Hey guys. I noticed an issue with my Pocophone a month or two ago. I tried turning on the vibration feedback for touch only to find out it was turned on but not working. I immediately thought that the motor was gone so I entered CIT to test it. And it worked there like it should.
So, how can I get it working outside the CIT?
I am on the latest MIUI 9.5.9 Global Beta
Update on the situation now it works on incoming calls and also whatsapp notifications. No sign of it working on touch though :/
Related
[Device]
i9100g SG2 - i have seen posts all over so i know that this bug is not limited to my device.
with ICS firmware.
Tested on multiple [JB and ICS] CM9 & AOKP based roms.
[Problem]
I like CM9 and AOKP based roms over stock roms and roms derived from stock ones. I faced troubles when I used my phone for calling.
The screen goes completely blank both on inbound and outbound calls. This happens in more than 90% calls. There is no way to get screen back. You can set the phone to end call with power button otherwise you can not even end the call.
[Solution]
Last month (july 2012), after hitting my head against my phone for several hours i gave up hope and switched back to stock rom (only to be disappointed with slow & bulky stock rom)
Finally yesterday (21st Aug, 2012), I again decided to fight it out and find the problem.
While testing i found some abnormal call behavior, most of the times screen went black but some times the screen worked properly.
I decided to test my sensors... i installed androsensor [free] from play store. Magnetic sensor and proximity sensor had issues. The proximity sensor will work only once and it wrongly tells the phone that there is something close to the proximity sensor. This causes all the black screen problems during calls. It is default behavior of the phone to not listen to any touches or key pressed during the call if the phone is close to face. With proximity sensor misreporting, the phone assumes that the phone is close to face and it ignores all touches and key presses.
I then decided to force screen on while calls. I installed proximityscreenoff-lite [free] from the market. Under this app's settings I selected it to keep the screen turned on while calls.
To my surprise it somehow forced proximity sensor to work as it is actually intended.
Now, during calls the screen turns off when i bring phone close to face and again turns on when i move it away from the face.
[Magnetic sensor problem]
On some boots Magnetic sensor failed to start [it was not detected]. After a boot or two it worked. But its reading remain near constant even if you rotate the device. Well i hope to work something out for it some day as its not that important for me right now.
I hope this helps all and especially developers to find the culprit for the real problem. Till then this will fix your problems.
Got this problem too, app solved it!
Maybe some dev should look into it.
iam123 said:
[Device]
i9100g SG2 - i have seen posts all over so i know that this bug is not limited to my device.
with ICS firmware.
Tested on multiple [JB and ICS] CM9 & AOKP based roms.
[Problem]
I like CM9 and AOKP based roms over stock roms and roms derived from stock ones. I faced troubles when I used my phone for calling.
The screen goes completely blank both on inbound and outbound calls. This happens in more than 90% calls. There is no way to get screen back. You can set the phone to end call with power button otherwise you can not even end the call.
[Solution]
Last month (july 2012), after hitting my head against my phone for several hours i gave up hope and switched back to stock rom (only to be disappointed with slow & bulky stock rom)
Finally yesterday (21st Aug, 2012), I again decided to fight it out and find the problem.
While testing i found some abnormal call behavior, most of the times screen went black but some times the screen worked properly.
I decided to test my sensors... i installed androsensor [free] from play store. Magnetic sensor and proximity sensor had issues. The proximity sensor will work only once and it wrongly tells the phone that there is something close to the proximity sensor. This causes all the black screen problems during calls. It is default behavior of the phone to not listen to any touches or key pressed during the call if the phone is close to face. With proximity sensor misreporting, the phone assumes that the phone is close to face and it ignores all touches and key presses.
I then decided to force screen on while calls. I installed proximityscreenoff-lite [free] from the market. Under this app's settings I selected it to keep the screen turned on while calls.
To my surprise it somehow forced proximity sensor to work as it is actually intended.
Now, during calls the screen turns off when i bring phone close to face and again turns on when i move it away from the face.
[Magnetic sensor problem]
On some boots Magnetic sensor failed to start [it was not detected]. After a boot or two it worked. But its reading remain near constant even if you rotate the device. Well i hope to work something out for it some day as its not that important for me right now.
I hope this helps all and especially developers to find the culprit for the real problem. Till then this will fix your problems.
Click to expand...
Click to collapse
Just wanted to say that it's awesome that you tried to fix this as it drives me nuts. One question - does this still work with the latest version of the proximityscreenoff lite app? I've tried to find the right settings to do the above and I'm a bit confused - would you mind putting it in dummy language for me?
Cheers
Proximity sensor
Hello ,,
on my side with [ROM] KVT49L [AOSP] 【4.4.2】Dan&Ktoonsez 【CM Edition】 - Stables only! - May 31, 2014 , i have the same issue , thinking to switch from cm edition to normal ..
So I just ran the OTA update, and since then it seems my Proximity sensor has stopped working when in a call. This means that the screen is doing all kinds of things when I'm on a call, and I've even ended up putting the phone into flight mode mid-call. It worked perfectly before the latest update, but now seems to have ceased working.
