Hi. I have an LG Stylo 3 Plus (32GB) on Telus, with a locked bootloader and no root.
I am trying to enter recovery mode to clear all the caches, however doing
Code:
adb reboot recovery
just takes me to the screen that says "no command" and has the android on its back.
What key combination do I use to enter recovery? I have tried volume down when plugging in a USB cable, however that just brought up fastboot for unlocking the bootloader.
after you flash a new recovery, take the battery off, an right away press the volume down + power button until you see logo. When you see the logo, just take your finger off the power button and press it again
Related
I have a LG D805 locked to Telcel in Mexico and tried to SIM unlock by unlock code.
After SIM unlock, I can't get the local mobile operator's signal and the the problem was started there.
Rooted by ioroot24 and
SuperSU, FreeGee,Titanium Backup Pro were installed
installed CWM and ROM manager and backed up files.
Then flashed D805_panama_stock.zip for testing.
Failed to get the signal. and then flashed D805_10A-724_RADIO.zip
Tried to wipe data / cache by factory hard reset.
After factory hard reset, Everything's gone and Just LG logo boot loop.
Now,
Press and hold power, then I can turn it off.
When g2 is turned off,
Press and hold Volume + button and plug in USB, then can't enter Download mode
When g2 is turned off,
Press and hold Volume - and Power at the same time until LG logo's on and release them and
Press and hold them again and then press Power buttom 3 times , then Factory Hard Reset.
again enter into LG Logo boot loop status.
When g2 is turned on,
Tried to communicate thru ADB but not listed.
When g2 is turned off,
Press and hold Volume + & - and Power button at the same time,
can get emergency mode when the touch panel doesn't work.
Tried to do it by using Ubuntu's terminal command but the problem is now that
the computer does not recognize g2.
while installed KOUSH universal ADB driver.
Is there any ways to have PC to recognize g2 ?
Thanks in advance any clues and advise to catch g2 by PC in this case.
So I've been putting custom ROMs on devices for years and I've never had this problem before.
Problem: I can't get into Recovery (TWRP) after I've flashed it but before MIUI restores stock recovery.
I've tried:
1) Holding Vol Up + Power as I hit "fastboot reboot"<Enter> in fastboot
2) Running the power down while in fastboot, giving it a little charge, and then holding Vol Up + Power
3) Locking the bootloader and trying both 1 & 2 again
Result
- Without locking the bootloader I get the "unlocked bootloader" message, have to hit Vol UP and then it boots into System
- With a locked bootloader it ignores my "Vol Up + Power" altogether and just boots into System
For the fun of it I tried Vol Down + Power (to get into fastboot) and had the same problem. Funny thing is if I flash back to stock, VOL UP + POWER gets me into recovery just fine.
Any ideas?
Flash the TWRP
udaan said:
Flash the TWRP
Click to expand...
Click to collapse
Not very helpful. Problem is not flashing TWRP but getting into it. Bu thanks.
Getting into Recovery on the Mi Pad 2 [Latte] [SOLVED]
LinuxLowell said:
So I've been putting custom ROMs on devices for years and I've never had this problem before.
Problem: I can't get into Recovery (TWRP) after I've flashed it but before MIUI restores stock recovery.
I've tried:
1) Holding Vol Up + Power as I hit "fastboot reboot"<Enter> in fastboot
2) Running the power down while in fastboot, giving it a little charge, and then holding Vol Up + Power
3) Locking the bootloader and trying both 1 & 2 again
Result
- Without locking the bootloader I get the "unlocked bootloader" message, have to hit Vol UP and then it boots into System
- With a locked bootloader it ignores my "Vol Up + Power" altogether and just boots into System
For the fun of it I tried Vol Down + Power (to get into fastboot) and had the same problem. Funny thing is if I flash back to stock, VOL UP + POWER gets me into recovery just fine.
Any ideas?
Click to expand...
Click to collapse
So I figured it.. reading a post in the MIUI forum (XDA won't let me include the link), I found the following:
Turn off your Mi Pad 2, Press power button to turn on Mipad 2, when MI LOGO appeared, immediately Hold down VOL UP and VOL DOWN until you see the yellow line DNX FASTBOOT MODE appears, release the buttons.
Click to expand...
Click to collapse
My problem was I was pressing both buttons at the same time as I do with my other devices. Solution is 1) Press power button, 2) wait for MI logo to appear in the center of the screen, 3) Press VOL UP. Voila!
I connect my Lg G5 H850 to PC, open a cmd prompt and I can find it in the adb devices list. But if I try the command: "adb reboot bootloader", it reboot but not in recovery mode. If I try manul recovery mode ( push Vol DN and Power ) it doesn't work too.
What can I try ? Can you help me ?
Thanks
Power down, hold VOL DN and connect LG G5 to the PC ( fastboot start automatically ).
I believe that by default the LG g5 does not have a recovery the closest to that is the method you describe: shut down, turn on with volume down and power button, when you see the LG logo you let go the power button for a second then you press it again (you don't let go the volume down button In any moment) then you see a white screen with some text that asks if you want to wipe the phone, you have to select the "yes" option twice and it will wipe the phone, if you have a custom recovery installed (twrp) it will boot into twrp if not it will only wipe the phone
Hello! i don't know how but my rooted Mi A3 last night decided on its own to update to Android 10. So i woke up with all of mine Magisk magic all gone. I tried to root again but my phone is stuck on the 'Mi' boot screen.
So here's the situation:
if i press volume up + power button, instead of entering recovery mode the "no Command" screen shows up;
if i try to fastboot, my pc doesn't recognize anymore my device;
There is any another way to enter recovery mode? Can i flash a boot image on a sd card? Do i have to throw away my beloved xiaomi?
You have most probably incompatible Magisk module which prevents phone from booting Android 10. Flash stock boot image to get phone working (fastboot should work, double check your drivers etc.).
Or perform factory reset from stock recovery:
"If presented with an image of a broken Android with "No Command" shown on the screen, do the following:
- Press and hold the Power button.
- While holding the Power button press the Volume Up button then release the Volume Up button then the Power button."
I can not boot into recovery mode on my unlocked S7 since I need top press power to get past the warning, but that only works if no other button is pressed, and I then boot to the system not recovery. I've watched multiple youtube videos and read up nothing seems to work as you need to hold Power and Vol+, yet you can not do this with an unlocked boot loader.
ERIC
You need to hold it through that warning.. so soon as screen goes black press and hold power and vol+ until you see recovery screen.. or u can use adb reboot recovery or if rooted theres apps that can reboot to recovery or even from magisk manager