Related
Greeting All,
I just bought a "Refurbished" LG V30+ from fleabay and I'm having some issues... It will not update to Oreo.
Below are details:
The phone is factory reset
It has Android 7.1.2
When I try to update it says it is the latest version
The software version is US99810d
The hardware is LG-US998
(I'm on T-mobile)
I tried to use LG Bridge and it does connect (I did a back-up)
HOWEVER, when I click on Software Update I get "Cannot check the software version. Try again"
If I click on "Update error recovery" I get "Your phone information cannot be checked. Contact LG..."
Any ideas??? OR should I send it back???
THANKS
mm_hockey said:
Greeting All,
I just bought a "Refurbished" LG V30+ from fleabay and I'm having some issues... It will not update to Oreo.
Below are details:
The phone is factory reset
It has Android 7.1.2
When I try to update it says it is the latest version
The software version is US99810d
The hardware is LG-US998
(I'm on T-mobile)
I tried to use LG Bridge and it does connect (I did a back-up)
HOWEVER, when I click on Software Update I get "Cannot check the software version. Try again"
If I click on "Update error recovery" I get "Your phone information cannot be checked. Contact LG..."
Any ideas??? OR should I send it back???
THANKS
Click to expand...
Click to collapse
Why would you send it back?
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-us998-us99820a040330-kdz-t3786337
See the US998 Oreo KDZ (plural) in Development section and update with one of those. If you care about bootloader unlock and root, don't update to 20D first. Use 20A or 20B, unlock bootloader then update to 20D.
Instructions are in post #1 of the thread.
THANKS!!!!!
ChazzMatt said:
Why would you send it back?
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-us998-us99820a040330-kdz-t3786337
See the US998 Oreo KDZ (plural) in Development section and update with one of those. If you care about bootloader unlock and root, don't update to 20D first. Use 20A or 20B, unlock bootloader then update to 20D.
Instructions are in post #1 of the thread.
Click to expand...
Click to collapse
Thanks for the info... do appreciate it!!!!!!
I was just wondering why my phone will not automatically do an OTA update to Oreo???
I'm new to this flashing stuff & don't what to brick my phone.
PLUS... I'm concerned that LG Bridge could not read my software version...
Cheers,
mm_hockey said:
Thanks for the info... do appreciate it!!!!!!
I was just wondering why my phone will not automatically do an OTA update to Oreo???
I'm new to this flashing stuff & don't what to brick my phone.
PLUS... I'm concerned that LG Bridge could not read my software version...
Cheers,
Click to expand...
Click to collapse
1) My three "original" (genuine) US998 bought from B&H Photo were only recognized as having older software one time by LG Bridge. All the other times I had to update them manually with the dev patched LGUP and full image KDZ.
2) It's entirely possible it's not an an "original" US998, but is a converted LS998. Ever since we discovered Frankenstein, so have eBay sellers. Carrier unlocked US998 is more valuable, versatile.
3) Full image KDZ is better than partial image OTA. However, LG Bridge should work to do that, but apparently doesn't.
ChazzMatt.... THANKS!!!
I followed your directions... used LGUP/Uppercut and it worked perfectly!!!!
I'm now on US99820b.
I would like to root my phone (so I can delete some bloat and use advanced features in Tasker).
And then upgrade to US99820d using the "Upgrade" button on LGUP/Uppercut. (I think this correct??)
Could you point me the right direction (I'm a noob with this stuff) to root the phone.
I don't plan of installing any custom ROMs so I don't think I will need TWRP??? Or to unlock the bootloader???
Thanks again for all your help!!!!
Cheers,
ChazzMatt said:
Why would you send it back?
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-us998-us99820a040330-kdz-t3786337
See the US998 Oreo KDZ (plural) in Development section and update with one of those. If you care about bootloader unlock and root, don't update to 20D first. Use 20A or 20B, unlock bootloader then update to 20D.
Instructions are in post #1 of the thread.
Click to expand...
Click to collapse
ChazzMatt said:
1) My three "original" (genuine) US998 bought from B&H Photo were only recognized as having older software one time by LG Bridge. All the other times I had to update them manually with the dev patched LGUP and full image KDZ.
