I have a COOLPAD LEGACY GO 3310A or a COOLPAD ILLUMINIA,
RUNNING OREO 8.1, Im having an SD card issue, it says LEXAR CARD IS MISSING, All the time so pull it out an reinsert and it works but then an hour later it does it again, I'm on security patch Feb 1, 2019, also when I reboot it's there! It's formated as internal memory. any idea how to fix ???? Also is there a ROOT for this phone?? Msm8909 chip I think
SD help and ROOT
just woundering if anyone had any ideas? And any info on rooting this phone, it's ASSURANCE WIRELESS
morpheous1777 said:
just woundering if anyone had any ideas? And any info on rooting this phone, it's ASSURANCE WIRELESS
Click to expand...
Click to collapse
I have the Boost Mobile 3310a and it does not appear that the bootloader is supported for OEM unlocking via the typical methods (i.e. fastboot oem unlock, fastboot flashing unlock, etc.). If the bootloader would unlock, root would be as simple as flashing a patched boot image (systemless root). Has anybody had any luck on their bootloaders?
Related
After I tried unlocking my phone's bootloader (which I miserably failed in) I just decided to flash my phone back to its current android version. After that it keeps on having the error "insert sim and reboot phone" and my sd card can't be read also. I tried getting help from a legit technician but then even after all the restarting and whatnot it still didn't work.
Is there any hope for my phone?
mdmg13 said:
After I tried unlocking my phone's bootloader (which I miserably failed in) I just decided to flash my phone back to its current android version. After that it keeps on having the error "insert sim and reboot phone" and my sd card can't be read also. I tried getting help from a legit technician but then even after all the restarting and whatnot it still didn't work.
Is there any hope for my phone?
Click to expand...
Click to collapse
Ughh. Lots of people messing up Bootloaders now adays. Its a big trail-error process unlocking a bootloader. I do believe now you have no choice but to unlock your bootloader to fix your problem. These are the pages i saved on "How to" unlock your bootloader permanently. http://www.modaco.com/topic/346145-how-toguideunlock-x10-bootloader-permanently/ FALLOW THEM EXACTLY OR ELSE YOU WILL COMPLETELY REWEN YOUR PHONE. Be VERY CAREFULL. READ EVERYTHING FIVE TIMES
Just relock your bootloader and unlock it properly.
Sent from my X10 using xda app-developers app
The custom kernel links doesn't work anymore
So, I work somewhere in which phones need to be switched off for security reasons. Every time I leave, I switch mine back on. I noticed in the past few weeks that my Mate 10 would restart itself a few times after I turn it on after work. After a while, it sorts itself out and stops rebooting, with everything returning to normal. A few days ago, it didn't start up properly and took me to Huawei eRecovery. I'd never seen that before. I tried rebooting, but it would keep coming back to eRecovery. I also did a factory reset and cleared the cache and it looked like it was fixed because I saw a white EMUI screen asking me to set the language and all that stuff. However, the screen would soon become unresponsive and the Mate 10 reboot would itself and go back to eRecovery. I tried this a few more times until I thought I got lucky and managed to finish the whole setup process where I see the phone's home screen with the apps. However, when I tried to add my gmail account, the phone once again reset itself back into eRecovery. So I decided to choose the 'Download the latest version and recovery' option. I left that for a while and when I came back I saw that the phone was still in eRecovery. I rebooted a few times and even tried downloading the latest version again, but now it says, 'Getting package info failed'.
The phone was purchased in China. It says on the back, 'ALP-AL00'. I never attempted to rebrand, root or anything like that. All I've ever done is change the system and input language in settings, download the Google Play Store from App Gallery and updated to EMUI 9. I'm really at a loss as to what to do now. There aren't any service centres in my city or state. It's also kind of concerning that other people have posted similar issues and with no responses so far.
Bump
Bump again.
s3rialthrill3r said:
Bump again.
Click to expand...
Click to collapse
Tried to boot into recovery (not eRecovery) and do a factory reset from there?
Pretoriano80 said:
Tried to boot into recovery (not eRecovery) and do a factory reset from there?
Click to expand...
Click to collapse
How do I boot into the non-eRecovery recovery (sounds confusing already)?
s3rialthrill3r said:
How do I boot into the non-eRecovery recovery (sounds confusing already)?
Click to expand...
Click to collapse
shutdown phone remove usb cable from it power button + volume up for 5 seconds then release buttons
hamadazh said:
shutdown phone remove usb cable from it power button + volume up for 5 seconds then release buttons
Click to expand...
Click to collapse
I did that, but it still goes to eRecovery.
Try download mode..if it works, with sdcard and dload folder you can flash your last firmware...
manager77 said:
Try download mode..if it works, with sdcard and dload folder you can flash your last firmware...
Click to expand...
Click to collapse
Are you talking about the 'Download the latest version and recovery' option? I always get a ''Getting package info failed' message. Are you saying that I need to put something on an SD card and then choose that option? Where do I get the firmware and which one is the right one?
Bump
I continue searching the solution.
I have 1,5 yers with the same problem.
