Removed at OP request.
Removed at OP Request
One of the best custom....?
We already have the thread for Aosip Pizza(Unofficial) one..
Sent from my Redmi Note 5 Pro using Tapatalk
I need treble recovery to instal?
Enviado desde mi XT1800 mediante Tapatalk
nicocarrillo said:
I need treble recovery to instal?
Enviado desde mi XT1800 mediante Tapatalk
Click to expand...
Click to collapse
Yes.
ronaxdevil said:
One of the best custom....
Click to expand...
Click to collapse
what is the screen on time you get on this rom
also performance review
and is it okay as a daily driver?
Waiting screenshot ui interface
Kamoes27 said:
Waiting screenshot ui interface
Click to expand...
Click to collapse
Screenshots present in the screenshots section.
nstark13 said:
what is the screen on time you get on this rom
also performance review
and is it okay as a daily driver?
Click to expand...
Click to collapse
SoT I got - 7 hrs with LTE all time
Just try it out and i bet you'll not disappoint.
marshmello_61 said:
SoT I got - 7 hrs with LTE all time
Just try it out and i bet you'll not disappoint.
Click to expand...
Click to collapse
okay so i tried booting it, but it actually failed
at the boot startup it shows a message saying 'you device has an internal problem, try contacting your manufacturer.'
after that the same password issue and let me tell you i know how to boot roms to surpass this lock startup issue but it actually failed.
Also i tried installing this first by installing stock rom with nos password but it actually fails
i actually want to give it a try since it has such a good sot so please fix this bug, how to bypass this
nstark13 said:
okay so i tried booting it, but it actually failed
at the boot startup it shows a message saying 'you device has an internal problem, try contacting your manufacturer.'
after that the same password issue and let me tell you i know how to boot roms to surpass this lock startup issue but it actually failed.
Also i tried installing this first by installing stock rom with nos password but it actually fails
i actually want to give it a try since it has such a good sot so please fix this bug, how to bypass this
Click to expand...
Click to collapse
The message showed at bootup is normal, just ignore it.
And the password issue you talking about, I guess your device is encrypted, try decrypting it.
marshmello_61 said:
The message showed at bootup is normal, just ignore it.
And the password issue you talking about, I guess your device is encrypted, try decrypting it.
Click to expand...
Click to collapse
okay i'll try right away
i tried from a decrypted rom still it was showing the password issue, i'll check once again
Edit 1: tried it again still no fix, same problem occurs
Related
Android N check
Working Root check
Working Twrp check
Dark theme check
I'm good to go :good:
How are your battery/performance experiences after time with N?
ripv2 said:
How are your battery/performance experiences after time with N?
Click to expand...
Click to collapse
not to bad about 4/5 sot
Okay, has things settled in? Does the device still get hot from basic use?
jaythenut said:
not to bad about 4/5 sot
Click to expand...
Click to collapse
ripv2 said:
Okay, has things settled in? Does the device still get hot from basic use?
Click to expand...
Click to collapse
what do you mean "still"? It shouldn't be doing that regardless.
ripv2 said:
Okay, has things settled in? Does the device still get hot from basic use?
Click to expand...
Click to collapse
no not got hot at all :good:
Upon flashing the N beta, after downloading and setting apps up the device can get hot. Several people have reported this. The kernel needs time to settle in.
siren_shadows said:
what do you mean "still"? It shouldn't be doing that regardless.
Click to expand...
Click to collapse
ripv2 said:
Upon flashing the N beta, after downloading and setting apps up the device can get hot. Several people have reported this. The kernel needs time to settle in.
Click to expand...
Click to collapse
Thought you meant stock was having issues. Yeah i could see that being a problem. It's not really daily driver ready
I noticed a lot of lag while typing, but I didn't let the kernel settle in for more than a few hours. Does this eventually go away?
Which root are you using? I tried phh and there is no system write so adaway wasn't working for me...
http://forum.xda-developers.com/showthread.php?t=3333423
Use this...it gave me full root
swapavi said:
Which root are you using? I tried phh and there is no system write so adaway wasn't working for me...