2) It's entirely possible it's not an an "original" US998, but is a converted LS998. Ever since we discovered Frankenstein, so have eBay sellers. Carrier unlocked US998 is more valuable, versatile.
3) Full image KDZ is better than partial image OTA. However, LG Bridge should work to do that, but apparently doesn't.
Click to expand...
Click to collapse
mm_hockey said:
ChazzMatt.... THANKS!!!
I followed your directions... used LGUP/Uppercut and it worked perfectly!!!!
I'm now on US99820b.
I would like to root my phone (so I can delete some bloat and use advanced features in Tasker).
And then upgrade to US99820d using the "Upgrade" button on LGUP/Uppercut. (I think this correct??)
Could you point me the right direction (I'm a noob with this stuff) to root the phone.
I don't plan of installing any custom ROMs so I don't think I will need TWRP??? Or to unlock the bootloader???
Thanks again for all your help!!!!
Cheers,
Click to expand...
Click to collapse
Now that you are actually on Oreo, future updates will use dev patched LGUP instead of Uppercut. Uppercut won't work on Oreo.
You need bootloader unlock and TWRP to root.
See the WTF bootloader unlock and root thread.
https://forum.xda-developers.com/lg-v30/how-to/wtf-lg-v30-t3790500
After that, you can update to 20D.
Sent via open market LG US998 V30/V30+
ChazzMatt said:
Why would you send it back?
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-us998-us99820a040330-kdz-t3786337
See the US998 Oreo KDZ (plural) in Development section and update with one of those. If you care about bootloader unlock and root, don't update to 20D first. Use 20A or 20B, unlock bootloader then update to 20D.
Instructions are in post #1 of the thread.
Click to expand...
Click to collapse
The link you provided goes to your thread in which the old 20b kdz is for H930 (according to android file host website). Yet the OP has US998.
Is it still ok for people like the OP who have US998 to update to H930 20b KDZ and then unlock bootloader or should we stick with kdz for the US998 only?
CCJ22 said:
The link you provided goes to your thread in which the old 20b kdz is for H930 (according to android file host website). Yet the OP has US998.
Is it still ok for people like the OP who have US998 to update to H930 20b KDZ and then unlock bootloader or should we stick with kdz for the US998 only?
Click to expand...
Click to collapse
No, it doesn't. You're confused about something. The link you quoted in your post goes to all the US998 KDZ thread.
In that thread, all the links go to to specific US998 KDZ -- 20A, 20B, and 20D.
I can't help how Android Host Files categorizes stuff. My folder is simply "V30" -- and inside that I have over a dozen US998, Hong Kong H930DS, Canadian H933, European H930 KDZ. Don't overthink it. If the file name says US998 it's US998.
Here's a screenshot of my Android Host Files folders. All my V30 stuff is inside the V30 folder, period.. If Android Host Files then categorizes that as H930 -- for whatever reason, that's not me and I have no control over that.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ChazzMatt said:
No, it doesn't. You're confused about something. The link you quoted in your post goes to all the US998 KDZ.
Click to expand...
Click to collapse
Hi Chazz, I think Android file host is confused. Which caused the confusion for me. Here is the screenshot. Notice the H930 portion? Odd right?
CCJ22 said:
Hi Chazz, I think Android file host is confused. Which caused the confusion for me. Here is the screenshot. Notice the H930 portion? Odd right?
Click to expand...
Click to collapse
See my screenshot. I have v30 folder, a generic Android folder, a Moto Maxx folder. All my V30 KDZ are inside my V30 folder. I do not have any folders or sub-folders called H930. I have an H930 KDZ with a dozen other KDZ inside my V30 folder.
Here's all my V30 KDZ listings:
https://androidfilehost.com/?a=show&w=files&flid=241704
I think Android Host Files calls ALL V30 "H930". I saw another person question another developer about this, "Is it safe to flash because it's in the H930 folder?" I want to yell, Look at the KDZ title!" Of course it's safe.
ChazzMatt said:
See my screenshot. I have v30 folder, a generic Android folder, a Moto Maxx folder. All my V30 KDZ are inside my V30 folder. I do not have any folders or sub-folders called H930. I have an H930 KDZ with half a dozen other KDZ inside my V30 folder.