No I have solution yet.
Tryed Install manny Firmwares with SD card, Format under eRecovery and HiSute.
I already opened it and change the thermal paste.
Tested internal components...
Unfortunely my Huawei Mate 10 is a ALP-AL00 with a special hardware version (6Gb RAM + 128GB ROM), the International version have only 4Gb RAM.
If the Huawei return bootloader unlock i can try instal a custom rom, but without this code my best smartphone was turned into a paperweights.
I have no idea how to unlock his bootloader (The phone have Android 9.0)
I continue searching the solution.
leo.hyde said:
I have 1,5 yers with the same problem.
No I have solution yet.
Tryed Install manny Firmwares with SD card, Format under eRecovery and HiSute.
I already opened it and change the thermal paste.
Tested internal components...
Unfortunely my Huawei Mate 10 is a ALP-AL00 with a special hardware version (6Gb RAM + 128GB ROM), the International version have only 4Gb RAM.
If the Huawei return bootloader unlock i can try instal a custom rom, but without this code my best smartphone was turned into a paperweights.
I have no idea how to unlock his bootloader (The phone have Android 9.0)
I continue searching the solution.
Click to expand...
Click to collapse
Use testpoint (device back needs to be opened again), flash bootloader using DC Phoenix. Then flash board firmware. In board firmware you can use HCU to get an unlock code. You will need to repair device info using HCU after flashing board, as it will wipe it by default.
Here's a guide for fixing device when on board:
1)Flash oeminfo (own backup) from fastboot, or dump oeminfo using dd in adb shell and flash that one back using fastboot.
2)Backup modemnvm_system, modemnvm_factory and modemnvm_backup using adb pull from a command prompt (/dev/block/bootdevice/by-name/modemnvm_system and so on)
3)Flash backed up modemnvm_system, modemnvm_factory and modemnvm_backup from fastboot
3)Modify and brand with HCU (check everything but those that erase/flash empty board) (remember to fill vendor and cust)
4)Direct Unlock Network with HCU (device will find no network if not done)
5)Read Bootloader code if you ever used HCU to get code before
6)Download and flash Oreo service firmware from androidhost.ru using a OTG cable and a memory stick to flash it
After this your device should work fine and you will have an unlock code.
Please note that HCU doesn't work on firmware after May 2018, so don't replace Oeminfo after this as that will remove the unlock code generated by HCU.
leo.hyde said:
I have 1,5 yers with the same problem.
No I have solution yet.
Tryed Install manny Firmwares with SD card, Format under eRecovery and HiSute.
I already opened it and change the thermal paste.
Tested internal components...
Unfortunely my Huawei Mate 10 is a ALP-AL00 with a special hardware version (6Gb RAM + 128GB ROM), the International version have only 4Gb RAM.
If the Huawei return bootloader unlock i can try instal a custom rom, but without this code my best smartphone was turned into a paperweights.
I have no idea how to unlock his bootloader (The phone have Android 9.0)
I continue searching the solution.
Click to expand...
Click to collapse
Maybe it's because...
...
...
...
...there is no solution.
It turns out that my phone was defective. A very good friend of mine happened to be making a trip to Shenzhen anyway, so they offered to take the phone with them to sort it all out. It was taken back to the manufacturer. The motherboard was defective. Since it was within warranty, I got a free replacement.
hi i searched the site and scoured the web.
I am having trouble rooting/installing custom recovery on my Coolpad Splatter device cp3636a 2gb ram 16gb storage.
Every one click method has failed (numerous reattempts included)
Flashing to a custom recovery i would say failed because i cannot find the device on the TWRP site for the img etc.
its android 7.0 nougat Android security patch level october 1, 2017.
If anyone could help or provide some help/guide that works, would be greatly appreciated.
its a GSM unlocked phone.(i use the cheap reloadable sim card kits etc so carrier changes sometimes.)
Hi, all. Please help me with some issues. Have Sonim XP5s dualsim gsm phone ATT locked.
1 Bootloader. Trying to unlock it.
*#*#2387#*#* activated USB debug. Set OEM unlock, but bootloader locked. fastboot unlock, fastboot oem unlock, fastboot flashing unlock do nothing. How i can unlock it?
2 Firmware. Does anyone have image to flash with QFIL? I try to flash empty one but QFIL say timeout and take no action. EDL started but ignore all requests. Bootloader issue?
3 SIM2 activation. Phone disable second SIM at all. Need correct firmware?
4 ATT unlock. How i can do it, with correct firmware installed?
5 Root. Kingroot, kingoroot no success. Custom recovery not found. Flashing\booting custom recovery is locked.
Thanks.
bumpity-bump
I have the same phone that I just bought and (sheepishly) just found out has wi-fi calling disabled by AT&T. That was a main reason for getting it, but unfortunately I went by the Sonim website's info and not AT&T's regarding that feature. Verizon's version has it enabled, but it's also much scarcer on the secondary market. The XP5800 doesn't seem to be a popular phone for tinkering judging by the lack of info on doing so.