Click to expand...
Click to collapse
http://forum.xda-developers.com/apps/supersu/unofficial-supersu-v2-68-android-n-t3333423 this one
havanahjoe said:
I noticed a lot of lag while typing, but I didn't let the kernel settle in for more than a few hours. Does this eventually go away?
Click to expand...
Click to collapse
got a bit better but not great
Have you looked at the buildprop file to see what edits are possible in N?
ripv2 said:
Have you looked at the buildprop file to see what edits are possible in N?
Click to expand...
Click to collapse
no not that brave lol
jaythenut said:
got a bit better but not great
Click to expand...
Click to collapse
Ah, that sucks. If there's one thing that I really can't take, is lag, especially while typing. I'll just lust after N features while sticking to 6.0.1 for now.
Recovery hangs at decrypting for me (test build 1) but flashing boot image in fastboot got me root so I'm happy.
Sent from my Nexus 6P using Tapatalk
ecrvnr said:
Did you just get twrp 3.0.0-1 and The SuperSU beta 2.68? I want to root but I don't dare flashing those cause I don't want to **** things up and have to start over.
Click to expand...
Click to collapse
http://rootjunkysdl.com/files/?dir=Nexus 6P Angler/Android N Preview flashed the 2nd link what will wipe phone then fastboot flash recovery twrp.img.img then flashed 2.68 in twrp
i flashed the new 3.0.0-1 twrp and the recovery just freezes at logo :/
Wonder if you can change the SELinux mode back to enforced after you root?
Hi all,
Today I'm posting a good ROM for our Pro 3. This time is the MIUI 8.1 ported and modified by tora33. This one has no Chinese apps, Gapps, viper4android and few more....
All credit to tora33 from leEco.re
Download
https://mega.nz/#!2hpj2ayI!uvELzsuLTngvBajsFc3L53fOQ4ED1dACCFO7AnBlqVs
How to install:
Backup your current ROM
Reboot into TWRP
Delete factory reset
Install
All done
This Rom comes rooted no need to root.
If you are using x727 you have to change in build.prop
persist.radio.multisim.config=dsds
To
persist.radio.multisim.config=NA
If not signal won't lock and going to give you an error.
The first boot it's going to take like 8 min. Be patient
Link to his page:
http://www.leeco.re/topic/2134-tora33le-pro-3-multi_miui_pro3_7223_base_20s_tora33/
Bugs:
Nothing so far you let me know.
Can you tell me if theming (wallpaper, sound, theme,...) is working on this version please ?
Thank you in advance.
Previuos version have big bug with alarm and clock. You can set the alarm but the thallium and not call because the phone have deep sleep
Has notifications problems like all other previous Miui releases?
Inviato dal mio LEX727 utilizzando Tapatalk
bayad said:
Can you tell me if theming (wallpaper, sound, theme,...) is working on this version please ?
Thank you in advance.
Click to expand...
Click to collapse
Yes themes are working! I just download this theme and it changed everything successfully.
kixx22 said:
Previuos version have big bug with alarm and clock. You can set the alarm but the thallium and not call because the phone have deep sleep
Click to expand...
Click to collapse
Can you tell me more about it, I just check alarm and received a call and is working.
andy88de said:
Has notifications problems like all other previous Miui releases?
Inviato dal mio LEX727 utilizzando Tapatalk
Click to expand...
Click to collapse
I cant test that part because i only have gmail. Gmail is giving me real time updates.
Abdiel1224 said:
Can you tell me more about it, I just check alarm and received a call and is working.
Click to expand...
Click to collapse
If I setting the alarm evening, unfortunately this does not work in the morning and after waking the phone turns out that the clock simply is lateness
kixx22 said:
If I setting the alarm evening, unfortunately this does not work in the morning and after waking the phone turns out that the clock simply is lateness
Click to expand...