I think Android Host Files calls ALL V30 "H930". I saw another person question another developer about this, "Is it safe to flash because it's in the H930 folder?" I want to yell, LOOK AT THE KDZ TITLE!" Of course it's safe.
---------- Post added at 11:23 PM ---------- Previous post was at 11:22 PM ----------
See my screenshot. I have v30 folder, a generic Android folder, a Moto Maxx folder. All my V30 KDZ are inside my V30 folder. I do not have any folders or sub-folders called H930. I have an H930 KDZ with half a dozen other KDZ inside my V30 folder.
I think Android Host Files calls ALL V30 "H930". I saw another person question another developer about this, "Is it safe to flash because it's in the H930 folder?" I want to yell, LOOK AT THE KDZ TITLE!" Of course it's safe.
Here's all my V30 KDZ listings:
https://androidfilehost.com/?a=show&w=files&flid=241704
Click to expand...
Click to collapse
Ha! Nice. Thank you for your help. I noticed the file name. Then android file host saying H930 and thought, dang I better be careful. Thanks again mate. Cheers
CCJ22 said:
Ha! Nice. Thank you for your help. I noticed the file name. Then android file host saying H930 and thought, dang I better be careful. Thanks again mate. Cheers
Click to expand...
Click to collapse
You're welcome. Sorry for the duplicate answers. My computer is acting wonky.
Questions on Frankenstein phone on US99820b
Hi ChazzMatt,
I also do have a few newbie questions on the Frankenstein phone.
Thanks to you great tutorial I upgraded from AT&T H931 successfully to the US998 (FW: US99820b).
I am not interested in bootloader unlock or rooting the device.
1. Why does the phone not upgrade to US99820d via OTA or LG Bridge? Any way to turn that on?
2. How do I best upgrade to US99820d? Using the Upgrade function in the modified LGUP and your 20d KDZ file?
Would that require a total reset of the phone with all my personal data?
3. Does that also apply to Security Updates? Do they have to be done manually through 20x KDZ updates?
Thanks,
Scusa
scusa2000 said:
Hi ChazzMatt,
I also do have a few newbie questions on the Frankenstein phone.
Thanks to you great tutorial I upgraded from AT&T H931 successfully to the US998 (FW: US99820b).
I am not interested in bootloader unlock or rooting the device.
1. Why does the phone not upgrade to US99820d via OTA or LG Bridge? Any way to turn that on?
2. How do I best upgrade to US99820d? Using the Upgrade function in the modified LGUP and your 20d KDZ file?
Would that require a total reset of the phone with all my personal data?
3. Does that also apply to Security Updates? Do they have to be done manually through 20x KDZ updates?
Thanks,
Scusa
Click to expand...
Click to collapse
Simple "upgrade" using LGUP will update to newer KDZ while keeping data. (This is only if you do not have TWRP.) Make sure you choose "UPGRADE", and not any other option. By the way, 20E is the latest posted in the US998 KDZ thread.
Takes 5 minutes, you keep all your settings and data.
scusa2000 said:
Hi ChazzMatt,
...
1. Why does the phone not upgrade to US99820d via OTA or LG Bridge? Any way to turn that on?
...
Click to expand...
Click to collapse
I also have a supposed US998 from ebay and would like to know why it will not update. Does LG block updates to phones if they have been cross-flashed to a different version (if that's what happened)? Are these sellers knowingly selling phones that cannot be updated normally?
Thanks!
clipcarl said:
I also have a supposed US998 from ebay and would like to know why it will not update. Does LG block updates to phones if they have been cross-flashed to a different version (if that's what happened)? Are these sellers knowingly selling phones that cannot be updated normally?
Thanks!
Click to expand...
