pc
Click to expand...
Click to collapse
Go here https://forum.hovatek.com/thread-21669.html try and port again with this tool it worked fine for me.
This friday I got my tablet(lenovo tab 2 a7-10f). Yesterday I decided to install better rom on it. I rooted my device and installed twrp recovery. Unfortunally I didn't quite realize the importance of making back up and the fact that you can't flash this:
https://forum.xda-developers.com/android/software/rom-orionlp-v1-8-lenovo-tab-2-a7-10f-t3480918
on android 4.4. My device loops "lenovo powered by android" screen. I can boot it into TWRP recovery. I have been googling today for a whole day and I havent find any rom to flash it. I tried this:
https://forum.xda-developers.com/an...-stock-lollipop-5-0-roms-lenovo-tab2-t3418835
and I think thing like this for a KiKat (through twrp, probably that's why it doesnt work) .I couldn't quite boot it into fastboot and I can't use sp flash propely or it just simply doesn't work for me. Please help me to find any rom to flash it from twrp, since I am too stupid to do anything different way.
In short it loops, I can boot it to twrp, I just want to unbrick it. The ultimate goal is to propely install this *first link*
Thanks in advance!
maykapal said:
This friday I got my tablet(lenovo tab 2 a7-10f). Yesterday I decided to install better rom on it. I rooted my device and installed twrp recovery. Unfortunally I didn't quite realize the importance of making back up and the fact that you can't flash this:
https://forum.xda-developers.com/android/software/rom-orionlp-v1-8-lenovo-tab-2-a7-10f-t3480918
on android 4.4. My device loops "lenovo powered by android" screen. I can boot it into TWRP recovery. I have been googling today for a whole day and I havent find any rom to flash it. I tried this:
https://forum.xda-developers.com/an...-stock-lollipop-5-0-roms-lenovo-tab2-t3418835
and I think thing like this for a KiKat (through twrp, probably that's why it doesnt work) .I couldn't quite boot it into fastboot and I can't use sp flash propely or it just simply doesn't work for me. Please help me to find any rom to flash it from twrp, since I am too stupid to do anything different way.
In short it loops, I can boot it to twrp, I just want to unbrick it. The ultimate goal is to propely install this *first link*
Thanks in advance!
Click to expand...
Click to collapse
There is a way to flash a now rom with SP flash tool although you can't use sp flash tool propely.
You must open the lid of the tablet and unplugin the battery
(to unpluin the battery simply pull out this)
Then open your SP flash tool, load the scatter file of the rom, press download button, plugin the battery and your pc will start dowloading the rom normally.
HELP!!
TLDR:
I bricked pixi 4-6 8050e by flashing it with SPFT [format all + download] option. Can't go into fastboot, but I can still flash using SPFT). Help please!
At first I was just trying to get root. So I needed to unlock BL the flash recovery (twrp).
But recovery image was wrong so I was stuck at bootloop. I found that there is another working recovery (ctr).
I flashed again, but I'm still stuck at bootloop! At this point all I want is to get the device working, root be damned!
So I tried to find a stock ROM and extract the recovery.img from it. I flashed the stock ROM with SPFT, but I'm still on bootloop.
At this point I'm sweating a lot, but I can still access fastboot.
Then I tried to flash the WHOLE stock ROM by using SPFT [download] option.
After that, I was still stuck at bootloop. Worse, the boot animation for alcatel is now ****ed up, it is not showing properly!
I don't know what to do, I downloaded another stock rom, only to find out that it has the exact same files by using hash checker.
I flashed it 1st with [Download] option but nothing changed.
So I flashed again using [Format All + Download] option on SPFT. This is where I really ****ed up. I now can't even access fastboot! But I can still flash using SPFT.
I downloaded final ROM from xda, but again, it has the same exact files! I again tried to flash it, but nothing still works, cannot even go to fastboot.
I even downloaded Alcatel's mobile upgrade s program to fix, but it says "Read terminal information failed". I'm guessing that it the downloaded preloaded.img from the supposedly stock rom is wrong.
I don't know what to do next.
Please help! If any of you have a stock image that is not the same with kirito9's (link), please I NEEED IT!
Just a little disclaimer: I am an ABSOLUTE NOOB at this stuff and I just followed tutorials and guides; no experience whatsoever and I badly need your help
It all started when I wanted to root my phone. So I decided to install a custom recovery on the phone first(CWM to be exact). I flashed the recovery.img file and soft bricked my phone. I managed to fix it easily just by erasing recovery by using adb. Afterwards, recovery was accessible again. Since I couldn't do it that way, I tried downloading the phone's latest firmware from ASUS' website and pulled the boot.img out of it and patched it with Magisk. Flashed it and boom, bricked my phone. I tried fixing it the same way I did with the recovery.img but it didn't work. I even tried erasing it and flashing the original boot.img file I pulled out of the firmware file I got from ASUS' website, but it wouldn't work; it would boot up, show the ASUS logo, then shut off. Please, tell me there's a way through this, and btw the phone's bootloader was unlocked for sure; I used ASUS bootloader unlocker from the website. I have all firmware files already downloaded in case I need 'em.
UPDATE: I flashed a boot.img form an older firmware file from the same website and it kinda worked. It boots now and it seems to be stuck on the Zenfone logo now :/
Hey. I remember that you can boot into adb mode and then do
adb sideload "yourfirmware.zip"
The instruction holds true for earlier zenfones. See if it works here.
I have the same phone, but is dead, no recovery, no fastboot mode, no screen.
What can i do?. My pc just detect QDloader driver help plz.
Try this
msoliveras said:
What can i do?. My pc just detect QDloader driver help plz.
Click to expand...
Click to collapse
You need unbrick with: stock ROM
addrom.com/raw-rom-unbrick-for-asus-zenfone-live-l1-za550kl
QFIL program 1.0.0.2 versión
androidmtk.com/download-qualcomm-flash-image-loader-qfil
And valid version of QDloader driver
gsmusbdrivers.com/download/android-qualcomm-usb-driver
watch this video: youtube.com/watch?v=Ao5FB9mVZCU
Important if you zenfone live l1 is 2/3Gb Ram or is Go version 1Gb Ram to download correct stock ROM
Deceinard said:
Just a little disclaimer: I am an ABSOLUTE NOOB at this stuff and I just followed tutorials and guides; no experience whatsoever and I badly need your help
It all started when I wanted to root my phone. So I decided to install a custom recovery on the phone first(CWM to be exact). I flashed the recovery.img file and soft bricked my phone. I managed to fix it easily just by erasing recovery by using adb. Afterwards, recovery was accessible again. Since I couldn't do it that way, I tried downloading the phone's latest firmware from ASUS' website and pulled the boot.img out of it and patched it with Magisk. Flashed it and boom, bricked my phone. I tried fixing it the same way I did with the recovery.img but it didn't work. I even tried erasing it and flashing the original boot.img file I pulled out of the firmware file I got from ASUS' website, but it wouldn't work; it would boot up, show the ASUS logo, then shut off. Please, tell me there's a way through this, and btw the phone's bootloader was unlocked for sure; I used ASUS bootloader unlocker from the website. I have all firmware files already downloaded in case I need 'em.
UPDATE: I flashed a boot.img form an older firmware file from the same website and it kinda worked. It boots now and it seems to be stuck on the Zenfone logo now :/
Click to expand...
Click to collapse
I had the same problem and qfil didn’t worked. Try mi flash tool( try all versions, because not all work). It was able to flash my phone.(zenfone l1)