Click to collapse
Ok i have to try it.
hi, i can't get passed the MIUI account sign-in. i already have an account but it kept saying that i have an invalid device ID. other roms like Turbo GT-X is fine.
Seanichigo said:
hi, i can't get passed the MIUI account sign-in. i already have an account but it kept saying that i have an invalid device ID. other roms like Turbo GT-X is fine.
Click to expand...
Click to collapse
Thats because you have x727 version. Try to change this in build.prop
persist.radio.multisim.config=dsds
To
persist.radio.multisim.config=NA
And it will works fine.
Seanichigo said:
hi, i can't get passed the MIUI account sign-in. i already have an account but it kept saying that i have an invalid device ID. other roms like Turbo GT-X is fine.
Click to expand...
Click to collapse
Havent flashed any miui rom yet but you can try these steps from OP link:
1)http://www.leeco.re/topic/2134-tora...base_20s_tora33/?do=findComment&comment=28335
2) for mi cloud error:
start your device in english and then change language
u can edit where? in trwp ?
it's more the fact that I'm stuck at getting device security info even though I input the correct wifi and I can't continue the initial setup
Seanichigo said:
u can edit where? in trwp ?
it's more the fact that I'm stuck at getting device security info even though I input the correct wifi and I can't continue the initial setup
Click to expand...
Click to collapse
If you just let it keep popping up and wait for it to time out a few times, it will eventually let you skip past it. I also got it to work once by not signing in to wifi and skipping the setup.
I Finally got passed the miui account screen by not inserting the SIM card. Everything seems working fine. Thanks for all the help.
Having trouble getting contacts to sync properly , any thoughts....
我来自中国，我使用过它，但它是单卡的，它比国内的miui更纯净，然而它只支持单卡，这很遗憾
Some people just don't realize this forum is in English...
l727195473 said:
He is just saying that he is from China and this rom only has one sim card support which is regrettable
Click to expand...
Click to collapse
Yep but if he can read english he would at least put it in google translator to post it in english anyway..
How many SOT are you getting in this rom??
I face this weird bug in newer Oreo ROMs where sometimes after rebooting the phone and when I enter my password on the lockscreen, the screen goes black and returns to the lockscreen. I faced this on latest Nos,ABC,arrow ROM, mokee ROM etc. If I want to enter into the phone then I have to remove the password from recovery. Anyone facing this issue
I faced it too on dotos
,
smatm said:
I faced it too on dotos
Click to expand...
Click to collapse
Did u face it any other roms, also which recovery
tom jp said:
,
Did u face it any other roms, also which recovery
Click to expand...
Click to collapse
no, I was on gsi rom for a while,then came back to dotos kenzo , faced that bug
recovery is twrp by atg-droid
smatm said:
no, I was on gsi rom for a while,then came back to dotos kenzo , faced that bug
recovery is twrp by atg-droid
Click to expand...
Click to collapse
Ok
tom jp said:
Ok
Click to expand...
Click to collapse
what happens after flashing lockscreen fixer ?
can I readd password ?
tom jp said:
I face this weird bug in newer Oreo ROMs where sometimes after rebooting the phone and when I enter my password on the lockscreen, the screen goes black and returns to the lockscreen. I faced this on latest Nos,ABC,arrow ROM, mokee ROM etc. If I want to enter into the phone then I have to remove the password from recovery. Anyone facing this issue
Click to expand...
Click to collapse
kindly refer to this thread its permanent solution is https://forum.xda-developers.com/re...x-wierd-lockscreen-bug-treble-treble-t3827445
Ishaan Kaushal said:
kindly refer to this thread its permanent solution is https://forum.xda-developers.com/re...x-wierd-lockscreen-bug-treble-treble-t3827445
Click to expand...
Click to collapse
Any easier fix, thanks for the help
tom jp said:
Any easier fix, thanks for the help
Click to expand...