Click to collapse
I have the exact same situation, V30+ from eBay and no OTAs - had to flash manually. For what I paid for this hardware I'm more than willing to live with the minor inconvenience of having to download a KDZ and flash it for updates, but I would also much prefer it if I could get the OTAs. I'm guessing it has to do with it being Frankensteined and LG only pushing OTAs to it for the original ROM, which it is no longer running...but I would love to know if anyone has a more formal understanding of this issue.
techlover10 said:
I have the exact same situation, V30+ from eBay and no OTAs - had to flash manually. For what I paid for this hardware I'm more than willing to live with the minor inconvenience of having to download a KDZ and flash it for updates, but I would also much prefer it if I could get the OTAs. I'm guessing it has to do with it being Frankensteined and LG only pushing OTAs to it for the original ROM, which it is no longer running...but I would love to know if anyone has a more formal understanding of this issue.
Click to expand...
Click to collapse
I have three original US998 V30/V30+ and NONE have gotten OTA except one time with Nougat. Since then I've had to manually update via LGUP.
Last weekend, I just manually updated my wife from 20A to 20E via Dev Patched LGUP. Bootloader is still locked on hers, came back from LG with new display a couple of months ago. B&H Photo US998 V30.
I actually prefer full image KDZ to partial image OTA. And while it's true OTA is probably based on IMEI, that doesn't explain why I'm not being offered OTA, at least with hers which has not been modified in any way.
holy crap. I've been away from xda (or flashing phones) for too long!
I just bought v30+ us998 on ebay and it seems like LS998 convert. so in order to unlock bootloader, I have to flash to 20a or b first? Or can I do it now (7.1.2) and update to latest one 20e?
what's good apps these days for rooted phones?
larciel said:
I just bought v30+ us998 on ebay and it seems like LS998 convert. so in order to unlock bootloader, I have to flash to 20a or b first? Or can I do it now (7.1.2) and update to latest one 20e?
what's good apps these days for rooted phones?
Click to expand...
Click to collapse
Read WTF INSTRUCTIONS.
For US998 yes, you need early Oreo 20A or 20B to unlock bootloader, install TWRP -- then you can update to US998 20E by flashing 20E "ROM" (stock firmware KDZ in TWRP-FLASHABLE zip file)
@ChazzMatt,
First, thanks for all your help. After I noticed my LG V30+ was not receiving updates, I was able to update the software to US99820b following your instructions. However, I still have one point I am not clear about.
Correct if I am wrong but, from what I understood, you recommend to update to 20a or b in case I am planning to root my device (since rooting after updating to 20d would not work). In case I am not planning to root, Can I use the same process to, using LGUP, to update straight to 20d?
Is there any specific reason why I'd want to root my device before upgrading to 20d?
Thanks again,
DC
Excuse me. I bought a old V30 and I search IMEI know the phone type is AS998. Then I unlocked bootloader and flash US998 20a. In LG Bridge prompt me can update to 20b. But in phone OTA had nothing. Who can teach me how to OTA on phone. I won't want to use LG Bridge.
有本事 said:
Excuse me. I bought a old V30 and I search IMEI know the phone type is AS998. Then I unlocked bootloader and flash US998 20a. In LG Bridge prompt me can update to 20b. But in phone OTA had nothing. Who can teach me how to OTA on phone. I won't want to use LG Bridge.
Click to expand...
Click to collapse
Then use dev patched LGUP.
You can't use OTA with TWRP.
Sent via open market LG US998 V30/V30+
ChazzMatt said:
Then use dev patched LGUP.
You can't use OTA with TWRP.
Sent via open market LG US998 V30/V30+
Click to expand...
Click to collapse
I use official system. And I haven't root or flash TWRP.
有本事 said:
I use official system. And I haven't root or flash TWRP.
Click to expand...
Click to collapse
Then use dev patched LGUP.
Because you've changed to another variant you won't receive inferior partial image OTA update, you have to flash superior full image KDZ.
Easy. Takes 5 minutes. Upgrade option via LGUP. You keep all your data and settings.
Sent via open market LG US998 V30/V30+
ChazzMatt said:
Then use dev patched LGUP.
Because you've changed to another variant you won't receive inferior partial image OTA update, you have to flash superior full image KDZ.
Easy. Takes 5 minutes. Upgrade option via LGUP. You keep all your data and settings.
Sent via open market LG US998 V30/V30+
Click to expand...
Click to collapse
Oh, thanks. Now I had been update to 20b. But which is the latest version. And can I jump versions to update.
有本事 said:
Oh, thanks. Now I had been update to 20b. But which is the latest version. And can I jump versions to update.