Does anyone know if wi-fi calling could hypothetically be activated by rooting and then toggling some values, or is it more likely that the involved code was omitted entirely? I saw something to the former about tethering.
Bit_Basher said:
be activated by rooting and then
Click to expand...
Click to collapse
Still have found no rooting way. Bootloader locked, so no custom recovery can be used. Very unpopular phone, as you see, thread dead.
SpectralUA said:
Still have found no rooting way. Bootloader locked, so no custom recovery can be used. Very unpopular phone, as you see, thread dead.
Click to expand...
Click to collapse
Each Android can get rooted by means of SuperSU ZIP. Only requirement is to have successfully USB debugging option enabled in Android->Settings->Developer options. You install this ZIP via phone's stock recovery.
To access developer mode, google "developer mode sonim xp5s". Open article: kb.eschat.com "Open Developer Options Tab on Sonim XP5, XP5s or XP3...". The device will then open the Developer Options tab. Ensure the take bug report option is enabled, and that USB debugging is also enabled. You may also add a menu button to the Power tab for future access to this feature.
Be sure you use a clean SuperSU ZIP to avoid malware. Suggest getting one from the xda forum.
Hi. Is there any success with rooting or enabling second sim to working 2 sims together?
jwoegerbauer said:
Each Android can get rooted by means of SuperSU ZIP. Only requirement is to have successfully USB debugging option enabled in Android->Settings->Developer options. You install this ZIP via phone's stock recovery.
Click to expand...
Click to collapse
How i can do it? Stock recovery have no menu. /cache access denided from user. Putting update.zip do nothing without /cache/recovery/command. Did you know some trick to proceed install? ADB debugging enable, but no root rights there.
haikkk said:
Hi. Is there any success with rooting or enabling second sim to working 2 sims together?
Click to expand...
Click to collapse
Nothing.
Here are the firmware images for the Sprint XP5s
5SA.0.4-05-8.1.0-29.33.00_USER_PST.zip
Root has been achieved with Magisk!
ytagger said:
Root has been achieved with Magisk!
Click to expand...
Click to collapse
Is there any way to get Android Auto to work on the XP5s?
Hello All.
sorry for off topic, but can’t find anywhere.
does anybody know how to remove PIN on Sonim XP5s? Can’t access phone without entering PIN.
I would really appreciate for any help.
Thank you.
bkarshibaev said:
how to remove PIN on Sonim XP5s?
Click to expand...
Click to collapse
Recovery mode. Power + volUp long to show menu. Factory reset.
SpectralUA said:
Recovery mode. Power + volUp long to show menu. Factory reset.
Click to expand...
Click to collapse
Hello SpectralUA,
Does it really remove PIN?
I’m planning on buying Sonim XP5s and send it overseas. I just want to be 100% sure that Recovery mode will remove PIN.
Thank you.
bkarshibaev said:
Hello SpectralUA,
Does it really remove PIN?
I’m planning on buying Sonim XP5s and send it overseas. I just want to be 100% sure that Recovery mode will remove PIN.
Thank you.
Click to expand...
Click to collapse
Yes, it does, except if Factory Reset is blocked by Scout
ytagger said:
Yes, it does, except if Factory Reset is blocked by Scout
Click to expand...
Click to collapse
Is there way to check if Scout has restriction?
also, do you know which XP5s (AT&T, SouthernLinc, Sprint or Verizon) has wifi calling enabled and 2nd sim card slot is unlocked? I mean unlocked version of those 3 carriers.
Thank you.
bkarshibaev said:
Is there way to check if Scout has restriction?
Click to expand...
Click to collapse
Not if the device is PIN locked and you don't know it, obviously .
If it's open, just try to reset the phone from the regular menu and you'll see if it's restricted
bkarshibaev said:
2nd sim card slot is unlocked?
Click to expand...
Click to collapse
2nd sim usable without 1st. Found no way to enable both at same time.
Maybe anyone know how to dualsim (standby mode, etc) this unit?
ytagger said:
Here are the firmware images for the Sprint XP5s
5SA.0.4-05-8.1.0-29.33.00_USER_PST.zip
Click to expand...
Click to collapse
The link is not working. Do you have a different one?
I bought a second hand Redmi 5 Plus (vince) phone and although it reads sim cards, it does not connect to any mobile network
I am conversant with fastboot and adb command line commands.
Ideally I would like to unlock the bootloader to flash custom roms, but if that is not possible to root the phone
Any ideas?
casacristo said:
I bought a second hand Redmi 5 Plus (vince) phone and although it reads sim cards, it does not connect to any mobile network
I am conversant with fastboot and adb command line commands.
Ideally I would like to unlock the bootloader to flash custom roms, but if that is not possible to root the phone
Any ideas?
Click to expand...
Click to collapse
Use MI Unlock tool (official) to unlock bootloader. Search on MI FORUM for help and more info.
You can also find links on XDA forum (use search).
Good luck and stay safe.
yes, but that requires you pop a sim card in with data connection on and as this phone has the antena broken it can't connect to any mobile network (only to wifi)