Click to collapse
if there would be an easier fix then why have written this tough fix?
only way to fix this issue is too follow full procedure
if u dont believe on it whether try yourself because 3 friends tried and they also solved it by this method
It was probably magisk issue
nathanchance said:
also @D-m-x (and everyone else), please try this Magisk build (it can be installed in the modules tab in Magisk Manager)
https://transfer.sh/YVFdi/Magisk-v16.7-1674-.zip
It includes a commit that should fix all of the weird issues with Magisk like the PIN not being accepted after a reboot or the phone getting stuck at the Google logo with the progress bar. The root cause is services crashing during the boot chain and either causing deadlock or lack of functionality. It's entirely possible that a service crashed during boot and started causing issues.
Click to expand...
Click to collapse
Please refer to this post, thanks to @nathanchance
Dims_Camper said:
Please refer to this post, thanks to @nathanchance
Click to expand...
Click to collapse
can you re upload it ?
smatm said:
can you re upload it ?
Click to expand...
Click to collapse
Always first flash twrp official in fastboot when u come from miui. Dont flash any other recovery.
And format data using only with twrp official. Other twrp have problems decrypting miui encrypted data.
Coz It throw error when u use format data command to decrypt miui using redwolf and fox recovery.
And if u used treble twrp and cardinal treble and any other treble rom then wipe cust, vendor before u flash non treble rom.
smatm said:
can you re upload it ?
Click to expand...
Click to collapse
Latest magisk merged it already, that old magisk is no longer usable
Ishaan Kaushal said:
if there would be an easier fix then why have written this tough fix?
only way to fix this issue is too follow full procedure
if u dont believe on it whether try yourself because 3 friends tried and they also solved it by this method
Click to expand...
Click to collapse
Well, he might have written the tough fix because maybe he doesn't know about the easier fix. God, stop being arrogant.
Instagram : rishabh.rajbhar
Text me i will guide you
I installed pixel experience (not caf) rom today on my poco F1 and the look and feel is great..but when I'm using it the touch isnt working sometimes it stucks. Only fix is to lock and unlock phone again ..then after couple minutes the issue will appear again need help
I have the same issue
If anyone knows how to fix this please help me!! Much appreciated
What version of the vendor did you flash?
It needs to be higher than 9.2.15
riseofsand said:
What version of the vendor did you flash?
It needs to be higher than 9.2.15
Click to expand...
Click to collapse
beryllium-9.4.1-9.0
I am using pixel experience CAF version and vendor 9.4.1... there is no touch issues .. try CAF version and clean flash it
This happens for me too whenever I have TWRP recovery installed, with any ROM (both stock *and* custom ones). I only get this behaviour when entering my SIM cards PIN code or when booting TWRP (I can't swipe so I must turn the screen off, wait for about 5 seconds, then turn it in again)
On PE aosp u can flash miui kernel and fix it! Idk about caf.
What touch panel do you have? check out my thread https://forum.xda-developers.com/poco-f1/help/damn-screen-freezes-t3912069
vamshikailasa said:
I am using pixel experience CAF version and vendor 9.4.1... there is no touch issues .. try CAF version and clean flash it
Click to expand...
Click to collapse
Did u use aosp version? What is the most stable ? Most battery efficient? More smooth? Can u tell me answers for each questions? Thanks alot
Mooatreides said:
On PE aosp u can flash miui kernel and fix it! Idk about caf.
What touch panel do you have? check out my thread https://forum.xda-developers.com/poco-f1/help/damn-screen-freezes-t3912069
Click to expand...
Click to collapse
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
Is it correct?
u wont face any touch issues if u use 9.3.28 kernel, only stock kernel has no issues with touch, idk if pe will boot with it or not... try it yourself, bt i am sure that 9.3.28 has the best touch drivers.
gigishan said:
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
Is it correct?
Click to expand...
Click to collapse
Well try man and see, go for aosp
U can just take the boot.img from miui also only. On PE
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
gigishan said:
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
Click to expand...