Click to expand...
Click to collapse
20E is the latest. I post latest versions as they are released. Be sure to choose upgrade option in LGUP.
See the US998 KDZ thread. My
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-us998-us99820a040330-kdz-t3786337
ChazzMatt said:
20E is the latest. I post latest versions as they are released. Be sure to choose upgrade option in LGUP.
See the US998 KDZ thread. My
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-us998-us99820a040330-kdz-t3786337
Click to expand...
Click to collapse
Thanks, I'll do that.
Hi again guys,
Do you know if the V30 US998 will get eventually the Pie update or I'll need to reconvert my V30 to H933?
Thanks for the answer!
Yes the US998 pie beta is already out so you will get it. Perhaps later than other models though
AxelR11 said:
Hi again guys,
Do you know if the V30 US998 will get eventually the Pie update or I'll need to reconvert my V30 to H933?
Thanks for the answer!
Click to expand...
Click to collapse
Of course it will get Pie. Every variant will get Pie.
Sent via open market LG US998 V30/V30+
Rahul721 said:
Yes the US998 pie beta is already out so you will get it. Perhaps later than other models though
Click to expand...
Click to collapse
Oh! I've didn't see it in the forums
Thank you! :good:
ChazzMatt said:
Of course it will get Pie. Every variant will get Pie.
Sent via open market LG US998 V30/V30+
Click to expand...
Click to collapse
Ok! Thanks for the information :good:
https://www.mylgphones.com/lg-v30-us998-android-9-pie-beta-firmware-v28a.html
redoregon said:
https://www.mylgphones.com/lg-v30-us998-android-9-pie-beta-firmware-v28a.html
Click to expand...
Click to collapse
Thanks for the link
But, if I do the update to Pie beta, can I later upgrade the beta ROM to the official one? Does the phone stay rooted with TWRP and unlocked bootloader?
Thanks for the answers!
Yes on TWRP if you pick "partition DL" on kDZ and unchecked "recovery and recovery bak" partitions (preserving TWRP recovery) OR use TWRP flashable zip created from kdz. Neither will close the bootloader. Root needs Magisk 19.4 zip flashing afterwards
---------- Post added at 08:52 PM ---------- Previous post was at 08:51 PM ----------
AxelR11 said:
Thanks for the link
But, if I do the update to Pie beta, can I later upgrade the beta ROM to the official one? Does the phone stay rooted with TWRP and unlocked bootloader?
Thanks for the answers!
Click to expand...
Click to collapse
See above
LG V30 US998 Android Pie (9.0) update now available
https://www.mylgphones.com/lg-v30-us998-android-pie-9-0-update-now-available.html
asialove2013 said:
LG V30 US998 Android Pie (9.0) update now available
https://www.mylgphones.com/lg-v30-us998-android-pie-9-0-update-now-available.html
Click to expand...
Click to collapse
US998 KDZ thread is now unlocked and live.
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-us998-us99830a000704-kdz-t3952256/
Hello friend, I hope you are well. @ChazzMatt
I have installed us98830a beta pie in my Stock oreo us988h .... And after the update PHOTO, the phone has stuck in the logo, help please ....
I have a few hours trying to solve this error with ADB, the mobile is stuck in boot logo after trying to update US988h to US98830ft ... Please help-
Yeriorlando said:
Hello friend, I hope you are well. @ChazzMatt
I have installed us98830a beta pie in my Stock oreo us988h .... And after the update PHOTO, the phone has stuck in the logo, help please ....
I have a few hours trying to solve this error with ADB, the mobile is stuck in boot logo after trying to update US988h to US98830ft ... Please help-
Click to expand...
Click to collapse
I answered in thread. You didn't follow instructions.
You tried FOTA update with full image KDZ with TWRP custom recovery INSTALLED.
I never ever have mentioned using FOTA and I never will. I specifically say IN THE INSTRUCTIONS do NOT mess with LGUP modes not mentioned in the instructions.
I am stuck
I converted from 931 to 998 oreo 20a and when i try to upgrade to 998 pie 30a it gets stuck at boot and i have to roll back every time to 20a when it happens, ANY HELP PLEASE ?