I've gone into the service test menu, and there it seems to work, as soon as I cover the sensor it goes from Off to On, but during phone calls it isn't working at all.
Today when I dialed someone, the screen switched off, like when we bring it to our face, cover the sensor, tapping didnt do anything, only pressing power did bring back the screen, after that all was normal, except it wouldnt switch off the screen when the sensor was covered again
Did another call, the same, rebooted the phone but still the same. I use Dialer+, but tested with standard Phone app and the same happened, any suggestions
Yesterday all worked fine, the only apps updated yesterday where: Google, Calendar, MoboPlayer and Shazam
melorib said:
Today when I dialed someone, the screen switched off, like when we bring it to our face, cover the sensor, tapping didnt do anything, only pressing power did bring back the screen, after that all was normal, except it wouldnt switch off the screen when the sensor was covered again
Did another call, the same, rebooted the phone but still the same. I use Dialer+, but tested with standard Phone app and the same happened, any suggestions
Yesterday all worked fine, the only apps updated yesterday where: Google, Calendar, MoboPlayer and Shazam
Click to expand...
Click to collapse
Same happened calling with Whatsapp...
No one
The proximity sensor seems to work fine otherwise
I've had the same issue on seemingly random occasions. Lots of people suggested checking the proximity sensor data using AIDA64 but it all checked out fine.
Only thing that worked for me was to recalibrate the motion sensor under display settings. Hope that works for you!
gator716 said:
I've had the same issue on seemingly random occasions. Lots of people suggested checking the proximity sensor data using AIDA64 but it all checked out fine.
Only thing that worked for me was to recalibrate the motion sensor under display settings. Hope that works for you!
Click to expand...
Click to collapse
Thank you :good:
I ended up upgrading to MM and the problem is gone
melorib said:
Thank you :good:
I ended up upgrading to MM and the problem is gone
Click to expand...
Click to collapse
I had the same issue on Lollipop, I upgraded to marshmallow and it still exists. It happens at random times, sometimes the proximity sensor works fine but sometimes it kind of freezes and the screen remains off even after a phone call, I have to touch it a bit to make it respond.
Any permanent way of fixing this? Any solution would be very helpful.
masaichris said:
I had the same issue on Lollipop, I upgraded to marshmallow and it still exists. It happens at random times, sometimes the proximity sensor works fine but sometimes it kind of freezes and the screen remains off even after a phone call, I have to touch it a bit to make it respond.
Any permanent way of fixing this? Any solution would be very helpful.
Click to expand...
Click to collapse
Mine never had the problem other than that one day before I upgraded to MM, I have the phone since January. Did you try re-calibrating the sensor like Gator said
Same happened with MM, recalibrated the motion sensor under display settings, and it is working again...
Hi!
I recieved my Note 2 today. After unboxing, I turned it on, did the starting settings (google account, wifi, etc). After that the phone went to sleep, and that's where the problems started. From that time the touchscreen and touch buttons didn't work correctly. It's like someone is pressing the buttons continuously and because of that the touchscreen can't work, or at least not in every area of the sreen.
Did a factory reset, didn't work... It's all the same, even during the initial setup.
Videos of the issue:
Forum won't let me post is, but I can send it in a private mail I guess...
Anyone had an issue like this before? Is it a software related bug (there is some beta version miui installed), or is the device defected?
Any help would be appreciated!
Edit:
The phone was turned off for the night. I turned it on this morning and I could open up the lockscreen with swiping up from the touch buttons. After that the phone worked for like 3 minutes, and then stopped working again.
i have m2001j2g on MIUI 13.0.7 version stock rom, no root. Since i bought the phone 2 years ago i have been having problems with calls. When i put the phone on my ear, the screen goes off as expected but after a while it opens again and my face touches the screen. mostly closing my microphone, and doing other stuff as my face keep touching the unlocked screen. i tried locking my screen before a phone call and tried proximity sensor reset APK. none of them worked. i really like the specs but this problem annoys me. is there any solution?
ilampayen said:
i have m2001j2g on MIUI 13.0.7 version stock rom, no root. Since i bought the phone 2 years ago i have been having problems with calls. When i put the phone on my ear, the screen goes off as expected but after a while it opens again and my face touches the screen. mostly closing my microphone, and doing other stuff as my face keep touching the unlocked screen. i tried locking my screen before a phone call and tried proximity sensor reset APK. none of them worked. i really like the specs but this problem annoys me. is there any solution?
Click to expand...
Click to collapse
If it's not hardware problem
You can try calibration/re calibration
Goto my device>all specs>click on kernel version multiple times, it will open CIT menu
And find your desired option.
Just install "Call Proximity Sensor Fix" from playstore.
none of the recommendations worked. only proximity sensor fix app's proximity overrider works but it creates a constant notification. i use blockada for adblocking, it also has a constant notification. they keep changing places, it is annoying
edit: ok, i just unclicked show notifications for both app's, locked them on running applications, remove all restrictions: they are both working now without any notification. call proximity sensor fix it's overrider works dine, thanks all