Click to collapse
MAZAL TOV man! enjoy the good life with no freezes lol. Its like having a tooth hurt forever and you forgot what normal was, then all of a sudden no freezing screen pain hahah!
Mooatreides said:
MAZAL TOV man! enjoy the good life with no freezes lol. Its like having a tooth hurt forever and you forgot what normal was, then all of a sudden no freezing screen pain hahah!
Click to expand...
Click to collapse
Hahaha yeah man thank u so much for the help
gigishan said:
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
Click to expand...
Click to collapse
I already have PE aosp installed with 9.5.8-9.0 vendor-firmware on my Poco F1. Is it alright to flash just the MIUI kernel (kernel-beryllium_global_9.4.8-ak2.zip) and nothing else?
Or do I need to repeat the whole flashing firmware / installing PE OS thing?
Mariorio said:
I already have PE aosp installed with 9.5.8-9.0 vendor-firmware on my Poco F1. Is it alright to flash just the MIUI kernel (kernel-beryllium_global_9.4.8-ak2.zip) and nothing else?
Or do I need to repeat the whole flashing firmware / installing PE OS thing?
Click to expand...
Click to collapse
Just flash the kernal alone you will be fine
Will just leave it here. Hope someone finds it useful.
I fixed the screen freeze issue using the vendor-firmware and kernel fix on the links below:
Files:
beryllium-9.4.12-9.0-vendor-firmware.zip
kernel-beryllium_global_9.4.12-ak2.zip
Links here.
Also, I am on Lineage OS, latest build.
Thank you for this thread!
gigishan said:
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
Click to expand...
Click to collapse
Same problem here since couple of weeks. Flashed these using lastest build of Nitrogen OS and everything is working fine so far! Thank you
Mooatreides said:
MAZAL TOV man! enjoy the good life with no freezes lol. Its like having a tooth hurt forever and you forgot what normal was, then all of a sudden no freezing screen pain hahah!
Click to expand...
Click to collapse
Edu Lezcano said:
Same problem here since couple of weeks. Flashed these using lastest build of Nitrogen OS and everything is working fine so far! Thank you
Click to expand...
Click to collapse
Will these vendor and kernel combo work for the latest Pixel Experience update(05082019)?
Hi guys
I've tried many twrp images and roms and for me this twrp:
https://drive.google.com/open?id=11Gs7t1xMT8kiDukjIM1D3q4EyX2Tdarp
is perfect.
I'm on revolution os with my xiaomi mi 9 transparent edition 8GB 256GB. It's rooted with encryption working. Google certified.
Battery over night with discharge of only 3%
See pictures in the link above.
With this recovery I've got also tested full backup and full restore and it's working (With 4 digits pin and activated fingerprints)!
Which recovery you're using?
and please tell here your experiences.....
Might wanna move this to questions & answers subforum
robotzki said:
Might wanna move this to questions & answers subforum
Click to expand...
Click to collapse
Yes you are right but I don't know how
I Just can't understand what bearing a custom recovery has on battery life
Enviado de meu MI 9 usando o Tapatalk
Laptapper said:
Hi guys
I've tried many twrp images and roms and for me this twrp:
https://drive.google.com/open?id=11Gs7t1xMT8kiDukjIM1D3q4EyX2Tdarp
is perfect.
I'm on revolution os with my xiaomi mi 9 transparent edition 8GB 256GB. It's rooted with encryption working. Google certified.
Battery over night with discharge of only 3%
See pictures in the link above.
With this recovery I've got also tested full backup and full restore and it's working (With 4 digits pin and activated fingerprints)!
Which recovery you're using?
and please tell here your experiences.....
Click to expand...
Click to collapse
What's the process to flash revolution os and have encryption working? Thanks!
B3rm3J0 said:
What's the process to flash revolution os and have encryption working? Thanks!
Click to expand...
Click to collapse
Have a look in revolution os thread.