Hashtagkem said:
I converted from 931 to 998 oreo 20a and when i try to upgrade to 998 pie 30a it gets stuck at boot and i have to roll back every time to 20a when it happens, ANY HELP PLEASE ?
Click to expand...
Click to collapse
First, there is no US998 30a. You're trying to flash US998 30b.
See the top sentence of attached screenshot. It's right there at the top of the KDZ post where found US998 30b.
If you don't want to do all the steps of the workaround, then you should do see least update to most recent Oreo US998B 20h, from the same KDZ thread you got 20a.
EDIT:
I also just answered your almost identical question in the KDZ thread, but saw this one first. The thread is a better place to ask.
I Tried to Update But Cant Possible.
Any One How to update LG V30 AS998?
Plz Tell Me I am New in Community ?
waseemrehmat said:
I Tried to Update But Cant Possible.
Any One How to update LG V30 AS998?
Plz Tell Me I am New in Community [emoji20]
Click to expand...
Click to collapse
This is not really the right place to ask this question, so the thread will be moved by a mod. Q&A Section is better. (EDIT: Mod just moved it. Thank you!)
To update AS998, see Frankenstein instructions. Convert to US998, then update to latest Oreo US998.
I also already answered you in Frankenstein thread yesterday:
_____
waseemrehmat said:
I want yo update my LG V30 AS998 to Pie Update.
Click to expand...
Click to collapse
You keep saying that in several non-relevant thread... but do you mean stock LG Pie or Linage-based custom ROM Pie? Stock firmware Pie is still being rolled out.
(I'm still on rooted Oreo firmware myself.)
If you want Lineage custom ROMs then you need to bootloader unlock and root, and flash custom ROMs. See WTF INSTRUCTIONS for that.
If you want just stock firmware Pie update, then convert to latest US998 Oreo and wait for US998 Pie. See Frankenstein instructions.
Or what I've done -- bootloader unlock, install TWRP, root, THEN update to latest Oreo US998.
waseemrehmat said:
Is AS998 Converted to US998.
Click to expand...
Click to collapse
What AS998 firmware are you on right now? Nougat, like 10d or early Oreo like 20a?
Yes, you can convert regional carrier AS998 to US988, using the Frankenstein instructions.
READ them carefully. Follow them carefully.
The only caveat is some AS998 were actually former LS998 converted by eBay dealers, using Octopus box to carrier unlock the Sprint LS998. In at least one instance, an AS998 user could NOT successfully Frankenstein to US998 -- due to something the Octopus box "broke".
Sent via open market LG US998 V30/V30+
ChazzMatt said:
This is not really the right place to ask this question, so the thread will be moved by a mod. Q&A Section is better.
To update AS998, see Frankenstein instructions. Convert to US998, then update to latest Oreo US998.
I also already answered you in Frankenstein thread yesterday:
_____
You keep saying that in several non-relevant thread... but do you mean stock LG Pie or Linage-based custom ROM Pie? Stock firmware Pie is still being rolled out.
(I'm still on rooted Oreo firmware myself.)
If you want Lineage custom ROMs then you need to bootloader unlock and root, and flash custom ROMs. See WTF INSTRUCTIONS for that.
If you want just stock firmware Pie update, then convert to latest US998 Oreo and wait for US998 Pie. See Frankenstein instructions.
Or what I've done -- bootloader unlock, install TWRP, root, THEN update to latest Oreo US998.
What AS998 firmware are you on right now? Nougat, like 10d or early Oreo like 20a?
Yes, you can convert regional carrier AS998 to US988, using the Frankenstein instructions.
READ them carefully. Follow them carefully.
The only caveat is some AS998 were actually former LS998 converted by eBay dealers, using Octopus box to carrier unlock the Sprint LS998. In at least one instance, an AS998 user could NOT successfully Frankenstein to US998 -- due to something the Octopus box "broke".
Sent via open market LG US998 V30/V30+
Click to expand...
Click to collapse
My Software Version is Android Oreo AS99820b
waseemrehmat said:
My Software Version is Android Oreo AS99820b
Click to expand...
Click to collapse
Then follow the Frankenstein instructions to convert to US998.
US998 Nougat
Master Reset
US998 Oreo. Go to 20h directly if you don't care about bootloader unlock and root. Or go to US998 20a temporarily, use WTF instructions to bootloader unlock, then go to US998 20h.
Wait for US998 Pie.
I've answered you several times. There's no alternate answers. You just have to go do it.
ChazzMatt said:
Then follow the Frankenstein instructions to convert to US998.
US998 Nougat
Master Reset
US998 Oreo. Go to 20h directly if you don't care about bootloader unlock and root. Or go to US998 20a temporarily, use WTF instructions to bootloader unlock, then go to US998 20h.
Wait for US998 Pie.
I've answered you several times. There's no alternate answers. You just have to go do it.
Click to expand...
Click to collapse
Any Video Available?
waseemrehmat said:
Any Video Available?
Click to expand...
Click to collapse
Not by me. But I provided screenshots in the Frankenstein instructions and you can use Google Translate in a web browser to translate entire page to your language.
Sent via open market LG US998 V30/V30+
ChazzMatt said:
Not by me. But I provided screenshots in the Frankenstein instructions and you can use Google Translate in a web browser to translate entire page to your language.
Sent via open market LG US998 V30/V30+
Click to expand...
Click to collapse
Provide the Screenshot s
ChazzMatt said:
I provided screenshots in the Frankenstein instructions and you can use Google Translate in a web browser to translate entire page to your language.
Click to expand...
Click to collapse
waseemrehmat said:
Provide the Screenshot s
Click to expand...
Click to collapse
They are already there. I wouldn't have said I provided them if they weren't there.
9 screenshots already attached to the Frankenstein instructions post. They've been there since April 2018.
You need to go read the Instructions and look at them.
Use this Google Translate tool.
http://itools.com/tool/google-translate-web-page-translator
Put in the URL of the Frankenstein post:
https://forum.xda-developers.com/showpost.php?p=76510671&postcount=168
Sent via open market LG US998 V30/V30+
I updated my AS998 Oreo to US998 Pie
I followed Frankenstein instructions and here is how it went:
1. Flashed (PARTITION DL) NOUGAT US998 but after connecting to LGUP again it still showed AS998 and UPGRADE to Oreo US998 was not allowed.
2. Flashed (PARTITION DL) Oreo US998 and it worked.
3. Flashed (UPGRADE) Pie downloaded from here.
01eg.art said:
I followed Frankenstein instructions and here is how it went:
1. Flashed (PARTITION DL) NOUGAT US998 but after connecting to LGUP again it still showed AS998 and UPGRADE to Oreo US998 was not allowed.
2. Flashed (PARTITION DL) Oreo US998 and it worked.
3. Flashed (UPGRADE) Pie downloaded from here.
Click to expand...
Click to collapse
Hello. I have AS998 oreo, i want to update pie. can you show me Instruction? please help me
EXTREMPOWER said:
Hello. I have AS998 oreo, i want to update pie. can you show me Instruction? please help me
Click to expand...
Click to collapse
See the post you quoted. It has the links for instructions. All the other posts on page 1 also give you more information about the process.
Hello friends, I do not know if I have really damaged my phone. It is the h931 model converted to us998. Because of my desire to have a foot, I installed a KDZ of the European model h930. At the beginning the rom started without problems, after I noticed that it had no signal, I installed the Oreo us998 modem and it was still without a signal, so I went back to oreo us99820h and when it starts the screen it is welcome, the touch does not work for me. Any solution to this problem, I would appreciate suggestions and help. Thank you so much ♥
Yeriorlando said:
Hello friends, I do not know if I have really damaged my phone. It is the h931 model converted to us998. Because of my desire to have a foot, I installed a KDZ of the European model h930. At the beginning the rom started without problems, after I noticed that it had no signal, I installed the Oreo us998 modem and it was still without a signal, so I went back to oreo us99820h and when it starts the screen it is welcome, the touch does not work for me. Any solution to this problem, I would appreciate suggestions and help. Thank you so much ♥
Click to expand...
Click to collapse
You screwed up.
NEVER NEVER NEVER flash stock H930* firmware over any North American variants. It says so in all the Instructions.