I've installed the recommended twrp and ros after revolution os is running, I've flashed the twrp fom post1, formated data and complete internal sd. Installed magisk Then booting and set security pin and fingerprint. Rebooted to new twrp and password is your 4 digits pin......
luizsaluti said:
I Just can't understand what bearing a custom recovery has on battery life
Enviado de meu MI 9 usando o Tapatalk
Click to expand...
Click to collapse
The combination of twrp and revolution os is working fine, before I've had other twrps which gave problems to install ros and/or problems with decrypt.
May be other combinations are also working....
Battery consumption is only as an info for those who wanna have a good standby and everyone can decide to flash like me or not.
Laptapper said:
The combination of twrp and revolution os is working fine, before I've had other twrps which gave problems to install ros and/or problems with decrypt.
May be other combinations are also working....
Battery consumption is only as an info for those who wanna have a good standby and everyone can decide to flash like me or not.
Click to expand...
Click to collapse
With PE you might get much better standby drain. I don't wanna go back anymore.
Kollachi said:
With PE you might get much better standby drain. I don't wanna go back anymore.
Click to expand...
Click to collapse
Much better than 3% over night? I can't believe....
Laptapper said:
Much better than 3% over night? I can't believe....
Click to expand...
Click to collapse
Lol. I was an all Miui roms and with PE I got the best SOT and standby.
Kollachi said:
Lol. I was an all Miui roms and with PE I got the best SOT and standby.
Click to expand...
Click to collapse
Then please tell in details what you've done exactly
Laptapper said:
Have a look in revolution os thread.
I've installed the recommended twrp and ros after revolution os is running, I've flashed the twrp fom post1, formated data and complete internal sd. Installed magisk Then booting and set security pin and fingerprint. Rebooted to new twrp and password is your 4 digits pin......
Click to expand...
Click to collapse
What if i got an unlock pattern?
B3rm3J0 said:
What if i got an unlock pattern?
Click to expand...
Click to collapse
I don't know exactly, I've heard this could be a problem.
NickXiaomi said:
Have anyone the extreme kernel v2.1 for mi9 please? Help me
Click to expand...
Click to collapse
You're searching this? But you're in a wrong thread...
https://forum.xda-developers.com/Mi-9/development/kernel-extremekernel-v0-1-mi-9-t3906136
Laptapper said:
You're searching this? But you're in a wrong thread...
https://forum.xda-developers.com/Mi-9/development/kernel-extremekernel-v0-1-mi-9-t3906136
Click to expand...
Click to collapse
The thread closed and the extreme kernel page isn't working...
Hello friends. I have a problem when I unlock my xiaomi mi 9 I install the twrp 3.3.0 that says on the page xiaomi.eu and I liked the rom and wanting to update to 9.6.13 I try to enter the twrp and I can not enter the screen of the twrp appears in black and it restarts in the ROM that I currently have. xiaomi.eu 9.6.5 What can I do?
Kollachi said:
Lol. I was an all Miui roms and with PE I got the best SOT and standby.
Click to expand...
Click to collapse
Please let us know what you've optimized in your phone to get much better discharging rate as 3% at night
Remember we're here to share important informations and not to say I'm the best.....
rubencho21 said:
Hello friends. I have a problem when I unlock my xiaomi mi 9 I install the twrp 3.3.0 that says on the page xiaomi.eu and I liked the rom and wanting to update to 9.6.13 I try to enter the twrp and I can not enter the screen of the twrp appears in black and it restarts in the ROM that I currently have. xiaomi.eu 9.6.5 What can I do?
Click to expand...
Click to collapse
Try to take the twrp of my post1 and please share your experiences.
Laptapper said:
Try to take the twrp of my post1 and please share your experiences.
Click to expand...
Click to collapse
Sry I'm beta tester and the builds are bad right now with battery drain. Forgot what I said. Maybe in future Akash will fix that
Yesterday I bricked my Cepheus when I'm trying almost all variants of TWRP, got corrupted vbmeta.
And this TWRP saved my Cepheus, thank you!