You ignored all warnings. WHY? Every Pie H93O* KDZ and TWRP flashable zip says "ONLY for H930, H930G, H930D, H930DS. Do NOT ask if others can flash this!"
Flash back to US998 Nougat to repair your damage. PARTITION DL, all partitions in Dev Patched LGUP.
Then use one of the 4 workarounds in post #6 of the US998 PIE KDZ thread to update to US998 Pie.
Did you not read about those? They are mentioned top of post #2. Go to Post #6 of the US998 Pie KDZ. Workaround #3 and #4 work for everyone. Two people yesterday said #4 worked for them.
Here's one:
sisiimaji said:
This is great, I have follow Method #4 it works very well, I've been waiting for so long to achieved it . :good:
Click to expand...
Click to collapse
Go to first page and scroll down to post #6...
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-us998-us99830a000704-kdz-t3952256
same problem
ChazzMatt said:
You screwed up.
NEVER NEVER NEVER flash stock H930* firmware over any North American variants. It says so in all the Instructions.
You ignored all warnings. WHY? Every Pie H93O* KDZ and TWRP flashable zip says "ONLY for H930, H930G, H930D, H930DS. Do NOT ask if others can flash this!"
Flash back to US998 Nougat to repair your damage. PARTITION DL, all partitions in Dev Patched LGUP.
Then use one of the 4 workarounds in post #6 of the US998 PIE KDZ thread to update to US998 Pie.
Did you not read about those? They are mentioned top of post #2. Go to Post #6 of the US998 Pie KDZ. Workaround #3 and #4 work for everyone. Two people yesterday said #4 worked for them.
Here's one:
Go to first page and scroll down to post #6...
https://forum.xda-developers.com/lg-v30/development/us998-lg-v30-us998-us99830a000704-kdz-t3952256
Click to expand...
Click to collapse
Hello friend, thank you very much, method #4 worked perfectly for me. The problem is that the touch still does not respond .... Too bad!
woww.. It would be taking him to a technician or something. I didn't want to lose my phone that way.
Yeriorlando said:
Hello friend, thank you very much, method #4 worked perfectly for me. The problem is that the touch still does not respond .... Too bad!
woww.. It would be taking him to a technician or something. I didn't want to lose my phone that way.
Click to expand...
Click to collapse
Try temporarily flashing back to US998 Nougat via Partition DL mode, all partitions. See if that fixes touch. Then update to US998 Pie again.
same problem
ChazzMatt said:
Try temporarily flashing back to US998 Nougat via Partition DL mode, all partitions. See if that fixes touch. Then update to US998 Pie again.
Click to expand...
Click to collapse
The problem remains the same, brother. I just flashed Nougat and nothing.
Yeriorlando said:
The problem remains the same, brother. I just flashed Nougat and nothing.
Click to expand...
Click to collapse
I'm almost out of answers. All I can suggest is Partition DL to H933 Nougat. Temporarily. See if that works, then back to US998 Nougat, then update back to US998 Pie.
Is it possible your digitizer just happened to fail same time you were doing all this?
same problem
ChazzMatt said:
I'm almost out of answers. All I can suggest is Partition DL to H933 Nougat. Temporarily. See if that works, then back to US998 Nougat, then update back to US998 Pie.
Is it possible your digitizer just happened to fail same time you were doing all this?
Click to expand...
Click to collapse
Exactly, I think that by flashing that KDZ h930, some file or something that handles the hardware of the screen has broken.
fff
ChazzMatt said:
I'm almost out of answers. All I can suggest is Partition DL to H933 Nougat. Temporarily. See if that works, then back to US998 Nougat, then update back to US998 Pie.
Is it possible your digitizer just happened to fail same time you were doing all this?
Click to expand...
Click to collapse
Hello Friend. I've been thinking and well, could you tell me that a "Dump" file,? Could you solve the problem with that or is it more risky?
Yeriorlando said:
Hello Friend. I've been thinking and well, could you tell me that a "Dump" file,? Could you solve the problem with that or is it more risky?
Click to expand...
Click to collapse
Never used Dump file, so don't know. That's a function of LGUP where you can theoretically restore original partitions if you have a "dump" prior to making any changes. You've already made changes.